初始化环境
最小化安装操作系统，官方建议版本为 CentOS 7.3 及以上，这里的版本为：
[root@localhost ~]# cat /etc/redhat-release
CentOS Linux release 7.8.2003 (Core)
[root@localhost ~]# uname -r
3.10.0-1127.el7.x86_64内存至少为4G，否认有可能会出现集群启动失败的情况。
使用以下脚本初始化环境：
[root@localhost ~]# vi tidb-init.sh
#!/bin/bash
# 关闭防火墙
echo "=========stop firewalld============="
systemctl stop firewalld
systemctl disable firewalld
systemctl status firewalld
# 关闭NetworkManager
echo "=========stop NetworkManager ============="
systemctl stop NetworkManager
systemctl disable NetworkManager
systemctl status NetworkManager
# 关闭selinux
echo "=========disable selinux============="
sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
setenforce 0
getenforce
# 关闭swap
echo "=========close swap============="
sed -ri 's/.*swap.*/#&/' /etc/fstab
swapoff -a
free -m
# 时间同步
echo "=========sync time============="
yum install chrony -y
cat >> /etc/chrony.conf << EOF
server ntp.aliyun.com iburst
EOF
systemctl start chronyd
systemctl enable chronyd
chronyc sources
#配置yum
echo "=========config yum============="
yum install wget net-tools telnet tree nmap sysstat lrzsz dos2unix -y
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
yum clean all
yum makecache
[root@localhost ~]# sh tidb-init.sh配置网络：
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="96350fad-1ffc-4410-a068-5d13244affb7"
DEVICE="ens33"
ONBOOT="yes"
IPADDR=192.168.44.134
NETMASK=255.255.255.0
GATEWAY=192.168.44.2
DNS1=192.168.44.2
[root@localhost ~]# /etc/init.d/network restart修改主机名：
[root@localhost ~]# hostnamectl set-hostname tidbtest01
[root@tidbtest01 ~]# echo "192.168.44.134 tidbtest01" >> /etc/hosts集群拓扑
最小规模的 TiDB 集群拓扑：
| 实例 | 个数 | IP | 配置 |
|---|---|---|---|
| TiKV | 3 | 192.168.44.134 192.168.44.134 192.168.44.134 | 避免端口和目录冲突 |
| TiDB | 1 | 192.168.44.134 | 默认端口 全局目录配置 |
| PD | 1 | 192.168.44.134 | 默认端口 全局目录配置 |
| TiFlash | 1 | 192.168.44.134 | 默认端口 全局目录配置 |
| Monitor | 1 | 192.168.44.134 | 默认端口 全局目录配置 |
实施部署
- 下载并安装 TiUP
[root@tidbtest01 ~]# curl --proto '=https' --tlsv1.2 -sSf https://tiup-mirrors.pingcap.com/install.sh | sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 8697k 100 8697k 0 0 4637k 0 0:00:01 0:00:01 --:--:-- 4636k
WARN: adding root certificate via internet: https://tiup-mirrors.pingcap.com/root.json
You can revoke this by remove /root/.tiup/bin/7b8e153f2e2d0928.root.json
Set mirror to https://tiup-mirrors.pingcap.com success
Detected shell: bash
Shell profile: /root/.bash_profile
/root/.bash_profile has been modified to add tiup to PATH
open a new terminal or source /root/.bash_profile to use it
Installed path: /root/.tiup/bin/tiup
===============================================
Have a try: tiup playground
===============================================
[root@tidbtest01 ~]# source /root/.bash_profile- 安装 TiUP 的 cluster 组件
[root@tidbtest01 ~]# tiup cluster
The component `cluster` is not installed; downloading from repository.
download https://tiup-mirrors.pingcap.com/cluster-v1.3.2-linux-amd64.tar.gz 10.05 MiB / 10.05 MiB 100.00% 9.91 MiB p/s
Starting component `cluster`: /root/.tiup/components/cluster/v1.3.2/tiup-cluster
Deploy a TiDB cluster for production
Usage:
tiup cluster [command]
Available Commands:
check Perform preflight checks for the cluster.
deploy Deploy a cluster for production
start Start a TiDB cluster
stop Stop a TiDB cluster
restart Restart a TiDB cluster
scale-in Scale in a TiDB cluster
scale-out Scale out a TiDB cluster
destroy Destroy a specified cluster
clean (EXPERIMENTAL) Cleanup a specified cluster
upgrade Upgrade a specified TiDB cluster
exec Run shell command on host in the tidb cluster
display Display information of a TiDB cluster
prune Destroy and remove instances that is in tombstone state
list List all clusters
audit Show audit log of cluster operation
import Import an exist TiDB cluster from TiDB-Ansible
edit-config Edit TiDB cluster config.
Will use editor from environment variable `EDITOR`, default use vi
reload Reload a TiDB cluster's config and restart if needed
patch Replace the remote package with a specified package and restart the service
rename Rename the cluster
enable Enable a TiDB cluster automatically at boot
disable Disable starting a TiDB cluster automatically at boot
help Help about any command
Flags:
-h, --help help for tiup
--ssh string (EXPERIMENTAL) The executor type: 'builtin', 'system', 'none'.
--ssh-timeout uint Timeout in seconds to connect host via SSH, ignored for operations that don't need an SSH connection. (default 5)
-v, --version version for tiup
--wait-timeout uint Timeout in seconds to wait for an operation to complete, ignored for operations that don't fit. (default 120)
-y, --yes Skip all confirmations and assumes 'yes'
Use "tiup cluster help [command]" for more information about a command.- 调大 sshd 服务的连接数限制
[root@tidbtest01 ~]# vi /etc/ssh/sshd_config
MaxSessions 20
[root@tidbtest01 ~]# service sshd restart- 创建配置文件
[root@tidbtest01 ~]# vi topo.yaml
# # Global variables are applied to all deployments and used as the default value of
# # the deployments if a specific deployment value is missing.
global:
user: "tidb"
ssh_port: 22
deploy_dir: "/tidb-deploy"
data_dir: "/tidb-data"
# # Monitored variables are applied to all the machines.
monitored:
node_exporter_port: 9100
blackbox_exporter_port: 9115
server_configs:
tidb:
log.slow-threshold: 300
tikv:
readpool.storage.use-unified-pool: false
readpool.coprocessor.use-unified-pool: true
pd:
replication.enable-placement-rules: true
replication.location-labels: ["host"]
tiflash:
logger.level: "info"
pd_servers:
- host: 192.168.44.134
tidb_servers:
- host: 192.168.44.134
tikv_servers:
- host: 192.168.44.134
port: 20160
status_port: 20180
config:
server.labels: { host: "logic-host-1" }
- host: 192.168.44.134
port: 20161
status_port: 20181
config:
server.labels: { host: "logic-host-2" }
- host: 192.168.44.134
port: 20162
status_port: 20182
config:
server.labels: { host: "logic-host-3" }
tiflash_servers:
- host: 192.168.44.134
monitoring_servers:
- host: 192.168.44.134
grafana_servers:
- host: 192.168.44.134- 查看可用版本
通过
tiup list tidb命令来查看当前支持部署的 TiDB 版本
[root@tidbtest01 ~]# tiup list tidb- 部署集群
命令为：
tiup cluster deploy ./topo.yaml --user root -p - 参数
cluster-name表示设置集群名称 - 参数
tidb-version表示设置集群版本
[root@tidbtest01 ~]# tiup cluster deploy tidb-cluster v4.0.10 ./topo.yaml --user root -p
Starting component `cluster`: /root/.tiup/components/cluster/v1.3.2/tiup-cluster deploy tidb-cluster v4.0.10 ./topo.yaml --user root -p
Please confirm your topology:
Cluster type: tidb
Cluster name: tidb-cluster
Cluster version: v4.0.10
Type Host Ports OS/Arch Directories
---- ---- ----- ------- -----------
pd 192.168.44.134 2379/2380 linux/x86_64 /tidb-deploy/pd-2379,/tidb-data/pd-2379
tikv 192.168.44.134 20160/20180 linux/x86_64 /tidb-deploy/tikv-20160,/tidb-data/tikv-20160
tikv 192.168.44.134 20161/20181 linux/x86_64 /tidb-deploy/tikv-20161,/tidb-data/tikv-20161
tikv 192.168.44.134 20162/20182 linux/x86_64 /tidb-deploy/tikv-20162,/tidb-data/tikv-20162
tidb 192.168.44.134 4000/10080 linux/x86_64 /tidb-deploy/tidb-4000
tiflash 192.168.44.134 9000/8123/3930/20170/20292/8234 linux/x86_64 /tidb-deploy/tiflash-9000,/tidb-data/tiflash-9000
prometheus 192.168.44.134 9090 linux/x86_64 /tidb-deploy/prometheus-9090,/tidb-data/prometheus-9090
grafana 192.168.44.134 3000 linux/x86_64 /tidb-deploy/grafana-3000
Attention:
1. If the topology is not what you expected, check your yaml file.
2. Please confirm there is no port/directory conflicts in same host.
Do you want to continue? [y/N]: y
Input SSH password: 这里输入root密码
+ Generate SSH keys ... Done
+ Download TiDB components
- Download pd:v4.0.10 (linux/amd64) ... Done
- Download tikv:v4.0.10 (linux/amd64) ... Done
- Download tidb:v4.0.10 (linux/amd64) ... Done
- Download tiflash:v4.0.10 (linux/amd64) ... Done
- Download prometheus:v4.0.10 (linux/amd64) ... Done
- Download grafana:v4.0.10 (linux/amd64) ... Done
- Download node_exporter:v0.17.0 (linux/amd64) ... Done
- Download blackbox_exporter:v0.12.0 (linux/amd64) ... Done
+ Initialize target host environments
- Prepare 192.168.44.134:22 ... Done
+ Copy files
- Copy pd -> 192.168.44.134 ... Done
- Copy tikv -> 192.168.44.134 ... Done
- Copy tikv -> 192.168.44.134 ... Done
- Copy tikv -> 192.168.44.134 ... Done
- Copy tidb -> 192.168.44.134 ... Done
- Copy tiflash -> 192.168.44.134 ... Done
- Copy prometheus -> 192.168.44.134 ... Done
- Copy grafana -> 192.168.44.134 ... Done
- Copy node_exporter -> 192.168.44.134 ... Done
- Copy blackbox_exporter -> 192.168.44.134 ... Done
+ Check status
Enabling component pd
Enabling instance pd 192.168.44.134:2379
Enable pd 192.168.44.134:2379 success
Enabling component node_exporter
Enabling component blackbox_exporter
Enabling component tikv
Enabling instance tikv 192.168.44.134:20162
Enabling instance tikv 192.168.44.134:20160
Enabling instance tikv 192.168.44.134:20161
Enable tikv 192.168.44.134:20162 success
Enable tikv 192.168.44.134:20161 success
Enable tikv 192.168.44.134:20160 success
Enabling component tidb
Enabling instance tidb 192.168.44.134:4000
Enable tidb 192.168.44.134:4000 success
Enabling component tiflash
Enabling instance tiflash 192.168.44.134:9000
Enable tiflash 192.168.44.134:9000 success
Enabling component prometheus
Enabling instance prometheus 192.168.44.134:9090
Enable prometheus 192.168.44.134:9090 success
Enabling component grafana
Enabling instance grafana 192.168.44.134:3000
Enable grafana 192.168.44.134:3000 success
Cluster `tidb-cluster` deployed successfully, you can start it with command: `tiup cluster start tidb-cluster`- 启动集群
[root@tidbtest01 ~]# tiup cluster start tidb-cluster
Starting component `cluster`: /root/.tiup/components/cluster/v1.3.2/tiup-cluster start tidb-cluster
Starting cluster tidb-cluster...
+ [ Serial ] - SSHKeySet: privateKey=/root/.tiup/storage/cluster/clusters/tidb-cluster/ssh/id_rsa, publicKey=/root/.tiup/storage/cluster/clusters/tidb-cluster/ssh/id_rsa.pub
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [Parallel] - UserSSH: user=tidb, host=192.168.44.134
+ [ Serial ] - StartCluster
Starting component pd
Starting instance pd 192.168.44.134:2379
Start pd 192.168.44.134:2379 success
Starting component node_exporter
Starting instance 192.168.44.134
Start 192.168.44.134 success
Starting component blackbox_exporter
Starting instance 192.168.44.134
Start 192.168.44.134 success
Starting component tikv
Starting instance tikv 192.168.44.134:20162
Starting instance tikv 192.168.44.134:20160
Starting instance tikv 192.168.44.134:20161
Start tikv 192.168.44.134:20162 success
Start tikv 192.168.44.134:20161 success
Start tikv 192.168.44.134:20160 success
Starting component tidb
Starting instance tidb 192.168.44.134:4000
Start tidb 192.168.44.134:4000 success
Starting component tiflash
Starting instance tiflash 192.168.44.134:9000
Start tiflash 192.168.44.134:9000 success
Starting component prometheus
Starting instance prometheus 192.168.44.134:9090
Start prometheus 192.168.44.134:9090 success
Starting component grafana
Starting instance grafana 192.168.44.134:3000
Start grafana 192.168.44.134:3000 success
+ [ Serial ] - UpdateTopology: cluster=tidb-cluster
Started cluster `tidb-cluster` successfully访问集群
- 安装MySQL客户端
[root@tidbtest01 ~]# yum -y install mysql- 访问TiDB，密码为空
[root@tidbtest01 ~]# mysql -h 192.168.44.134 -P 4000 -u root
Welcome to the MariaDB monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.7.25-TiDB-v4.0.10 TiDB Server (Apache License 2.0) Community Edition, MySQL 5.7 compatible
Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
MySQL [(none)]> show databases;
+--------------------+
| Database |
+--------------------+
| INFORMATION_SCHEMA |
| METRICS_SCHEMA |
| PERFORMANCE_SCHEMA |
| mysql |
| test |
+--------------------+
5 rows in set (0.00 sec)
MySQL [(none)]> select tidb_version()\G
*************************** 1. row ***************************
tidb_version(): Release Version: v4.0.10
Edition: Community
Git Commit Hash: dbade8cda4c5a329037746e171449e0a1dfdb8b3
Git Branch: heads/refs/tags/v4.0.10
UTC Build Time: 2021-01-15 02:59:27
GoVersion: go1.13
Race Enabled: false
TiKV Min Version: v3.0.0-60965b006877ca7234adaced7890d7b029ed1306
Check Table Before Drop: false
1 row in set (0.00 sec)- 查看已经部署的集群列表
[root@tidbtest01 ~]# tiup cluster list
Starting component `cluster`: /root/.tiup/components/cluster/v1.3.2/tiup-cluster list
Name User Version Path PrivateKey
---- ---- ------- ---- ----------
tidb-cluster tidb v4.0.10 /root/.tiup/storage/cluster/clusters/tidb-cluster /root/.tiup/storage/cluster/clusters/tidb-cluster/ssh/id_rsa- 查看集群的拓扑结构和状态
[root@tidbtest01 ~]# tiup cluster display tidb-cluster
Starting component `cluster`: /root/.tiup/components/cluster/v1.3.2/tiup-cluster display tidb-cluster
Cluster type: tidb
Cluster name: tidb-cluster
Cluster version: v4.0.10
SSH type: builtin
Dashboard URL: http://192.168.44.134:2379/dashboard
ID Role Host Ports OS/Arch Status Data Dir Deploy Dir
-- ---- ---- ----- ------- ------ -------- ----------
192.168.44.134:3000 grafana 192.168.44.134 3000 linux/x86_64 Up - /tidb-deploy/grafana-3000
192.168.44.134:2379 pd 192.168.44.134 2379/2380 linux/x86_64 Up|L|UI /tidb-data/pd-2379 /tidb-deploy/pd-2379
192.168.44.134:9090 prometheus 192.168.44.134 9090 linux/x86_64 Up /tidb-data/prometheus-9090 /tidb-deploy/prometheus-9090
192.168.44.134:4000 tidb 192.168.44.134 4000/10080 linux/x86_64 Up - /tidb-deploy/tidb-4000
192.168.44.134:9000 tiflash 192.168.44.134 9000/8123/3930/20170/20292/8234 linux/x86_64 Up /tidb-data/tiflash-9000 /tidb-deploy/tiflash-9000
192.168.44.134:20160 tikv 192.168.44.134 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.44.134:20161 tikv 192.168.44.134 20161/20181 linux/x86_64 Up /tidb-data/tikv-20161 /tidb-deploy/tikv-20161
192.168.44.134:20162 tikv 192.168.44.134 20162/20182 linux/x86_64 Up /tidb-data/tikv-20162 /tidb-deploy/tikv-20162
Total nodes: 8- 访问Dashboard
通过上面输出的Dashboard URL:http://192.168.44.134:2379/dashboard访问集群控制台页面，默认用户名为 root，密码为空。
- 访问 TiDB 的 Grafana 监控
通过上面输出的grafana的Host和Ports访问集群 Grafana 监控页面，默认用户名和密码均为 admin。
欢迎关注我的公众号，一起学习。
