opencv修改摄像头参数

 

1、opencv相机参数列表

enum VideoCaptureProperties {
       CAP_PROP_POS_MSEC       =0, //!< Current position of the video file in milliseconds.
       CAP_PROP_POS_FRAMES     =1, //!< 0-based index of the frame to be decoded/captured next.
       CAP_PROP_POS_AVI_RATIO  =2, //!< Relative position of the video file: 0=start of the film, 1=end of the film.
       CAP_PROP_FRAME_WIDTH    =3, //!< Width of the frames in the video stream.
       CAP_PROP_FRAME_HEIGHT   =4, //!< Height of the frames in the video stream.
       CAP_PROP_FPS            =5, //!< Frame rate.
       CAP_PROP_FOURCC         =6, //!< 4-character code of codec. see VideoWriter::fourcc .
       CAP_PROP_FRAME_COUNT    =7, //!< Number of frames in the video file.
       CAP_PROP_FORMAT         =8, //!< Format of the %Mat objects returned by VideoCapture::retrieve().
       CAP_PROP_MODE           =9, //!< Backend-specific value indicating the current capture mode.
       CAP_PROP_BRIGHTNESS    =10, //!< Brightness of the image (only for those cameras that support).
       CAP_PROP_CONTRAST      =11, //!< Contrast of the image (only for cameras).
       CAP_PROP_SATURATION    =12, //!< Saturation of the image (only for cameras).
       CAP_PROP_HUE           =13, //!< Hue of the image (only for cameras).
       CAP_PROP_GAIN          =14, //!< Gain of the image (only for those cameras that support).
       CAP_PROP_EXPOSURE      =15, //!< Exposure (only for those cameras that support).
       CAP_PROP_CONVERT_RGB   =16, //!< Boolean flags indicating whether images should be converted to RGB.
       CAP_PROP_WHITE_BALANCE_BLUE_U =17, //!< Currently unsupported.
       CAP_PROP_RECTIFICATION =18, //!< Rectification flag for stereo cameras (note: only supported by DC1394 v 2.x backend currently).
       CAP_PROP_MONOCHROME    =19,
       CAP_PROP_SHARPNESS     =20,
       CAP_PROP_AUTO_EXPOSURE =21, //!< DC1394: exposure control done by camera, user can adjust reference level using this feature.
       CAP_PROP_GAMMA         =22,
       CAP_PROP_TEMPERATURE   =23,
       CAP_PROP_TRIGGER       =24,
       CAP_PROP_TRIGGER_DELAY =25,
       CAP_PROP_WHITE_BALANCE_RED_V =26,
       CAP_PROP_ZOOM          =27,
       CAP_PROP_FOCUS         =28,
       CAP_PROP_GUID          =29,
       CAP_PROP_ISO_SPEED     =30,
       CAP_PROP_BACKLIGHT     =32,
       CAP_PROP_PAN           =33,
       CAP_PROP_TILT          =34,
       CAP_PROP_ROLL          =35,
       CAP_PROP_IRIS          =36,
       CAP_PROP_SETTINGS      =37, //!< Pop up video/camera filter dialog (note: only supported by DSHOW backend currently. The property value is ignored)
       CAP_PROP_BUFFERSIZE    =38,
       CAP_PROP_AUTOFOCUS     =39
     };

2、修改及读取相机参数，修改用cap.set，读取用cap.get

python示例：

import cv2 

#选择摄像头号，一般从 0 开始

cap = cv2.VideoCapture(0) 

#先设置参数，然后读取参数

cap.set(3,1280)

cap.set(4,1024)

cap.set(15, -7)

print("width={}".format(cap.get(3)))

print("height={}".format(cap.get(4)))

print("exposure={}".format(cap.get(15)))
 

while True:

    ret, img = cap.read()

    cv2.imshow("input", img)

# 按 ESC 键退出

    key = cv2.waitKey(10)

    if key == 27:

        break
 

cv2.destroyAllWindows() 

cv2.VideoCapture(0).release()