盈鹏飞嵌入式---OpenWRT在iMX6UL上面的移植与编译
选择
Target移植
内核移植
编译的错误 1. DEPEND的问题
要解决这个问题，需要在内核的CFLAG中添加 -fgnu89-inline
出现问题是因为我们没有正确的配置kernel module对应的item，但是因为我们暂时不需要，所以直接将其干掉即可：
4. 并发编译出错
一般是因为安装了gcp导致的，所以remove掉gcp即可。
编译的结果产物
这里面我们使用generic的rootfs即可。
启动
启动后发现buzzer不停的叫着，显然这个是因为内核dts配置有问题， 因此我们先使用默认的kernel + dtb先启动，以后再继续更改内核。启动参数为：
启动后的log如下，放在下面为以后可能有需要的做对比和参照
OpenWRT在最近的时期分裂出了LEDE出来，因此这就涉及到了这两个的选择。
前段时间，编译过LEDE用于树莓派3，于是想着直接使用以前的LEDE，这样子省去了下载，毕竟在国内下载很多source code可能需要很长的时间，如果没有proxy的话。于是想着省些事情就用起来了以前的LEDE来编译,但是编译过程中出现了很多错误， 因此最终我决定切回到OpenWRT，并且使用master上面新的代码来移植编译。
代码仓库：http://www.dwz.cn/5MODVb
OpenWRT配置
本身LEDE与OpenWRT里面已经有一个imx6 Cortex-A9的arch支持，因此直接选择这个为base来做Porting与Compile较为合适。配置如下：
Compile Tuning
因为imx6ul是Cortex-A7，所以我们需要更改一下
选择好Target之后，我们需要做移植工作。
移植需要将内核更改一把，这个位于：
$ ls target/Linux/imx6/
base-files config-3.14 config-4.4 files-4.4 image Makefile patches-4.4 profiles
base-files config-3.14 config-4.4 files-4.4 image Makefile patches-4.4 profiles
其中config-XX是内核的.config文件，注意不要有modules，全部用builtin，否则将会出错。
然后patches-XX是对应内核的patches，我们不需要这些东西，所以不需要。
内核位置的指定
然后直接编译make即可。
编译的错误 1. DEPEND的问题
如果使用Prebuilt的toolchain可能会出现下面这个问题：
Package libnl-tiny is missing dependencies for the following libraries:
libc.so.6
libc.so.6
那么就需要将libc.so添加到DEPENDS变量中。
2. 内核编译错误
内核比较老，但是GCC版本较高，会出现下面这个错误：
[html] view plain copy
- init/do_mounts_rd.o: In function `nop_flush_icache_all':
- do_mounts_rd.c:(.text+0x0): multiple definition of `nop_flush_icache_all'
- init/do_mounts.o:/ExtDisk/Projects/iMX6UL_OpenWRT/BSP_EVB/linux_3.14/init/do_mounts.c:610: first defined here
- init/do_mounts_rd.o: In function `nop_flush_kern_cache_all':
- do_mounts_rd.c:(.text+0x4): multiple definition of `nop_flush_kern_cache_all'
- init/do_mounts.o:/ExtDisk/Projects/iMX6UL_OpenWRT/BSP_EVB/linux_3.14/init/do_mounts.c:610: first defined here
- init/do_mounts_rd.o: In function `nop_flush_kern_cache_louis':
要解决这个问题，需要在内核的CFLAG中添加 -fgnu89-inline
这个问题可以参考：
http://unix.stackexchange.com/questions/250804/error-while-building-linux-kernel-for-versatile-board
3.内核编译的错误2
[cpp] view plain copy
- ERROR: module '/openwrt/build_dir/target-arm_cortex-a9+neon_musl-1.1.16_eabi/linux-imx6/linux-3.14/drivers/usb/gadget/udc/udc-core.ko' is missing.
出现问题是因为我们没有正确的配置kernel module对应的item，但是因为我们暂时不需要，所以直接将其干掉即可：
一般都是因为make的时候指定-jN的N过大导致。
5. 环境编译问题
编译的时候出现：
[plain] view plain copy
- Usage:
- cp [options] FILE DEST
- cp [options] FILE1 [FILE2 ...] DEST-DIR
- cp --help for options list
- cp: error: no such option: -p
- make[3]: *** [/ExtDisk/Projects/WRTNode/staticSDK/build_dir/host/patch-2.7.1/.configured] Error 2
- make[3]: Leaving directory `/ExtDisk/Projects/WRTNode/staticSDK/tools/patch'
- make[2]: *** [tools/patch/compile] Error 2
- make[2]: Leaving directory `/ExtDisk/Projects/WRTNode/staticSDK'
- make[1]: *** [/ExtDisk/Projects/WRTNode/staticSDK/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/stamp/.tools_install_yynyynynynyyyyyyyyyynyyyyyyyynyyyynnyyynnyynnnyyyy] Error 2
- make[1]: Leaving directory `/ExtDisk/Projects/WRTNode/staticSDK'
- make: *** [world] Error 2
一般是因为安装了gcp导致的，所以remove掉gcp即可。
编译的结果产物
位于bin下面：
[plain] view plain copy
- $ ls bin/imx6/ -l
- total 130528
- -rw-r--r-- 1 hexiongjun hexiongjun 617 1月 23 22:48 md5sums
- -rw-r--r-- 1 hexiongjun hexiongjun 23667550 1月 23 22:48 openwrt-imx6-generic-rootfs.tar.gz
- -rw-r--r-- 1 hexiongjun hexiongjun 10158080 1月 23 22:48 openwrt-imx6-ventana-bootfs_large.ubifs
- -rw-r--r-- 1 hexiongjun hexiongjun 8888320 1月 23 22:48 openwrt-imx6-ventana-bootfs_normal.ubifs
- -rw-r--r-- 1 hexiongjun hexiongjun 6855569 1月 23 22:48 openwrt-imx6-ventana-bootfs.tar.gz
- -rw-r--r-- 1 hexiongjun hexiongjun 35389440 1月 23 22:48 openwrt-imx6-ventana-squashfs-nand_large.ubi
- -rw-r--r-- 1 hexiongjun hexiongjun 33816576 1月 23 22:48 openwrt-imx6-ventana-squashfs-nand_normal.ubi
- -rw-r--r-- 1 hexiongjun hexiongjun 7431416 1月 23 22:48 openwrt-imx6-ventana-uImage
- -rw-r--r-- 1 hexiongjun hexiongjun 7431416 1月 23 22:48 openwrt-imx6-wandboard-uImage
- drwxr-xr-x 10 hexiongjun hexiongjun 4096 1月 22 11:31 packages
- -rw-r--r-- 1 hexiongjun hexiongjun 977 1月 23 22:48 sha256sums
这里面我们使用generic的rootfs即可。
然后我们使用zImage而不是uImage，这个位于：
build_dir/target-arm_cortex-a9+neon_musl-1.1.16_eabi/linux-imx6/zImage
dtb位于：
build_dir/target-arm_cortex-a9+neon_musl-1.1.16_eabi/linux-imx6/linux-3.14/arch/arm/boot/dts/imx6ul-14x14-evk.dtb
将zImage与dtb拷贝到tftp directory，然后将rootfs解压到SD卡，使用SD卡作为rootfs。然后就可以使用下面这些命令来启动了。
[plain] view plain copy
- set serverip 192.168.1.100
- set bootargs 'console=ttymxc0,115200 ip=192.168.1.120 root=/dev/mmcblk0p2 rootwait'
- tftp 85800000 imx6ul_openwrt/imx6ul-14x14-evk.dtb; tftp 83800000 imx6ul_openwrt/zImage;bootz 83800000 - 85800000
启动后发现buzzer不停的叫着，显然这个是因为内核dts配置有问题， 因此我们先使用默认的kernel + dtb先启动，以后再继续更改内核。启动参数为：
[plain] view plain copy
- set serverip 192.168.1.100
- set bootargs 'console=ttymxc0,115200 ip=192.168.1.120 root=/dev/mmcblk0p2 rootwait'
- run bootcmd
启动后的log如下，放在下面为以后可能有需要的做对比和参照
[plain] view plain copy
- U-Boot 2015.04-14366-g8248e7c-dirty (Mar 09 2016 - 09:57:22)
- CPU: Freescale i.MX6UL rev1.0 at 396 MHz
- CPU: Temperature 34 C
- Reset cause: POR
- Board: MX6UL 14x14 EVK
- I2C: ready
- DRAM: 512 MiB
- NAND: 256 MiB
- MMC: FSL_SDHC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: eth_init: fec_probe(bd, 0, 0) @ 02188000
- fec_phy_write
- FEC0eth_write_hwaddr###### ret = 0
- Warning: FEC0 using MAC address from net device
- Boot from NAND
- Hit any key to stop autoboot: 0
- =>
- =>
- => set serverip 192.168.1.100
- => set bootargs 'console=ttymxc0,115200 ip=192.168.1.120 root=/dev/mmcblk0p2 rootwait'
- => run bootcmd
- NAND read: device 0 offset 0x400000, size 0x1000000
- 16777216 bytes read: OK
- NAND read: device 0 offset 0x1400000, size 0x80000
- 524288 bytes read: OK
- Kernel image @ 0x83800000 [ 0x000000 - 0x5e4030 ]
- ## Flattened Device Tree blob at 85800000
- Booting using the fdt blob at 0x85800000
- Loading Device Tree to 9ef29000, end 9ef3494c ... OK
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Linux version 3.14.38-svn32 (Vic@EAC)#8 SMP PREEMPT Sun Nov 6 15:56:19 CST 2016 (gcc version 4.9.1 20140710 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC 4.9-2014.07) )
- CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Freescale i.MX6 UltraLite 14x14 EVK Board
- cma: CMA: reserved 320 MiB at 8a000000
- Memory policy: Data cache writealloc
- PERCPU: Embedded 8 pages/cpu @9fb3f000 s8320 r8192 d16256 u32768
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- Kernel command line: console=ttymxc0,115200 ip=192.168.1.120 root=/dev/mmcblk0p2 rootwait
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 179696K/524288K available (7573K kernel code, 476K rwdata, 2732K rodata, 384K init, 433K bss, 344592K reserved, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
- lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
- pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
- .text : 0x80008000 - 0x80a187ac (10306 kB)
- .init : 0x80a19000 - 0x80a79080 ( 385 kB)
- .data : 0x80a7a000 - 0x80af1000 ( 476 kB)
- .bss : 0x80af100c - 0x80b5d49c ( 434 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Preemptible hierarchical RCU implementation.
- RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- NR_IRQS:16 nr_irqs:16 16
- Switching to timer-based delay loop
- sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
- clocksource_of_init: no matching clocksources found
- Console: colour dummy device 80x30
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- /cpus/cpu@0 missing clock-frequency property
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x80735800 - 0x80735858
- Brought up 1 CPUs
- SMP: Total of 1 processors activated (6.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- pinctrl core: initialized pinctrl subsystem
- regulator-dummy: no parameters
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- Use WDOG1 as reset source
- syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
- vdd3p0: 2625 <--> 3400 mV at 3000 mV
- cpu: 725 <--> 1450 mV at 1150 mV
- vddsoc: 725 <--> 1450 mV at 1175 mV
- syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
- syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
- syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 8 bytes.
- imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
- 20dc000.gpc supply pu not found, using dummy regulator
- bio: create slab
at 0 - mxs-dma 1804000.dma-apbh: initialized
- can-3v3: 3300 mV
- VSD_3V3: 3300 mV
- gpio_dvfs: 3300 mV
- i2c-core: driver [max17135] using legacy suspend method
- i2c-core: driver [max17135] using legacy resume method
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- i2c-gpio i2c.15: using pins 134 (SDA) and 133 (SCL)
- imx-i2c 21a0000.i2c: registration failed
- imx-i2c: probe of 21a0000.i2c failed with error -16
- i2c i2c-1: IMX I2C adapter registered
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
- PTP clock support registered
- MIPI CSI2 driver module loaded
- Advanced Linux Sound Architecture Driver Initialized.
- Bluetooth: Core ver 2.18
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- cfg80211: Calling CRDA to update world regulatory domain
- Switched to clocksource mxc_timer1
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- imx rpmsg driver is registered.
- Bus freq driver module loaded
- futex hash table entries: 256 (order: 2, 16384 bytes)
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
- fuse init (API version 7.22)
- msgmni has been set to 990
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- imx-weim 21b8000.weim: Driver registered.
- backlight.8 supply power not found, using dummy regulator
- MIPI DSI driver module loaded
- mxsfb_probe############
- 21c8000.lcdif supply lcd not found, using dummy regulator
- mxsfb 21c8000.lcdif: failed to find mxc display driver
- Console: switching to colour frame buffer device 100x30
- mxsfb 21c8000.lcdif: initialized
- imx-sdma 20ec000.sdma: no event needs to be remapped
- imx-sdma 20ec000.sdma: loaded firmware 3.1
- imx-sdma 20ec000.sdma: initialized
- Serial: IMX driver
- 2018000.serial: ttymxc6 at MMIO 0x2018000 (irq = 71, base_baud = 5000000) is a IMX
- 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
- console [ttymxc0] enabled
- 2024000.serial: ttymxc7 at MMIO 0x2024000 (irq = 72, base_baud = 5000000) is a IMX
- 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
- 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
- 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
- 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 62, base_baud = 5000000) is a IMX
- 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 49, base_baud = 5000000) is a IMX
- serial: Freescale lpuart driver
- imx sema4 driver is registered.
- [drm] Initialized drm 1.1.0 20060810
- [drm] Initialized vivante 1.0.0 20120216 on minor 0
- brd: module loaded
- loop: module loaded
- at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
- nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
- nand: Micron MT29F2G08ABAEAWP
- nand: 256MiB, SLC, page size: 2048, OOB size: 64
- gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5
- Bad block table found at page 131008, version 0x01
- Bad block table found at page 130944, version 0x01
- 4 ofpart partitions found on MTD device gpmi-nand
- Creating 4 MTD partitions on "gpmi-nand":
- 0x000000000000-0x000000400000 : "UBoot"
- 0x000000400000-0x000001400000 : "kernel"
- 0x000001400000-0x000001480000 : "dtb"
- 0x000001480000-0x000010000000 : "rootfs"
- gpmi-nand 1806000.gpmi-nand: driver registered.
- spi_gpio spi4.14: gpio-miso property not found, switching to no-rx mode
- spi_imx 2008000.ecspi: probed
- CAN device driver interface
- flexcan 2090000.can: device registered (reg_base=a09c0000, irq=142)
- flexcan 2094000.can: device registered (reg_base=a09c8000, irq=143)
- 2188000.ethernet supply phy not found, using dummy regulator
- pps pps0: new PPS source ptp0
- libphy: fec_enet_mii_bus: probed
- fec 2188000.ethernet eth0: registered PHC device 0
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-mxc: Freescale On-Chip EHCI Host driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- usbcore: registered new interface driver usb-storage
- usbcore: registered new interface driver usb_ehset_test
- 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
- 2184000.usb supply vbus not found, using dummy regulator
- 2184200.usb supply vbus not found, using dummy regulator
- ci_hdrc ci_hdrc.1: EHCI Host Controller
- ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- mousedev: PS/2 mouse device common for all mice
- input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
- snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
- spi0.0 supply vcc not found, using dummy regulator
- ads7846 spi0.0: touchscreen, irq 247
- input: ADS7846 Touchscreen as /devices/soc0/soc.0/2000000.aips-bus/2000000.spba-bus/2008000.ecspi/spi_master/spi0/spi0.0/input/input1
- pwm_test_probe#################
- i2c-core: driver [isl29023] using legacy suspend method
- i2c-core: driver [isl29023] using legacy resume method
- rtc-rx8010 0-0032: Update timer was detected
- rtc-rx8010 0-0032: rtc core: registered rx8010 as rtc0
- rtc-rx8010 0-0032: rx8010-irq_1 missing or invalid
- rtc-rx8010 0-0032: rx8010-irq_2 missing or invalid
- i2c /dev entries driver
- IR NEC protocol handler initialized
- IR RC5(x) protocol handler initialized
- IR RC6 protocol handler initialized
- IR JVC protocol handler initialized
- IR Sony protocol handler initialized
- IR RC5 (streamzap) protocol handler initialized
- IR SANYO protocol handler initialized
- IR MCE Keyboard/mouse protocol handler initialized
- pxp-v4l2 pxp_v4l2.10: initialized
- i2c-core: driver [mag3110] using legacy suspend method
- i2c-core: driver [mag3110] using legacy resume method
- imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
- Bluetooth: HCI UART driver ver 2.2
- Bluetooth: HCI H4 protocol initialized
- Bluetooth: HCI BCSP protocol initialized
- Bluetooth: HCIATH3K protocol initialized
- usbcore: registered new interface driver bcm203x
- usbcore: registered new interface driver btusb
- usbcore: registered new interface driver ath3k
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- mmc0: no vqmmc regulator found
- mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
- caam 2140000.caam: Instantiated RNG4 SH0
- usb 1-1: new high-speed USB device number 2 using ci_hdrc
- caam 2140000.caam: Instantiated RNG4 SH1
- caam 2140000.caam: device ID = 0x0a160300 (Era 8)
- caam 2140000.caam: job rings = 3, qi = 0
- mmc0: host does not support reading read-only switch. assuming write-enable.
- mmc0: new high speed SDHC card at address aaaa
- mmcblk0: mmc0:aaaa SU08G 7.40 GiB
- mmcblk0: p1 p2
- caam algorithms registered in /proc/crypto
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- caam_jr 2141000.jr0: registering rng-caam
- platform caam_sm: blkkey_ex: 8 keystore units available
- platform caam_sm: 64-bit clear key:
- platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
- platform caam_sm: 64-bit black key:
- platform caam_sm: [0000] 8f 47 2b 1a 30 aa b1 16
- platform caam_sm: [0008] 34 60 a7 58 22 3d 43 73
- platform caam_sm: 128-bit clear key:
- platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
- platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
- platform caam_sm: 128-bit black key:
- platform caam_sm: [0000] c8 ff b6 f8 86 c0 56 45
- platform caam_sm: [0008] 34 29 77 85 a6 9a 95 c1
- platform caam_sm: 192-bit clear key:
- platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
- platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
- platform caam_sm: [0016] 10 11 12 13 14 15 16 17
- platform caam_sm: 192-bit black key:
- platform caam_sm: [0000] 6e a6 30 da 4c ce 6b 1b
- platform caam_sm: [0008] ca 24 b6 a6 7e bb ac 2f
- platform caam_sm: [0016] 13 9d d7 9a 30 05 74 50
- platform caam_sm: [0024] ce 3e 6e 97 b5 0c e0 d8
- platform caam_sm: 256-bit clear key:
- platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
- platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
- platform caam_sm: [0016] 10 11 12 13 14 15 16 17
- platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f
- platform caam_sm: 256-bit black key:
- platform caam_sm: [0000] 22 8e 30 93 45 fa 7d 18
- platform caam_sm: [0008] 1e 81 c4 a2 4a 22 61 61
- platform caam_sm: [0016] 1f 8e a0 f2 ec 3b 04 81
- platform caam_sm: [0024] 1a 5a ba e0 c4 9e 21 e2
- platform caam_sm: 64-bit unwritten blob:
- platform caam_sm: [0000] 00 00 00 00 00 00 00 00
- platform caam_sm: [0008] 00 00 00 00 00 00 00 00
- platform caam_sm: [0016] 00 00 00 00 00 00 00 00
- platform caam_sm: [0024] 00 00 00 00 00 00 00 00
- platform caam_sm: [0032] 00 00 00 00 00 00 00 00
- platform caam_sm: [0040] 00 00 00 00 00 00 00 00
- platform caam_sm: [0048] 00 00 00 00 00 00 00 00
- platform caam_sm: [0056] 00 00 00 00 00 00 00 00
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 128-bit unwritten blob:
- platform caam_sm: [0000] 00 00 00 00 00 00 00 00
- platform caam_sm: [0008] 00 00 00 00 00 00 00 00
- platform caam_sm: [0016] 00 00 00 00 00 00 00 00
- platform caam_sm: [0024] 00 00 00 00 00 00 00 00
- platform caam_sm: [0032] 00 00 00 00 00 00 00 00
- platform caam_sm: [0040] 00 00 00 00 00 00 00 00
- platform caam_sm: [0048] 00 00 00 00 00 00 00 00
- platform caam_sm: [0056] 00 00 00 00 00 00 00 00
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 196-bit unwritten blob:
- platform caam_sm: [0000] 00 00 00 00 00 00 00 00
- platform caam_sm: [0008] 00 00 00 00 00 00 00 00
- platform caam_sm: [0016] 00 00 00 00 00 00 00 00
- platform caam_sm: [0024] 00 00 00 00 00 00 00 00
- platform caam_sm: [0032] 00 00 00 00 00 00 00 00
- platform caam_sm: [0040] 00 00 00 00 00 00 00 00
- platform caam_sm: [0048] 00 00 00 00 00 00 00 00
- platform caam_sm: [0056] 00 00 00 00 00 00 00 00
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 256-bit unwritten blob:
- platform caam_sm: [0000] 00 00 00 00 00 00 00 00
- platform caam_sm: [0008] 00 00 00 00 00 00 00 00
- platform caam_sm: [0016] 00 00 00 00 00 00 00 00
- platform caam_sm: [0024] 00 00 00 00 00 00 00 00
- platform caam_sm: [0032] 00 00 00 00 00 00 00 00
- platform caam_sm: [0040] 00 00 00 00 00 00 00 00
- platform caam_sm: [0048] 00 00 00 00 00 00 00 00
- platform caam_sm: [0056] 00 00 00 00 00 00 00 00
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 64-bit black key in blob:
- platform caam_sm: [0000] 47 4c 9f 05 19 00 bf 89
- platform caam_sm: [0008] 22 7e e9 f6 6e 58 6a 8c
- platform caam_sm: [0016] 7e 41 54 a1 d0 85 fd 37
- platform caam_sm: [0024] 32 6d 90 cb 45 3a f8 40
- platform caam_sm: [0032] d8 2a 88 6d 71 5d 0f 88
- platform caam_sm: [0040] fb 57 7f 60 72 bf c7 95
- platform caam_sm: [0048] a4 af 5e 7a a0 16 e2 3f
- platform caam_sm: [0056] 00 00 00 00 00 00 00 00
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 128-bit black key in blob:
- platform caam_sm: [0000] 79 cf f2 02 b6 fc cc d5
- platform caam_sm: [0008] f0 f0 36 7b 7a 75 5a cf
- platform caam_sm: [0016] 8e f5 24 fa 01 22 2c 91
- platform caam_sm: [0024] e6 bf 92 3c 9c c9 22 91
- platform caam_sm: [0032] 80 78 39 0e c1 39 f6 32
- platform caam_sm: [0040] 94 9e 2a 35 0f 2c 43 01
- platform caam_sm: [0048] bc 51 eb 1b db 96 e7 3b
- platform caam_sm: [0056] 6f e4 b4 e3 34 7a c2 85
- platform caam_sm: [0064] 00 00 00 00 00 00 00 00
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 192-bit black key in blob:
- platform caam_sm: [0000] 61 62 cc c3 ac e7 e7 07
- platform caam_sm: [0008] 3c 44 0c c3 5a 46 5d 78
- platform caam_sm: [0016] 36 15 6e 7a 87 fe 37 a9
- platform caam_sm: [0024] 52 47 29 81 0b 44 8f 61
- platform caam_sm: [0032] db 2b 9a 10 89 e1 a0 a3
- platform caam_sm: [0040] 5a 34 71 d8 4f a9 3a cf
- platform caam_sm: [0048] d3 37 be b9 b8 4b 0c 4d
- platform caam_sm: [0056] 2f 2f 00 e1 0f 7b 72 06
- platform caam_sm: [0064] 55 75 26 b6 d4 e8 0c 2e
- platform caam_sm: [0072] 00 00 00 00 00 00 00 00
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: 256-bit black key in blob:
- platform caam_sm: [0000] 50 38 e5 63 34 57 02 f2
- platform caam_sm: [0008] 03 ad dc 1e e1 f6 c4 14
- platform caam_sm: [0016] 40 47 ab 99 12 ff 3b 5f
- platform caam_sm: [0024] c0 16 7a 2a 40 dc 9e 70
- platform caam_sm: [0032] 13 f1 8c 7e 0f b9 b3 27
- platform caam_sm: [0040] e9 89 cd 24 40 f5 4c 52
- platform caam_sm: [0048] 7c b2 c3 98 e9 7d 91 a5
- platform caam_sm: [0056] 13 1a 56 21 32 c6 51 c5
- platform caam_sm: [0064] 5e c6 00 47 89 da 1a 40
- platform caam_sm: [0072] 9f 71 75 3a 78 e1 e4 f8
- platform caam_sm: [0080] 00 00 00 00 00 00 00 00
- platform caam_sm: [0088] 00 00 00 00 00 00 00 00
- platform caam_sm: restored 64-bit black key:
- platform caam_sm: [0000] a0 e7 0c 01 19 44 ff 89
- platform caam_sm: [0008] 91 b2 43 78 09 38 eb ce
- platform caam_sm: restored 128-bit black key:
- platform caam_sm: [0000] c8 ff b6 f8 86 c0 56 45
- platform caam_sm: [0008] 34 29 77 85 a6 9a 95 c1
- platform caam_sm: restored 192-bit black key:
- platform caam_sm: [0000] 6e a6 30 da 4c ce 6b 1b
- platform caam_sm: [0008] ca 24 b6 a6 7e bb ac 2f
- platform caam_sm: [0016] 5a 2c 97 fe 12 7a 0c 5f
- platform caam_sm: [0024] 05 68 b4 53 6e e6 ee 40
- platform caam_sm: restored 256-bit black key:
- platform caam_sm: [0000] 22 8e 30 93 45 fa 7d 18
- platform caam_sm: [0008] 1e 81 c4 a2 4a 22 61 61
- platform caam_sm: [0016] 1f 8e a0 f2 ec 3b 04 81
- platform caam_sm: [0024] 1a 5a ba e0 c4 9e 21 e2
- snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- fsl-asrc 2034000.asrc: driver registered
- snd-soc-dummy snd-soc-dummy: ASoC: Failed to create platform debugfs directory
- imx-wm8960 sound.13: wm8960-hifi <-> 202c000.sai mapping ok
- imx-wm8960 sound.13: snd-soc-dummy-dai <-> 2034000.asrc mapping ok
- imx-wm8960 sound.13: wm8960-hifi <-> 202c000.sai mapping ok
- NET: Registered protocol family 26
- TCP: cubic registered
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- can: controller area network core (rev 20120528 abi 9)
- NET: Registered protocol family 29
- can: raw protocol (rev 20120528)
- can: broadcast manager protocol (rev 20120528 t)
- can: netlink gateway (rev 20130117) max_hops=1
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: BNEP socket layer initialized
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- Bluetooth: HIDP socket layer initialized
- 8021q: 802.1Q VLAN Support v1.8
- Key type dns_resolver registered
- cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
- gpio_dvfs: disabling
- can-3v3: disabling
- regulator-dummy: disabling
- imx mcc test is registered.
- rtc-rx8010 0-0032: setting system clock to 1970-01-01 01:01:29 UTC (3689)
- fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- libphy: 2188000.ethernet:00 - Link is Up - 100/Full
- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- IP-Config: Guessing netmask 255.255.255.0
- IP-Config: Complete:
- device=eth0, hwaddr=30:30:3a:30:34:3a, ipaddr=192.168.1.120, mask=255.255.255.0, gw=255.255.255.255
- host=192.168.1.120, domain=, nis-domain=(none)
- bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
- ALSA device list:
- #0: wm8960-audio
- EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
- EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- EXT4-fs (mmcblk0p2): recovery complete
- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- devtmpfs: mounted
- Freeing unused kernel memory: 384K (80a19000 - 80a79000)
- init: Console is alive
- init: - watchdog -
- init: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- mount_root: mounting /dev/root
- EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- procd: - early -
- procd: - watchdog -
- random: jshn urandom read with 63 bits of entropy available
- Failed to connect to ubus
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- random: nonblocking pool is initialized
- BusyBox v1.24.2 () built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- DESIGNATED DRIVER (Bleeding Edge, 50082)
- -----------------------------------------------------
- * 2 oz. Orange Juice Combine all juices in a
- * 2 oz. Pineapple Juice tall glass filled with
- * 2 oz. Grapefruit Juice ice, stir well.
- * 2 oz. Cranberry Juice
- -----------------------------------------------------
- root@192:/# EXT4-fs (mmcblk0p1): recovery complete
- EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)