PAT（甲级）2020年秋季考试 7-4 Professional Ability Test

7-4 Professional Ability Test (30分)

Professional Ability Test (PAT) consists of several series of subject tests. Each test is divided into several levels. Level A is a prerequisite (前置要求) of Level B if one must pass Level A with a score no less than S in order to be qualified to take Level B. At the mean time, one who passes Level A with a score no less than S will receive a voucher（代金券）of D yuans (Chinese dollar) for taking Level B.

At the moment, this PAT is only in design and hence people would make up different plans. A plan is NOT consistent if there exists some test T so that T is a prerequisite of itself. Your job is to test each plan and tell if it is a consistent one, and at the mean time, find the easiest way (with minimum total S) to obtain the certificate of any subject test. If the easiest way is not unique, find the one that one can win the maximum total value of vouchers.

Input Specification:

Each input file contains one test case. For each case, the first line gives two positive integers N (≤1000) and M, being the total numbers of tests and prerequisite relations, respectively. Then M lines follow, each describes a prerequisite relation in the following format:

T1 T2 S D

where T1 and T2 are the indices (from 0 to N−1) of the two distinct tests; S is the minimum score (in the range (0, 100]) required to pass T1 in order to be qualified to take T2; and D is the value of the voucher (in the range (0, 500]) one can receive if one passes T1 with a score no less than S and plan to take T2. It is guaranteed that at most one pair of S and D are defined for a prerequisite relation.

Then another positive integer K (≤N) is given, followed by K queries of tests. All the numbers in a line are separated by spaces.

Output Specification:

Print in the first line Okay. if the whole plan is consistent, or Impossible. if not.

If the plan is consistent, for each query of test T, print in a line the easiest way to obtain the certificate of this test, in the format:

T0->T1->...->T

However, if T is the first level of some subject test (with no prerequisite), print You may take test T directly. instead.

If the plan is impossible, for each query of test T, check if one can take it directly or not. If the answer is yes, print in a line You may take test T directly.; or print Error. instead.

Sample Input 1:

8 15
0 1 50 50
1 2 20 20
3 4 90 90
3 7 90 80
4 5 20 20
7 5 10 10
5 6 10 10
0 4 80 60
3 1 50 45
1 4 30 20
1 5 50 20
2 4 10 10
7 2 10 30
2 5 30 20
2 6 40 60
8
0 1 2 3 4 5 6 7

Sample Output 1:

Okay.
You may take test 0 directly.
0->1
0->1->2
You may take test 3 directly.
0->1->2->4
0->1->2->4->5
0->1->2->6
3->7

Sample Input 2:

Sample Output 2:

Impossible.
You may take test 3 directly.
Error.

题目限制：

题目大意：

有N个考试，M个考试的相互之间的关系，现在我们把这N场考试和M条关系称之为一个考试计划，请问当前的计划是否是一个consistent的计划，并给出了K场考试的查询，如果是一个consistent的计划，要求给出通过当前考试最为快速的方法，如果有多种，选择获得代金券最多的那种。如果不是一个consistent的计划，那么判断当前考试T是否可以直接考取，如果是就输出You may take test T directly.否则输出Error.。

算法思路：

首先得理解题意，plan是指每一个测试用例，而不是每一个查询，consistent的判断方法就是判断当前图中是否有环，由于是有向图，可以使用拓扑排序来进行判断.
对于含有环的图，需要知道当前查询的结点是否入度为0，因此使用zeroDegree集合保存每一个入度为0的结点(inDegree在拓扑排序的时候会发生变化)，对于入度为0的点直接输出You may take test T directly.就好，否则输出Error.
对于不含有环的图，我们需要找到一条到查询结点的最短路径，这里使用迪杰斯特拉算法解决，但是没有给定起点，仔细读题发现起点一定是那些读入为0的结点，因为只有入度为0的点才能没有任何前置条件进行考试，但是如果对每一个入度为0的起点进行遍历获得最短路径的话，最后两个测试点会运行超时，所以这里采用一个小技巧，我们认为设立一个顶点，其入度为0，并且将该顶点指向当前图中的所有入度为0的顶点，并且边权设置为0，这样整个图中入度为0的顶点就恰好只有一个了，每一个顶点的最短路径的获取只需要执行一遍迪杰斯特拉算法即可。

这里简要说明下为什么该方法可行，因为从该点出发，一定先经原图中入度为0的起点，也就是真正的起点，那么该图中所有结点的最短路径一定是比较了所有原图中起点之后所获得的，并且边权为0，不会影响最短距离。

然后对于每一个查询的考生科目，判断是否在原图中是入度为0的结点，如果是，输出You may take test T directly.，否则使用DFS遍历该结点的路径(在获取最短距离的时候，每一个结点的前驱保存在了pre数组中，因此可以直接获取)

注意点：

1、如果多次使用迪杰斯特拉算法，最后两个测试点会超时。

提交结果：

AC代码：

#include
#include
#include
#include
#include

using namespace std;

int N,M;//顶点数和边数
vector Adj[1005];//邻接表
int score[1005][1005];//score[a][b]代表a测试点获得的最低得分可以有资格考b考试
int voucher[1005][1005];//voucher[a][b]代表a测试点获得score[a][b]及以上分数可以得到考b的代金券
int inDegree[1005];// 每一个顶点的入度
bool inQueue[1005];// 标记已经入队的节点
unordered_set zeroDegree;// 图中所有入度为0的顶点,这里指原图中入度为0的顶点 

// 拓扑排序判断是否有环存在 
bool topologicalOrder(){
    queue q;
    int num = 0;
    // 入队所有入度为0的顶点
    for(int i=0;idis[min_index]+score[min_index][v]){
                    // 当前路径更短
                    pre[v] = min_index;
                    dis[v] = dis[min_index]+score[min_index][v];
                    money[v] = money[min_index] + voucher[min_index][v];
                } else if(dis[v]==dis[min_index]+score[min_index][v]&&money[v]%d",end);
}

void consistent(int query[],int K){
    Dijsktra(N);// 获得每一个结点的最短距离和路径 
    for(int i=0;i