ubuntu18.04+python3.6安装与编译Dlib人脸库

1.下载Ubuntu (or Linux)系统支持库=>Install OS libraries

sudo apt-get install build-essential cmake pkg-config libx11-dev libatlas-base-dev libgtk-3-dev libboost-python-dev

2.安装与Python版本一致的相关库=>Install Python libraries 

sudo apt-get install python3.6-dev python3-pip     此处是3.6版本的python

 3.Step3：编译并安装Dlib=>Compile Dlib

https://link.zhihu.com/?target=http%3A//dlib.net/files/      本人安装的版

 

 

版本：dlib-19.16.tar.bz2

 3.1C++编译（Compile C++ binary）

tar xvf dlib-19.16.tar.bz2    解压文件
cd dlib-19.16/
mkdir build
cd build
cmake ..
cmake --build . --config Release
sudo make install
sudo ldconfig
cd..

3.2Python编译（Compile Python module）

方法一：

pip install dlib==19.16

 方法二：

# move to dlib's root directory
cd dlib-19.16
sudo python setup.py install



# clean up(this step is required if you want to build dlib for both Python2 and Python3)
rm -rf dist
rm -rf tool/python/build
rm python_examples/dlib.so