XFCE窗口管理器（XFWM4）

先录网文于此以示敬意，然后再将我的学习记录附后。http://wiki.xfce.org/zh-cn/howto/xfwm4_theme

Xfwm4 主题 how-to

 

介绍

Xfwm4 是 Xfce4 的原生的窗口管理器，它使用一种简单而灵活基于像素图的主题引擎，使用 .xpm 格式的图像。Xfwm4 还使用一个文本文件，配置其他选项（见 themerc 小节）。此外，你还可以选用 gtk 主题颜色，这将文档在 gtk 颜色小节说到。

主题的存放位置

在 Xfwm4 版本 4.0 中，主题搜索在下列目录：

• 用户主目录/.themes/xfwm4/theme_name（例如: /home/joe/.themes/xfwm4/b5）
• 系统共享数据目录/xfwm4/theme_name（例如: /usr/share/xfwm4/themes/b5）

在 Xfwm 版本 4.2 中，主题的存放位置是符合标准的，在下列目录搜索：

• 用户主目录/.themes/theme_name/xfwm4（例如： /home/joe/.themes/b5/xfwm4）
• 系统共享数据目录/themes/theme_name/xfwm4（例如： /usr/share/themes/b5/xfwm4）

标题栏修饰

因为窗口可以处于激活的¹⁾或者非激活²⁾两种状态。所以 xfwm4 使用相应命名的像素图，例如，title-1-active.xpm 或者 title-1-inactive.xpm。

对于标题栏的修饰，xfwm4 使用 5 张名为 title-1-active.xpm 到 title-5-active.xpm 的像素图以及 top-left-active.xpm 和 top-right-active.xpm 组成两端的角如下图所示。

非激活 xfwm4 窗口像素图使用一样的命名约定，只是单词换为 inactive；例如，title-1-inactive.xpm。

标题文字的颜色和阴影选项，对齐方式等在 themerc 文件中设置（在 themerc 小节详述）。

窗口侧边和底部

每一个窗口的侧边由两个像素图构成。左侧边的像素图叫 left-active.xpm 和 bottom-left-active.xpm 。右侧边（当然）也就是由 right-active.xpm 和 bottom-right.active.xpm 构成。

窗口底部的控制条由 bottom-active.xpm 和 bottom-inactive.xpm 构成；当窗口大小改变时它们会被重复填充。

注意：这些像素图也构成鼠标控制柄，当你决定它们需要多少像素宽度时，请记住这一点（特别是左下和右下像素图，它们构成窗口主要的缩放控制柄）。

Xfwm4 按钮

xfwm4 最多可以使用 6 种动作按钮 —— stick(sticky 窗口)，菜单，折叠，隐藏，最大化和关闭。

按钮有激活的³⁾或者非激活⁴⁾和按下三种状态。如图 3 所示： AbiWord 图片 menu-active.gif AbiWord 图片 menu-inactive.gif AbiWord 图片 image_2.gif

图 3 - Xfwm4 按钮状态

Xfwm4 也使用切换按钮，来指示按钮是否被切换 —— 见图4 AbiWord 图片 stick-active.gif AbiWord 图片 stick-inactive.gif AbiWord 图片 stick-pressed.gif AbiWord 图片 stick-toggled-active.gif AbiWord 图片 image_3.gif AbiWord 图片 stick-toggled-pressed.gif

图 4 - 带额外切换按钮的粘附按钮

themerc 文件

xfwm4 使用 themerc 这个文本文件设置一些，比如标题文本的颜色，button_spacing 或者 button_offset 等等特性。它包含在主题的像素图的文件夹中。

按钮布局

也可以为特定主题定义固定的按钮布局。但需要提醒应该避免强制特定的按钮布局或者标题对齐及其他降低用户选择的设定（除非主题真的需要那样，比如下面会提到的 b5 主题）

# button_layout :
#    O = Option menu
#    T = Stick
#    H = hide
#    S = shade
#    M = maximize
#    C = close
#    | = title
button_layout=OTS|HMC

现实的例子是，B5 主题只使用了关闭按钮。也就是 themerc 文件中写的是button_layout=C|

标题宽度

另外一个需要在 themerc 文件中设置的项为 title_full_width。这个布尔值确定怎么安排标题栏中的像素图。

当设置为 true 时，中间的像素图被重复填充整个窗口宽度：

当设置为 false 时，中间的像素图被重复填充到适合标题的宽度：

文本阴影

通过设置 title_shadow_active（激活窗口）或 title_shadow_inactive（对其他非激活窗口）为标题文本添加一个阴影。

可用的值为：false，true，和 frame。

标题偏移

标题文本的位置，可以用偏移量来调整以适应主题设计。水平和垂直偏移的值可以用下面的设置项来调整：

• title_horizontal_offset
• title_vertical_offset_active
• title_vertical_offset_inactive

Button offset and spacing

Simlilarily, the buttons can be shifted horizontally by using the “button offset” setting. It's worth noting that the value is relative to the corresponding application window border, not the frame border.

The “button_spacing” value gives the number of pixels between each button.

Gtk Color pickup

As you have no doubt noticed when using Xfwm4's default theme it is possible to make themes “pick-up” gtk theme colours. It's not just running the gimp and draw the buttons. Most themes use a color symbol table. That means the xpm file must be opened and edited by hand.

The color symbols are as follow :

Name	Description
active_text_color	Text color on title for active window
inactive_text_color	Text color on title for inactive window
active_border_color	Very rarely used usually set to black
inactive_border_color	Idem
active_color_1	Background color for active title
active_color_2	Background color for active window
active_hilight_1	Lighter color for active title for 3D look
active_hilight_2	Lighter color for active window
active_mid_1	Slightly darker color for active title
active_mid_2	Slightly darker color for active window
active_shadow_1	Darker color for active title for 3D look
active_shadow_2	Darker color for active window
inactive_color_1	Background color for inactive title
inactive_color_2	Background color for inactive window
inactive_hilight_1	Lighter color for inactive title for 3D look
inactive_hilight_2	Lighter color for inactive window
inactive_mid_1	Slightly darker color for inactive title
inactive_mid_2	Slightly darker color for inactive window
inactive_shadow_1	Darker color for inactive title for 3D look
inactive_shadow_2	Darker color for inactive window

The symbols get replaced by the actual color values at runtime so that the window borders inherits GTK theme colors automatically. Xpm file format used natively by xfwm4 is no more than a plain text file that can be edited with your favorite text editor.

From Wikipedia, the free encyclopedia.

XPM (X PixMap) is an ASCII image format used by the X Window System. It was created in 1989 by Daniel Dardailler and Colas Nahaboo working in Inria Laboratories, France, and was later enhanced by Arnaud Le Hors. It is intended primarily for creating icons, and supports transparent color. It has a simple structure, deriving from the earlier XBM syntax. It can be created and manipulated using any text editor and can be included in a C language file.

Therefore, if you open an xpm file with your favorite text editor, you'll see something like this:

/* XPM */
static char * title_2_active_xpm[] = {
"5 21 10 1",
"       c None",
".      c #000000",
"+      c #FFFFFF s active_hilight_2",
"@      c #D5D6D5 s active_color_2",
"#      c #4B58A2 s active_shadow_1",
"$      c #525FAB s active_color_1",
"%      c #848FD6 s active_mid_1",
"&      c #B4BAB4 s active_mid_2",
"*      c #949594 s active_shadow_2",
"=      c #FFFFFF s active_hilight_1",
".....",
"++++#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@#",
"@@@@@",
"@@@@@"};

Not going too deep into the details of the XPM format, an XPM image is made of different sections, the values that describe the format of the image, the colors that compose the image, the pixels (and there is also the extensions, but it's safe to ignore them for now)

A character is assigned to each color of the image (if the image has more colors than available charaters, then more than a single character can be assiged to a colors). If a color symbol is specified, the given color will be ignored and replaced by the corresponding color in the color symbol table.

To get the gtk colors applied to your theme, you need to edit the XPM files and add the proper color symbols to the color definition table.

"       c None",
".      c #000000",
"+      c #FFFFFF",
"@      c #D5D6D5",
"#      c #4B58A2",
"$      c #525FAB",
"%      c #848FD6",
"&      c #B4BAB4",
"*      c #949594",
"=      c #FFFFFF",

must be changed to

"       c None",
".      c #000000",
"+      c #FFFFFF s active_hilight_2",
"@      c #D5D6D5 s active_color_2",
"#      c #4B58A2 s active_shadow_1",
"$      c #525FAB s active_color_1",
"%      c #848FD6 s active_mid_1",
"&      c #B4BAB4 s active_mid_2",
"*      c #949594 s active_shadow_2",
"=      c #FFFFFF s active_hilight_1",

As a matter of fact, “thinking” of the gtk colors as early as drawing the theme can save a lot of time in this phase. If you use the exact same color across all the pixmaps, you can use the Search/Replace functionnality of the text editor to add the color symbols. You could even use a tool such as “sed” to perform mass changes in all the XPM files of the theme.

Xfwm 4.2 new functionality

As simple as it is, the color symbol replacement table of the XPM format is not powerfull enough to achive the nice color gradients seen in most recent themes.

Xfwm 4.2 includes yet another functionality that gives real nice result while being still compatible with the previous theme format: It composes the final image from the XPM file and it colors replacement table, and another PNG file with transparency, if present.

The names of the PNG files are identical to the names of the corresponding XPM files, with the ”.png” file extension (ie title-1-active.png, top-right-inactive.png, etc.). The PNG file is by no mean required, if it's not present, xfwm4 won't complain, but if there is a PNG image of the same name as the XPM image, and if that PNG has an alpha channel (ie, it has semi-transparent pixels) then the PNG image will be automatically layered on top of the XPM image to produce the final image.

This technique has several advantages:

• It's fairly simple from a theme designer point of view, most people are working with similar techniques when composing themes with tools such as The GIMP.
• It's backward compatible with xfwm4 from Xfce 4.0, the PNG files are just ignored by xfwm4 4.0.

Conclusion

I hope this small “how-to” for creating themes for xfwm4 will help you design your own themes. It would be great if you could share your themes with others on http://www.themedepot.org (which is the prefered site for xfce related themes) or from http://themes.freshmeat.net.

you can also find xfce theme at http://www.xfce-look.org

List of frame and button part names

This is a list of all possible part names in a decoration, so you can easily copy and paste them. (Tip: if using Firefox hold Ctrl while dragging, to select cells instead of lines. )

Active	Inactive	Pressed (buttons only)
menu-active	menu-inactive	menu-pressed
shade-active	shade-inactive	shade-pressed
stick-active	stick-inactive	stick-pressed
hide-active	hide-inactive	hide-pressed
maximize-active	maximize-inactive	maximize-pressed
close-active	close-inactive	close-pressed
top-left-active	top-left-inactive
title-1-active	title-1-inactive
title-2-active	title-2-inactive
title-3-active	title-3-inactive
title-4-active	title-4-inactive
title-5-active	title-5-inactive
top-right-active	top-right-inactive
right-active	right-inactive
bottom-right-active	bottom-right-inactive
bottom-active	bottom-inactive
bottom-left-active	bottom-left-inactive
left-active	left-inactive

Credits

This how-to has been started by Drewbian (drewbian at tsn dot cc) and later modifed by Olivier Fourdan (fourdan at xfce dot org).

¹⁾ , ³⁾ 获得焦点

²⁾ , ⁴⁾ 失去焦点

zh-cn/howto/xfwm4_theme.txt · Last modified: 2013/01/20 14:00 by haobug

----------------------------------------------

下载主题后存放在用户的.themes文件夹里。在主题文件夹里有个xfwm4就是主题的窗口管理器了。路径如：~/.themes/Leopardish/xfwm4 。

xfwm4这里面都是一些xpm图像文件，你可以自己设计那些图像，这样就可以打造自己的窗口了。好自由！鼠标移动到按钮上显示图像，这个效果类似于html中超链接的hover，也是一个图像文件，只不过名字叫做prelight，例如：maximize-prelight.xpm。

附上Leopardish的xfwm4文件：

 http://files.cnblogs.com/ibgo/xfwm4.zip

 

转载于:https://www.cnblogs.com/ibgo/archive/2013/02/13/2911027.html