How To Create A Mole Whacking Game with Cocos2D: Part 2/2

How To Create A Mole Whacking Game with Cocos2D: Part 2/2

Like this post? Follow me on Twitter!

Whack that laugh off this mole's face!

This article is the second part of a 2 part series on how to create a mole whacknig game with Cocos2D. This series brings together a lot of concepts from other cocos2D tutorials on this site, and introduces some new concepts along the way as well.

In the first part of the series, we created the basics of the game – cute little moles popping out of holes. We spent a lot of time thinking about how to organize the art and coordinates so that the game would look good on the iPhone, iPad, and Retina display – and be efficient too!

In this article, we’ll add some cute animations to the mole as he laughs and gets whacked, add gameplay so you can do the whacking and earn points, and of course add some gratuitous sound effects as usual.

If you don’t have it already, grab a copy of the project where we left things off in the last tutorial.

Defining Animations: Practicalities

To make the game a little more fun, we’re going to give the mole two animations. First, he’ll laugh a little when he pops out of the hole (to make you really want to whack him!), then if you do manage to whack him he’ll make a “just got whacked” face.

But before we begin, let’s talk about the practicalities of defining our animations in code.

Recall from the cocos2d animations tutorial that one of the steps to create an animation is to create a list of sprite frames. So for each different image in your animation, you have to add the sprite frame for that sprite into an array like this:

[animFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"myImage.png"]];

Our mole’s laugh animation is going to be these images in this order: mole_laugh1.png, mole_laugh2.png mole_laugh3.png, mole_laugh2.png, mole_laugh3.png, mole_laugh1.png.

So we could hard-code a bunch of lines to set up our animation, like this:

[animFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"mole_laugh1.png"]]; [animFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"mole_laugh2.png"]]; [animFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"mole_laugh3.png"]]; [animFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"mole_laugh2.png"]]; // And so on...

But that would make our code kind of ugly. To make things a bit cleaner, instead of defining the images in the animation in code, we’ll bring them out to a property list instead.

Property Lists

If you haven’t used property lists before, they are special files you can create in XCode to contain data like arrays, dictionaries, strings, numbers, and so on in a hierarchial format. It’s extremely easy to create these, and just as easy to read them from code.

Let’s see what I mean by trying this out in XCode. Right click on Resources, choose “Add/New File…”, choose “Mac OS X/Resource/Property List”, and click “Next”. Name the new file “laughAnim.plist”, and click Finish. At this point the property list editor for laughAnim.plist should be visible, as shown below:

Every property list has a root element. This is usually either an array or a dictionary. This property list is going to contain an array of image names that make up the laugh animation, so click on the second column for the root element (Type, currently set to Dictionary), and change it to Array.

Next, click the small button to the far right that looks like three lines – this adds a new entry to the array. By default, the type of the entry is a String – which is exactly what we want. Change the value to “mole_laugh1.png” for the first entry in the animation.

Click the + button to add a new row, and repeat to add all of the frames of the animation, as shown below:

Next, repeat the process for the animation to play when the mole is hit. Follow the same steps as above to create a new property list named hitAnim.plist, and set it up as shown below:

Now, time to add the code to load these animations. Start by opening up HelloWorldScene.h and add a member variable for each animation, as shown below:

// Inside @interface HelloWorld CCAnimation *laughAnim; CCAnimation *hitAnim;

These will be used to keep a handy reference to each CCAnimation so it can be easily found and reused in the code.

Next add a method to create a CCAnimation based on the images defined in the property list, as follow:

- (CCAnimation *)animationFromPlist:(NSString *)animPlist delay:(float)delay {   NSString *plistPath = [[NSBundle mainBundle] pathForResource:animPlist ofType:@"plist"]; // 1 NSArray *animImages = [NSArray arrayWithContentsOfFile:plistPath]; // 2 NSMutableArray *animFrames = [NSMutableArray array]; // 3 for(NSString *animImage in animImages) { // 4 [animFrames addObject:[[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:animImage]]; // 5 } return [CCAnimation animationWithFrames:animFrames delay:delay]; // 6   }

This is important to understand, so let’s go through it line by line.

1. The property list is included in the project file, so it’s in the app’s “main bundle”. This helper method gives a full path to a file in the main bundle, which you’ll need to read in the property list.
2. To read a property list, it’s as easy as calling a method on NSArray called arrayWithContentsOfFile and passing in the path to the property list. It will return an NSArray with the contents (a list of strings for the image names in the animatoin, in this case). Note this works because we set the root element to be an NSArray. If we had set it to a NSDictionary, we could use [NSDictionary dictionaryWithContentsOfFile...] instead.
3. Creates an empty array that will store the animation frames.
4. Loops through each image name in the array read from the property list.
5. Gets the sprite frame for each image and adds it to the array.
6. Returns a CCAnimation based on the array of sprite frames.

Next, add the code to the end of your init method to call this helper function for each animation:

laughAnim = [self animationFromPlist:@"laughAnim" delay:0.1]; hitAnim = [self animationFromPlist:@"hitAnim" delay:0.02]; [[CCAnimationCache sharedAnimationCache] addAnimation:laughAnim name:@"laughAnim"]; [[CCAnimationCache sharedAnimationCache] addAnimation:hitAnim name:@"hitAnim"];

Note that after squirreling away a reference to the animation, it adds it to the animation cache. This is important to do so that the animations are saved off (and retained) somewhere. It’s also helpful since you could retrieve them from the animation cache by name if you wanted (but we dont’ need to since we’re keeping a reference ourselves).

One last step – let’s use the animations (just the laugh one for now). Modify the popMole method to read as the following:

- (void) popMole:(CCSprite *)mole { CCMoveBy *moveUp = [CCMoveBy actionWithDuration:0.2 position:ccp(0, mole.contentSize.height)]; CCEaseInOut *easeMoveUp = [CCEaseInOut actionWithAction:moveUp rate:3.0]; CCAction *easeMoveDown = [easeMoveUp reverse]; CCAnimate *laugh = [CCAnimate actionWithAnimation:laughAnim restoreOriginalFrame:YES];   [mole runAction:[CCSequence actions:easeMoveUp, laugh, easeMoveDown, nil]]; }

The only difference here is that instead of delaying a second before popping down, it runs a CCAnimate action instead. The CCAnimate action uses the laughAnim set up earlier, and sets resotreOriginalFrame to YES so that when the animation is done, it reverts back to the normal mole face.

Compile and run your code, and now when the moles pop out, they laugh at you!

Time to wipe that smile off their faces and start whacking!

Adding Game Logic

We’re now going to add the gameplay logic into the game. The idea is a certain number of moles will appear, and you get points for each one you whack. You try to get the most number of points you can.

So we’ll need to keep track of the score, and also display it to the user. And when the moles are finished popping, we’ll need to tell the user about that as well.

So start by opening HelloWorldScene.h, and add the following instance variables to the HelloWorld layer:

CCLabelTTF *label; int score; int totalSpawns; BOOL gameOver;

These will keep track of the score label, the current score, the number of moles popped so far, and whether the game is over or not.

Next add the following to the end of your init method:

self.isTouchEnabled = YES;   float margin = 10; label = [CCLabelTTF labelWithString:@"Score: 0" fontName:@"Verdana" fontSize:[self convertFontSize:14.0]]; label.anchorPoint = ccp(1, 0); label.position = ccp(winSize.width - margin, margin); [self addChild:label z:10];

This first sets the layer as touch enabled, since you’ll want to detect when the player taps the screen. It then creates a label to show the score. Note that it sets the anchor point o the bottom right of the label so that it’s easy to place it in the lower right of the screen.

Also note that rather than pasing the font size directly, it goes through a helper function to convert the font size first. This is because the font size will need to be larger on the iPad, since it has a bigger screen. So implemenet convertFontSize next as the following:

- (float)convertFontSize:(float)fontSize { if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { return fontSize * 2; } else { return fontSize; } }

This is very simple – on the iPad the font size is doubled, otherwise it’s left alone.

Next we want to add the touch detection code to see if a touch has hit a mole. But before we can do that, we need to add a flag to the mole to the game knows whether the mole is currently tappable or not. The mole should only be able to be tapped while it’s laughing – while it’s moving or underground it’s “safe.”

We could create a subclass of CCSprite for the mole to keep track of this, but because we only need to store this one piece of information, we’ll use the userData property on the CCSprite instead. So add two helper methods and modify popMole one more time to do this as follows:

- (void)setTappable:(id)sender { CCSprite *mole = (CCSprite *)sender; [mole setUserData:TRUE]; }   - (void)unsetTappable:(id)sender { CCSprite *mole = (CCSprite *)sender; [mole setUserData:FALSE]; }   - (void) popMole:(CCSprite *)mole {   if (totalSpawns > 50) return; totalSpawns++;   [mole setDisplayFrame:[[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName:@"mole_1.png"]];   // Pop mole CCMoveBy *moveUp = [CCMoveBy actionWithDuration:0.2 position:ccp(0, mole.contentSize.height)]; CCCallFunc *setTappable = [CCCallFuncN actionWithTarget:self selector:@selector(setTappable:)]; CCEaseInOut *easeMoveUp = [CCEaseInOut actionWithAction:moveUp rate:3.0]; CCAnimate *laugh = [CCAnimate actionWithAnimation:laughAnim restoreOriginalFrame:YES]; CCCallFunc *unsetTappable = [CCCallFuncN actionWithTarget:self selector:@selector(unsetTappable:)]; CCAction *easeMoveDown = [easeMoveUp reverse];   [mole runAction:[CCSequence actions:easeMoveUp, setTappable, laugh, unsetTappable, easeMoveDown, nil]];   }

The changes to popMole are as follows:

• Right before the mole laughs, it runs a CCCallFunc action to call a specified method (setTappable). This method sets the userData property on the sprite to TRUE, which we’ll use to indicate whether the mole is tappable.
• Similarly, after the mole laughs, it uses a CCCAllFunc action to call unsetTappable, which sets the flag back to FALSE.
• The method also immediately returns if there has been 50 or more spawns, since 50 is the limit for this game.
• It resets the display frame of the sprite to the base image (“mole_1.png”) at the beginning of the method, since if the mole was hit last time, it will still be showing the “hit” image and will need to be reset.

Ok, now that the sprite has a userData flag indicating whether it can be tapped or not, we can finally add the tap detection code as follows:

-(void) registerWithTouchDispatcher { [[CCTouchDispatcher sharedDispatcher] addTargetedDelegate:self priority:kCCMenuTouchPriority swallowsTouches:NO]; }   -(BOOL) ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event { CGPoint touchLocation = [self convertTouchToNodeSpace:touch]; for (CCSprite *mole in moles) { if (mole.userData == FALSE) continue; if (CGRectContainsPoint(mole.boundingBox, touchLocation)) {   mole.userData = FALSE; score+= 10;   [mole stopAllActions]; CCAnimate *hit = [CCAnimate actionWithAnimation:hitAnim restoreOriginalFrame:NO]; CCMoveBy *moveDown = [CCMoveBy actionWithDuration:0.2 position:ccp(0, -mole.contentSize.height)]; CCEaseInOut *easeMoveDown = [CCEaseInOut actionWithAction:moveDown rate:3.0]; [mole runAction:[CCSequence actions:hit, easeMoveDown, nil]]; } } return TRUE; }

The registerWithTouchDispatcher method sets things up so that the ccTouchBegan method gets called for each touch. For more details on this and why this is useful, check out an explanation in the How To Make a Tile Based Game with Cocos2D Ttutorial.

The ccTouchBegan method converts the touch to coordinates in the layer, and loops through each mole. If the mole isn’t tappable (the userData is false), it skips to the next mole. Otherwise, it uses CGRectContainsPoint to see if the touch point is within the mole’s bounding box.

If the mole is hit, it sets the mole as no longer tappable, and increases the score. It then stops any running actions, plays the “hit” animation, and moves the mole immediately back down the hole.

One final step – add some code to update the score and check for the level complete condition at the beginning of tryPopMoles:

if (gameOver) return;   [label setString:[NSString stringWithFormat:@"Score: %d", score]];   if (totalSpawns >= 50) {   CGSize winSize = [CCDirector sharedDirector].winSize;   CCLabelTTF *goLabel = [CCLabelTTF labelWithString:@"Level Complete!" fontName:@"Verdana" fontSize:[self convertFontSize:48.0]]; goLabel.position = ccp(winSize.width/2, winSize.height/2); goLabel.scale = 0.1; [self addChild:goLabel z:10]; [goLabel runAction:[CCScaleTo actionWithDuration:0.5 scale:1.0]];   gameOver = true; return;   }

That’s it! Compile and run your code, and you should be able to whack moles and increase your score! How high of a score can you get?

Gratuitous Sound Effects

As usual, let’s add even more fun to the game with some zany sound effects. Download these sound effects I made with Garage Band and Audacity, unzip the file, and drag the sounds to your Resources folder. Make sure that “Copy items into destination group’s folder” is selected, and click Add.

Then make the following changes to HelloWorldScene.m:

// Add to top of file #import "SimpleAudioEngine.h"   // Add at the bottom of your init method [[SimpleAudioEngine sharedEngine] preloadEffect:@"laugh.caf"]; [[SimpleAudioEngine sharedEngine] preloadEffect:@"ow.caf"]; [[SimpleAudioEngine sharedEngine] playBackgroundMusic:@"whack.caf" loop:YES];   // Add at bottom of setTappable [[SimpleAudioEngine sharedEngine] playEffect:@"laugh.caf"];   // Add inside ccTouchBegan, inside the CGRectContainsPoint case [[SimpleAudioEngine sharedEngine] playEffect:@"ow.caf"];

Compile and run your code, and enjoy the groovy tunes!

Where To Go From Here?

Here is a sample project with all of the code we’ve developed so far in this tutorial series.

That’s it for this article series (at least for now) – but if you want, why not play with this project some more yourself? I’m sure you can come up with some good ideas for how to make things even better!

I’m curious to hear if you guys think this kind of tutorial series is helpful (making a complete game to reinforce concepts covered earlier and introduce a few more along the way), or if you guys prefer normal “concept” tutorials. So if you have any thoughts or this, or any other comments, please chime in below! :]

Category: iPad, iPhone

Tags: cocos2D, game, iOS, iPhone, sample code, tutorial

//

http://www.raywenderlich.com/2593/how-to-create-a-mole-whacking-game-with-cocos2d-part-2