ish安装scrapy记录
记录iphone手机安装 scrapy 包的步骤
收获:
当 pip3 install xxx 装不上时, 可以试试 apk add py3-xxx
效果图:
步骤:
一. App Store 搜索下载 iSH
二. 安装 ssh:
welcome to Alpine!
You can install packages with: apk add
You may change this message by editing /etc/motd.
1. apk add openssh
iPhone-3:~# apk add openssh
fetch https://dl-cdn.alpinelinux.org/alpine/v3.14
/main/x86/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.14
/community/x86/APKINDEX.tar.gz
(1/10) Installing openssh-keygen (8.6_p1-r3)
(2/10) Installing ncurses-terminfo-base (6.2_p202
10612-r1)
(3/10) Installing ncurses-libs (6.2_p20210612-r1)
(4/10) Installing libedit (20210216.3.1-r0)
(5/10) Installing openssh-client-common (8.6_p1-r
3)
(6/10) Installing openssh-client-default (8.6_p1-
r3)
(7/10) Installing openssh-sftp-server (8.6_p1-r3)
(8/10) Installing openssh-server-common (8.6_p1-r
3)
(9/10) Installing openssh-server (8.6_p1-r3)
(10/10) Installing openssh (8.6_p1-r3)
Executing busybox-1.33.1-r6.trigger
OK: 12 MiB in 24 packages
2. ssh-keygen -A (此处可能需要稍等一下)
iPhone-3:~# ssh-keygen -A
ssh-keygen: generating new host keys: RSA DSA ECD SA ED25519
3. passwd 设置密码(123456)
iPhone-3:~# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
passwd: password for root changed by root
4. echo ‘PermitRootLogin yes’>>/etc/ssh/sshd_config 配置权限
iPhone-3:~# echo 'PermitRootLogin yes'>>/etc/ssh/sshd_config
5. /usr/sbin/sshd 开启ssh
iPhone-3:~# /usr/sbin/sshd
iPhone-3:~#
三. 电脑cmd命令提示符窗口连接手机(设置/无线局域网/查看手机ip, 手机与电脑需要使用同一个路由 | 也可使用手机热点分享电脑, 电脑ipconfig查看dns即为手机ip)
Microsoft Windows [版本 10.0.19044.1889]
(c) Microsoft Corporation。保留所有权利。
1. ssh [email protected]
C:\Users\dell>ssh [email protected]
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the ECDSA key sent by the remote host is
SHA256:8iXU7B5HizAxbbvlcQ+or7SjJ5d+2FTYCq0gt3ZWd1Q.
Please contact your system administrator.
Add correct host key in C:\\Users\\dell/.ssh/known_hosts to get rid of this message.
Offending ECDSA key in C:\\Users\\dell/.ssh/known_hosts:23
ECDSA host key for 192.168.2.136 has changed and you have requested strict checking.
Host key verification failed.
1.1 ssh-keygen -R 192.168.2.136 (有警告需要添加此行)
C:\Users\dell>ssh-keygen -R 192.168.2.136
# Host 192.168.2.136 found: line 23
C:\Users\dell/.ssh/known_hosts updated.
Original contents retained as C:\Users\dell/.ssh/known_hosts.old
2. yes
C:\Users\dell>ssh [email protected]
The authenticity of host '192.168.2.136 (192.168.2.136)' can't be established.
ECDSA key fingerprint is SHA256:8iXU7B5HizAxbbvlcQ+or7SjJ5d+2FTYCq0gt3ZWd1Q.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.136' (ECDSA) to the list of known hosts.
3. 输入设置的密码(123456)
[email protected]'s password:
Welcome to Alpine!
You can install packages with: apk add
You may change this message by editing /etc/motd.
iPhone-3:~#
四. python安装
1. apk add python3
iPhone-3:~# apk add python3
fetch https://dl-cdn.alpinelinux.org/alpine/v3.14/main/x86/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.14/community/x86/APKINDEX.tar.gz
(1/11) Installing libbz2 (1.0.8-r1)
(2/11) Installing expat (2.4.7-r0)
(3/11) Installing libffi (3.3-r2)
(4/11) Installing gdbm (1.19-r0)
(5/11) Installing xz-libs (5.2.5-r1)
(6/11) Installing libgcc (10.3.1_git20210424-r2)
(7/11) Installing libstdc++ (10.3.1_git20210424-r2)
(8/11) Installing mpdecimal (2.5.1-r1)
(9/11) Installing readline (8.1.0-r0)
(10/11) Installing sqlite-libs (3.35.5-r0)
(11/11) Installing python3 (3.9.5-r2)
Executing busybox-1.33.1-r6.trigger
OK: 61 MiB in 35 packages
2. apk add --update py-pip
iPhone-3:~# apk add --update py-pip
(1/25) Installing py3-appdirs (1.4.4-r2)
(2/25) Installing py3-chardet (4.0.0-r2)
(3/25) Installing py3-idna (3.2-r0)
(4/25) Installing py3-urllib3 (1.26.5-r0)
(5/25) Installing py3-certifi (2020.12.5-r1)
(6/25) Installing py3-requests (2.25.1-r4)
(7/25) Installing py3-msgpack (1.0.2-r1)
(8/25) Installing py3-lockfile (0.12.2-r4)
(9/25) Installing py3-cachecontrol (0.12.6-r1)
(10/25) Installing py3-colorama (0.4.4-r1)
(11/25) Installing py3-contextlib2 (0.6.0-r1)
(12/25) Installing py3-distlib (0.3.1-r3)
(13/25) Installing py3-distro (1.5.0-r3)
(14/25) Installing py3-six (1.15.0-r1)
(15/25) Installing py3-webencodings (0.5.1-r4)
(16/25) Installing py3-html5lib (1.1-r1)
(17/25) Installing py3-parsing (2.4.7-r2)
(18/25) Installing py3-packaging (20.9-r1)
(19/25) Installing py3-toml (0.10.2-r2)
(20/25) Installing py3-pep517 (0.10.0-r2)
(21/25) Installing py3-progress (1.5-r2)
(22/25) Installing py3-retrying (1.3.3-r1)
(23/25) Installing py3-ordered-set (4.0.2-r1)
(24/25) Installing py3-setuptools (52.0.0-r3)
(25/25) Installing py3-pip (20.3.4-r1)
Executing busybox-1.33.1-r6.trigger
OK: 82 MiB in 60 packages
五. scrapy安装:
1. 下载解压安装scrapy包
获取地址
Scrapy 2.6.2
→ Scrapy-2.6.2.tar.gz
→ 右键 → 复制链接地址
→ https://files.pythonhosted.org/packages/93/d1/0348e389b382f2093ddb866cb23073487379303233a782ad8ff1e9ae0fc8/Scrapy-2.6.2.tar.gz
下载解压安装scrapy:
iPhone-3:~# mkdir scrapy
iPhone-3:~# ls
scrapy
iPhone-3:~# cd scrapy
iPhone-3:~/scrapy# ls
iPhone-3:~/scrapy# wget https://files.pythonhosted.org/packages/93/d1/0348e389b382f2093ddb866cb23073487379303233a782ad8ff1e9ae0fc8/Scrapy-2.6.2.tar.gz
Connecting to files.pythonhosted.org (151.101.109.63:443)
saving to 'Scrapy-2.6.2.tar.gz'
Scrapy-2.6.2.tar.gz 100% |************************************************************************| 1081k 0:00:00 ETA
'Scrapy-2.6.2.tar.gz' saved
iPhone-3:~/scrapy# ls
Scrapy-2.6.2.tar.gz
iPhone-3:~/scrapy# tar -xf Scrapy-2.6.2.tar.gz
iPhone-3:~/scrapy# ls
Scrapy-2.6.2 Scrapy-2.6.2.tar.gz
iPhone-3:~/scrapy# cd Scrapy-2.6.2/
iPhone-3:~/scrapy/Scrapy-2.6.2# ls
AUTHORS MANIFEST.in README.rst conftest.py pytest.ini setup.py
INSTALL NEWS Scrapy.egg-info docs scrapy tests
LICENSE PKG-INFO codecov.yml extras setup.cfg tox.ini
iPhone-3:~/scrapy/Scrapy-2.6.2# python3 setup.py install
...
warning: no previously-included files matching '*.bat' found anywhere in distribution
warning: no previously-included files matching './CVS' found anywhere in distribution
warning: no previously-included files matching '.cvsignore' found anywhere in distribution
zip_safe flag not set; analyzing archive contents...
Moving PyDispatcher-2.0.5-py3.9.egg to /usr/lib/python3.9/site-packages
Adding PyDispatcher 2.0.5 to easy-install.pth file
Installed /usr/lib/python3.9/site-packages/PyDispatcher-2.0.5-py3.9.egg
Searching for lxml>=3.5.0
Reading https://pypi.org/simple/lxml/
Downloading https://files.pythonhosted.org/packages/70/bb/7a2c7b4f8f434aa1ee801704bf08f1e53d7b5feba3d5313ab17003477808/lxml-4.9.1.tar.gz#sha256=fe749b052bb7233fe5d072fcb549221a8cb1a16725c47c37e42b0b9cb3ff2c3f
Best match: lxml 4.9.1
Processing lxml-4.9.1.tar.gz
Writing /tmp/easy_install-3yrt2xvo/lxml-4.9.1/setup.cfg
Running lxml-4.9.1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-3yrt2xvo/lxml-4.9.1/egg-dist-tmp-3bsprqzl
Building lxml version 4.9.1.
Building without Cython.
Error: Please make sure the libxml2 and libxslt development packages are installed.
error: Setup script exited with 1
2. 安装依赖包:
apk add py3-lxml py3-cryptography py3-service_identity py3-openssl
iPhone-3:~/scrapy/Scrapy-2.6.2# apk add py3-lxml py3-cryptography py3-service_identity py3-openssl
(1/15) Installing py3-cparser (2.20-r1)
(2/15) Installing py3-cffi (1.14.5-r1)
(3/15) Installing py3-asn1crypto (1.4.0-r1)
(4/15) Installing py3-cryptography (3.3.2-r1)
(5/15) Installing libgpg-error (1.42-r0)
(6/15) Installing libgcrypt (1.9.4-r0)
(7/15) Installing libxml2 (2.9.14-r1)
(8/15) Installing libxslt (1.1.35-r0)
(9/15) Installing py3-lxml (4.6.3-r1)
(10/15) Installing py3-openssl (20.0.1-r1)
(11/15) Installing py3-asn1 (0.4.8-r1)
(12/15) Installing py3-asn1-modules (0.2.8-r1)
(13/15) Installing py3-attrs (20.3.0-r1)
(14/15) Installing py3-characteristic (14.3.0-r7)
(15/15) Installing py3-service_identity (18.1.0-r4)
Executing busybox-1.33.1-r6.trigger
OK: 97 MiB in 75 packages
pip3 install twisted w3lib parsel tldextract itemadapter itemloaders protego queuelib
iPhone-3:~/scrapy/Scrapy-2.6.2# pip3 install twisted w3lib parsel tldextract itemadapter itemloaders protego queuelib
Collecting twisted
Downloading Twisted-22.4.0-py3-none-any.whl (3.1 MB)
|████████████████████████████████| 3.1 MB 275 kB/s
Collecting w3lib
Downloading w3lib-2.0.1-py3-none-any.whl (20 kB)
Collecting parsel
Downloading parsel-1.6.0-py2.py3-none-any.whl (13 kB)
Collecting tldextract
Downloading tldextract-3.3.1-py3-none-any.whl (93 kB)
|████████████████████████████████| 93 kB 96 kB/s
Collecting itemadapter
Downloading itemadapter-0.7.0-py3-none-any.whl (10 kB)
Collecting itemloaders
Downloading itemloaders-1.0.4-py3-none-any.whl (11 kB)
Collecting protego
Downloading Protego-0.2.1-py2.py3-none-any.whl (8.2 kB)
Collecting queuelib
Downloading queuelib-1.6.2-py2.py3-none-any.whl (13 kB)
Collecting jmespath>=0.9.5
Downloading jmespath-1.0.1-py3-none-any.whl (20 kB)
Requirement already satisfied: six>=1.6.0 in /usr/lib/python3.9/site-packages (from parsel) (1.15.0)
Requirement already satisfied: lxml in /usr/lib/python3.9/site-packages (from parsel) (4.6.3)
Collecting cssselect>=0.9
Downloading cssselect-1.1.0-py2.py3-none-any.whl (16 kB)
Collecting requests-file>=1.4
Downloading requests_file-1.5.1-py2.py3-none-any.whl (3.7 kB)
Collecting filelock>=3.0.8
Downloading filelock-3.8.0-py3-none-any.whl (10 kB)
Requirement already satisfied: idna in /usr/lib/python3.9/site-packages (from tldextract) (3.2)
Requirement already satisfied: requests>=2.1.0 in /usr/lib/python3.9/site-packages (from tldextract) (2.25.1)
Requirement already satisfied: chardet<5,>=3.0.2 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (4.0.0)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (1.26.5)
Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (2020.12.5)
Collecting hyperlink>=17.1.1
Downloading hyperlink-21.0.0-py2.py3-none-any.whl (74 kB)
|████████████████████████████████| 74 kB 140 kB/s
Collecting typing-extensions>=3.6.5
Downloading typing_extensions-4.3.0-py3-none-any.whl (25 kB)
Collecting Automat>=0.8.0
Downloading Automat-20.2.0-py2.py3-none-any.whl (31 kB)
Collecting constantly>=15.1
Downloading constantly-15.1.0-py2.py3-none-any.whl (7.9 kB)
Collecting zope.interface>=4.4.2
Downloading zope.interface-5.4.0.tar.gz (249 kB)
|████████████████████████████████| 249 kB 356 kB/s
Collecting incremental>=21.3.0
Downloading incremental-21.3.0-py2.py3-none-any.whl (15 kB)
Requirement already satisfied: attrs>=19.2.0 in /usr/lib/python3.9/site-packages (from twisted) (20.3.0)
Requirement already satisfied: setuptools in /usr/lib/python3.9/site-packages (from zope.interface>=4.4.2->twisted) (52.0.0)
Using legacy 'setup.py install' for zope.interface, since package 'wheel' is not installed.
Installing collected packages: w3lib, cssselect, zope.interface, typing-extensions, requests-file, parsel, jmespath, itemadapter, incremental, hyperlink, filelock, constantly, Automat, twisted, tldextract, queuelib, protego, itemloaders
Running setup.py install for zope.interface ... done
3. 另启动一个cmd, ssh连接手机, 输入 scrapy 查看:
C:\Users\dell>ssh [email protected]
[email protected]'s password:
Welcome to Alpine!
You can install packages with: apk add
You may change this message by editing /etc/motd.
iPhone-3:~# scrapy
Scrapy 2.6.2 - no active project
Usage:
scrapy [options] [args]
Available commands:
bench Run quick benchmark test
commands
fetch Fetch a URL using the Scrapy downloader
genspider Generate new spider using pre-defined templates
runspider Run a self-contained spider (without creating a project)
settings Get settings values
shell Interactive scraping console
startproject Create new project
version Print Scrapy version
view Open URL in browser, as seen by Scrapy
[ more ] More commands available when run from project directory
Use "scrapy -h" to see more info about a command
以下为记录备份.
scrapy 尝试安装记录:
● 安装 pip
● 安装 scrapy:
此处打开一个cmd, pip3 install scrapy → 卡住 → 再打开一个cmd, 输入 pip3 install scrapy, 一直重复
iPhone-6:~# pip3 install scrapy
Collecting scrapy
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLEOFError(8, 'EOF occurred in violation of protocol (_ssl.c:1129)'))': /packages/e2/8a/e3870cd597bbd4f47d7e1c97bbb67a6293270b9c413e083058ce6d6c7eb7/Scrapy-2.6.2-py2.py3-none-any.whl
Downloading Scrapy-2.6.2-py2.py3-none-any.whl (264 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━ 194.6/264.5 kB 1.0 MB/s eta 0:00:01
→ 最后卡在 Installing build dependencies ... \ ...
● 查询后, 解决方案为手动安装..:
→ 官网下载包 scrapy:
https://pypi.org/project/Scrapy/#files
https://files.pythonhosted.org/packages/93/d1/0348e389b382f2093ddb866cb23073487379303233a782ad8ff1e9ae0fc8/Scrapy-2.6.2.tar.gz
→ 解压 Scrapy-2.6.2.tar.gz
→ 在ish新建scrapy目录, 将 解压文件夹复制到 ish root/scrapy
F:\SoftwareInstallers\Scrapy-2.6.2.tar\Scrapy-2.6.2>scp -r Scrapy-2.6.2 [email protected]:/root/scrapy
→ 安装:
iPhone-6:~# cd scrapy
iPhone-6:~/scrapy# cd Scrapy-2.6.2/
iPhone-6:~/scrapy/Scrapy-2.6.2# ls
iPhone-6:~/scrapy/Scrapy-2.6.2# python3 setup.py install
iPhone-6:~/scrapy/Scrapy-2.6.2# scrapy
ModuleNotFoundError: No module named 'twisted'
iPhone-6:~/scrapy/Scrapy-2.6.2# pip3 install twisted
iPhone-6:~/scrapy/Scrapy-2.6.2# scrapy
ModuleNotFoundError: No module named 'w3lib'
iPhone-6:~/scrapy/Scrapy-2.6.2# pip3 install w3lib
iPhone-6:~/scrapy/Scrapy-2.6.2# scrapy
ModuleNotFoundError: No module named 'lxml'
→ 使用清华源:
pip3 install scrapy -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3 install lxml -i --trusted-host http://mirrors.aliyun.com/pypi/simple/
pip3 install lxml -i https://pypi.mirrors.ustc.edu.cn/simple
→ 下载 lxml:
https://pypi.org/project/lxml/#files
# pip3 install lxml
Error: Please make sure the libxml2 and libxslt development packages are installed.
# apk add gcc
# apk add libxslt-dev
# pip3 install lxml // 删除了 requirements.txt 里的内容.
Using legacy 'setup.py install' for lxml, since package 'wheel' is not installed.
下载 lxml-4.9.1 → python3 setup.py install
Python.h: No such file or directory
# apk add python3-dev
lxml4.9.1# python3 setup.py install
卡在 gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fomi
→ 下载 lxml-4.1.1
lxml4.1.1# python3 setup.py install
还是卡在 gcc...
PyTypeObject' {aka 'struct _typeobject'} has no member named 'tp_print'
233409 | __pyx_type_4lxml_5etree__Comment.tp_print = 0;
→ 说是 python3.6 能解决问题
→ 花了大半时间在这上面, 后面搜索到, 用下面命令就可以安装...
# apk add py3-lxml
# scrapy
ModuleNotFoundError: No module named 'parsel'
# pip3 install parsel
ERROR: pip's dependency resolver does not currently take ...
// ...
Successfully installed cssselect-1.1.0 parsel-1.6.0
# scrapy
The 'tldextract' distribution was not found and is required by Scrapy
# pip3 install tldextract
ERROR: pip's dependency resolver does not currently take ...
// ...
Successfully
# scrapy
.DistributionNotFound: The 'itemadapter>=0.1.0' distribution was not found and is required by Scrapy
# pip3 install itemadapter
Successfully
# scrapy
scrapy 2.6.2 requires cryptography>=2.0, which is not installed.
scrapy 2.6.2 requires itemloaders>=1.0.1, which is not installed.
scrapy 2.6.2 requires protego>=0.1.15, which is not installed.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
scrapy 2.6.2 requires service_identity>=16.0.0, which is not installed.
# pip3 install cryptography
卡老半天.. Installing build dependencies ...
# apk add py3-cryptography
# apk add py3-service_identity
# pip3 install itemloaders
# pip3 install protego
# pip3 install pyOpenSSL
Installing build dependencies ... 卡了一会儿
Installing build dependencies ... done
...
Building wheel for cryptography (pyproject.toml) ... error
# apk add py3-openssl
# pip3 install queuelib
iPhone-6:~/scrapy/lxml-4.5.0# scrapy
Scrapy 2.6.2 - no active project
Usage:
scrapy [options] [args]
Available commands:
bench Run quick benchmark test
commands
fetch Fetch a URL using the Scrapy downloader
genspider Generate new spider using pre-defined templates
runspider Run a self-contained spider (without creating a project)
settings Get settings values
shell Interactive scraping console
startproject Create new project
version Print Scrapy version
view Open URL in browser, as seen by Scrapy
[ more ] More commands available when run from project directory
Use "scrapy -h" to see more info about a command
iPhone-6:~/scrapy/lxml-4.5.0#
cmd备份:
iPhone-6:~# cd scrapy
iPhone-6:~/scrapy# ls
Scrapy-2.6.2 lxml-4.1.1 lxml-4.9.1
libxml2 lxml-4.1.1-cp34-cp34m-win_amd64.whl
lxml lxml-4.5.0
iPhone-6:~/scrapy# cd lxml-4.5.0
iPhone-6:~/scrapy/lxml-4.5.0# ls
CHANGES.txt PKG-INFO requirements.txt test.py
CREDITS.txt README.rst samples tools
INSTALL.txt TODO.txt setup.cfg update-error-constants.py
LICENSES.txt benchmark setup.py versioninfo.py
MANIFEST.in buildlibxml.py setupinfo.py
Makefile doc src
iPhone-6:~/scrapy/lxml-4.5.0# python3 setup.py install
Building lxml version 4.5.0.
Building without Cython.
Using build configuration of libxslt 1.1.35
Building against libxml2/libxslt in the following directory: /lib
running install
running bdist_egg
running egg_info
writing src/lxml.egg-info/PKG-INFO
writing dependency_links to src/lxml.egg-info/dependency_links.txt
writing requirements to src/lxml.egg-info/requires.txt
writing top-level names to src/lxml.egg-info/top_level.txt
reading manifest file 'src/lxml.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'src/lxml.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-i686/egg
running install_lib
running build_py
creating build
creating build/lib.linux-i686-3.9
creating build/lib.linux-i686-3.9/lxml
copying src/lxml/_elementpath.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/sax.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/pyclasslookup.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/__init__.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/builder.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/doctestcompare.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/usedoctest.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/cssselect.py -> build/lib.linux-i686-3.9/lxml
copying src/lxml/ElementInclude.py -> build/lib.linux-i686-3.9/lxml
creating build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/__init__.py -> build/lib.linux-i686-3.9/lxml/includes
creating build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/soupparser.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/defs.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/_setmixin.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/clean.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/ElementSoup.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/_diffcommand.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/html5parser.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/__init__.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/formfill.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/builder.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/_html5builder.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/usedoctest.py -> build/lib.linux-i686-3.9/lxml/html
copying src/lxml/html/diff.py -> build/lib.linux-i686-3.9/lxml/html
creating build/lib.linux-i686-3.9/lxml/isoschematron
copying src/lxml/isoschematron/__init__.py -> build/lib.linux-i686-3.9/lxml/isoschematron
copying src/lxml/etree.h -> build/lib.linux-i686-3.9/lxml
copying src/lxml/etree_api.h -> build/lib.linux-i686-3.9/lxml
copying src/lxml/lxml.etree.h -> build/lib.linux-i686-3.9/lxml
copying src/lxml/lxml.etree_api.h -> build/lib.linux-i686-3.9/lxml
copying src/lxml/includes/xmlerror.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/c14n.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/xmlschema.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/__init__.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/schematron.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/tree.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/uri.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/etreepublic.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/xpath.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/htmlparser.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/xslt.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/config.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/xmlparser.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/xinclude.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/dtdvalid.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/relaxng.pxd -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/lxml-version.h -> build/lib.linux-i686-3.9/lxml/includes
copying src/lxml/includes/etree_defs.h -> build/lib.linux-i686-3.9/lxml/includes
creating build/lib.linux-i686-3.9/lxml/isoschematron/resources
creating build/lib.linux-i686-3.9/lxml/isoschematron/resources/rng
copying src/lxml/isoschematron/resources/rng/iso-schematron.rng -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/rng
creating build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl
copying src/lxml/isoschematron/resources/xsl/XSD2Schtrn.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl
copying src/lxml/isoschematron/resources/xsl/RNG2Schtrn.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl
creating build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/iso_abstract_expand.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/iso_dsdl_include.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/iso_schematron_skeleton_for_xslt1.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/iso_svrl_for_xslt1.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/iso_schematron_message.xsl -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
copying src/lxml/isoschematron/resources/xsl/iso-schematron-xslt1/readme.txt -> build/lib.linux-i686-3.9/lxml/isoschematron/resources/xsl/iso-schematron-xslt1
running build_ext
building 'lxml.etree' extension
creating build/temp.linux-i686-3.9
creating build/temp.linux-i686-3.9/src
creating build/temp.linux-i686-3.9/src/lxml
gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fomit-frame-pointer -g -fno-semantic-interposition -fomit-frame-pointer -g -fno-semantic-interposition -fomit-frame-pointer -g -fno-semantic-interposition -DTHREAD_STACK_SIZE=0x100000 -fPIC -DCYTHON_CLINE_IN_TRACEBACK=0 -I/usr/include/libxml2 -Isrc -Isrc/lxml/includes -I/usr/include/python3.9 -c src/lxml/etree.c -o build/temp.linux-i686-3.9/src/lxml/etree.o -w
^Cinterrupted
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-lxml
(1/1) Installing py3-lxml (4.6.3-r1)
OK: 458 MiB in 111 packages
iPhone-6:~/scrapy/lxml-4.5.0# scrapy
Traceback (most recent call last):
File "/usr/bin/scrapy", line 33, in
sys.exit(load_entry_point('Scrapy==2.6.2', 'console_scripts', 'scrapy')())
File "/usr/bin/scrapy", line 25, in importlib_load_entry_point
return next(matches).load()
File "/usr/lib/python3.9/importlib/metadata.py", line 77, in load
module = import_module(match.group('module'))
File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "", line 1030, in _gcd_import
File "", line 1007, in _find_and_load
File "", line 972, in _find_and_load_unlocked
File "", line 228, in _call_with_frames_removed
File "", line 1030, in _gcd_import
File "", line 1007, in _find_and_load
File "", line 986, in _find_and_load_unlocked
File "", line 680, in _load_unlocked
File "", line 855, in exec_module
File "", line 228, in _call_with_frames_removed
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/__init__.py", line 12, in
from scrapy.spiders import Spider
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/spiders/__init__.py", line 10, in
from scrapy.http import Request
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/http/__init__.py", line 11, in
from scrapy.http.request.form import FormRequest
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/http/request/form.py", line 12, in
from parsel.selector import create_root_node
ModuleNotFoundError: No module named 'parsel'
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install parsel
Collecting parsel
Using cached parsel-1.6.0-py2.py3-none-any.whl (13 kB)
Requirement already satisfied: six>=1.6.0 in /usr/lib/python3.9/site-packages (from parsel) (1.15.0)
Collecting cssselect>=0.9
Using cached cssselect-1.1.0-py2.py3-none-any.whl (16 kB)
Requirement already satisfied: w3lib>=1.19.0 in /usr/lib/python3.9/site-packages (from parsel) (2.0.1)
Requirement already satisfied: lxml in /usr/lib/python3.9/site-packages (from parsel) (4.6.3)
Installing collected packages: cssselect, parsel
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires cryptography>=2.0, which is not installed.
scrapy 2.6.2 requires itemadapter>=0.1.0, which is not installed.
scrapy 2.6.2 requires itemloaders>=1.0.1, which is not installed.
scrapy 2.6.2 requires protego>=0.1.15, which is not installed.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
scrapy 2.6.2 requires service_identity>=16.0.0, which is not installed.
scrapy 2.6.2 requires tldextract, which is not installed.
Successfully installed cssselect-1.1.0 parsel-1.6.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# scrapy
Traceback (most recent call last):
File "/usr/bin/scrapy", line 33, in
sys.exit(load_entry_point('Scrapy==2.6.2', 'console_scripts', 'scrapy')())
File "/usr/bin/scrapy", line 25, in importlib_load_entry_point
return next(matches).load()
File "/usr/lib/python3.9/importlib/metadata.py", line 77, in load
module = import_module(match.group('module'))
File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "", line 1030, in _gcd_import
File "", line 1007, in _find_and_load
File "", line 986, in _find_and_load_unlocked
File "", line 680, in _load_unlocked
File "", line 855, in exec_module
File "", line 228, in _call_with_frames_removed
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/cmdline.py", line 6, in
import pkg_resources
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3243, in
def _initialize_master_working_set():
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3226, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3255, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 568, in _build_master
ws.require(__requires__)
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 886, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 772, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'tldextract' distribution was not found and is required by Scrapy
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install tldextract
Collecting tldextract
Using cached tldextract-3.3.1-py3-none-any.whl (93 kB)
Requirement already satisfied: idna in /usr/lib/python3.9/site-packages (from tldextract) (3.2)
Collecting requests-file>=1.4
Downloading requests_file-1.5.1-py2.py3-none-any.whl (3.7 kB)
Collecting filelock>=3.0.8
Downloading filelock-3.8.0-py3-none-any.whl (10 kB)
Requirement already satisfied: requests>=2.1.0 in /usr/lib/python3.9/site-packages (from tldextract) (2.25.1)
Requirement already satisfied: chardet<5,>=3.0.2 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (4.0.0)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (1.26.5)
Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.9/site-packages (from requests>=2.1.0->tldextract) (2020.12.5)
Requirement already satisfied: six in /usr/lib/python3.9/site-packages (from requests-file>=1.4->tldextract) (1.15.0)
Installing collected packages: filelock, requests-file, tldextract
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires cryptography>=2.0, which is not installed.
scrapy 2.6.2 requires itemadapter>=0.1.0, which is not installed.
scrapy 2.6.2 requires itemloaders>=1.0.1, which is not installed.
scrapy 2.6.2 requires protego>=0.1.15, which is not installed.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
scrapy 2.6.2 requires service_identity>=16.0.0, which is not installed.
Successfully installed filelock-3.8.0 requests-file-1.5.1 tldextract-3.3.1
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# scrapy
Traceback (most recent call last):
File "/usr/bin/scrapy", line 33, in
sys.exit(load_entry_point('Scrapy==2.6.2', 'console_scripts', 'scrapy')())
File "/usr/bin/scrapy", line 25, in importlib_load_entry_point
return next(matches).load()
File "/usr/lib/python3.9/importlib/metadata.py", line 77, in load
module = import_module(match.group('module'))
File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "", line 1030, in _gcd_import
File "", line 1007, in _find_and_load
File "", line 986, in _find_and_load_unlocked
File "", line 680, in _load_unlocked
File "", line 855, in exec_module
File "", line 228, in _call_with_frames_removed
File "/usr/lib/python3.9/site-packages/Scrapy-2.6.2-py3.9.egg/scrapy/cmdline.py", line 6, in
import pkg_resources
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3243, in
def _initialize_master_working_set():
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3226, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3255, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 568, in _build_master
ws.require(__requires__)
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 886, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 772, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'itemadapter>=0.1.0' distribution was not found and is required by Scrapy
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install itemadapter
Collecting itemadapter
Using cached itemadapter-0.7.0-py3-none-any.whl (10 kB)
Installing collected packages: itemadapter
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires cryptography>=2.0, which is not installed.
scrapy 2.6.2 requires itemloaders>=1.0.1, which is not installed.
scrapy 2.6.2 requires protego>=0.1.15, which is not installed.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
scrapy 2.6.2 requires service_identity>=16.0.0, which is not installed.
Successfully installed itemadapter-0.7.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install cryptography>=2.0 itemloaders>=1.0.1 protego>=0.1.15 pyOpenSSL>=16.2.0 queue
lib>=1.4.2 service_identity>=16.0.0
^CERROR: Operation cancelled by user
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install cryptography>=2.0
^CERROR: Operation cancelled by user
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install cryptography
Collecting cryptography
Using cached cryptography-37.0.4.tar.gz (585 kB)
Installing build dependencies ... \^canceled
ERROR: Operation cancelled by user
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-cryptography
(1/4) Installing py3-cparser (2.20-r1)
(2/4) Installing py3-cffi (1.14.5-r1)
(3/4) Installing py3-asn1crypto (1.4.0-r1)
(4/4) Installing py3-cryptography (3.3.2-r1)
OK: 463 MiB in 115 packages
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-itemloaders
ERROR: unable to select packages:
py3-itemloaders (no such package):
required by: world[py3-itemloaders]
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-protego
ERROR: unable to select packages:
py3-protego (no such package):
required by: world[py3-protego]
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-pyOpenSSL
ERROR: unable to select packages:
py3-pyOpenSSL (no such package):
required by: world[py3-pyOpenSSL]
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-queuelib
ERROR: unable to select packages:
py3-queuelib (no such package):
required by: world[py3-queuelib]
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-service_identity
(1/5) Installing py3-asn1 (0.4.8-r1)
(2/5) Installing py3-asn1-modules (0.2.8-r1)
(3/5) Installing py3-attrs (20.3.0-r1)
(4/5) Installing py3-characteristic (14.3.0-r7)
(5/5) Installing py3-service_identity (18.1.0-r4)
OK: 466 MiB in 120 packages
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install itemloaders
Collecting itemloaders
Using cached itemloaders-1.0.4-py3-none-any.whl (11 kB)
Requirement already satisfied: itemadapter>=0.1.0 in /usr/lib/python3.9/site-packages (from itemloaders) (0.7.0)
Requirement already satisfied: parsel>=1.5.0 in /usr/lib/python3.9/site-packages (from itemloaders) (1.6.0)
Collecting jmespath>=0.9.5
Downloading jmespath-1.0.1-py3-none-any.whl (20 kB)
Requirement already satisfied: w3lib>=1.17.0 in /usr/lib/python3.9/site-packages (from itemloaders) (2.0.1)
Requirement already satisfied: cssselect>=0.9 in /usr/lib/python3.9/site-packages (from parsel>=1.5.0->itemloaders) (1.1.0)
Requirement already satisfied: six>=1.6.0 in /usr/lib/python3.9/site-packages (from parsel>=1.5.0->itemloaders) (1.15.0)
Requirement already satisfied: lxml in /usr/lib/python3.9/site-packages (from parsel>=1.5.0->itemloaders) (4.6.3)
Installing collected packages: jmespath, itemloaders
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires protego>=0.1.15, which is not installed.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
Successfully installed itemloaders-1.0.4 jmespath-1.0.1
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install protego
Collecting protego
Using cached Protego-0.2.1-py2.py3-none-any.whl (8.2 kB)
Requirement already satisfied: six in /usr/lib/python3.9/site-packages (from protego) (1.15.0)
Installing collected packages: protego
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
scrapy 2.6.2 requires queuelib>=1.4.2, which is not installed.
Successfully installed protego-0.2.1
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install pyOpenSSL
Collecting pyOpenSSL
Using cached pyOpenSSL-22.0.0-py2.py3-none-any.whl (55 kB)
Collecting cryptography>=35.0
Using cached cryptography-37.0.4.tar.gz (585 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Requirement already satisfied: cffi>=1.12 in /usr/lib/python3.9/site-packages (from cryptography>=35.0->pyOpenSSL) (1.14.5)
Requirement already satisfied: pycparser in /usr/lib/python3.9/site-packages (from cffi>=1.12->cryptography>=35.0->pyOpenSSL) (2.20)
Building wheels for collected packages: cryptography
Building wheel for cryptography (pyproject.toml) ... error
error: subprocess-exited-with-error
× Building wheel for cryptography (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [194 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-i686-cpython-39
creating build/lib.linux-i686-cpython-39/cryptography
copying src/cryptography/__init__.py -> build/lib.linux-i686-cpython-39/cryptography
copying src/cryptography/utils.py -> build/lib.linux-i686-cpython-39/cryptography
copying src/cryptography/__about__.py -> build/lib.linux-i686-cpython-39/cryptography
copying src/cryptography/exceptions.py -> build/lib.linux-i686-cpython-39/cryptography
copying src/cryptography/fernet.py -> build/lib.linux-i686-cpython-39/cryptography
creating build/lib.linux-i686-cpython-39/cryptography/hazmat
copying src/cryptography/hazmat/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat
copying src/cryptography/hazmat/_oid.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat
creating build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/oid.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/ocsp.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/general_name.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/extensions.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/name.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/base.py -> build/lib.linux-i686-cpython-39/cryptography/x509
copying src/cryptography/x509/certificate_transparency.py -> build/lib.linux-i686-cpython-39/cryptography/x509
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/backends
copying src/cryptography/hazmat/backends/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_serialization.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/cmac.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_asymmetric.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_cipheralgorithm.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/poly1305.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/constant_time.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/keywrap.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/hmac.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/hashes.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/padding.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/bindings
copying src/cryptography/hazmat/bindings/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/bindings
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x448.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/backend.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ec.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ciphers.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x509.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/aead.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/encode_asn1.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/rsa.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/dh.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/cmac.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/utils.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/poly1305.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ed25519.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/dsa.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/decode_asn1.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/hmac.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ed448.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x25519.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/hashes.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/backends/openssl
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/scrypt.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/pbkdf2.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/hkdf.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/x963kdf.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/kbkdf.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/concatkdf.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/kdf
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/totp.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/hotp.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/twofactor
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/pkcs12.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/pkcs7.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/ssh.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/base.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/serialization
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/algorithms.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/aead.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/modes.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/base.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/ciphers
creating build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/x448.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/ec.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/rsa.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/dh.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/__init__.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/types.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/utils.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/ed25519.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/dsa.py -> build/lib.linux-i686-cpython-39/cryptography/hazmat/primitivesERROR: Operation cancelled by user
iPhone-6:~/scrapy/lxml-4.5.0# ^C
iPhone-6:~/scrapy/lxml-4.5.0# pip3 install queuelib
Collecting queuelib
Using cached queuelib-1.6.2-py2.py3-none-any.whl (13 kB)
Installing collected packages: queuelib
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scrapy 2.6.2 requires pyOpenSSL>=16.2.0, which is not installed.
Successfully installed queuelib-1.6.2
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
iPhone-6:~/scrapy/lxml-4.5.0# apk add py3-openssl
(1/1) Installing py3-openssl (20.0.1-r1)
OK: 467 MiB in 121 packages
iPhone-6:~/scrapy/lxml-4.5.0# scrapy
Scrapy 2.6.2 - no active project
Usage:
scrapy [options] [args]
Available commands:
bench Run quick benchmark test
commands
fetch Fetch a URL using the Scrapy downloader
genspider Generate new spider using pre-defined templates
runspider Run a self-contained spider (without creating a project)
settings Get settings values
shell Interactive scraping console
startproject Create new project
version Print Scrapy version
view Open URL in browser, as seen by Scrapy
[ more ] More commands available when run from project directory
Use "scrapy -h" to see more info about a command