利用FormatMessage函数获取错误描述

#include
#include
#include 
using namespace std;

BOOL getErrorDescription(DWORD dwMessageId, HLOCAL &hlocal);

int main(){
	DWORD dwMessageId;
	
	while (printf("Please Input MessageId:"), cin >> dwMessageId){
		HLOCAL hlocal = NULL;
		if (getErrorDescription(dwMessageId, hlocal)){
			printf("%s\n", (LPSTR)LocalLock(hlocal));
			LocalFree(hlocal);
		}
		else{
			cout << "ErrorDescription Not Found!" << endl;
		}
	}
}

BOOL getErrorDescription(DWORD dwMessageId, HLOCAL &hlocal){

	DWORD langid = MAKELANGID(LANG_NEUTRAL, SUBLANG_NEUTRAL);

	BOOL fOK = FormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER| FORMAT_MESSAGE_IGNORE_INSERTS| FORMAT_MESSAGE_FROM_SYSTEM
		, NULL, dwMessageId, langid, (LPSTR)&hlocal, 0, NULL);

	if (!fOK){
		HMODULE hMod = LoadLibrary(TEXT("netmesg.dll"));
		if (hMod){
			fOK = FormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_IGNORE_INSERTS | FORMAT_MESSAGE_FROM_HMODULE
				, hMod, dwMessageId, langid, (LPSTR)&hlocal, 0, NULL);
			FreeLibrary(hMod);
		}
	}

	return fOK && hlocal != NULL;
}


DWORD FormatMessage(
  DWORD dwFlags, 
  LPCVOID lpSource, 
  DWORD dwMessageId, 
  DWORD dwLanguageId, 
  LPTSTR lpBuffer, 
  DWORD nSize, 
  va_list* Arguments
);

Parameters

dwFlags

[in] Specifies aspects of the formatting process and how to interpret the lpSource parameter. The low-order byte of dwFlags specifies how the function handles line breaks in the output buffer. The low-order byte can also specify the maximum width of a formatted output line.

This parameter can be a combination of the following bit flags.

Value

Description

FORMAT_MESSAGE_ALLOCATE_BUFFER

Specifies that the lpBuffer parameter is a pointer to a PVOID pointer, and that the nSize parameter specifies the minimum number of bytes (ANSI version) or characters (Unicode version) to allocate for an output message buffer. The function allocates a buffer large enough to hold the formatted message, and places a pointer to the allocated buffer at the address specified by lpBuffer. The caller should use the LocalFree function to free the buffer when it is no longer needed.

FORMAT_MESSAGE_IGNORE_INSERTS

Specifies that insert sequences in the message definition are to be ignored and passed through to the output buffer unchanged. This flag is useful for fetching a message for later formatting. If this flag is set, the Arguments parameter is ignored.

FORMAT_MESSAGE_FROM_STRING

Specifies that lpSource is a pointer to a null-terminated message definition. The message definition may contain insert sequences, just as the message text in a message table resource may. Cannot be used with FORMAT_MESSAGE_FROM_HMODULE or FORMAT_MESSAGE_FROM_SYSTEM.

FORMAT_MESSAGE_FROM_HMODULE

Specifies that lpSource is a module handle containing the message-table resources to search. If this lpSource handle is NULL, the current process's application image file will be searched. Cannot be used with FORMAT_MESSAGE_FROM_STRING.

FORMAT_MESSAGE_FROM_SYSTEM

Specifies that the function should search the system message-table resources for the requested message. If this flag is specified with FORMAT_MESSAGE_FROM_HMODULE, the function searches the system message table if the message is not found in the module specified by lpSource. Cannot be used with FORMAT_MESSAGE_FROM_STRING.

If this flag is specified, an application can pass the result of the GetLastError function to retrieve the message text for a system-defined error.

Not all Windows Embedded Compact-based devices will contain the system message-table resources. This is a selectable part of the Windows Embedded Compact operating system and is often removed to conserve space.

FORMAT_MESSAGE_ARGUMENT_ARRAY

Specifies that the Arguments parameter is not a va_list structure, but instead is just a pointer to an array of 32-bit values that represent the arguments.

The low-order byte of dwFlags can specify the maximum width of a formatted output line. Use the FORMAT_MESSAGE_MAX_WIDTH_MASK constant and bitwise Boolean operations to set and retrieve this maximum width value.

The following list shows how FormatMessage interprets the value of the low-order byte.

Value

Description

0

There are no output line width restrictions. The function stores line breaks that are in the message definition text into the output buffer.

A nonzero value other than FORMAT_MESSAGE_MAX_WIDTH_MASK

The nonzero value is the maximum number of characters in an output line. The function ignores regular line breaks in the message definition text. The function never splits a string delimited by white space across a line break. The function stores hard-coded line breaks in the message definition text into the output buffer. Hard-coded line breaks are coded with the %n escape sequence.

FORMAT_MESSAGE_MAX_WIDTH_MASK

The function ignores regular line breaks in the message definition text. The function stores hard-coded line breaks in the message definition text into the output buffer. The function generates no new line breaks.

lpSource

[in] Pointer to the location of the message definition. The type of this parameter depends on the settings in the dwFlags parameter.

Value

Description

FORMAT_MESSAGE_FROM_HMODULE

The lpSource parameter is an hModule of the module that contains the message table to search.

FORMAT_MESSAGE_FROM_STRING

The lpSource parameter is an LPTSTR that points to unformatted message text. It will be scanned for inserts and formatted accordingly.

If neither of these flags is set in dwFlags, then lpSource is ignored.

dwMessageId

[in] Specifies the 32-bit message identifier for the requested message. This parameter is ignored if dwFlags includes FORMAT_MESSAGE_FROM_STRING.

dwLanguageId

[in] Not supported.

lpBuffer

[out] Pointer to a buffer for the formatted (and null-terminated) message. If dwFlags includes FORMAT_MESSAGE_ALLOCATE_BUFFER, the function allocates a buffer using the LocalAlloc function, and places the pointer to the buffer at the address specified in lpBuffer.

nSize

[in] If the FORMAT_MESSAGE_ALLOCATE_BUFFER flag is not set, this parameter specifies the maximum number of characters that can be stored in the output buffer. If FORMAT_MESSAGE_ALLOCATE_BUFFER is set, this parameter specifies the minimum number of bytes or characters to allocate for an output buffer.

Arguments

[in] Pointer to an array of 32-bit values that are used as insert values in the formatted message. A %1 in the format string indicates the first value in the Arguments array; a %2 indicates the second argument; and so on.

The interpretation of each 32-bit value depends on the formatting information associated with the insert in the message definition. The default is to treat each value as a pointer to a null-terminated string.

By default, the Arguments parameter is of type va_list*, which is a language- and implementation-specific data type for describing a variable number of arguments. If you do not have a pointer of type va_list*, then specify the FORMAT_MESSAGE_ARGUMENT_ARRAY flag and pass a pointer to an array of 32-bit values; those values are input to the message formatted as the insert values. Each insert must have a corresponding element in the array.

Return Value

The number of characters stored in the output buffer, excluding the terminating null character, indicates success. Zero indicates failure. To get extended error information, call GetLastError.


你可能感兴趣的:(c/c++)