cuiluoen5932
cuiluoen5932

Solaris本地集群VCS安装过程（试用License）

bash-3.2# ./installer -rsh


     Storage Foundation and High Availability Solutions 6.0 Install Program     


Copyright (c) 2011 Symantec Corporation. All rights reserved.  Symantec, the 
Symantec Logo are trademarks or registered trademarks of Symantec Corporation or
its affiliates in the U.S. and other countries. Other names may be trademarks of
their respective owners.


The Licensed Software and Documentation are deemed to be "commercial computer 
software" and "commercial computer software documentation" as defined in FAR 
Sections 12.212 and DFARS Section 227.7202.


Logs are being written to /var/tmp/installer-201406261050Llh while installer is 
in progress.




Symantec Product                                   Version Installed    Licensed
================================================================================
Symantec Licensing Utilities (VRTSvlic) are not installed due to which products 
and licenses are not discovered.
Use the menu below to continue.




Task Menu:


    P) Perform a Pre-Installation Check        I) Install a Product
    C) Configure an Installed Product          G) Upgrade a Product
    O) Perform a Post-Installation Check       U) Uninstall a Product
    L) License a Product                       S) Start a Product
    D) View Product Descriptions               X) Stop a Product
    R) View Product Requirements               ?) Help


Enter a Task: [P,I,C,G,O,U,L,S,D,X,R,?] i
















     Storage Foundation and High Availability Solutions 6.0 Install Program     


     1)  Veritas Dynamic Multi-Pathing (DMP)
     2)  Veritas Cluster Server (VCS)
     3)  Veritas Storage Foundation (SF)
     4)  Veritas Storage Foundation and High Availability (SFHA)
     5)  Veritas Storage Foundation Cluster File System HA (SFCFSHA)
     6)  Symantec VirtualStore (SVS)
     7)  Veritas Storage Foundation for Sybase ASE CE (SFSYBASECE)
     8)  Veritas Storage Foundation for Oracle RAC (SF Oracle RAC)
     b)  Back to previous menu


Select a product to install: [1-8,b,q] 2
Do you agree with the terms of the End User License Agreement as specified in 
the cluster_server/EULA/en/EULA_VCS_Ux_6.0.pdf file present on media? [y,n,q,?] y










                   Veritas Cluster Server 6.0 Install Program                   


     1)  Install minimal required packages - 306 MB required
     2)  Install recommended packages - 492 MB required
     3)  Install all packages - 519 MB required
     4)  Display packages to be installed for each option


Select the packages to be installed on all systems? [1-4,q,?] (2) 3
Enter the Solaris Sparc system names separated by spaces: [q,?] omc1 omc2










Veritas Cluster Server 6.0 Install Program                                          
               omc1 omc2                                                          


Logs are being written to /var/tmp/installer-201406240932mqO while installer is in progress


    Verifying systems: 100%                                                                                               


    Estimated time remaining: (mm:ss) 0:00                                                                         8 of 8


    Checking system communication .................................................................................. Done
    Checking release compatibility ................................................................................. Done
    Checking installed product ..................................................................................... Done
    Checking prerequisite patches and packages ..................................................................... Done
    Checking platform version ...................................................................................... Done
    Checking file system free space ................................................................................ Done
    Checking product licensing ..................................................................................... Done
    Performing product prechecks ................................................................................... Done
System verification checks completed


Systems have difference in clock by more than 5 seconds


System clocks can be synchronized using one or more Network Time Protocol (NTP) 
servers


Do you want to synchronize system clocks with NTP server(s)? [y,n,q] (y) n








                                    omc1 omc2                                   


The following Veritas Cluster Server packages will be installed on all systems:


Package           Package Description


VRTSvlic          Veritas Licensing
VRTSperl          Veritas Perl 5.12.2 Redistribution
VRTSsfcpi60       Veritas Storage Foundation Installer
VRTSspt           Veritas Software Support Tools by Symantec
VRTSllt           Veritas Low Latency Transport
VRTSgab           Veritas Group Membership and Atomic Broadcast
VRTSvxfen         Veritas I/O Fencing by Symantec
VRTSamf           Veritas Asynchronous Monitoring Framework by Symantec
VRTSvcs           Veritas Cluster Server
VRTScps           Veritas Cluster Server - Coordinated Point Server
VRTSvcsag         Veritas Cluster Server Bundled Agents by Symantec
VRTSvcsea         Veritas Cluster Server Enterprise Agents by Symantec
VRTSsfmh          Veritas Storage Foundation Managed Host by Symantec
VRTSvbs           Veritas Virtual Business Service


Press [Enter] to continue:  ----直接回车












                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


Logs are being written to /var/tmp/installer-201406261050Llh while installer is 
in progress


    Installing VCS: 0%   ___________________________________________________ 


    Estimated time remaining: (mm:ss)                                0 of 16


    Performing VCS preinstall tasks     Installing VCS: 6%      ________________________________________________ 


    Estimated time remaining: (mm:ss) 0:45                           1 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VCS: 6%      ________________________________________________ 


    Estimated time remaining: (mm:ss) 0:45                           1 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package     Installing VCS: 12%        _____________________________________________ 


    Estimated time remaining: (mm:ss) 0:45                           2 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VCS: 12%        _____________________________________________ 


    Estimated time remaining: (mm:ss) 0:45                           2 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package     Installing VCS: 18%           __________________________________________ 


    Estimated time remaining: (mm:ss) 1:20                           3 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VCS: 18%           __________________________________________ 


    Estimated time remaining: (mm:ss) 1:20                           3 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package     Installing VCS: 25%              _______________________________________ 


    Estimated time remaining: (mm:ss) 1:15                           4 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VCS: 25%              _______________________________________ 


    Estimated time remaining: (mm:ss) 1:15                           4 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package Jun 26 11:12:23 omc1 llt: LLT INFO V-14-1-10009 LLT 6.0 Protocol available
    Installing VCS: 31%                 ____________________________________ 


    Estimated time remaining: (mm:ss) 1:10                           5 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VCS: 31%                 ____________________________________ 


    Estimated time remaining: (mm:ss) 1:10                           5 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package Jun 26 11:12:30 omc1 gab: GAB INFO V-15-1-20021 GAB 6.0 available
    Installing VCS: 37%                    _________________________________ 


    Estimated time remaining: (mm:ss) 1:10                           6 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VCS: 37%                    _________________________________ 


    Estimated time remaining: (mm:ss) 1:10                           6 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package Jun 26 11:12:38 omc1 vxfen: NOTICE: VXFEN INFO V-11-1-56 VxFEN 6.0 loaded. Protocol versions supported: 10,20,30
    Installing VCS: 43%                       ______________________________ 


    Estimated time remaining: (mm:ss) 1:04                           7 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VCS: 43%                       ______________________________ 


    Estimated time remaining: (mm:ss) 1:04                           7 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package     Installing VCS: 50%                           __________________________ 


    Estimated time remaining: (mm:ss) 0:55                           8 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VCS: 50%                           __________________________ 


    Estimated time remaining: (mm:ss) 0:55                           8 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package     Installing VCS: 56%                              _______________________ 


    Estimated time remaining: (mm:ss) 0:55                           9 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VCS: 56%                              _______________________ 


    Estimated time remaining: (mm:ss) 0:55                           9 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package     Installing VCS: 62%                                 ____________________ 


    Estimated time remaining: (mm:ss) 0:45                          10 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VCS: 62%                                 ____________________ 


    Estimated time remaining: (mm:ss) 0:45                          10 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package     Installing VCS: 68%                                    _________________ 


    Estimated time remaining: (mm:ss) 0:35                          11 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VCS: 68%                                    _________________ 


    Estimated time remaining: (mm:ss) 0:35                          11 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package     Installing VCS: 75%                                        _____________ 


    Estimated time remaining: (mm:ss) 0:25                          12 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VCS: 75%                                        _____________ 


    Estimated time remaining: (mm:ss) 0:25                          12 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package     Installing VCS: 81%                                           __________ 


    Estimated time remaining: (mm:ss) 0:25                          13 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VCS: 81%                                           __________ 


    Estimated time remaining: (mm:ss) 0:25                          13 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package     Installing VCS: 87%                                              _______ 


    Estimated time remaining: (mm:ss) 0:15                          14 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package ....................................... Done
    Installing VCS: 87%                                              _______ 


    Estimated time remaining: (mm:ss) 0:15                          14 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package ....................................... Done
    Installing VRTSvbs package     Installing VCS: 93%                                                 ____ 


    Estimated time remaining: (mm:ss) 0:05                          15 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package ....................................... Done
    Installing VRTSvbs package ........................................ Done
    Installing VCS: 93%                                                 ____ 


    Estimated time remaining: (mm:ss) 0:05                          15 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package ....................................... Done
    Installing VRTSvbs package ........................................ Done
    Performing VCS postinstall tasks     Installing VCS: 100%                                                     


    Estimated time remaining: (mm:ss) 0:00                          16 of 16


    Performing VCS preinstall tasks ................................... Done
    Installing VRTSvlic package ....................................... Done
    Installing VRTSperl package ....................................... Done
    Installing VRTSspt package ........................................ Done
    Installing VRTSllt package ........................................ Done
    Installing VRTSgab package ........................................ Done
    Installing VRTSvxfen package ...................................... Done
    Installing VRTSamf package ........................................ Done
    Installing VRTSvcs package ........................................ Done
    Installing VRTScps package ........................................ Done
    Installing VRTSvcsag package ...................................... Done
    Installing VRTSvcsea package ...................................... Done
    Installing VRTSsfcpi60 package .................................... Done
    Installing VRTSsfmh package ....................................... Done
    Installing VRTSvbs package ........................................ Done
    Performing VCS postinstall tasks .................................. Done


Veritas Cluster Server Install completed successfully










                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


To comply with the terms of Symantec's End User License Agreement, you have 60 
days to either:


 * Enter a valid license key matching the functionality in use on the systems
 * Enable keyless licensing and manage the systems with a Management Server. For
more details visit http://go.symantec.com/sfhakeyless. The product is fully 
functional during these 60 days.


     1)  Enter a valid license key
     2)  Enable keyless licensing and complete system licensing later


How would you like to license the systems? [1-2,q] (2) 2










                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


Would you like to enable the Global Cluster Option? [y,n,q] (n) n


Registering VCS license


Would you like to configure VCS on omc1 omc2? [y,n,q] (n) y


I/O Fencing


It needs to be determined at this time if you plan to configure I/O Fencing in 
enabled or disabled mode, as well as help in determining the number of network 
interconnects (NICS) required on your systems. If you configure I/O Fencing in 
enabled mode, only a single NIC is required, though at least two are 
recommended.


A split brain can occur if servers within the cluster become unable to 
communicate for any number of reasons. If I/O Fencing is not enabled, you run 
the risk of data corruption should a split brain occur. Therefore, to avoid data
corruption due to split brain in CFS environments, I/O Fencing has to be 
enabled.


If you do not enable I/O Fencing, you do so at your own risk


See the Administrator's Guide for more information on I/O Fencing


Do you want to configure I/O Fencing in enabled mode? [y,n,q,?] (y) n














                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


To configure VCS, answer the set of questions on the next screen.


When [b] is presented after a question, 'b' may be entered to go back to the 
first question of the configuration set.


When [?] is presented after a question, '?' may be entered for help or 
additional information about the question.


Following each set of questions, the information you have entered will be 
presented for confirmation.  To repeat the set of questions and correct any 
previous errors, enter 'n' at the confirmation prompt.


No configuration changes are made to the systems until all configuration 
questions are completed and confirmed.


Press [Enter] to continue: ----直接按回车














                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


To configure VCS the following information is required:


        A unique cluster name
        A unique cluster ID number between 0-65535
        Two or more NICs per system used for heartbeat links


        One or more heartbeat links are configured as private links
        You can configure one heartbeat link as a low-priority link


All systems are being configured to create one cluster.


Enter the unique cluster name: [q,?] omc1














                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


     1)  Configure heartbeat links using LLT over Ethernet
     2)  Configure heartbeat links using LLT over UDP
     3)  Automatically detect configuration for LLT over Ethernet
     b)  Back to previous menu


How would you like to configure heartbeat links? [1-3,b,q,?] (1) 1


    Discovering NICs on omc1  Discovered nxge0 nxge1 nxge2 nxge3 igb0 igb1 igb2 igb3 nxge4 nxge5 nxge6 nxge7 usbecm0


Enter the NIC for the first private heartbeat link on omc1: [b,q,?] (nxge0) igb0
igb0 has an IP address configured on it. It could be a public NIC on omc1.
Are you sure you want to use igb0 for the first private heartbeat link? 
[y,n,q,b,?] (n) y
Would you like to configure a second private heartbeat link? [y,n,q,b,?] (y) y
Enter the NIC for the second private heartbeat link on omc1: [b,q,?] (nxge0) igb2
Would you like to configure a third private heartbeat link? [y,n,q,b,?] (n) n
Do you want to configure an additional low-priority heartbeat link? [y,n,q,b,?] 
(n) n
Are you using the same NICs for private heartbeat links on all systems? 
[y,n,q,b,?] (y) n






   Discovering NICs on omc2  Discovered nxge0 nxge1 nxge2 nxge3 igb0 igb1 igb2 igb3 nxge4 nxge5 nxge6 nxge7 usbecm0


Enter the NIC for the first private heartbeat link on omc2: [b,q,?] (nxge0) igb0 
igb0 has an IP address configured on it. It could be a public NIC on omc2.
Are you sure you want to use igb0 for the first private heartbeat link? 
[y,n,q,b,?] (n) y
Would you like to configure a second private heartbeat link? [y,n,q,b,?] (y) y
Enter the NIC for the second private heartbeat link on omc2: [b,q,?] (nxge0) igb2
Would you like to configure a third private heartbeat link? [y,n,q,b,?] (n) n
Do you want to configure an additional low-priority heartbeat link? [y,n,q,b,?] 
(n) n
    Checking media speed for igb0 on omc1 ......................... 100 Mbps
    Checking media speed for igb2 on omc1 ......................... 100 Mbps
    Checking media speed for igb0 on omc2 ......................... 100 Mbps
    Checking media speed for igb2 on omc2 ......................... 100 Mbps






Enter a unique cluster ID number between 0-65535: [b,q,?] (60944) -----直接回车
The cluster cannot be configured if the cluster ID 60944 is in use by another 
cluster. Installer can perform a check to determine if the cluster ID is 
duplicate. The check will take less than a minute to complete.
Would you like to check if the cluster ID is in use by another cluster? [y,n,q] 
(y) y
    Checking cluster ID ............................................... Done
Duplicated cluster ID detection passed. The cluster ID 60944 can be used for the
cluster.


Press [Enter] to continue:   -----直接回车






                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


Cluster information verification:


        Cluster Name:      omc1
        Cluster ID Number: 60944
        Private Heartbeat NICs for omc1: 
                link1=igb0
                link2=igb2
        Private Heartbeat NICs for omc2: 
                link1=igb0
                link2=igb2


Is this information correct? [y,n,q,?] (y) y












                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


The following data is required to configure the Virtual IP of the Cluster:


        A public NIC used by each system in the cluster
        A Virtual IP address and netmask


Do you want to configure the Virtual IP? [y,n,q,?] (n) n
















                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


Veritas Cluster Server can be configured in secure mode


Running VCS in Secure Mode guarantees that all inter-system communication is 
encrypted, and users are verified with security credentials.


When running VCS in Secure Mode, NIS and system usernames and passwords are used
to verify identity. VCS usernames and passwords are no longer utilized when a 
cluster is running in Secure Mode.


Would you like to configure the VCS cluster in secure mode? [y,n,q,?] (n) n










                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


The following information is required to add VCS users:


        A user name
        A password for the user
        User privileges (Administrator, Operator, or Guest)


Do you wish to accept the default cluster credentials of 'admin/password'? 
[y,n,q] (y) y














                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


The following information is required to add VCS users:


        A user name
        A password for the user
        User privileges (Administrator, Operator, or Guest)


Do you wish to accept the default cluster credentials of 'admin/password'? 
[y,n,q] (y) y


Do you want to add another user to the cluster? [y,n,q] (n) n












                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


VCS User verification:


        User: admin     Privilege: Administrators


        Passwords are not displayed


Is this information correct? [y,n,q] (y) y












                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


The following information is required to configure SMTP notification:


        The domain-based hostname of the SMTP server
        The email address of each SMTP recipient
        A minimum severity level of messages to send to each recipient


Do you want to configure SMTP notification? [y,n,q,?] (n) n












                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


The following information is required to configure SNMP notification:


        System names of SNMP consoles to receive VCS trap messages
        SNMP trap daemon port numbers for each console
        A minimum severity level of messages to send to each console


Do you want to configure SNMP notification? [y,n,q,?] (n) n










                   Veritas Cluster Server 6.0 Install Program                   
                                    omc1 omc2                                   


Logs are being written to /var/tmp/installer-201406261050Llh while installer is 
in progress


    Starting VCS: 0%   _____________________________________________________ 


    Estimated time remaining: (mm:ss)                                 0 of 7


    Performing VCS configuration     Starting VCS: 14%         ______________________________________________ 


    Estimated time remaining: (mm:ss) 1:10                            1 of 7


    Performing VCS configuration ...................................... Done
    Starting VCS: 14%         ______________________________________________ 


    Estimated time remaining: (mm:ss) 1:10                            1 of 7


    Performing VCS configuration ...................................... Done
    Starting llt     Starting VCS: 28%                _______________________________________ 


    Estimated time remaining: (mm:ss) 1:02                            2 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting VCS: 28%                _______________________________________ 


    Estimated time remaining: (mm:ss) 1:02                            2 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab Jun 26 11:28:17 omc1 llt: LLT INFO V-14-1-10499 recvarpack link 0 for node 1 addr change from 00:00:00:00:00:00 to 00:10:E0:56:B2:BA
Jun 26 11:28:17 omc1 llt: LLT INFO V-14-1-10499 recvarpack link 1 for node 1 addr change from 00:00:00:00:00:00 to 00:10:E0:56:B2:BC
Jun 26 11:28:17 omc1 gab: GAB INFO V-15-1-20026 Port a[GAB_Control (refcount 2)] registration waiting for seed port membership
Jun 26 11:28:18 omc1 llt: LLT INFO V-14-1-10024 link 1 (igb2) node 1 active
    Starting VCS: 42%                        _______________________________ 


    Estimated time remaining: (mm:ss) 0:35                            3 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting VCS: 42%                        _______________________________ 


    Estimated time remaining: (mm:ss) 0:35                            3 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf Jun 26 11:28:20 omc1 amf: NOTICE: amf: initializing
Jun 26 11:28:20 omc1 amf: AMF Driver version 6.0 loaded
Jun 26 11:28:20 omc1 llt: LLT INFO V-14-1-10024 link 0 (igb0) node 1 active
Jun 26 11:28:20 omc1 amf: AMF Driver configured
Jun 26 11:28:24 omc1 gab: GAB INFO V-15-1-20036 Port a[GAB_Control (refcount 1)] gen   a12a01 membership 01
    Starting VCS: 57%                                _______________________ 


    Estimated time remaining: (mm:ss) 0:25                            4 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting VCS: 57%                                _______________________ 


    Estimated time remaining: (mm:ss) 0:25                            4 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had Jun 26 11:28:36 omc1 gab: GAB INFO V-15-1-20036 Port h[GAB_USER_CLIENT (refcount 0)] gen   a12a03 membership 0
Jun 26 11:28:36 omc1 gab: GAB INFO V-15-1-20038 Port h[GAB_USER_CLIENT (refcount 0)] gen   a12a03 k_jeopardy ;1
Jun 26 11:28:36 omc1 gab: GAB INFO V-15-1-20040 Port h[GAB_USER_CLIENT (refcount 0)] gen   a12a03    visible ;1
Jun 26 11:28:47 omc1 gab: GAB INFO V-15-1-20036 Port h[GAB_USER_CLIENT (refcount 0)] gen   a12a04 membership 01
    Starting VCS: 71%                                       ________________ 


    Estimated time remaining: (mm:ss) 0:20                            5 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had ...................................................... Done
    Starting VCS: 71%                                       ________________ 


    Estimated time remaining: (mm:ss) 0:20                            5 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had ...................................................... Done
    Starting CmdServer     Starting VCS: 85%                                               ________ 


    Estimated time remaining: (mm:ss) 0:10                            6 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had ...................................................... Done
    Starting CmdServer ................................................ Done
    Starting VCS: 85%                                               ________ 


    Estimated time remaining: (mm:ss) 0:10                            6 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had ...................................................... Done
    Starting CmdServer ................................................ Done
    Performing VCS poststart tasks     Starting VCS: 100%                                                       


    Estimated time remaining: (mm:ss) 0:00                            7 of 7


    Performing VCS configuration ...................................... Done
    Starting llt ...................................................... Done
    Starting gab ...................................................... Done
    Starting amf ...................................................... Done
    Starting had ...................................................... Done
    Starting CmdServer ................................................ Done
    Performing VCS poststart tasks .................................... Done


Veritas Cluster Server Startup completed successfully




Checking online updates for Veritas Cluster Server 6.0


        Attempted to connect to https://sort.symantec.com to check for product 
updates, but connection failed.
        Please visit https://sort.symantec.com to check for available product 
updates and information.


installer log files, summary file, and response file are saved at:


        /opt/VRTS/install/logs/installer-201406261050Llh


Would you like to view the summary file? [y,n,q] (n) n
bash-3.2# 
bash-3.2# 
bash-3.2# 


































VCS资源配置配置文件
bash-3.2# cd /etc/VRTSvcs/conf/config 
bash-3.2# ls
Db2udbTypes.cf                        SybaseTypes.cf                        main.cf.21Nov2014.14.38.18            main.cf.21Nov2014.19.20.03
Db2udbTypes.cf.20Nov2014.16.07.40     SybaseTypes.cf.20Nov2014.16.07.40     main.cf.21Nov2014.14.40.15            main.cf.22Nov2014.09.08.22
Db2udbTypes.cf.previous               SybaseTypes.cf.previous               main.cf.21Nov2014.15.14.19            main.cf.22Nov2014.09.24.27
OracleASMTypes.cf                     main.cf                               main.cf.21Nov2014.16.58.16            main.cf.22Nov2014.09.28.41
OracleASMTypes.cf.20Nov2014.16.07.40  main.cf.20Nov2014.16.07.40            main.cf.21Nov2014.17.17.26            main.cf.22Nov2014.09.33.08
OracleASMTypes.cf.previous            main.cf.21Nov2014.14.10.20            main.cf.21Nov2014.17.35.41            main.cf.previous
OracleTypes.cf                        main.cf.21Nov2014.14.25.58            main.cf.21Nov2014.18.09.54            types.cf
OracleTypes.cf.20Nov2014.16.07.40     main.cf.21Nov2014.14.29.11            main.cf.21Nov2014.18.16.44            types.cf.20Nov2014.16.07.40
OracleTypes.cf.previous               main.cf.21Nov2014.14.32.09            main.cf.21Nov2014.18.47.58            types.cf.previous
bash-3.2# 
bash-3.2# 
bash-3.2# cat main.cf                 
include "OracleASMTypes.cf"
include "types.cf"
include "Db2udbTypes.cf"
include "OracleTypes.cf"
include "SybaseTypes.cf"


cluster omc1 (
        UserNames = { admin = IJKcJEjGKfKKiSKeJH }
        Administrators = { admin }
        )


system omc1 (
        )


system omc2 (
        )


group EMS (
        SystemList = { omc1 = 0, omc2 = 1 }
        )


        Application ems_app (
                StartProgram = "/EMS/ems/ums-server/console.sh console1 /export/home/cluster/ems/vcs"
                StopProgram = "/export/home/cluster/ems/vcs/off-line.sh console1"
                MonitorProgram = "/export/home/cluster/ems/vcs/monitor.sh console1"
                )


        IPMultiNICB ems_ip (
                BaseResName = ems_nic
                Address = "30.30.160.1"
                NetMask = "255.255.0.0"
                )


        Mount ems_data1_mount (
                Critical = 0
                MountPoint = "/datafile/u02"
                BlockDevice = "/dev/dsk/c8t60080E50003F53BC000006B1546D01CFd0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_data2_monnt (
                Critical = 0
                MountPoint = "/datafile/u03"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA00000702546D02A0d0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_data3_mount (
                Critical = 0
                MountPoint = "/datafile/u04"
                BlockDevice = "/dev/dsk/c8t60080E50003F53BC000006B3546D0222d0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_data4_mount (
                Critical = 0
                MountPoint = "/datafile/u05"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA00000704546D02F3d0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_data5_mount (
                Critical = 0
                MountPoint = "/datafile/u06"
                BlockDevice = "/dev/dsk/c8t60080E50003F53BC000006B5546D0281d0s7"
                FSType = ufs
                MountOpt = forcediretio
                FsckOpt = "-n"
                )


        Mount ems_data6_mount (
                Critical = 0
                MountPoint = "/datafile/u07"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA00000706546D034Cd0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_icm_mount (
                Critical = 0
                MountPoint = "/ICM/icm"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA000006FE546D01BBd0s7"
                FSType = ufs
                FsckOpt = "-n"
                )


        Mount ems_license_mount (
                Critical = 0
                MountPoint = "/License"
                BlockDevice = "/dev/dsk/c8t60080E50003F53BC000006AF546D014Cd0s7"
                FSType = ufs
                FsckOpt = "-n"
                )


        Mount ems_mount (
                MountPoint = "/EMS/ems"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA000006FB546D0138d0s7"
                FSType = ufs
                FsckOpt = "-n"
                )


        Mount ems_oracle_mount (
                MountPoint = "/datafile/u01"
                BlockDevice = "/dev/dsk/c8t60080E50003F20FA00000700546D0248d0s7"
                FSType = ufs
                MountOpt = forcedirectio
                FsckOpt = "-n"
                )


        Mount ems_rct_mount (
                Critical = 0
                MountPoint = "/RCT/rct"
                BlockDevice = "/dev/dsk/c8t60080E50003F53BC000006AD546D00E3d0s7"
                FSType = ufs
                FsckOpt = "-n"
                )


        MultiNICB ems_nic (
                UseMpathd = 1
                Device = { igb1 = "", igb3 = "" }
                NetworkHosts = { "30.30.1.45" }
                )


        Netlsnr ems_Netlsnr (
                Owner = oracle
                Home = "/oracle/app/oracle/product/11.2.0/dbhome_1"
                Listener = LISTENER_MINOS
                )


        Oracle ems_oracle (
                Sid = minos
                Owner = oracle
                Home = "/oracle/app/oracle/product/11.2.0/dbhome_1"
                )


        ems_Netlsnr requires ems_ip
        ems_Netlsnr requires ems_oracle
        ems_app requires ems_Netlsnr
        ems_app requires ems_mount
        ems_ip requires ems_nic
        ems_oracle requires ems_data1_mount
        ems_oracle requires ems_data2_monnt
        ems_oracle requires ems_data3_mount
        ems_oracle requires ems_data4_mount
        ems_oracle requires ems_data5_mount
        ems_oracle requires ems_data6_mount
        ems_oracle requires ems_icm_mount
        ems_oracle requires ems_license_mount
        ems_oracle requires ems_oracle_mount
        ems_oracle requires ems_rct_mount




        // resource dependency tree
        //
        //      group EMS
        //      {
        //      Application ems_app
        //          {
        //          Netlsnr ems_Netlsnr
        //              {
        //              IPMultiNICB ems_ip
        //                  {
        //                  MultiNICB ems_nic
        //                  }
        //              Oracle ems_oracle
        //                  {
        //                  Mount ems_data1_mount
        //                  Mount ems_data4_mount
        //                  Mount ems_icm_mount
        //                  Mount ems_data2_monnt
        //                  Mount ems_data5_mount
        //                  Mount ems_license_mount
        //                  Mount ems_data3_mount
        //                  Mount ems_data6_mount
        //                  Mount ems_rct_mount
        //                  Mount ems_oracle_mount
        //                  }
        //              }
        //          Mount ems_mount
        //          }
        //      }




bash-3.2# 














hastop -all -force ---停VCS双机
然后在两台机器上都执行hastart




查看VCS双机状态：
bash-3.2# hastatus -sum


-- SYSTEM STATE
-- System               State                Frozen              


A  omc1                 RUNNING              0                    
A  omc2                 RUNNING              0                    


-- GROUP STATE
-- Group           System               Probed     AutoDisabled    State          


B  EMS             omc1                 Y          N               ONLINE         
B  EMS             omc2                 Y          N               OFFLINE        
bash-3.2# 






VCS双机启停命令：
hastart   ----启动双机
hastop -all -force  ——停止双机
hastatus ——查看双机状态

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/31520497/viewspace-2151384/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/31520497/viewspace-2151384/

你可能感兴趣的:(数据库,网络)

  • Google earth studio 简介 陟彼高冈yu 旅游
    GoogleEarthStudio是一个基于Web的动画工具，专为创作使用GoogleEarth数据的动画和视频而设计。它利用了GoogleEarth强大的三维地图和卫星影像数据库，使用户能够轻松地创建逼真的地球动画、航拍视频和动态地图可视化。网址为https://www.google.com/earth/studio/。GoogleEarthStudio是一个基于Web的动画工具，专为创作使用G
  • 基于社交网络算法优化的二维最大熵图像分割 智能算法研学社（Jack旭） 智能优化算法应用图像分割算法php开发语言
    智能优化算法应用：基于社交网络优化的二维最大熵图像阈值分割-附代码文章目录智能优化算法应用：基于社交网络优化的二维最大熵图像阈值分割-附代码1.前言2.二维最大熵阈值分割原理3.基于社交网络优化的多阈值分割4.算法结果：5.参考文献：6.Matlab代码摘要：本文介绍基于最大熵的图像分割，并且应用社交网络算法进行阈值寻优。1.前言阅读此文章前，请阅读《图像分割：直方图区域划分及信息统计介绍》htt
  • 关于提高复杂业务逻辑代码可读性的思考 编程经验分享 开发经验java数据库开发语言
    目录前言需求场景常规写法拆分方法领域对象总结前言实际工作中大部分时间都是在写业务逻辑，一般都是三层架构，表示层（Controller）接收客户端请求，并对入参做检验，业务逻辑层（Service）负责处理业务逻辑，一般开发都是在这一层中写具体的业务逻辑。数据访问层（Dao）是直接和数据库交互的，用于查数据给业务逻辑层，或者是将业务逻辑层处理后的数据写入数据库。简单的增删改查接口不用多说，基本上写好一
  • SQL Server_查询某一数据库中的所有表的内容 qq_42772833 SQLServer数据库sqlserver
    1.查看所有表的表名要列出CrabFarmDB数据库中的所有表（名），可以使用以下SQL语句：USECrabFarmDB;--切换到目标数据库GOSELECTTABLE_NAMEFROMINFORMATION_SCHEMA.TABLESWHERETABLE_TYPE='BASETABLE';对这段SQL脚本的解释：SELECTTABLE_NAME：这个语句的作用是从查询结果中选择TABLE_NAM
  • 2023-04-17|篮球女孩 长一木
    1小学抑或初中阶段，在课外书了解到她的故事。“篮球女孩”。当时佩服她的顽强，也对生命多了一丝敬畏。今天刚好在公众号看到，长大后的“篮球女孩”。佩服之余又满是心疼。网络侵删祝那素未蒙面的女孩，未来一切顺遂。
  • 深入理解 MultiQueryRetriever：提升向量数据库检索效果的强大工具 nseejrukjhad 数据库python
    深入理解MultiQueryRetriever：提升向量数据库检索效果的强大工具引言在人工智能和自然语言处理领域，高效准确的信息检索一直是一个关键挑战。传统的基于距离的向量数据库检索方法虽然广泛应用，但仍存在一些局限性。本文将介绍一种创新的解决方案：MultiQueryRetriever，它通过自动生成多个查询视角来增强检索效果，提高结果的相关性和多样性。MultiQueryRetriever的工
  • 在一台Ubuntu计算机上构建Hyperledger Fabric网络 落叶无声9 区块链超级账本Hyperledgerfabric区块链ubuntu构建hyperledgerfabric
    在一台Ubuntu计算机上构建HyperledgerFabric网络Hyperledgerfabric是一个开源的区块链应用程序平台，为开发基于区块链的应用程序提供了一个起点。当我们提到HyperledgerFabric网络时，我们指的是使用HyperledgerFabric的正在运行的系统。即使只使用最少数量的组件，部署Fabric网络也不是一件容易的事。Fabric社区创建了一个名为Cello
  • MongoDB Oplog 窗口 喝醉酒的小白 MongoDB运维
    在MongoDB中，oplog（操作日志）是一个特殊的日志系统，用于记录对数据库的所有写操作。oplog允许副本集成员（通常是从节点）应用主节点上已经执行的操作，从而保持数据的一致性。它是MongoDB副本集实现数据复制的基础。MongoDBOplog窗口oplog窗口是指在MongoDB副本集中，从节点可以用来同步数据的时间范围。这个窗口通常由以下因素决定：Oplog大小：oplog的大小是有限
  • 【华为OD技术面试真题 - 技术面】-测试八股文真题题库（1） 算法大师 华为od面试python算法前端
    华为OD面试真题精选专栏：华为OD面试真题精选目录:2024华为OD面试手撕代码真题目录以及八股文真题目录文章目录华为OD面试真题精选1.黑盒测试和白盒测试的区别2.假设我们公司现在开发一个类似于微信的软件1.0版本，现在要你测试这个功能：打开聊天窗口，输入文本，限制字数在200字以内。问你怎么提取测试点。功能测试性能测试安全性测试可用性测试跨平台兼容性测试网络环境测试3.接口测试的工具你了解哪些
  • python os 环境变量 CV矿工 python开发语言numpy
    环境变量：环境变量是程序和操作系统之间的通信方式。有些字符不宜明文写进代码里，比如数据库密码，个人账户密码，如果写进自己本机的环境变量里，程序用的时候通过os.environ.get（）取出来就行了。os.environ是一个环境变量的字典。环境变量的相关操作importos"""设置/修改环境变量：os.environ[‘环境变量名称’]=‘环境变量值’#其中key和value均为string类
  • 【PG】常见数据库、表属性设置 江无羡 数据库
    PG的常见属性配置方法数据库复制、备份相关表的复制标识单表操作批量表操作链接数据库复制、备份相关表的复制标识单表操作通过ALTER语句单独更改一张表的复制标识。ALTERTABLE[tablename]REPLICAIDENTITYFULL;批量表操作通过代码块的方式，对某个schema中的所有表一起更新其复制标识。SELECTtablename,CASErelreplidentWHEN'd'TH
  • 《在战“疫”中成长致敬生活》观后感 梅子刘的刀
    （作者：周晨）今天上午，我看了“我是接班人”网络大课堂《在战役中成长致敬生活》。有很多人拿出自己攒下的钱，默默地捐给了武汉，有几千块钱的、有几万块钱的，也有十几万块钱的。连小朋友也把自己的压岁钱捐给了武汉。有名环卫工人把自己五年的积蓄全部捐给了武汉。有名外卖小哥为医护人员买鞋子送吃的。还有已经治愈出院的新型肺炎病人捐了400毫升的血浆。还有位叫大树的叔叔，虽然他没有钱，但是他地里有蔬菜，捐了几大卡
  • nosql数据库技术与应用知识点 皆过客，揽星河 NoSQLnosql数据库大数据数据分析数据结构非关系型数据库
    Nosql知识回顾大数据处理流程数据采集(flume、爬虫、传感器)数据存储(本门课程NoSQL所处的阶段)Hdfs、MongoDB、HBase等数据清洗(入仓)Hive等数据处理、分析(Spark、Flink等)数据可视化数据挖掘、机器学习应用(Python、SparkMLlib等)大数据时代存储的挑战(三高)高并发(同一时间很多人访问)高扩展(要求随时根据需求扩展存储)高效率(要求读写速度快)
  • insert into select 主键自增_mybatis拦截器实现主键自动生成 weixin_39521651 insertintoselect主键自增mybatisdelete返回值mybatisinsert返回主键mybatisinsert返回对象mybatisplusinsert返回主键mybatisplus插入生成id
    前言前阵子和朋友聊天，他说他们项目有个需求，要实现主键自动生成，不想每次新增的时候，都手动设置主键。于是我就问他，那你们数据库表设置主键自动递增不就得了。他的回答是他们项目目前的id都是采用雪花算法来生成，因此为了项目稳定性，不会切换id的生成方式。朋友问我有没有什么实现思路，他们公司的orm框架是mybatis，我就建议他说，不然让你老大把mybatis切换成mybatis-plus。mybat
  • 中原焦点团队网络初中级30期阴丽丽坚持分享第三百八十八次2022.10.18分享 约练次数（74） 咨询师（6） 来访者（53） 观察者（15） 阴丽丽
    今天是忙碌的一天，一早起来，总想着找点把事情弄完，可总也弄不完。就这样弄着吧！孩子的事，自己的事都在那里搁置着，不想做，有点欧！今天总体还不错，只是在下午起床时走神了俩小时，也算是给自己的放松吧！今日难得1.儿子乖巧、听话，努力配合，一天下来也是忙忙碌碌，这真的很难得！2.儿子今天录的视频被班主任认可，这真的很难得3.我今天早上做核酸时，自己把教案整了一下，这真的很难得
  • 网络编程基础 记得开心一点啊 网络
    目录♫什么是网络编程♫Socket套接字♪什么是Socket套接字♪数据报套接字♪流套接字♫数据报套接字通信模型♪数据报套接字通讯模型♪DatagramSocket♪DatagramPacket♪实现UDP的服务端代码♪实现UDP的客户端代码♫流套接字通信模型♪流套接字通讯模型♪ServerSocket♪Socket♪实现TCP的服务端代码♪实现TCP的客户端代码♫什么是网络编程网络编程，指网络上
  • 关于Mysql 中 Row size too large (＞ 8126) 错误的解决和理解 秋刀prince mysqlmysql数据库
    提示：啰嗦一嘴，数据库的任何操作和验证前，一定要记得先备份！！！不会有错；文章目录问题发现一、问题导致的可能原因1、页大小2、行格式2.1compact格式2.2Redundant格式2.3Dynamic格式2.4Compressed格式3、BLOB和TEXT列二、解决办法1、修改页大小（不推荐）2、修改行格式3、修改数据类型为BLOB和TEXT列4、其他优化方式（可以参考使用）4.1合理设置数据
  • 多子女家庭问题 3e5c5362403c
    杨宁宁焦点解决网络初17中19坚持分享589天（2021.3.20）本周约练我1次，总计166次，读书打卡第256天案例督导收获：【家有老大篇】被爱与高期待下的独舞家里的第一个孩子往往集万千宠爱于一身。爸爸妈妈、爷爷奶奶、姥姥姥爷的目光都聚焦在他的身上。在这种光环下长大的孩子，就如小皇帝一般，衣来伸手、饭来张口。拥有爱的同时，也意味着拥有了更高的被期待，父母会花血本给你报各种各样的早教班，给你买各
  • 父母教育孩子的方式，将影响孩子一生 树英教育
    为什么有些孩子总是充满自信与快乐？独立、有主见又坚强？而有些孩子却自卑、胆怯，软弱又过度依赖父母？为什么有些孩子总是健康、阳光又富于创造力？而有些孩子却悲观、孤僻又思想空乏？一个孩子的行为取决于孩子的思想，思想取决于环境和自己的认知，认知取决于教育。父母是孩子人生中的第一位教育者，父母养育孩子的方式，将决定他们人生的高度，影响他们的一生。网络图，侵权即删优秀的父母就像园丁，既要浇水施肥，又要修剪杂
  • 2024.9.6 Python，华为笔试题总结，字符串格式化，字符串操作，广度优先搜索解决公司组织绩效互评问题，无向图 RaidenQ python华为leetcode算法力扣广度优先无向图
    1.字符串格式化name="Alice"age=30formatted_string="Name:{},Age:{}".format(name,age)print(formatted_string)或者name="Alice"age=30formatted_string=f"Name:{name},Age:{age}"print(formatted_string)2.网络健康检查第一行有两个整数m
  • 戴容容 中原焦点团队.网络初级第33期,坚持分享第19天 2022年3月9日 TessDai
    《每个人眼中的世界都是不同的》“一千个人眼里有一千个哈姆雷特”世界是多元的,每个人都有自己的道理,人人按照自己的理解去看待这个世界的人和物.我们如此,其他人也是如此.因此,任何事情,我们要放下自己以为的真理,去理解他人认为的真理,只有同频方能共振.孩子在慢慢长大的过程中慢慢学会独立,甚至对抗.尤其当孩子处于青春期的时候,他们开始有很多自己独立的想法,和一些特立独行的做法,家长常常会觉得不可思议,觉
  • 第1步win10宿主机与虚拟机通过NAT共享上网互通 学习3人组 大数据大数据
    VM的CentOS采用NAT共用宿主机网卡宿主机器无法连接到虚拟CentOS要实现宿主机与虚拟机通信，原理就是给宿主机的网卡配置一个与虚拟机网关相同网段的IP地址，实现可以互通。1、查看虚拟机的IP地址2、编辑虚拟机的虚拟网络的NAT和DHCP的配置，设置虚拟机的网卡选择NAT共享模式3、宿主机的IP配置，确保vnet8的IPV4属性与虚拟机在同一网段4、ping测试连通性[root@localh
  • 网络通信流程 记得开心一点啊 服务器网络运维
    目录♫IP地址♫子网掩码♫MAC地址♫相关设备♫ARP寻址♫网络通信流程♫IP地址我们已经知道IP地址由网络号+主机号组成，根据IP地址的不同可以有5钟划分网络号和主机号的方案：其中，各类地址的表示范围是：分类范围适用网络网络数量主机最大连接数A类0.0.0.0~127.255.255.255大型网络12616777214【(2^24)-2】B类128.0.0.0~191.255.255.255中
  • Java爬虫框架（一）--架构设计 狼图腾-狼之传说 java框架java任务html解析器存储电子商务
    一、架构图那里搜网络爬虫框架主要针对电子商务网站进行数据爬取，分析，存储，索引。爬虫：爬虫负责爬取，解析，处理电子商务网站的网页的内容数据库：存储商品信息索引：商品的全文搜索索引Task队列：需要爬取的网页列表Visited表：已经爬取过的网页列表爬虫监控平台：web平台可以启动，停止爬虫，管理爬虫，task队列，visited表。二、爬虫1.流程1)Scheduler启动爬虫器，TaskMast
  • MongoDB知识概括 GeorgeLin98 持久层mongodb
    MongoDB知识概括MongoDB相关概念单机部署基本常用命令索引-IndexSpirngDataMongoDB集成副本集分片集群安全认证MongoDB相关概念业务应用场景：传统的关系型数据库（如MySQL），在数据操作的“三高”需求以及应对Web2.0的网站需求面前，显得力不从心。解释：“三高”需求：①Highperformance-对数据库高并发读写的需求。②HugeStorage-对海量数
  • 计算机木马详细编写思路 小熊同学哦 php开发语言木马木马思路
    导语：计算机木马（ComputerTrojan）是一种恶意软件，通过欺骗用户从而获取系统控制权限，给黑客打开系统后门的一种手段。虽然木马的存在给用户和系统带来严重的安全风险，但是了解它的工作原理与编写思路，对于我们提高防范意识、构建更健壮的网络安全体系具有重要意义。本篇博客将深入剖析计算机木马的详细编写思路，以及如何复杂化挑战，以期提高读者对计算机木马的认识和对抗能力。计算机木马的基本原理计算机木
  • Mongodb Error: queryTxt ETIMEOUT xxxx.wwwdz.mongodb.net 佛一脚 errorreactmongodb数据库
    背景每天都能遇到奇怪的问题，做个记录，以便有缘人能得到帮助！换了一台电脑开发nextjs程序。需要连接mongodb数据，对数据进行增删改查。上一台电脑好好的程序，新电脑死活连不上mongodb数据库。同一套代码，没任何修改，搞得我怀疑人生了，打开浏览器进入mongodb官网毫无问题，也能进入线上系统查看数据，网络应该是没问题。于是我尝试了一下手机热点，这次代码能正常跑起来，连接数据库了！！！是不
  • 高考后该不该给孩子买电脑，什么情况能买？什么情况不能买？ 寻求改变
    我知道家长们很担心，怕买了电脑小孩沉迷游戏，耽误了学业，也不利于身体健康。对于准大学生来说，基本上在18岁左右，也不算小了，但在很多父母眼里，依旧是个小孩子。数据显示，这种情况是有发生的，大学生约70%的电脑主要被用于玩网络游戏，如果没有养成一个用良好的习惯，对孩子影响是非常大的。我总结为三买，三不买。最近有看到群里很多家长再问，小孩上大学该不该给他买电脑，要买和不买两种观点的家长都有，那么哪种情
  • 入门MySQL——查询语法练习 K_un
    前言：前面几篇文章为大家介绍了DML以及DDL语句的使用方法，本篇文章将主要讲述常用的查询语法。其实MySQL官网给出了多个示例数据库供大家实用查询，下面我们以最常用的员工示例数据库为准，详细介绍各自常用的查询语法。1.员工示例数据库导入官方文档员工示例数据库介绍及下载链接：https://dev.mysql.com/doc/employee/en/employees-installation.h
  • ESP32-C3入门教程 网络篇⑩——基于esp_https_ota和MQTT实现开机主动升级和被动触发升级的OTA功能 小康师兄 ESP32-C3入门教程https服务器esp32OTAMQTT
    文章目录一、前言二、软件流程三、部分源码四、运行演示一、前言本文基于VSCodeIDE进行编程、编译、下载、运行等操作基础入门章节请查阅：ESP32-C3入门教程基础篇①——基于VSCode构建HelloWorld教程目录大纲请查阅：ESP32-C3入门教程——导读ESP32-C3入门教程网络篇⑨——基于esp_https_ota实现史上最简单的ESP32OTA远程固件升级功能二、软件流程
  • 多线程编程之存钱与取钱 周凡杨 javathread多线程存钱取钱
      生活费问题是这样的：学生每月都需要生活费，家长一次预存一段时间的生活费，家长和学生使用统一的一个帐号，在学生每次取帐号中一部分钱，直到帐号中没钱时 通知家长存钱，而家长看到帐户还有钱则不存钱，直到帐户没钱时才存钱。   问题分析：首先问题中有三个实体，学生、家长、银行账户，所以设计程序时就要设计三个类。其中银行账户只有一个，学生和家长操作的是同一个银行账户，学生的行为是
  • java中数组与List相互转换的方法 征客丶 JavaScriptjavajsonp
    1.List转换成为数组。（这里的List是实体是ArrayList) 　　调用ArrayList的toArray方法。 　　toArray 　　public T[] toArray(T[] a)返回一个按照正确的顺序包含此列表中所有元素的数组；返回数组的运行时类型就是指定数组的运行时类型。如果列表能放入指定的数组，则返回放入此列表元素的数组。否则，将根据指定数组的运行时类型和此列表的大小分
  • Shell 流程控制 daizj 流程控制if elsewhilecaseshell
    Shell 流程控制 和Java、PHP等语言不一样，sh的流程控制不可为空，如(以下为PHP流程控制写法)： <?php if(isset($_GET["q"])){ search(q);}else{// 不做任何事情} 在sh/bash里可不能这么写，如果else分支没有语句执行，就不要写这个else，就像这样 if else if if 语句语
  • Linux服务器新手操作之二 周凡杨 Linux 简单 操作
    1.利用关键字搜寻Man Pages    man -k keyword  其中-k 是选项，keyword是要搜寻的关键字 如果现在想使用whoami命令，但是只记住了前3个字符who，就可以使用 man -k who来搜寻关键字who的man命令       [haself@HA5-DZ26 ~]$ man -k
  • socket聊天室之服务器搭建 朱辉辉33 socket
    因为我们做的是聊天室，所以会有多个客户端，每个客户端我们用一个线程去实现，通过搭建一个服务器来实现从每个客户端来读取信息和发送信息。    我们先写客户端的线程。 public class ChatSocket extends Thread{ Socket socket; public ChatSocket(Socket socket){ this.sock
  • 利用finereport建设保险公司决策分析系统的思路和方法 老A不折腾 finereport金融保险分析系统报表系统项目开发
    决策分析系统呈现的是数据页面，也就是俗称的报表，报表与报表间、数据与数据间都按照一定的逻辑设定，是业务人员查看、分析数据的平台，更是辅助领导们运营决策的平台。底层数据决定上层分析，所以建设决策分析系统一般包括数据层处理（数据仓库建设）。   项目背景介绍 通常，保险公司信息化程度很高，基本上都有业务处理系统（像集团业务处理系统、老业务处理系统、个人代理人系统等）、数据服务系统（通过
  • 始终要页面在ifream的最顶层 林鹤霄
    index.jsp中有ifream，但是session消失后要让login.jsp始终显示到ifream的最顶层。。。始终没搞定，后来反复琢磨之后，得到了解决办法，在这儿给大家分享下。。 index.jsp--->主要是加了颜色的那一句 <html> <iframe name="top" ></iframe> <ifram
  • MySQL binlog恢复数据 aigo mysql
    1，先确保my.ini已经配置了binlog：   # binlog log_bin = D:/mysql-5.6.21-winx64/log/binlog/mysql-bin.log log_bin_index = D:/mysql-5.6.21-winx64/log/binlog/mysql-bin.index log_error = D:/mysql-5.6.21-win
  • OCX打成CBA包并实现自动安装与自动升级 alxw4616 ocxcab
    近来手上有个项目,需要使用ocx控件 (ocx是什么? http://baike.baidu.com/view/393671.htm) 在生产过程中我遇到了如下问题. 1. 如何让 ocx 自动安装?     a) 如何签名?     b) 如何打包?     c) 如何安装到指定目录? 2.
  • Hashmap队列和PriorityQueue队列的应用 百合不是茶 Hashmap队列PriorityQueue队列
      HashMap队列已经是学过了的,但是最近在用的时候不是很熟悉,刚刚重新看以一次,   HashMap是K,v键 ,值     put()添加元素      //下面试HashMap去掉重复的 package com.hashMapandPriorityQueue; import java.util.H
  • JDK1.5 returnvalue实例 bijian1013 javathreadjava多线程returnvalue
    Callable接口： 返回结果并且可能抛出异常的任务。实现者定义了一个不带任何参数的叫做 call 的方法。 Callable 接口类似于 Runnable，两者都是为那些其实例可能被另一个线程执行的类设计的。但是 Runnable 不会返回结果，并且无法抛出经过检查的异常。        ExecutorService接口方
  • angularjs指令中动态编译的方法(适用于有异步请求的情况) 内嵌指令无效 bijian1013 JavaScriptAngularJS
            在directive的link中有一个$http请求，当请求完成后根据返回的值动态做element.append('......');这个操作，能显示没问题，可问题是我动态组的HTML里面有ng-click，发现显示出来的内容根本不执行ng-click绑定的方法！     
  • 【Java范型二】Java范型详解之extend限定范型参数的类型 bit1129 extend
    在第一篇中，定义范型类时，使用如下的方式：   public class Generics<M, S, N> { //M,S,N是范型参数 }  这种方式定义的范型类有两个基本的问题：   1. 范型参数定义的实例字段，如private M m = null;由于M的类型在运行时才能确定，那么我们在类的方法中，无法使用m，这跟定义pri
  • 【HBase十三】HBase知识点总结 bit1129 hbase
    1. 数据从MemStore flush到磁盘的触发条件有哪些？    a.显式调用flush，比如flush 'mytable'    b.MemStore中的数据容量超过flush的指定容量，hbase.hregion.memstore.flush.size,默认值是64M 2. Region的构成是怎么样？ 1个Region由若干个Store组成
  • 服务器被DDOS攻击防御的SHELL脚本 ronin47
    mkdir /root/bin vi /root/bin/dropip.sh #!/bin/bash/bin/netstat -na|grep ESTABLISHED|awk ‘{print $5}’|awk -F:‘{print $1}’|sort|uniq -c|sort -rn|head -10|grep -v -E ’192.168|127.0′|awk ‘{if($2!=null&a
  • java程序员生存手册-craps 游戏-一个简单的游戏 bylijinnan java
    import java.util.Random; public class CrapsGame { /** * *一个简单的赌*博游戏，游戏规则如下： *玩家掷两个骰子，点数为1到6，如果第一次点数和为7或11，则玩家胜， *如果点数和为2、3或12，则玩家输， *如果和为其它点数，则记录第一次的点数和，然后继续掷骰，直至点数和等于第一次掷出的点
  • TOMCAT启动提示NB: JAVA_HOME should point to a JDK not a JRE解决 开窍的石头 JAVA_HOME
    当tomcat是解压的时候，用eclipse启动正常，点击startup.bat的时候启动报错; 报错如下：   The JAVA_HOME environment variable is not defined correctly This environment variable is needed to run this program NB: JAVA_HOME shou
  • [操作系统内核]操作系统与互联网 comsci 操作系统
         我首先申明：我这里所说的问题并不是针对哪个厂商的，仅仅是描述我对操作系统技术的一些看法       操作系统是一种与硬件层关系非常密切的系统软件，按理说，这种系统软件应该是由设计CPU和硬件板卡的厂商开发的，和软件公司没有直接的关系，也就是说，操作系统应该由做硬件的厂商来设计和开发
  • 富文本框ckeditor_4.4.7 文本框的简单使用 支持IE11 cuityang 富文本框
    <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>知识库内容编辑</tit
  • Property null not found darrenzhu datagridFlexAdvancedpropery null
    When you got error message like "Property null not found ***", try to fix it by the following way: 1)if you are using AdvancedDatagrid, make sure you only update the data in the data prov
  • MySQl数据库字符串替换函数使用 dcj3sjt126com mysql函数替换
    需求：需要将数据表中一个字段的值里面的所有的  .   替换成  _   原来的数据是  site.title  site.keywords  .... 替换后要为     site_title  site_keywords   使用的SQL语句如下：   updat
  • mac上终端起动MySQL的方法 dcj3sjt126com mysqlmac
    首先去官网下载: http://www.mysql.com/downloads/ 我下载了5.6.11的dmg然后安装,安装完成之后..如果要用终端去玩SQL.那么一开始要输入很长的:/usr/local/mysql/bin/mysql 这不方便啊,好想像windows下的cmd里面一样输入mysql -uroot -p1这样...上网查了下..可以实现滴. 打开终端,输入: 1
  • Gson使用一（Gson） eksliang jsongson
    转载请出自出处：http://eksliang.iteye.com/blog/2175401 一.概述 从结构上看Json，所有的数据（data）最终都可以分解成三种类型： 第一种类型是标量（scalar），也就是一个单独的字符串（string）或数字（numbers），比如"ickes"这个字符串。 第二种类型是序列（sequence），又叫做数组（array）
  • android点滴4 gundumw100 android
    Android 47个小知识 http://www.open-open.com/lib/view/open1422676091314.html Android实用代码七段（一） http://www.cnblogs.com/over140/archive/2012/09/26/2611999.html http://www.cnblogs.com/over140/arch
  • JavaWeb之JSP基本语法 ihuning javaweb
      目录   JSP模版元素  JSP表达式  JSP脚本片断  EL表达式  JSP注释  特殊字符序列的转义处理  如何查找JSP页面中的错误   JSP模版元素    JSP页面中的静态HTML内容称之为JSP模版元素，在静态的HTML内容之中可以嵌套JSP
  • App Extension编程指南（iOS8/OS X v10.10）中文版 啸笑天 ext
             当iOS 8.0和OS X v10.10发布后，一个全新的概念出现在我们眼前，那就是应用扩展。顾名思义，应用扩展允许开发者扩展应用的自定义功能和内容，能够让用户在使用其他app时使用该项功能。你可以开发一个应用扩展来执行某些特定的任务，用户使用该扩展后就可以在多个上下文环境中执行该任务。比如说，你提供了一个能让用户把内容分
  • SQLServer实现无限级树结构 macroli oraclesqlSQL Server
    表结构如下： 数据库id path titlesort 排序 1 0 首页 0 2 0,1 新闻 1 3 0,2 JAVA 2 4 0,3 JSP 3 5 0,2,3 业界动态 2 6 0,2,3 国内新闻 1 创建一个存储过程来实现，如果要在页面上使用可以设置一个返回变量将至传过去   create procedure test as begin decla
  • Css居中div，Css居中img，Css居中文本，Css垂直居中div qiaolevip 众观千象学习永无止境每天进步一点点css
    /**********Css居中Div**********/ div.center { width: 100px; margin: 0 auto; } /**********Css居中img**********/ img.center { display: block; margin-left: auto; margin-right: auto; }
  • Oracle 常用操作(实用) 吃猫的鱼 oracle
    SQL>select text from all_source where owner=user and name=upper('&plsql_name');  SQL>select * from user_ind_columns where index_name=upper('&index_name');  将表记录恢复到指定时间段以前
  • iOS中使用RSA对数据进行加密解密 witcheryne iosrsaiPhoneobjective c
      RSA算法是一种非对称加密算法,常被用于加密数据传输.如果配合上数字摘要算法, 也可以用于文件签名. 本文将讨论如何在iOS中使用RSA传输加密数据. 本文环境 mac os  openssl-1.0.1j, openssl需要使用1.x版本, 推荐使用[homebrew](http://brew.sh/)安装. Java 8 RSA基本原理 RS
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他