笔记：CentOS7下部署一个mysql5.6和一个springboot项目的Docker容器
笔记：CentOS7下启动一个mysql5.6的Docker容器
虚拟机centOS7
安装docker省略
下载mysql5.6镜像，启动镜像
[root@localhost ~]# docker pull mysql:5.6
[root@localhost ~]# docker run --name mysql5.6v2 -p 3306:3306 \
-e MYSQL_ROOT_PASSWORD=root -d mysql:5.6
9fbb4ef87bfe33b7634ae3e76fa24689d772d1b00e364ca50c74005bc5f1a383
[root@localhost ~]# docker exec -it mysql5.6v2 bash
root@9fbb4ef87bfe:/# mysql
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
root@9fbb4ef87bfe:/# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.6.43 MySQL Community Server (GPL)
Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY 'P@ssw0rd';
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'IDENTIFIED BY 'P@ssw0rd'' at line 1
mysql> show databases
-> ;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
+--------------------+
3 rows in set (0.01 sec)
mysql> use mysql;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select user,host from user
-> ;
+------+-----------+
| user | host |
+------+-----------+
| root | % |
| root | localhost |
+------+-----------+
2 rows in set (0.00 sec)
mysql> create user 'yuanchengUser'@'%' identified by '******'
-> ;
Query OK, 0 rows affected (0.03 sec)
mysql> select user,host from user
-> ;
+---------------+-----------+
| user | host |
+---------------+-----------+
| root | % |
| yuanchengUser | % |
| root | localhost |
+---------------+-----------+
3 rows in set (0.00 sec)
mysql> set password for 'yuanchengUser'@'%'=password('******')
-> ;
Query OK, 0 rows affected (0.00 sec)
mysql> exit ;
Bye
[root@localhost ~]# ifconfig
docker0: flags=4163 mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
inet6 fe80::42:8aff:fe39:e571 prefixlen 64 scopeid 0x20
ether 02:42:8a:39:e5:71 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 14 bytes 1766 (1.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens33: flags=4163 mtu 1500
inet 192.168.30.128 netmask 255.255.255.0 broadcast 192.168.30.255
inet6 fe80::565c:17ea:b4e8:ce87 prefixlen 64 scopeid 0x20
ether 00:0c:29:f1:bd:0d txqueuelen 1000 (Ethernet)
RX packets 71501 bytes 105348724 (100.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5806 bytes 403856 (394.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73 mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 68 bytes 5916 (5.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 68 bytes 5916 (5.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vethbaf1027: flags=4163 mtu 1500
inet6 fe80::60b9:a2ff:fec9:6637 prefixlen 64 scopeid 0x20
ether 62:b9:a2:c9:66:37 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 656 (656.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099 mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:a2:f4:97 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
虚拟机的IP地址为 192.168.30.128 docker配置的是 -p 3306:3306 所以映射的是虚拟机的ip
用主机ping一下试试
PS C:\WINDOWS\system32> ping 192.168.30.128
正在 Ping 192.168.30.128 具有 32 字节的数据:
来自 192.168.182.140 的回复: 无法访问目标主机。
来自 192.168.30.128 的回复: 字节=32 时间<1ms TTL=64
来自 192.168.30.128 的回复: 字节=32 时间<1ms TTL=64
来自 192.168.30.128 的回复: 字节=32 时间<1ms TTL=64
192.168.30.128 的 Ping 统计信息:
数据包: 已发送 = 4，已接收 = 4，丢失 = 0 (0% 丢失)，
往返行程的估计时间(以毫秒为单位):
最短 = 0ms，最长 = 0ms，平均 = 0ms
如果ping不通可以添加一下路由
PS C:\WINDOWS\system32> route add 192.168.30.0 mask 255.255.255.0 192.168.182.140
操作完成!
然后就通啦
这时候打开主机的navicat连接
可能会出现连不上的问题，可能是虚拟机防火墙的问题
[root@localhost ~]# firewall-cmd --list-ports
[root@localhost ~]#
[root@localhost ~]# firewall-cmd --zone=public --add-port=3306/tcp --permanent
Warning: ALREADY_ENABLED: 3306:tcp
success
[root@localhost ~]# firewall-cmd --list-ports
[root@localhost ~]# netstat -tln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:6000 0.0.0.0:* LISTEN
tcp 0 0 192.168.122.1:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp6 0 0 :::3306 :::* LISTEN
tcp6 0 0 :::111 :::* LISTEN
tcp6 0 0 :::6000 :::* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
tcp6 0 0 ::1:25 :::* LISTEN
[root@localhost ~]# sudo firewall-cmd --add-port=3306/tcp
success
[root@localhost ~]# sudo systemctl stop firewalld
关掉防火墙，欧克连上了
spring boot项目部署
将项目打成jar包，命令
mvn clean package
构建一个Dockerfile
FROM java:8
VOLUME /tmp
ADD asset-api1-0.3.0.jar app.jar
RUN bash -c "touch /app.jar"
EXPOSE 1213
ENTRYPOINT ["java","-Djava.security.egd=file:/dev/./urandom","-jar","/app.jar"]
把Dockerfile和打好的jar包放在当前目录下
docker build -t 镜像名 .
镜像构造完成后，启动容器
docker run -it -p 6666:1213--name 容器名 镜像名 bash
其中-p表示端口映射 6666代表容器暴露在外面的端口 1213是容器里程序跑在了哪个端口
意思就是通过 主机ip:6666 就可以访问到 docker容器里的1213端口
大功告成！