实验目的：测试纯IPv6下的EIGRP配置
实验环境：思科pt5.3中的2811路由器
实验拓扑：
实验配置详细步骤：
配置router2
Router>enable
Router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname r1
r1(config)#ipv6 router eigrp 100
r1(config-rtr)#router-id 10.10.10.1
r1(config-rtr)#no shutdown //一定要启用，否则使用show ipv6 eigtp neigbor时会提示eigrp notrunning。
r1(config-rtr)#int fa0/0
r1(config-if)#ipv6 address 2001:1111::1/64
r1(config-if)#ipv6 eigrp 100
r1(config-if)#no shutdown
r1(config)#int fa0/1
r1(config-if)#ipv6 address 2010:2222::1/64
r1(config-if)#ipv6 eigrp 100
r1(config-if)#no shutdown
配置router3
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ipv6 router eigrp 100
Router(config-rtr)#router-id 10.10.10.1
Router(config-rtr)#no shutdown
Router(config-rtr)#int fa0/0
Router(config-if)#no ip address
Router(config-if)#ipv6 address 2010:1111::2/64
Router(config-if)#ipv6 eigrp 100
Router(config-if)#no shutdown
Router(config)#int fa0/1
Router(config-if)#no ip address
Router(config-if)#ipv6 address 2010:3333::1/64
Router(config-if)#ipv6 eigrp 100
Router(config-if)#no shutdown
实验检查部分
检查路由表
Router#show ipv6 route
IPv6 Routing Table - 7 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route, M - MIPv6
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
D - EIGRP, EX - EIGRP external
D 2001:1111::/64 [90/30720]
via FE80::201:C7FF:FE13:B601, FastEthernet0/0
C 2010:1111::/64 [0/0]
via ::, FastEthernet0/0
L 2010:1111::2/128 [0/0]
via ::, FastEthernet0/0
D 2010:2222::/64 [90/30720]
via FE80::201:C7FF:FE13:B601, FastEthernet0/0
C 2010:3333::/64 [0/0]
via ::, FastEthernet0/1
L 2010:3333::1/128 [0/0]
via ::, FastEthernet0/1
L FF00::/8 [0/0]
via ::, Null0
EIGRP的邻居状态
Router#show ipv6 eigrp neighbors
IPv6-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 FE80::201:C7FF:FE13:B601Fa0/0 10 00:03:55 40 1000 0 5
EIGRP的拓扑
Router#show ipv6 eigrp topology all-links
IPv6-EIGRP Topology Table for AS 100/ID(10.10.10.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status
P 2010:1111::/64, 1 successors, FD is 28160
via Connected, FastEthernet0/0
P 2010:2222::/64, 1 successors, FD is 30720
via FE80::201:C7FF:FE13:B601 (30720/28160), FastEthernet0/0
P 2001:1111::/64, 1 successors, FD is 30720
via FE80::201:C7FF:FE13:B601 (30720/28160), FastEthernet0/0
P 2010:3333::/64, 1 successors, FD is 28160
via Connected, FastEthernet0/1