RabbitMQ-客户端源码之AMQConnection

首先是初始化工作线程池（initializeConsumerWorkService）和初始化心跳线程（initializeHeartbeatSender）并设置运行状态为true(this._isrunning=true，这个值会在MainLoop线程中有用，控制MainLoop线程是否继续运行)。

“AMQChannel.SimpleBlockingRpcContinuation connStartBlocker = new AMQChannel.SimpleBlockingRpcContinuation();”这句代码，从命名上来说像是rpc, 其实这么理解也没错。RabbitMQ-Client这个版本（3.5.3）的客户端与broker端的通信是采用java原生socket.当然后面也改成了NIO，这个自然是后话。RabbitMQ-Client程序中会对各种帧进行处理，处理的方式也不是单一化的，这里举Connection.Start这个类型的报文做分析。当broker发送Connection.Start至client端，client收到之后进行处理（MainLoop线程中），然后将此报文存入SimpleBlockingRpcContinuation中，照着SimpleBlockingRpcContinuation深究下去，其就是一个容量为1的BlockingQueue,也就是当MainLoop主导的线程将收到的Connection.Start存入其中，然后AMQConnction类的start()线程在等待（start()方法下面的代码）：

connStart = (AMQP.Connection.Start) connStartBlocker.getReply(HANDSHAKE_TIMEOUT/2).getMethod();

然后继续处理。这看上去也算是个rpc，等待别的线程（这个线程同样在等待broker的返回）处理完毕。

AMQCommand(这个之后会讲到), 下面的“_channel0.enqueueRpc(connStartBlocker)”将这个rpc任务放入Channel中，如果深入代码看的话，channel中当前至多只能enqueue一个rpc，如果当前的rpc没有处理完再enqueue的话会被阻塞（wait()）直到处理完当前的rpc才能enqueue下一个rpc。

---

    try {
        // The following two lines are akin to AMQChannel's
        // transmit() method for this pseudo-RPC.
        _frameHandler.setTimeout(HANDSHAKE_TIMEOUT);
        _frameHandler.sendHeader();
    } catch (IOException ioe) {
        _frameHandler.close();
        throw ioe;
    }

接下来“_frameHandler.sendHeader()”主要是发送Protocol-Header 0-9-1帧（可参考下图），这个客户端与broker建立连接的AMQP协议的第一帧，帧中的内容包括AMQP的版本号。这里发_frameHandler就是前面Connection提到的SocketFrameHandler对象，我们来看看sendHeader()做了什么：

//本段代码在SocketFrameHandler类中
public void sendHeader(int major, int minor, int revision) throws IOException {
      synchronized (_outputStream) {
          _outputStream.write("AMQP".getBytes("US-ASCII"));
          _outputStream.write(0);
          _outputStream.write(major);
          _outputStream.write(minor);
          _outputStream.write(revision);
          _outputStream.flush();
      }
  }
  public void sendHeader() throws IOException {
      sendHeader(AMQP.PROTOCOL.MAJOR, AMQP.PROTOCOL.MINOR, AMQP.PROTOCOL.REVISION);
  }

上面这段对照着下图一目了然：

---

    // start the main loop going
    MainLoop loop = new MainLoop();
    final String name = "AMQP Connection " + getHostAddress() + ":" + getPort();
    mainLoopThread = Environment.newThread(threadFactory, loop, name);
    mainLoopThread.start();
    // after this point clear-up of MainLoop is triggered by closing the frameHandler.

下面就是最重要的MainLoop线程了。这里先跳过，接下去看看start()方法，之后就是Connection.Start/.StartOk, Connection.Tune/.TuneOk, Connection.Open/.OpenOk的来回negotiation，以及设置channelMax, frameMax和heartbeat的参数值。当然在设置frameMax之前还初始化了ChannelManager，至于ChannelManager可以简单的理解为管理Channel的一个类，具体实现细节可以参考（[[三]RabbitMQ-客户端源码之ChannelManager][RabbitMQ-_ChannelManager]）

    AMQP.Connection.Start connStart = null;
    AMQP.Connection.Tune connTune = null;
    try {
        connStart =
                (AMQP.Connection.Start) connStartBlocker.getReply(HANDSHAKE_TIMEOUT/2).getMethod();

        _serverProperties = Collections.unmodifiableMap(connStart.getServerProperties());

        Version serverVersion =
                new Version(connStart.getVersionMajor(),
                                   connStart.getVersionMinor());

        if (!Version.checkVersion(clientVersion, serverVersion)) {
            throw new ProtocolVersionMismatchException(clientVersion,
                                                              serverVersion);
        }

        String[] mechanisms = connStart.getMechanisms().toString().split(" ");
        SaslMechanism sm = this.saslConfig.getSaslMechanism(mechanisms);
        if (sm == null) {
            throw new IOException("No compatible authentication mechanism found - " +
                                          "server offered [" + connStart.getMechanisms() + "]");
        }

        LongString challenge = null;
        LongString response = sm.handleChallenge(null, this.username, this.password);

        do {
            Method method = (challenge == null)
                                    ? new AMQP.Connection.StartOk.Builder()
                                              .clientProperties(_clientProperties)
                                              .mechanism(sm.getName())
                                              .response(response)
                                              .build()
                                    : new AMQP.Connection.SecureOk.Builder().response(response).build();

            try {
                Method serverResponse = _channel0.rpc(method, HANDSHAKE_TIMEOUT/2).getMethod();
                if (serverResponse instanceof AMQP.Connection.Tune) {
                    connTune = (AMQP.Connection.Tune) serverResponse;
                } else {
                    challenge = ((AMQP.Connection.Secure) serverResponse).getChallenge();
                    response = sm.handleChallenge(challenge, this.username, this.password);
                }
            } catch (ShutdownSignalException e) {
                Method shutdownMethod = e.getReason();
                if (shutdownMethod instanceof AMQP.Connection.Close) {
                    AMQP.Connection.Close shutdownClose = (AMQP.Connection.Close) shutdownMethod;
                    if (shutdownClose.getReplyCode() == AMQP.ACCESS_REFUSED) {
                        throw new AuthenticationFailureException(shutdownClose.getReplyText());
                    }
                }
                throw new PossibleAuthenticationFailureException(e);
            }
        } while (connTune == null);
    } catch (TimeoutException te) {
        _frameHandler.close();
        throw te;
    } catch (ShutdownSignalException sse) {
        _frameHandler.close();
        throw AMQChannel.wrap(sse);
    } catch(IOException ioe) {
        _frameHandler.close();
        throw ioe;
    }

    try {
        int channelMax =
            negotiateChannelMax(this.requestedChannelMax,
                                connTune.getChannelMax());
        _channelManager = instantiateChannelManager(channelMax, threadFactory);

        int frameMax =
            negotiatedMaxValue(this.requestedFrameMax,
                               connTune.getFrameMax());
        this._frameMax = frameMax;

        int heartbeat =
            negotiatedMaxValue(this.requestedHeartbeat,
                               connTune.getHeartbeat());

        setHeartbeat(heartbeat);

        _channel0.transmit(new AMQP.Connection.TuneOk.Builder()
                            .channelMax(channelMax)
                            .frameMax(frameMax)
                            .heartbeat(heartbeat)
                          .build());
        _channel0.exnWrappingRpc(new AMQP.Connection.Open.Builder()
                                  .virtualHost(_virtualHost)
                                .build());
    } catch (IOException ioe) {
        _heartbeatSender.shutdown();
        _frameHandler.close();
        throw ioe;
    } catch (ShutdownSignalException sse) {
        _heartbeatSender.shutdown();
        _frameHandler.close();
        throw AMQChannel.wrap(sse);
    }

    // We can now respond to errors having finished tailoring the connection
    this._inConnectionNegotiation = false;

    return;
}

---

接着回顾MainLoop, 在start()方法中关于MainLoop的代码主要有：

    // start the main loop going
    MainLoop loop = new MainLoop();
    final String name = "AMQP Connection " + getHostAddress() + ":" + getPort();
    mainLoopThread = Environment.newThread(threadFactory, loop, name);
    mainLoopThread.start();
    // after this point clear-up of MainLoop is triggered by closing the frameHandler.

这段代码主要是初始化MainLoop线程对象，然后让其运行。没有什么特别之处，而特别之处在于MainLoop本身。

MainLoop类是AMQConnection类的私有内部类：

private class MainLoop implements Runnable {
    /**
     * Channel reader thread main loop. Reads a frame, and if it is
     * not a heartbeat frame, dispatches it to the channel it refers to.
     * Continues running until the "running" flag is set false by
     * shutdown().
     */
    public void run() {
        try {
            while (_running) {
                Frame frame = _frameHandler.readFrame();

                if (frame != null) {
                    _missedHeartbeats = 0;
                    if (frame.type == AMQP.FRAME_HEARTBEAT) {
                        // Ignore it: we've already just reset the heartbeat counter.
                    } else {
                        if (frame.channel == 0) { // the special channel
                            _channel0.handleFrame(frame);
                        } else {
                            if (isOpen()) {
                                // If we're still _running, but not isOpen(), then we
                                // must be quiescing, which means any inbound frames
                                // for non-zero channels (and any inbound commands on
                                // channel zero that aren't Connection.CloseOk) must
                                // be discarded.
                                ChannelManager cm = _channelManager;
                                if (cm != null) {
                                    cm.getChannel(frame.channel).handleFrame(frame);
                                }
                            }
                        }
                    }
                } else {
                    // Socket timeout waiting for a frame.
                    // Maybe missed heartbeat.
                    handleSocketTimeout();
                }
            }
        } catch (EOFException ex) {
            if (!_brokerInitiatedShutdown)
                shutdown(null, false, ex, true);
        } catch (Throwable ex) {
            _exceptionHandler.handleUnexpectedConnectionDriverException(AMQConnection.this,
                                                                        ex);
            shutdown(null, false, ex, true);
        } finally {
            // Finally, shut down our underlying data connection.
            _frameHandler.close();
            _appContinuation.set(null);
            notifyListeners();
        }
    }
}

MainLoop线程主要用来处理通信帧（Frame，有关Frame的细节将会在（[[四]RabbitMQ-客户端源码之Frame][RabbitMQ-_Frame]）中陈述）的，可以看到当AMQConnection调用start()方法后，_isrunning就设置为true，那么线程一直在运行（while(true)）。

MainLoop线程当读取到通信帧之后，判断是否是心跳帧，如果是则忽略继续监听。如果是其他帧，则判断其frame.channel值是否为0，frame.channel值为0代表的是特殊帧，这些特殊帧是和Connection有关的，而不是和Channel有关的（上面代码里的frame.channel就是Channel里的channel number, 一般Connection类型的帧的channel number为0，而其余Channel类别帧的channel number大于0。）

这里就分channel_number=0和channel_number !=0分别进行处理。
当channel_number=0即frame.channel=0则直接调用_channel0的handleFrame方法。
这个_channel0是在AMQConnection类中创建的私有变量：

private final AMQChannel _channel0 = new AMQChannel(this, 0) {
    @Override public boolean processAsync(Command c) throws IOException {
        return getConnection().processControlCommand(c);
    }
};

调用AMQChannel的handleFrame方法（有关AMQChannel的更多实现细节可以参考：（[[五]RabbitMQ-客户端源码之AMQChannel][RabbitMQ-_AMQChannel]））：

public void handleFrame(Frame frame) throws IOException {
    AMQCommand command = _command;
    if (command.handleFrame(frame)) { // a complete command has rolled off the assembly line
        _command = new AMQCommand(); // prepare for the next one
        handleCompleteInboundCommand(command);
    }
}

对于channel number为0的帧，AMQCommand的handleFrame方法都是返回true.（有关AMQCommand的实现细节可以参考：（[[六]RabbitMQ-客户端源码之AMQCommand][RabbitMQ-_AMQCommand]））
进而调用AMQChannel的handleCompleteInboundCommand(command)方法：

public void handleCompleteInboundCommand(AMQCommand command) throws IOException {
    // First, offer the command to the asynchronous-command
    // handling mechanism, which gets to act as a filter on the
    // incoming command stream.  If processAsync() returns true,
    // the command has been dealt with by the filter and so should
    // not be processed further.  It will return true for
    // asynchronous commands (deliveries/returns/other events),
    // and false for commands that should be passed on to some
    // waiting RPC continuation.
    if (!processAsync(command)) {
        // The filter decided not to handle/consume the command,
        // so it must be some reply to an earlier RPC.
        nextOutstandingRpc().handleCommand(command);
        markRpcFinished();
    }
}

进而调用AMQChannel的processAsync方法。这个方法在AMQChannel类中是一个抽象方法，而观察AMQConnection中的AMQChannel _channel0私有变量其正好实现了这个方法：

/** The special channel 0 (not managed by the_channelManager) */
private final AMQChannel _channel0 = new AMQChannel(this, 0) {
    @Override public boolean processAsync(Command c) throws IOException {
        return getConnection().processControlCommand(c);
    }
};

ChannelN中也实现了processAsync方法。（有关ChannelN的实现细节可以参考：（[[八]RabbitMQ-客户端源码之ChannelN][RabbitMQ-_ChannelN]））

进而调用了AMQConnection的processControlCommand方法：

/**
 * Handles incoming control commands on channel zero.
 * @see ChannelN#processAsync
 */
@SuppressWarnings("unused")
public boolean processControlCommand(Command c) throws IOException
{
    // Similar trick to ChannelN.processAsync used here, except
    // we're interested in whole-connection quiescing.

    // See the detailed comments in ChannelN.processAsync.

    Method method = c.getMethod();

    if (isOpen()) {
        if (method instanceof AMQP.Connection.Close) {
            handleConnectionClose(c);
            return true;
        } else if (method instanceof AMQP.Connection.Blocked) {
            AMQP.Connection.Blocked blocked = (AMQP.Connection.Blocked) method;
            try {
                for (BlockedListener l : this.blockedListeners) {
                    l.handleBlocked(blocked.getReason());
                }
            } catch (Throwable ex) {
                getExceptionHandler().handleBlockedListenerException(this, ex);
            }
            return true;
        } else if (method instanceof AMQP.Connection.Unblocked) {
            try {
                for (BlockedListener l : this.blockedListeners) {
                    l.handleUnblocked();
                }
            } catch (Throwable ex) {
                getExceptionHandler().handleBlockedListenerException(this, ex);
            }
            return true;
        } else {
            return false;
        }
    } else {
        if (method instanceof AMQP.Connection.Close) {
            // Already shutting down, so just send back a CloseOk.
            try {
                _channel0.quiescingTransmit(new AMQP.Connection.CloseOk.Builder().build());
            } catch (IOException _e) { } // ignore
            return true;
        } else if (method instanceof AMQP.Connection.CloseOk) {
            // It's our final "RPC". Time to shut down.
            _running = false;
            // If Close was sent from within the MainLoop we
            // will not have a continuation to return to, so
            // we treat this as processed in that case.
            return !_channel0.isOutstandingRpc();
        } else { // Ignore all others.
            return true;
        }
    }
}

这个方法是用来处理AMQP控制命令的：Connection.Close/CloseOk, Connection.Blocked/.Unblocked。正常情况下（比如Connection.Start/.StartOk）直接返回false。

这样就会运行到 nextOutstandingRpc().handleCommand(command);这句代码，意思就是将从broker接受到的AMQCommand对象存入RpcContinuation对象，确切的来说是SimpleBlockingRpcContinuation这个对象中，更确切的来说是存放到容量为1的BlockingQueue中，等待其余的线程来“take()”。有关RpcContinuation或者SimpleBlockingRpcContinuation细节可以参考：[[五]RabbitMQ-客户端源码之AMQChannel][RabbitMQ-_AMQChannel]。

我们假设有一个可靠的面向流的网络传输层（TCP/IP或相当）。在单个套接字连接中，可以存在多个独立控制线程，这些称之为通道。每个帧都使用通道编号来编号。通过交织他们的帧，不同的通道共享连接。对于给定的通道，帧运行在一个严格的序列，这样可以用来驱动一个协议解析器（通常是一个状态机）。

当channel_number!=0则需要从ChannelManager中根据channel number找出相应的AMQChannel再调用handleFrame方法处理。
这里的ChannelManager从何而来？
这里就还是要到AMQChannel的start()方法来看，有这么一句：_channelManager = instantiateChannelManager(channelMax, threadFactory);

//AMQConnection类中
protected ChannelManager instantiateChannelManager(int channelMax, ThreadFactory threadFactory) {
    return new ChannelManager(this._workService, channelMax, threadFactory);
}

//ChannelManager的构造方法
public ChannelManager(ConsumerWorkService workService, int channelMax, ThreadFactory threadFactory) {
    if (channelMax == 0) {
        // The framing encoding only allows for unsigned 16-bit integers
        // for the channel number
        channelMax = (1 << 16) - 1;
    }
    _channelMax = channelMax;
    channelNumberAllocator = new IntAllocator(1, channelMax);

    this.workService = workService;
    this.threadFactory = threadFactory;
}

ChannelManager构造方法中的ConsumerWorkService参数就是AMQConnection中start()方法第一行代码初始化的ConsumerWorkService对象。

有关ChannelManager的实现细节可以参考：（[[三]RabbitMQ-客户端源码之ChannelManager][RabbitMQ-_ChannelManager]）

当channel number等于0的时候是调用AMQChannel，也可以说是AQMConnection的内部成员变量AMQChannel _channel0来处理。

当channel number不等于0时，这个接下去的处理就要涉及到整个RabbitMQ-Client代码最核心的类——ChannelN。可以类别上上面channel number为0的情况，具体可以参考：[八]RabbitMQ-客户端源码之ChannelN。