virtio支持的kvm和内核版本要求（方法二）

Virtio

[ edit]

Paravirtualized drivers for kvm/Linux

• Virtio was chosen to be the main platform for IO virtualization in KVM
• The idea behind it is to have a common framework for hypervisors for IO virtualization
• More information (although not uptodate) can be found here
• At the moment network/block/balloon devices are suported for kvm
• The host implementation is in userspace - qemu, so no driver is needed in the host.

[ edit]

How to use Virtio

• Get kvm version >= 60
• Get Linux kernel with virtio drivers for the guest
  • Get Kernel >= 2.6.25 and activate (modules should also work, but take care of initramdisk)
    • CONFIG_VIRTIO_PCI=y (Virtualization -> PCI driver for virtio devices)
    • CONFIG_VIRTIO_BALLOON=y (Virtualization -> Virtio balloon driver)
    • CONFIG_VIRTIO_BLK=y (Device Drivers -> Block -> Virtio block driver)
    • CONFIG_VIRTIO_NET=y (Device Drivers -> Network device support -> Virtio network driver)
    • CONFIG_VIRTIO=y (automatically selected)
    • CONFIG_VIRTIO_RING=y (automatically selected)
    • you can safely disable SATA/SCSI and also all other nic drivers if you only use VIRTIO (disk/nic)
• As an alternative one can use a standard guest kernel for the guest > 2.6.18 and make use sync backward compatibility option
  • Backport and instructions can be found in kvm-guest-drivers-linux.git
• Use model=virtio for the network devices and if=virtio for disk
  • Example

qemu/x86_64-softmmu/qemu-system-x86_64 -boot c -drive file=/images/xpbase.qcow2,if=virtio,boot=on -m 384 -net nic,model=virtio -net tap,script=/etc/kvm/qemu-ifup

• -hd[ab] for disk won't work, use -drive
• Disk will show up as /dev/vd[a-z][1-9], if you migrate you need to change "root=" in Lilo/GRUB config
• At the moment the kernel modules are automatically loaded inthe guest but the interface should be started manually(dhclient/ifconfig)
• Currently performance is much better when using a hostkernel configured with CONFIG_HIGH_RES_TIMERS. Another option is useHPET/RTC and -clock= qemu option.
• Expected performance
  • Performance varies from host to host, kernel to kernel
  • On my laptop I measured 1.1Gbps rx throughput using 2.6.23, 850Mbps tx.
  • Ping latency is 300-500 usec

方法二：
利用virtio格式创建的虚拟机，其内核版本为2.6.32，可以正常启动，所以以前2.6.18版本的内核报告的错误就可以解释了。
另外，model type='virtio'，而默认为e1000，多次dhcp尝试仍然无法分得ip，所以猜测和创建虚拟己时设置的网卡类型有关。

所以创建虚拟机时要打开virtio_net和virtio_balloon。如何打开，继续研究。