（华为）路由器PPPoE_Client、PPPoE_Server、Nat_Easy 配置
（华为）路由器PPPoE_Client、PPPoE_Server、Nat_Easy 配置
SW1：
display current-configuration
#
sysname SW1
#
vlan batch 3 5 10
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
#
interface Vlanif3
ip address 172.16.3.254 255.255.255.0
#
interface Vlanif5
ip address 172.16.5.254 255.255.255.0
#
interface Vlanif10
ip address 172.16.10.254 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
port link-type access
port default vlan 3
#
interface Ethernet0/0/2
port link-type access
port default vlan 5
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
port link-type access
port default vlan 10
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
ip route-static 0.0.0.0 0.0.0.0 172.16.10.253
#
user-interface con 0
user-interface vty 0 4
#
return
R1（PPPoE_Client）：
display current-configuration
[V200R003C00]
#
sysname R1
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
acl number 2001
rule 1 permit source 172.16.0.0 0.0.255.255
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface Dialer1
link-protocol ppp
ppp pap local-user admin password cipher %$%$ocCDBTU]TXvAJe2qJ]{Q,.%3%$%$
ip address ppp-negotiate
dialer user admin
dialer bundle 1
dialer-group 1
nat outbound 2001
#
interface GigabitEthernet0/0/0
pppoe-client dial-bundle-number 1 on-demand
#
interface GigabitEthernet0/0/1
ip address 172.16.10.253 255.255.255.0
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
dialer-rule
dialer-rule 1 ip permit
#
ip route-static 0.0.0.0 0.0.0.0 Dialer1
ip route-static 172.16.0.0 255.255.0.0 172.16.10.254
interface g0/0/1
ip add 172.16.10.253 24
ip route-static 172.16.0.0 16 172.16.10.254
dialer-rule
dialer-rule 1 ip permit //设置拨号规则来发起PPPoE会话的条件（使用IP协议）
quit
interface dialer 1 //创建并进入Dialer接口
dialer user admin //配置对端用户名，这个用户名必须与对端服务器上的PPP用户名相同。
dialer-group 1 //将该接口放置于一个拨号访问组中。
dialer bundle 1 //指定Dialer接口使用的Dialer bundle。设备通过Dialer bundle将物理接口与拨号接口关联起来。
ppp pap local-user chinaitwang password cipher chinaitwang //配置用户名密码
ip add ppp-negotiate //IP地址协商获得。
link-protocol ppp //一般默认为该协议，不需要配置。
interface g0/0/0
pppoe-client dial-bundle-number 1 on-demand
quit
ip route-static 0.0.0.0 0.0.0.0 dialer 1 //用来实现Dialer Bundle和物理接口的绑定，用来指定PPPoE会话对应的Dialer Bundle，其中number是与PPPoE会话相对应的Dialer Bundle编号。On-demand表示PPPoE会话工作在按需拨号模式。
R2（PPPoE_Server）：
display current-configuration
[V200R003C00]
#
sysname R2
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
ip pool 1
network 1.1.1.0 mask 255.255.255.0
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$xzC~K2#m6M-%xWFR$U\Kf)*#%$%$
local-user admin service-type ppp
#
firewall zone Local
priority 15
#
interface Virtual-Template1
ppp authentication-mode pap
remote address pool 1
ip address 1.1.1.1 255.255.255.0
#
interface GigabitEthernet0/0/0
pppoe-server bind Virtual-Template 1
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
interface LoopBack0
ip address 2.2.2.2 255.255.255.0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
interface loopback 0
ip add 2.2.2.2 24
interface virtual-template 1 //建立虚拟模板接口1
ppp authentication-mode pap //配置ppp验证类型为pap
ip add 1.1.1.1 255.255.255.0
remote address pool 1 //对端地址为地址池1里面的
interface g0/0/0
pppoe-server bind virtual-template 1 //该接口绑定到虚拟模板接口1
aaa //配置aaa用户名密码
local-user admin password cipher admin
quit
ip pool 1 //配置地址池
network 1.1.1.0 mask 255.255.255.0
HC（华为）路由器PPPoE_Client、PPPoE_Server 配置