ubuntu 12.04配置 Bugzilla 4.4.4

安装ubuntu 12.04

sudo apt-get install  libapache2-mod-perl2

apt-get install libperl-dev   qudiao 2     sudo!!!

 apt-get install mysql-server 安装过程中需要输入密码（记住本密码）

mysql -u root -p

CREATE DATABASE bugzilla;

    GRANT ALL ONbugzilla.* TO 'bugzilla'@'localhost' IDENTIFIED BY '123456';

    flush privileges;

apt-get installapache2

官网下载bugzilla，解压后ln -s软连接到/var/www

Cd bugzilla文件夹 ，/usr/bin/perl  install-module.pl –all

./checksetup.pl生成./localconfig

       $webservergroup =‘’;此处必须为空

            db_name = 'bugzilla';数据库名字

            db_user = 'root';用户名

            db_pass = '123456';数据库密码

再次执行./checksetup.pl，此时系统会提示让输入mail、name、密码

vim /etc/apache2/apache2.conf
在内部添加这样一段：红色部分非常重要 ！！！！！

LoadModule cgi_module /usr/lib/apache2/modules/mod_cgi.so
AddHandler cgi-script .cgi .pl .py .sh       

var/www/bugzilla>
AddHandlercgi-script .cgi
Options +Indexes +ExecCGI
DirectoryIndexindex.cgi
AllowOverrideLimit

然后重启apache2
/etc/init.d/apache2 restart

到这里，所有的配置完毕，可以访问bugzilla了，URL：http://localhost/bugzilla

apache config:

# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#    /etc/apache2/
#    |-- apache2.conf
#    |    `--  ports.conf
#    |-- mods-enabled
#    |    |-- *.load
#    |    `-- *.conf
#    |-- conf-enabled
#    |    `-- *.conf
#     `-- sites-enabled
#         `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at );
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"
servername localhost:80

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5




# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.

LoadModule cgi_module /usr/lib/apache2/modules/mod_cgi.so
AddHandler cgi-script .cgi .pl .py .sh

    Options FollowSymLinks
    AllowOverride None
    Require all denied



    AllowOverride None
    Require all granted



    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted


#
#    Options Indexes FollowSymLinks
#    AllowOverride None
#    Require all granted
#
#AddHandler cgi-script .cgi
#Options +ExecCGI
Alias /bugzilla/ "/var/www/html/bugzilla/"

AddHandler cgi-script .cgi
Options +ExecCGI
DirectoryIndex index.cgi index.html
AllowOverride Limit FileInfo Indexes Options

#  
#    Options Indexes FollowSymLinks ExecCGI  
#    AllowOverride Limit  
#    DirectoryIndex index.cgi index.html  
#    Order allow,deny  
#    Allow from all  
#  
#PerlSwitches -w -T
#PerlConfigRequire /home/mk/bugzilla/mod_perl.pl

# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

    Require all denied



#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet