树莓派3安装kali后的配置

1.烧写Kali

2.SSH连接到Kali（root/toor），建议kali和路由器之间用网线连接

3.配置源：nano /etc/apt/source.list

#阿里云kali源
deb http://mirrors.aliyun.com/kali kali-rolling main non-free contrib
deb-src http://mirrors.aliyun.com/kali kali-rolling main non-free contrib
deb http://mirrors.aliyun.com/kali-security kali-rolling/updates main contrib non-free
deb-src http://mirrors.aliyun.com/kali-security kali-rolling/updates main contrib non-free


#中科大kali源
deb http://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib
deb-src http://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib
deb http://mirrors.ustc.edu.cn/kali-security kali-current/updates main contrib non-free
deb-src http://mirrors.ustc.edu.cn/kali-security kali-current/updates main contrib non-free

4.更新：apt-get update && apt-get upgrade && apt-get dist-upgrade && apt-get clean

5.开启远程连接：

apt-get install vnc4server tightvncserver

apt-get install xrdp

6.启动远程连接：

sudo service xrdp restart，如果远程还是连接不了，就查看防火墙情况，包括主机和树莓派的 

7.重新调整磁盘大小/扩展磁盘

apt-get install gparted，然后

gparted启动软件（这是图形界面软件，所以需要先远程到桌面），如果提示没有该命令，就从菜单中找

8.完全安装kali

apt-get install kali-linux-full