IEEETrans.cls模板使用排坑

用pdflatex而非xelatex编译IEEETrans的bare_conf_compsoc.tex模板

一直用的xelatex,但是字体,加粗等等一些细节格式不对劲,还报了一堆关于字体的警告,Font shape TU/ppl/m/n' undefined(Font) usingTU/lmr/m/n’ instead,原来是编译器不对,换成pdflatex就好了,字体也都成了IEEE要求的那些
IEEETrans.cls模板使用排坑_第1张图片

xelatex:
在这里插入图片描述

pdflatex:

IEEETrans.cls模板使用排坑_第2张图片

把Fig.1: 改为Fig.1.

看到IEEE论文的图注序号是Fig.1.而没有冒号,这个问题网上也有网友写了博客介绍怎么做,记录一下
在\begin{document}后面加这么一句代码就好了,得到加粗的图注序号

\begin{document}
	\captionsetup[figure]{labelfont={bf},labelformat={default},labelsep=period,name={Fig.}}

IEEETrans.cls模板使用排坑_第3张图片

表头序号设置为TABLE 1,没有冒号等

在导言区写

\DeclareCaptionLabelSeparator{twospace}{\ ~}   
\captionsetup{labelsep=twospace}

表格每一列靠左or居中or靠右

在\begin{document}后面加

	\newcolumntype{L}[1]{>{\raggedright\arraybackslash}p{#1}}
	\newcolumntype{C}[1]{>{\centering\arraybackslash}p{#1}}
	\newcolumntype{R}[1]{>{\raggedleft\arraybackslash}p{#1}}

表头居中(IEEE paper格式)

在每个表格的\begin{table}后面加一句

\captionsetup{justification=centering}

不要放在\begin{document}后面,而是单独放在每个表格里面,以免把图注也居中了

比如:

(里面的\begin{threeparttable}和\end{threeparttable}删掉不影响结果,不太清楚他的用法)

\begin{table}
	\begin{threeparttable}
	% 使得表头居中
		\captionsetup{justification=centering}
		% caption里面加换行符才可以换行哦
		\caption{ \\ Summary of extracted features}
		\label{fea_table}
		% 这里用L,R,C必须有上面说的\newcolumntype{R}[1]{>{\raggedleft\arraybackslash}p{#1}}等指令
		\begin{tabular*}{\linewidth}[t]{L{3cm}L{5.2cm}}
			\toprule
			\toprule
		
			Domain & Features\\
			\midrule
			Time  &  power, mean, standard deviation,
			normalized 1st difference, normalized 2nd 
			difference, mobility, complexity, non-stationary
			index, higher order crossings 
			of each channel; fractal dimension for each EEG channel.\\
				
			Frequency  & power law index, averaged band power of four 
			frequency bands, BE1, BE2, MMOB,
			FOSM derived from the bispectrum 
			of each EEG channel; magnitude squared
			coherence estimate, differential 
			asymmetry and rational asymmetry 
			averaged on four frequency bands 
			of 14 electrode pairs.\\
			
			Time-Frequency  &  entropy and the absolute 
			logarithmic recursive energy efficiency of
			detail coefficients at four decomposition 
			level, root mean square of the energy of 
			four frequency bands; averaged energy of 
			four frequency bands of the Hilbert-Huang
			spectrum of each channel.  \\
			\bottomrule
		\end{tabular*}
	\end{threeparttable}
\end{table}

注意\toprule, \midrule, \bottomrule要用\usepackage{booktabs}

效果(三线表)
IEEETrans.cls模板使用排坑_第4张图片

让表格用罗马数字排序

在导言区(\begin{document}前面)加一句

\renewcommand\thetable{\Roman{table}} 

在这里插入图片描述

你可能感兴趣的:(LaTeX)