Node-RED使用指南：14:Inject节点的触发方式
这篇文章介绍一下Inject节点除了手动触发之外的其他方式。
事前准备
以容器方式启动Node-RED服务，启动命令如下所示：
启动命令：docker run -it -p 1880:1880 -v $PWD/data:/data -e TZ=Asia/Shanghai --name nodered -d nodered/node-red:1.0.4
触发方式1: Deploy时触发
-
Inject节点设定：注意选中Inject once复选框
-
Debug节点设定：显示topic属性内容
-
flow的json表示（export输出结果）
[{"id":"347308fb.329ec8","type":"inject","z":"73554227.4474dc","name":"Deploy时触发","topic":"Deploy时会被触发","payload":"","payloadType":"date","repeat":"","crontab":"","once":true,"onceDelay":0.1,"x":160,"y":120,"wires":[["bae1bac5.1ad7a8"]]},{"id":"bae1bac5.1ad7a8","type":"debug","z":"73554227.4474dc","name":"显示topic信息","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"topic","targetType":"msg","x":400,"y":120,"wires":[]}]
- 结果确认
执行Deploy操作之后，可以看到结果显示如下图所示：
触发方式2: 指定时间间隔重复触发
-
Inject节点设定：设定每3秒触发
-
Debug节点设定：显示topic属性内容
-
flow的json表示（export输出结果）
[{"id":"347308fb.329ec8","type":"inject","z":"73554227.4474dc","name":"每三秒钟触发","topic":"每三秒触发","payload":"","payloadType":"date","repeat":"3","crontab":"","once":false,"onceDelay":0.1,"x":160,"y":120,"wires":[["bae1bac5.1ad7a8"]]},{"id":"bae1bac5.1ad7a8","type":"debug","z":"73554227.4474dc","name":"显示topic信息","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"topic","targetType":"msg","x":400,"y":120,"wires":[]}]
- 结果确认
执行Deploy操作之后，可以看到结果显示如下图所示：
触发方式3: 指定时间触发
-
Inject节点设定：指定周日20:02触发
-
Debug节点设定：显示topic属性内容
-
flow的json表示（export输出结果）
[{"id":"347308fb.329ec8","type":"inject","z":"73554227.4474dc","name":"周日20:02触发","topic":"指定周日20:02触发","payload":"","payloadType":"date","repeat":"","crontab":"02 20 * * 0","once":false,"onceDelay":0.1,"x":160,"y":120,"wires":[["bae1bac5.1ad7a8"]]},{"id":"bae1bac5.1ad7a8","type":"debug","z":"73554227.4474dc","name":"显示topic信息","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"topic","targetType":"msg","x":400,"y":120,"wires":[]}]
- 结果确认
执行Deploy操作之后，等到周日的20:02可以看到结果显示如下图所示：
