计算机视觉：数据预处理-图像增广方法

数据预处理

在计算机视觉中，通常会对图像做一些随机的变化，产生相似但又不完全相同的样本。主要作用是扩大训练数据集，抑制过拟合，提升模型的泛化能力，常用的方法见下面的程序。

随机改变亮暗、对比度和颜色等

import numpy as np
import cv2
from PIL import Image, ImageEnhance
import random

# 随机改变亮暗、对比度和颜色等
def random_distort(img):
    # 随机改变亮度
    def random_brightness(img, lower=0.5, upper=1.5):
        e = np.random.uniform(lower, upper)
        return ImageEnhance.Brightness(img).enhance(e)
    # 随机改变对比度
    def random_contrast(img, lower=0.5, upper=1.5):
        e = np.random.uniform(lower, upper)
        return ImageEnhance.Contrast(img).enhance(e)
    # 随机改变颜色
    def random_color(img, lower=0.5, upper=1.5):
        e = np.random.uniform(lower, upper)
        return ImageEnhance.Color(img).enhance(e)

    ops = [random_brightness, random_contrast, random_color]
    np.random.shuffle(ops)

    img = Image.fromarray(img)
    img = ops[0](img)
    img = ops[1](img)
    img = ops[2](img)
    img = np.asarray(img)

    return img

随机填充

# 随机填充
def random_expand(img,
                  gtboxes,
                  max_ratio=4.,
                  fill=None,
                  keep_ratio=True,
                  thresh=0.5):
    if random.random() > thresh:
        return img, gtboxes

    if max_ratio < 1.0:
        return img, gtboxes

    h, w, c = img.shape
    ratio_x = random.uniform(1, max_ratio)
    if keep_ratio:
        ratio_y = ratio_x
    else:
        ratio_y = random.uniform(1, max_ratio)
    oh = int(h * ratio_y)
    ow = int(w * ratio_x)
    off_x = random.randint(0, ow - w)
    off_y = random.randint(0, oh - h)

    out_img = np.zeros((oh, ow, c))
    if fill and len(fill) == c:
        for i in range(c):
            out_img[:, :, i] = fill[i] * 255.0

    out_img[off_y:off_y + h, off_x:off_x + w, :] = img
    gtboxes[:, 0] = ((gtboxes[:, 0] * w) + off_x) / float(ow)
    gtboxes[:, 1] = ((gtboxes[:, 1] * h) + off_y) / float(oh)
    gtboxes[:, 2] = gtboxes[:, 2] / ratio_x
    gtboxes[:, 3] = gtboxes[:, 3] / ratio_y

    return out_img.astype('uint8'), gtboxes

随机裁剪

随机裁剪之前需要先定义两个函数，multi_box_iou_xywh和box_crop这两个函数将被保存在box_utils.py文件中。

import numpy as np

def multi_box_iou_xywh(box1, box2):
    """
    In this case, box1 or box2 can contain multi boxes.
    Only two cases can be processed in this method:
       1, box1 and box2 have the same shape, box1.shape == box2.shape
       2, either box1 or box2 contains only one box, len(box1) == 1 or len(box2) == 1
    If the shape of box1 and box2 does not match, and both of them contain multi boxes, it will be wrong.
    """
    assert box1.shape[-1] == 4, "Box1 shape[-1] should be 4."
    assert box2.shape[-1] == 4, "Box2 shape[-1] should be 4."


    b1_x1, b1_x2 = box1[:, 0] - box1[:, 2] / 2, box1[:, 0] + box1[:, 2] / 2
    b1_y1, b1_y2 = box1[:, 1] - box1[:, 3] / 2, box1[:, 1] + box1[:, 3] / 2
    b2_x1, b2_x2 = box2[:, 0] - box2[:, 2] / 2, box2[:, 0] + box2[:, 2] / 2
    b2_y1, b2_y2 = box2[:, 1] - box2[:, 3] / 2, box2[:, 1] + box2[:, 3] / 2

    inter_x1 = np.maximum(b1_x1, b2_x1)
    inter_x2 = np.minimum(b1_x2, b2_x2)
    inter_y1 = np.maximum(b1_y1, b2_y1)
    inter_y2 = np.minimum(b1_y2, b2_y2)
    inter_w = inter_x2 - inter_x1
    inter_h = inter_y2 - inter_y1
    inter_w = np.clip(inter_w, a_min=0., a_max=None)
    inter_h = np.clip(inter_h, a_min=0., a_max=None)

    inter_area = inter_w * inter_h
    b1_area = (b1_x2 - b1_x1) * (b1_y2 - b1_y1)
    b2_area = (b2_x2 - b2_x1) * (b2_y2 - b2_y1)

    return inter_area / (b1_area + b2_area - inter_area)

def box_crop(boxes, labels, crop, img_shape):
    x, y, w, h = map(float, crop)
    im_w, im_h = map(float, img_shape)

    boxes = boxes.copy()
    boxes[:, 0], boxes[:, 2] = (boxes[:, 0] - boxes[:, 2] / 2) * im_w, (
        boxes[:, 0] + boxes[:, 2] / 2) * im_w
    boxes[:, 1], boxes[:, 3] = (boxes[:, 1] - boxes[:, 3] / 2) * im_h, (
        boxes[:, 1] + boxes[:, 3] / 2) * im_h

    crop_box = np.array([x, y, x + w, y + h])
    centers = (boxes[:, :2] + boxes[:, 2:]) / 2.0
    mask = np.logical_and(crop_box[:2] <= centers, centers <= crop_box[2:]).all(
        axis=1)

    boxes[:, :2] = np.maximum(boxes[:, :2], crop_box[:2])
    boxes[:, 2:] = np.minimum(boxes[:, 2:], crop_box[2:])
    boxes[:, :2] -= crop_box[:2]
    boxes[:, 2:] -= crop_box[:2]

    mask = np.logical_and(mask, (boxes[:, :2] < boxes[:, 2:]).all(axis=1))
    boxes = boxes * np.expand_dims(mask.astype('float32'), axis=1)
    labels = labels * mask.astype('float32')
    boxes[:, 0], boxes[:, 2] = (boxes[:, 0] + boxes[:, 2]) / 2 / w, (
        boxes[:, 2] - boxes[:, 0]) / w
    boxes[:, 1], boxes[:, 3] = (boxes[:, 1] + boxes[:, 3]) / 2 / h, (
        boxes[:, 3] - boxes[:, 1]) / h

    return boxes, labels, mask.sum()

# 随机裁剪
def random_crop(img,
                boxes,
                labels,
                scales=[0.3, 1.0],
                max_ratio=2.0,
                constraints=None,
                max_trial=50):
    if len(boxes) == 0:
        return img, boxes

    if not constraints:
        constraints = [(0.1, 1.0), (0.3, 1.0), (0.5, 1.0), (0.7, 1.0),
                       (0.9, 1.0), (0.0, 1.0)]

    img = Image.fromarray(img)
    w, h = img.size
    crops = [(0, 0, w, h)]
    for min_iou, max_iou in constraints:
        for _ in range(max_trial):
            scale = random.uniform(scales[0], scales[1])
            aspect_ratio = random.uniform(max(1 / max_ratio, scale * scale), \
                                          min(max_ratio, 1 / scale / scale))
            crop_h = int(h * scale / np.sqrt(aspect_ratio))
            crop_w = int(w * scale * np.sqrt(aspect_ratio))
            crop_x = random.randrange(w - crop_w)
            crop_y = random.randrange(h - crop_h)
            crop_box = np.array([[(crop_x + crop_w / 2.0) / w,
                                  (crop_y + crop_h / 2.0) / h,
                                  crop_w / float(w), crop_h / float(h)]])

            iou = multi_box_iou_xywh(crop_box, boxes)
            if min_iou <= iou.min() and max_iou >= iou.max():
                crops.append((crop_x, crop_y, crop_w, crop_h))
                break

    while crops:
        crop = crops.pop(np.random.randint(0, len(crops)))
        crop_boxes, crop_labels, box_num = box_crop(boxes, labels, crop, (w, h))
        if box_num < 1:
            continue
        img = img.crop((crop[0], crop[1], crop[0] + crop[2],
                        crop[1] + crop[3])).resize(img.size, Image.LANCZOS)
        img = np.asarray(img)
        return img, crop_boxes, crop_labels
    img = np.asarray(img)
    return img, boxes, labels

随机缩放

# 随机缩放
def random_interp(img, size, interp=None):
    interp_method = [
        cv2.INTER_NEAREST,
        cv2.INTER_LINEAR,
        cv2.INTER_AREA,
        cv2.INTER_CUBIC,
        cv2.INTER_LANCZOS4,
    ]
    if not interp or interp not in interp_method:
        interp = interp_method[random.randint(0, len(interp_method) - 1)]
    h, w, _ = img.shape
    im_scale_x = size / float(w)
    im_scale_y = size / float(h)
    img = cv2.resize(
        img, None, None, fx=im_scale_x, fy=im_scale_y, interpolation=interp)
    return img

随机翻转

# 随机翻转
def random_flip(img, gtboxes, thresh=0.5):
    if random.random() > thresh:
        img = img[:, ::-1, :]
        gtboxes[:, 0] = 1.0 - gtboxes[:, 0]
    return img, gtboxes

随机打乱真实框排列顺序

# 随机打乱真实框排列顺序
def shuffle_gtbox(gtbox, gtlabel):
    gt = np.concatenate(
        [gtbox, gtlabel[:, np.newaxis]], axis=1)
    idx = np.arange(gt.shape[0])
    np.random.shuffle(idx)
    gt = gt[idx, :]
    return gt[:, :4], gt[:, 4]

图像增广方法汇总

# 图像增广方法汇总
def image_augment(img, gtboxes, gtlabels, size, means=None):
    # 随机改变亮暗、对比度和颜色等
    img = random_distort(img)
    # 随机填充
    img, gtboxes = random_expand(img, gtboxes, fill=means)
    # 随机裁剪
    img, gtboxes, gtlabels, = random_crop(img, gtboxes, gtlabels)
    # 随机缩放
    img = random_interp(img, size)
    # 随机翻转
    img, gtboxes = random_flip(img, gtboxes)
    # 随机打乱真实框排列顺序
    gtboxes, gtlabels = shuffle_gtbox(gtboxes, gtlabels)

    return img.astype('float32'), gtboxes.astype('float32'), gtlabels.astype('int32')

这里得到的img数据数值需要调整，需要除以255，并且减去均值和方差，再将维度从[H, W, C]调整为[C, H, W]。

img, gt_boxes, gt_labels, scales = get_img_data_from_file(record)
size = 512
img, gt_boxes, gt_labels = image_augment(img, gt_boxes, gt_labels, size)
mean = [0.485, 0.456, 0.406]
std = [0.229, 0.224, 0.225]
mean = np.array(mean).reshape((1, 1, -1))
std = np.array(std).reshape((1, 1, -1))
img = (img / 255.0 - mean) / std
img = img.astype('float32').transpose((2, 0, 1))
img

将上面的过程整理成一个get_img_data函数。

def get_img_data(record, size=640):
    img, gt_boxes, gt_labels, scales = get_img_data_from_file(record)
    img, gt_boxes, gt_labels = image_augment(img, gt_boxes, gt_labels, size)
    mean = [0.485, 0.456, 0.406]
    std = [0.229, 0.224, 0.225]
    mean = np.array(mean).reshape((1, 1, -1))
    std = np.array(std).reshape((1, 1, -1))
    img = (img / 255.0 - mean) / std
    img = img.astype('float32').transpose((2, 0, 1))
    return img, gt_boxes, gt_labels, scales

TRAINDIR = '/home/aistudio/work/insects/train'
TESTDIR = '/home/aistudio/work/insects/test'
VALIDDIR = '/home/aistudio/work/insects/val'
cname2cid = get_insect_names()
records = get_annotations(cname2cid, TRAINDIR)

record = records[0]
img, gt_boxes, gt_labels, scales = get_img_data(record, size=480)

img.shape

(3, 480, 480)

gt_boxes.shape

(50, 4)

gt_labels

array([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
       0, 4, 0, 0, 0, 0], dtype=int32)

scales

(1244.0, 1244.0)

批量数据读取与加速

下面的程序展示了如何读取一张图片的数据并加速，下面的代码实现了批量数据读取。

# 获取一个批次内样本随机缩放的尺寸
def get_img_size(mode):
    if (mode == 'train') or (mode == 'valid'):
        inds = np.array([0,1,2,3,4,5,6,7,8,9])
        ii = np.random.choice(inds)
        img_size = 320 + ii * 32
    else:
        img_size = 608
    return img_size

# 将 list形式的batch数据 转化成多个array构成的tuple
def make_array(batch_data):
    img_array = np.array([item[0] for item in batch_data], dtype = 'float32')
    gt_box_array = np.array([item[1] for item in batch_data], dtype = 'float32')
    gt_labels_array = np.array([item[2] for item in batch_data], dtype = 'int32')
    img_scale = np.array([item[3] for item in batch_data], dtype='int32')
    return img_array, gt_box_array, gt_labels_array, img_scale

# 批量读取数据，同一批次内图像的尺寸大小必须是一样的，
# 不同批次之间的大小是随机的，
# 由上面定义的get_img_size函数产生
def data_loader(datadir, batch_size= 10, mode='train'):
    cname2cid = get_insect_names()
    records = get_annotations(cname2cid, datadir)

    def reader():
        if mode == 'train':
            np.random.shuffle(records)
        batch_data = []
        img_size = get_img_size(mode)
        for record in records:
            #print(record)
            img, gt_bbox, gt_labels, im_shape = get_img_data(record, 
                                                             size=img_size)
            batch_data.append((img, gt_bbox, gt_labels, im_shape))
            if len(batch_data) == batch_size:
                yield make_array(batch_data)
                batch_data = []
                img_size = get_img_size(mode)
        if len(batch_data) > 0:
            yield make_array(batch_data)

    return reader

d = data_loader('/home/aistudio/work/insects/train', batch_size=2, mode='train')

img, gt_boxes, gt_labels, im_shape = next(d())

img.shape, gt_boxes.shape, gt_labels.shape, im_shape.shape

((2, 3, 352, 352), (2, 50, 4), (2, 50), (2, 2))

由于数据预处理耗时较长，可能会成为网络训练速度的瓶颈，所以需要对预处理部分进行优化。通过使用飞桨提供的API paddle.reader.xmap_readers可以开启多线程读取数据，具体实现代码如下。

import functools
import paddle

# 使用paddle.reader.xmap_readers实现多线程读取数据
def multithread_loader(datadir, batch_size= 10, mode='train'):
    cname2cid = get_insect_names()
    records = get_annotations(cname2cid, datadir)
    def reader():
        if mode == 'train':
            np.random.shuffle(records)
        img_size = get_img_size(mode)
        batch_data = []
        for record in records:
            batch_data.append((record, img_size))
            if len(batch_data) == batch_size:
                yield batch_data
                batch_data = []
                img_size = get_img_size(mode)
        if len(batch_data) > 0:
            yield batch_data

    def get_data(samples):
        batch_data = []
        for sample in samples:
            record = sample[0]
            img_size = sample[1]
            img, gt_bbox, gt_labels, im_shape = get_img_data(record, size=img_size)
            batch_data.append((img, gt_bbox, gt_labels, im_shape))
        return make_array(batch_data)

    mapper = functools.partial(get_data, )

    return paddle.reader.xmap_readers(mapper, reader, 8, 10)

d = multithread_loader('/home/aistudio/work/insects/train', batch_size=2, mode='train')

img, gt_boxes, gt_labels, im_shape = next(d())

img.shape, gt_boxes.shape, gt_labels.shape, im_shape.shape

((2, 3, 320, 320), (2, 50, 4), (2, 50), (2, 2))

至此，我们完成了如何查看数据集中的数据、提取数据标注信息、从文件读取图像和标注数据、图像增广、批量读取和加速等过程，通过multithread_loader可以返回img, gt_boxes, gt_labels, im_shape等数据，接下来就可以将它们输入到神经网络，应用到具体算法上了。

在开始具体的算法讲解之前，先补充一下读取测试数据的代码。测试数据没有标注信息，也不需要做图像增广，代码如下所示。

# 测试数据读取

# 将 list形式的batch数据 转化成多个array构成的tuple
def make_test_array(batch_data):
    img_name_array = np.array([item[0] for item in batch_data])
    img_data_array = np.array([item[1] for item in batch_data], dtype = 'float32')
    img_scale_array = np.array([item[2] for item in batch_data], dtype='int32')
    return img_name_array, img_data_array, img_scale_array

# 测试数据读取
def test_data_loader(datadir, batch_size= 10, test_image_size=608, mode='test'):
    """
    加载测试用的图片，测试数据没有groundtruth标签
    """
    image_names = os.listdir(datadir)
    def reader():
        batch_data = []
        img_size = test_image_size
        for image_name in image_names:
            file_path = os.path.join(datadir, image_name)
            img = cv2.imread(file_path)
            img = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
            H = img.shape[0]
            W = img.shape[1]
            img = cv2.resize(img, (img_size, img_size))

            mean = [0.485, 0.456, 0.406]
            std = [0.229, 0.224, 0.225]
            mean = np.array(mean).reshape((1, 1, -1))
            std = np.array(std).reshape((1, 1, -1))
            out_img = (img / 255.0 - mean) / std
            out_img = out_img.astype('float32').transpose((2, 0, 1))
            img = out_img #np.transpose(out_img, (2,0,1))
            im_shape = [H, W]

            batch_data.append((image_name.split('.')[0], img, im_shape))
            if len(batch_data) == batch_size:
                yield make_test_array(batch_data)
                batch_data = []
        if len(batch_data) > 0:
            yield make_test_array(batch_data)

    return reader