Collision
Time Limit: 2000/1000 MS (Java/Others) Memory Limit: 32768/32768 K (Java/Others)Total Submission(s): 1071 Accepted Submission(s): 402
Special Judge
Problem Description
There's a round medal fixed on an ideal smooth table, Fancy is trying to throw some coins and make them slip towards the medal to collide. There's also a round range which shares exact the same center as the round medal, and radius of the medal is strictly less than radius of the round range. Since that the round medal is fixed and the coin is a piece of solid metal, we can assume that energy of the coin will not lose, the coin will collide and then moving as reflect.
Now assume that the center of the round medal and the round range is origin ( Namely (0, 0) ) and the coin's initial position is strictly outside the round range.
Given radius of the medal R m, radius of coin r, radius of the round range R, initial position (x, y) and initial speed vector (vx, vy) of the coin, please calculate the total time that any part of the coin is inside the round range. Please note that the coin might not even touch the medal or slip through the round range.
Now assume that the center of the round medal and the round range is origin ( Namely (0, 0) ) and the coin's initial position is strictly outside the round range.
Given radius of the medal R m, radius of coin r, radius of the round range R, initial position (x, y) and initial speed vector (vx, vy) of the coin, please calculate the total time that any part of the coin is inside the round range. Please note that the coin might not even touch the medal or slip through the round range.
Input
There will be several test cases. Each test case contains 7 integers R
m, R, r, x, y, vx and vy in one line. Here 1 ≤ R
m < R ≤ 2000, 1 ≤ r ≤ 1000, R + r < |(x, y)| ≤ 20000, 1 ≤ |(vx, vy)| ≤ 100.
Output
For each test case, please calculate the total time that any part of the coin is inside the round range. Please output the time in one line, an absolute error not more than 1e -3 is acceptable.
Sample Input
5 20 1 0 100 0 -1 5 20 1 30 15 -1 0
Sample Output
30.000 29.394
简单的几何问题，但写的过程中有以下问题需要注意：
判断硬币射向的方向不能用x0/y0=x1*c/y1来写，因为可能会出现精度问题，应该利用圆心在（0,0）这个条件
利用向量求解：
a*b＝|a|*|b|*cos＝√[(m²+n²)*(p²+q²)]*cos＝(mp+nq)
所以cos＝(mp+nq)／√[(m²+n²)*(p²+q²)]
通过判断cos的正负来判断夹角是否为钝角来免去精度问题
刚开始没有想到利用原点，是通过求与圆的交点，然后利用向量解的，最后判断向量同向的时候还是死在了x0/y0=x1*c/y1上,非常僵硬。
刚开始写的，改了精度后的代码(AC):
#include
#include
#include
#include
#include
#include
#include 利用（0,0）后AC的代码：
#include
#include
#include
#include
#include
#include
#include