UIScrollView实现六棱柱图片浏览效果

目录

• 一、效果展示
• 二、实现原理
• 三、代码
• 四、总结与思考

一、效果展示

废话开篇：利用 CATransform3D 图形变换及 UIScrollView 的一些方法实现一个六棱柱图片浏览效果

二、实现原理

1、在一个基础 View 上添加六棱柱的六个侧面视图。

2、调整六棱柱的各个侧面的旋转角度及z轴数值。

3、基础 View 放在 UIScrollView 上，通过监听 UIScrollView 的滑动来设置基础 View 的坐标x值与与y轴的旋转角度。

三、代码

创建 PhotoDrumBrowseView 图片浏览类视图

#import "PhotoDrumBrowseView.h"
@interface PhotoDrumBrowseView()
@property(nonatomic,strong) UIScrollView * baseScrollView;
@property(nonatomic,strong) UIView * baseView;
@property(nonatomic,assign) CGRect originalBaseViewFrame;
@end
@implementation PhotoDrumBrowseView
- (instancetype)initWithFrame:(CGRect)frame
{
    if (self = [super initWithFrame:frame]) {
        [self createUI];
        [self addDrumBrowseImageView];
    }
    return self;
}
- (void)createUI{
    //滚动视图其实主要是用来通过位置偏移进行计算旋转的角度（通过偏移量与总宽度计算旋转角度与一周2π的比值）
    self.baseScrollView = [[UIScrollView alloc] initWithFrame:self.bounds];
    self.baseScrollView.showsHorizontalScrollIndicator = NO;
    [self addSubview:self.baseScrollView];
    CGFloat cellWidth = self.frame.size.width * 5.0 / 6.0;
    CGFloat cellHeight = cellWidth / 0.618;
    //加载六棱柱六个面
    self.baseView = [[UIView alloc] initWithFrame:CGRectMake((self.frame.size.width - cellWidth) / 2.0, (self.frame.size.height - cellHeight) * 1 / 3.0, cellWidth, cellHeight)];
    self.originalBaseViewFrame = self.baseView.frame;
    [self.baseScrollView addSubview:self.baseView];
}
//创建六棱柱面
- (void)addDrumBrowseImageView{
    int num = 6;
    //一些角度计算
    float radian = (M_PI * 2) / num;
    float cellWidth = self.baseView.frame.size.width / 2.0;
    float cellHeight = cellWidth / 0.618;
    //前后z轴偏移值
    float needBFOff = cellWidth * sin(radian);
    //左右x轴偏移值
    float needLROff = cellWidth / 2.0 * cos(radian) + cellWidth / 2.0;
    self.baseScrollView.contentSize = CGSizeMake(self.frame.size.width / 2.0 + self.baseView.frame.size.width * num, 0);
    self.baseScrollView.delegate = self;
    for (int i = 0; i < num; i ++) {
        UIImageView * imageView = [[UIImageView alloc] initWithFrame:CGRectMake((self.baseView.frame.size.width - cellWidth) / 2.0, (self.baseView.frame.size.height - cellHeight) / 2.0, cellWidth, cellHeight)];
        imageView.contentMode = UIViewContentModeScaleAspectFill;
        imageView.clipsToBounds = YES;
        imageView.image = [UIImage imageNamed:[NSString stringWithFormat:@"fd%d",i % 3 + 1]];
        [self.baseView addSubview:imageView];
        switch (i) {
            case 0:
            {
                //前左
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, -needLROff, 0,needBFOff / 2.0);
                imageView.layer.transform = CATransform3DRotate(imageView.layer.transform,- radian, 0, 1, 0);
            }
                break;
            case 1:
            {
                //前
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, 0, 0, needBFOff);
            }
                break;
            case 2:
            {
                //前右
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, needLROff, 0,needBFOff / 2.0);
                imageView.layer.transform = CATransform3DRotate(imageView.layer.transform, radian, 0, 1, 0);
            }
                break;
            case 3:
            {
                //前右
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, needLROff, 0, - needBFOff / 2.0);
                imageView.layer.transform = CATransform3DRotate(imageView.layer.transform,- radian, 0, 1, 0);
            }
                break;
            case 4:
            {
                //后
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, 0, 0, - needBFOff);
            }
                break;
            case 5:
            {
                //后左
                imageView.layer.transform = CATransform3DTranslate(imageView.layer.transform, -needLROff, 0,- needBFOff / 2.0);
                imageView.layer.transform = CATransform3DRotate(imageView.layer.transform, radian, 0, 1, 0);
            }
                break;
            default:
                break;
        }
    }
    //同时设置六个面的透视参数
    CATransform3D transformPerspective = CATransform3DIdentity;
    transformPerspective.m34 = -1.0f/800;
    self.baseView.layer.sublayerTransform = transformPerspective;
}
#pragma mark - 滚动进行图形变换
- (void)scrollViewDidScroll:(UIScrollView *)scrollView
{
    float offset = CGRectGetMinX(self.originalBaseViewFrame);
    //通过偏移量计算应该绕y轴旋转的角度
    float persent = (scrollView.contentOffset.x - offset) / (scrollView.contentSize.width - offset);
    //修改基础视图的frame，保持相对位置不变
    self.baseView.frame = CGRectMake(self.originalBaseViewFrame.origin.x + scrollView.contentOffset.x, self.originalBaseViewFrame.origin.y, self.originalBaseViewFrame.size.width, self.originalBaseViewFrame.size.height);
    //进行y轴旋转
    CATransform3D transformR = CATransform3DMakeRotation(-(M_PI * 2) * persent, 0, 1, 0);
    CATransform3D transformPerspective = CATransform3DIdentity;
    transformPerspective.m34 = -1.0f/800;
    self.baseView.layer.sublayerTransform = CATransform3DConcat(transformR, transformPerspective);
}
@end

四、总结与思考

简单的六棱柱图片浏览就完成了，复杂的部分主要是计算六个面的位置及y轴旋转角度，可以通过修改六个面的视图，丰富一下内部的功能。view 在经过 transform 设置之后，它的 frame 的属性值也会随着修改，如果从扩展一些功能也是可以的。比如，有个菱形的按钮，那么，是不是可以将按钮沿x轴、y轴都进行选择得到一个菱形，这样的菱形按钮的点击范围就会在其内部了。

以上就是UIScrollView实现六棱柱图片浏览效果的详细内容，更多关于UIScrollView 六棱柱图片浏览的资料请关注脚本之家其它相关文章！