对网卡中断绑定的脚本

 1 service irqbalance stop

 2 

 3 #@irqnum:网卡eth2的中断数

 4 #@cpunum:CPU数目

 5 irqnum=`cat /proc/interrupts | grep eth2.*- | awk -F : '{print $1}' | awk '{print $1}'`

 6 cpunum=`cat /proc/cpuinfo | grep processor | wc -l`

 7 param=1

 8 count=0

 9 

10 for n in $irqnum

11 do

12         value=`printf "%08x" $param`   //转化为16进制

13         awk -F , -v a=$value 'BEGIN{OFS=","}{$NF="";print $0 a}' /proc/irq/$n/smp_affinity > /proc/irq/$n/smp_affinity

14         param=`expr $param \* 2`

15         count=`expr $count + 1`

16         if [ $count -eq $cpunum ];then  

17                 count=0

18                 param=1

19         fi

20         echo `cat /proc/irq/$n/smp_affinity`

21 done

 

1.irqbalance 的介绍

irqbalance 用于优化中断分配,它会自动收集系统数据以分析使用模式,并依据系统负载状况将工作状态置于 Performance mode 或 Power-save mode.处于 Performance mode时irqbalance 会将中断尽可能均匀地分发给各个CPU以充分利用 CPU 多核,提升性能.处于 Power-save mode时,irqbalance 会将中断集中分配给第一个 CPU,以保证其它空闲 CPU 的睡眠时间,降低能耗

 

2.AWK中OFS : The Output Field Separator Variable

 

There is an important difference between

 

print $2 $3

 

and

 

print $2, $3

 

The first example prints out one field, and the second prints out two fields. In the first case, the two positional parameters are concatenated together and output without a space. In the second case, AWK prints two fields, and places the output field separator between them. Normally this is a space, but you can change this by modifying the variable "OFS".

 

3. AWK中 Basic Structure

 

The essential organization of an AWK program follows the form:

 

pattern { action }

 

The pattern specifies when the action is performed. Like most UNIX utilities, AWK is line oriented. That is, the pattern specifies a test that is performed with each line read as input. If the condition is true, then the action is taken. The default pattern is something that matches every line. This is the blank or null pattern. Two other important patterns are specified by the keywords "BEGIN" and "END". As you might expect, these two words specify actions to be taken before any lines are read, and after the last line is read. The AWK program below:

 

BEGIN { print "START" }
      { print        }
END  { print "STOP"  }
 

adds one line before and one line after the input file. This isn't very useful, but with a simple change, we can make this into a typical AWK program:

 

BEGIN { print "File\tOwner"}

{ print $8, "\t", $3}

END { print " - DONE -" }

 

4. AWK中 NF - The Number of Fields Variable  

1.It is useful to know how many fields are on a line.  

2.Don't forget the variable can be prepended with a "$". This allows you to print the last field of any column

 

 

问题：

1.为什么要将中断绑定到固定CPU

In order to achieve the best performance, it is recommended that all the interruptions generated by a device
queue is handled by the same CPU, instead of IRQ balancing. Although it is not expected, round robin IRQ
distribution is not good for performance because when the interruption go to another fresh CPU, the new CPU
probably will not have the interrupt handler function in the cache, and a long time will be required to get the
properly interrupt handler from the main memory and run it. On the other hand, if the same CPU handles the
same IRQ almost all the time, the IRQ handler function will unlikely leave the CPU cache, boosting the kernel
performance。

 

参考：

http://www.grymoire.com/Unix/Awk.html#uh-17  

http://www.gnu.org/software/gawk/manual/gawk.html  

http://blog.netzhou.net/?p=181  

http://blog.csdn.net/wyaibyn/article/details/14109325  

http://www.thegeekstuff.com/2014/01/linux-interrupts/  

https://wiki.chipp.ch/twiki/pub/CmsTier3/NodeTypeFileServerHPDL380G7/ols2009-pages-169-1842.pdf