Legato Single Server Sertup--For RMAN

After Setup Legato Single Server, you can use "inquire" to query devices, and then use "jbconfig" to install them.

C:\PROGRA~1\nsr\bin>inquire
[email protected]:LG      CD-ROM CRD-8482B1.05|CD-ROM
[email protected]:MEGARAID LD 0 RAID 1    1.01|Disk, \\.\PHYSICALDRIVE0
[email protected]:MEGARAID LD 1 RAID 5    1.01|Disk, \\.\PHYSICALDRIVE1
[email protected]:DELL    PERC 2/DC       1.01|Processor
[email protected]:Dell                        |Processor
[email protected]:FUJITSU MAJ3182MC       5509|Disk
[email protected]:DELL    1x8 U2W SCSI BP 5.43|Processor
[email protected]:HP      C5713A          H107|Tape, \\.\Tape0
[email protected]:HP      C5713A          H107|Autochanger (Jukebox), \\.\Changer0

C:\PROGRA~1\nsr\bin>jbconfig
         1) Install a SmartMedia Jukebox.
         2) Install an Autodetected SCSI Jukebox.
         3) Install an Autodetected NDMP SCSI Jukebox.
         4) Install an SJI Jukebox.
         5) Install an STL Silo.
         6) Install a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you installing? [1] 2
These are the SCSI Jukeboxes currently attached to your system:
  1) [email protected]: HP C5713A
Which one do you want to install? 1
Installing an 'HP C5713A' jukebox.
Name you would like to assign to the jukebox device? HPC5713A
A brief description of the jukebox device? [[email protected]: HP C5713A]
Pathname of the control port for the jukebox device? [[email protected]]
Do you want automated device cleaning support enabled? (yes/no) yes

Will media drive 1 be shared by multiple device paths? (yes/no) yes

   Since this drive will be shared, you will be asked for a hardware id,
   which uniquely identifies the drive.  Each device path that shares the
   drive will be given the same hardware id value.  When a device has a
   hardware id value, its messages will contain a number that uniquely
   represents the hardware id.  This number is visible in administrator
   programs, such as nwadmin.

Enter hardware id for media drive 1: ? [HPC5713A drive-1] HP5713A1
You've entered 'HP5713A1'. Continue with this hardware id? (yes/no) yes
Enter hostname that owns device path 1 for media drive 1: ? [svrtest2.nwxy.com]

Enter pathname of device 1 for media drive 1: ? [\\.\Tape0]
using '\\.\Tape0' as device name
Should the drive be configured as a NDMP device? (yes/no) no
This media device has not been configured yet.  Please
select a media device type for \\.\Tape0.
         1) 3480                        23) dst (NT)
         2) 3570                        24) dtf
         3) 3590                        25) file
         4) 4890                        26) filesys
         5) 4mm                         27) himt
         6) 4mm 12GB                    28) logical
         7) 4mm 20GB                    29) LTO Ultrium
         8) 4mm 4GB                     30) optical
         9) 4mm 8GB                     31) qic
        10) 8mm                         32) SD3
        11) 8mm 20GB                    33) sdlt
        12) 8mm 5GB                     34) SLR
        13) 8mm AIT                     35) tkz90
        14) 8mm AIT-2                   36) travan10
        15) 8mm Mammoth-2               37) tz85
        16) 9490                        38) tz86
        17) 9840                        39) tz87
        18) 9940                        40) tz88
        19) dlt                         41) tz89
        20) dlt1                        42) tzs20
        21) dlt7000                     43) VXA
        22) dlt8000
Choice? 5

Any more device paths for media drive 1? (yes/no)
Your jukebox has a bar code reader.
Do you want bar code reader support enabled? (yes/no) no

Following are attributes that define cleaning cartridge support
for the jukebox `HPC5713A':
        auto clean: Yes
        default cleanings: 25
        cleaning slots: 6
                Cleaning cartridge volumes      Slot number
                --------------------------      -----------
                Cleaning Tape (25 uses left)    6

Make sure that the slots set aside for cleaning cartridges
contain cleaning cartridges. Networker must know the number
of times it can use each cleaning cartridge. You can
control how many times Networker will use each cleaning
cartridge by using the command -
nsrjb -U (number of uses) -S (slot number)
For more details please refer to nsrjb man pages.

Following are attributes that define the cleaning
schedule for each device in the jukebox.

        name: \\.\Tape0
                date last cleaned:
                cleaning interval: 2 weeks
                cleaning required: No

Verify that the values for these attributes are appropriate
for your installation. If not check documentation on how to
set up automated cleaning cartridge support.

Jukebox has been added successfully

Would you like to configure another jukebox? (yes/no) no

After Configured , you can use RMAN to test the database backup.

C:\>rman target sys/oracle@ev_old catalog rman/rman@rmandb
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation.  All rights reserved.
connected to target database: ORATEST (DBID=3155607277)
connected to recovery catalog database

RMAN> run {
2> allocate channel x1 type 'SBT_TAPE';
3> backup tablespace tools;
4> release channel x1;
5> }

allocated channel: x1
channel x1: sid=34 devtype=SBT_TAPE
channel x1: NMO v3.5.0.1

Starting backup at 12-JUN-07
channel x1: starting full datafile backupset
channel x1: specifying datafile(s) in backupset
input datafile fno=00004 name=Y:\ORACLE\ORADATA\ORATEST\TOOLS01.DBF
channel x1: starting piece 1 at 12-JUN-07
channel x1: finished piece 1 at 12-JUN-07
piece handle=0bik3j0e_1_1 comment=API Version 2.0,MMS Version 3.5.0.1
channel x1: backup set complete, elapsed time: 00:19:25
Finished backup at 12-JUN-07

released channel: x1
RMAN>