MPToolkit 得到非定域性（3）

一.需要准备好文件

   cp  -r   ~/Wen/SU2/alpha_0.2/data/0/driver7_PartialNonlocality_L_openMPS_R_complex_20.m    ~/Wen/SU2/alpha_0.2/data/${COUNT_job}/driver7_PartialNonlocality_L_openMPS_R_complex_20.m

注意complex文件里面的n=20可以换

二.在matlab里面得到Bell.mat文件

  matlab -nojvm -nodesktop
  ##打开不带图形界面的matlab
  driver7_PartialNonlocality_L_openMPS_R_complex_20
  ##不能加.m
  exit

三.实现代码

    for(( COUNT_job=0; COUNT_job<=6; COUNT_job++ ))
    do

      lockfile -1 -r 1 ~/Wen/SU2/alpha_0.2/data/${COUNT_job}.lock
          if [ $? == 0 ];     then
           cd ~/Wen/SU2/alpha_0.2/data/${COUNT_job}
           cp   -r  ~/Wen/SU2/alpha_0.2/data/0/driver7_PartialNonlocality_L_openMPS_R_complex_20.m    ~/Wen/SU2/alpha_0.2/data/${COUNT_job}/driver7_PartialNonlocality_L_openMPS_R_complex_20.m
           matlab -nojvm -nodesktop < driver7_PartialNonlocality_L_openMPS_R_complex_20.m
           echo "job ${COUNT_job} is over" 
         fi
    done