地图分幅算法实现

关于地图分幅算法的AE实现,下面是C#代码~
 public enum ScaleMark { A, B, C, D, E, F, G, H };//不同比例尺的号码
        private int m_1s1000000_row;//1:100万图幅行
        private int m_1s1000000_list;//1:100万图幅列
        private int m_assign_row;//指定比例尺图幅行
        private int m_assign_list;//指定比例尺图幅列
        private int m_scale;//指定比例尺;

        private FrmGeocodingExport pFGE;
        private esriUnits m_CurMapUnits;


 

        #region 图幅号计算函数
        private IEnvelope FromGeocodingDawn()
        {

            //计算要素的值
            int h = this.m_1s1000000_row ;//1:100万行号
            int l = this.m_1s1000000_list ;//1:100万列号

            ScaleMark ScaleMark_1s1000000 = new ScaleMark();
            IPoint scaleDelta_1s1000000 = new PointClass();
            ScaleMark_1s1000000 = 0;
            this.initialScaleMark(ScaleMark_1s1000000, scaleDelta_1s1000000);

            double delta_x = scaleDelta_1s1000000.X;//1:100万经差(度)
            double delta_y = scaleDelta_1s1000000.Y;//1:100万纬差(度)

            ScaleMark pScaleMark = new ScaleMark();
            IPoint scaleDelta = new PointClass();
            pScaleMark = (ScaleMark )m_scale ;
            this.initialScaleMark(pScaleMark , scaleDelta);

            double delta_xp = scaleDelta.X;//1:10万经差(度)
            double delta_yp = scaleDelta.Y;//1:10万纬差(度)

            int hp = m_assign_row;
            int lp = m_assign_list;

            IEnvelope pEnvelope = new EnvelopeClass();

            if (m_assign_list != 0 && m_assign_row != 0)
            {
                //进行指定图幅号左上角点经纬度计算
                double ymax = h * delta_y - (hp - 1) * delta_yp; //纬度
                double xmin = (l - 31) * delta_x + (lp - 1) * delta_xp;//经度

                //推算指定图幅号右下角点坐标
                double ymin = ymax - delta_yp;
                double xmax = xmin + delta_xp;

                //将点转换成地图存储单位Map(Metres)  convertUnits
                //esriUnits CurMapUnits = this.axMapControl1.Map.MapUnits;
                IUnitConverter UC_map = new UnitConverterClass();

                double yMax = UC_map.ConvertUnits(ymax, esriUnits.esriDecimalDegrees, m_CurMapUnits);
                double yMin = UC_map.ConvertUnits(ymin, esriUnits.esriDecimalDegrees, m_CurMapUnits);

                double xMax = UC_map.ConvertUnits(xmax, esriUnits.esriDecimalDegrees, m_CurMapUnits);
                double xMin = UC_map.ConvertUnits(xmin, esriUnits.esriDecimalDegrees, m_CurMapUnits);

                pEnvelope.PutCoords(xMin, yMin, xMax, yMax);

                return pEnvelope;
            }
            else
            {            
                return null;
            }

        }
        #endregion

 

        #region 各比例尺经纬度差

        private void initialScaleMark(ScaleMark pScaleMark, IPoint scaleDelta)
        {
            //IPoint[] scaleArr = new IPoint[8];
            //IPoint scaleDelta = new PointClass();

            switch (pScaleMark)
            {
                case ScaleMark.A:
                    scaleDelta.X = 6;//1:100万经差(度)
                    scaleDelta.Y = 4;//1:100万纬差(度)
                    break;
                case ScaleMark.B:
                    scaleDelta.X = 3;//1:50万经差(度)
                    scaleDelta.Y = 2;//1:50万纬差(度) 
                    break;
                case ScaleMark.C:
                    scaleDelta.X = 1.5;//1:25万经差(度)
                    scaleDelta.Y = 1;//1:25万纬差(度)
                    break;
                case ScaleMark.D:
                    scaleDelta.X = 0.5;//1:10万经差(度)
                    scaleDelta.Y = 0.33333;//1:10万纬差(度)
                    break;
                case ScaleMark.E:
                    scaleDelta.X = 0.25;//1:5万经差(度)
                    scaleDelta.Y = 0.16667;//1:5万纬差(度)
                    break;
                case ScaleMark.F:
                    scaleDelta.X = 0.125;//1:2.5万经差(度)
                    scaleDelta.Y = 0.08333;//1:2.5万纬差(度)
                    break;
                case ScaleMark.G:
                    scaleDelta.X = 0.0625;//1:1万经差(度)
                    scaleDelta.Y = 0.04167;//1:1万纬差(度)
                    break;
                case ScaleMark.H:
                    scaleDelta.X = 0.03125;//1:5000经差(度)
                    scaleDelta.Y = 0.02083;//1:5000纬差(度)
                    break;

            }

        }
        #endregion

#region 调整elements里面的显示框标准(因为我用了ae中pagelayout的模板,所以要把MapFrame调整到图幅框的缩放比例)
        public void AdjustMapFrameInPageLayout(IMapFrame pMapFrame, IEnvelope pMapControlEnv)
        {
            //调整elements里面的显示框标准
            //IMapFrame pMapFrame = ((IActiveView)this.axPageLayoutControl1.PageLayout).GraphicsContainer.FindFrame(this.axPageLayoutControl1.ActiveView.FocusMap) as IMapFrame;
            IElement pElement = pMapFrame as IElement;


            //获取当前mapFrame的中心点坐标;
            IEnvelope MainEnv = pElement.Geometry.Envelope;
            pElement.QueryBounds(this.axPageLayoutControl1.ActiveView.ScreenDisplay, MainEnv);

            IPoint pCenterPoint = new PointClass();//MapFrame中心点坐标
            pCenterPoint.X = MainEnv.XMax - MainEnv.Width / 2;
            pCenterPoint.Y = MainEnv.YMax - MainEnv.Height / 2;


            //根据当前MapFrame的标准和pEnvelope的比例关系决定更改后的MapFrame长宽度

            double ratio = pMapControlEnv.Height / pMapControlEnv.Width;
            double CurMapFrameRatio = MainEnv.Height / MainEnv.Width;

            //IEnvelope pageEnvelope = this.axPageLayoutControl1.PageLayout.Page.PrintableBounds;
            double dDataFrameWidth, dDataFrameHeight;

            double scale;

            if (ratio >= CurMapFrameRatio)
            {
                dDataFrameHeight = MainEnv.Height;
                dDataFrameWidth = dDataFrameHeight / ratio;
            }

            else
            {
                dDataFrameWidth = MainEnv.Width;//地图MapFrame应该的宽度
                dDataFrameHeight = dDataFrameWidth * ratio;//地图MapFrame应该的高度           
            }

            IElement tempElement = pMapFrame as IElement;
            tempElement.Geometry = pMapControlEnv;
            ITransform2D pTransform2d = (ITransform2D)tempElement;

            IPoint pFrameCenter = new PointClass();
            pFrameCenter.X = pMapControlEnv.XMax - pMapControlEnv.Width / 2;
            pFrameCenter.Y = pMapControlEnv.YMax - pMapControlEnv.Height / 2;

            scale = dDataFrameWidth / pMapControlEnv.Width;//缩放比例

            double dx = pCenterPoint.X - pFrameCenter.X;
            double dy = pCenterPoint.Y - pFrameCenter.Y;
            pTransform2d.Move(dx, dy);//移动到指定位置
            pTransform2d.Scale(pCenterPoint, scale, scale);//将MapFrame图形缩放      

        }
        #endregion

 

//最后图幅加载到pagelayout中显示,是单击按钮事件哦

        private void bt_contain_Click(object sender, EventArgs e)
        {
            try
            {
                this.splitCodeValue();

                this.pFGE.axPageLayoutControl1.LoadMxFile(pFGE.filename, "");

                //生成指定图幅号图幅两个对角点的坐标 IEnvelope FromGeocodingDawn(string geocoding)
                //double xMin = 555000;
                //double yMin = 2898000;
                //double xMax = 560000;
                //double yMax = 2904000;    

                //确定一个矩形 
                IEnvelope pEnvelope = new EnvelopeClass();
                pEnvelope = this.FromGeocodingDawn();//.PutCoords(xMin, yMin, xMax, yMax);


                //用此矩形切底图,并加载到pagelayoutcontrol中显示

                IActiveView pActiveView = pFGE.axMapControl1.ActiveView.FocusMap as IActiveView;
                pFGE.axMapControl1.ActiveView.Extent = pEnvelope;


                IActiveView activeView = pFGE.axPageLayoutControl1.ActiveView.FocusMap as IActiveView;
                IDisplayTransformation DT = new DisplayTransformationClass();
                DT = activeView.ScreenDisplay.DisplayTransformation;

                DT.VisibleBounds = pEnvelope;
                activeView.Refresh();

                //调整elements里面的显示框标准
                IMapFrame pMapFrame = ((IActiveView)pFGE.axPageLayoutControl1.PageLayout).GraphicsContainer.FindFrame(pFGE.axPageLayoutControl1.ActiveView.FocusMap) as IMapFrame;

                this.pFGE.AdjustMapFrameInPageLayout(pMapFrame, pEnvelope);

            }

            catch (Exception ex)
            {
                MessageBox.Show(ex.ToString());
            }

        }

 

看看效果吧~~
 


本文来自CSDN博客,转载请标明出处:http://blog.csdn.net/yanleigis/archive/2008/10/15/3078691.aspx

你可能感兴趣的:(算法)