Modbus 串口 C#

前言

Modbus是一种串行通信协议，是Modicon公司（现在的施耐德电气 Schneider Electric）于1979年为使用可编程逻辑控制器（PLC）通信而发表。Modbus已经成为工业领域通信协议的业界标准（De facto），并且现在是工业电子设备之间常用的连接方式。

Modbus允许多个 (大约240个) 设备连接在同一个网络上进行通信，举个例子，一个测量温度和湿度的装置，并且将结果发送给计算机。在数据采集与监视控制系统（SCADA）中，Modbus通常用来连接监控计算机和远程终端控制系统（RTU）。

常用用法

通讯格式

以功能码03为例

C#实验常用的03,06,10

 public class Modbus
    {
        protected SerialPort port;
        public Modbus(SerialPort serialPort)
        {
            this.port = serialPort;
        }

        public void OpenPort()
        {
            try
            {
                if (!port.IsOpen)
                {
                    port.Open();
                }
                port.DiscardInBuffer();
                port.DiscardOutBuffer();
            }
            catch (Exception ex)
            {
            }
        }

        public void ClosePort()
        {
            try
            {
                if (port != null && port.IsOpen)
                {
                    port.Close();
                    port = null;
                }
            }
            catch (Exception ex)
            {
            }
        }

        protected int ReadData(byte[] buffer, int expectCount = 0)
        {
            int r = port.Read(buffer, 0, buffer.Length);
            while (port.BytesToRead > 0)
            {
                int n = port.Read(buffer, r, buffer.Length - r);
                r += n;
            }
            while (r < expectCount)
            {
                r += port.Read(buffer, r, buffer.Length - r);
            }       
            return r;
        }

        /// 

        /// 读取保持型寄存器 功能码03
        /// 
        /// 站号
        /// 寄存器地址
        /// 寄存器数量
        /// 接收数据的缓存
        /// 收到的字节数
        public int ReadRegister(int stationID, ushort addr, int length, byte[] buffer)
        {
            OpenPort();
            byte[] cmdHead = new byte[6];
            cmdHead[0] = (byte)stationID;
            cmdHead[1] = 0x03;
            cmdHead[2] = (byte)((addr >> 8) & 0xFF);
            cmdHead[3] = (byte)(addr & 0xFF);
            cmdHead[4] = (byte)((length >> 8) & 0xFF);
            cmdHead[5] = (byte)(length & 0xFF);
            byte[] command = CRC.AppendCRC16(cmdHead);
            //发送指令
            port.Write(command, 0, command.Length);
            int bytes = ReadData(buffer, 5 + 2 * length);
            return bytes;
        }


        /// 

        /// 写入保持型寄存器 功能码06
        /// 
        /// 站号
        /// 寄存器地址
        /// 写入值
        /// 
        public int WriteRegister(int stationID, ushort addr, int value, byte[] buffer = null)
        {
            OpenPort();
            byte[] cmdHead = new byte[6];
            cmdHead[0] = (byte)stationID;
            cmdHead[1] = 0x06;
            cmdHead[2] = (byte)((addr >> 8) & 0xFF);
            cmdHead[3] = (byte)(addr & 0xFF);
            cmdHead[4] = (byte)((value >> 8) & 0xFF);
            cmdHead[5] = (byte)(value & 0xFF);
            byte[] command = CRC.AppendCRC16(cmdHead);

            //发送指令。
            port.Write(command, 0, command.Length);
            if (buffer != null)
            {
                int bytes = ReadData(buffer, 8);
                return bytes;
            }
            return 0;
        }

        /// 

        /// 写入一段连续的寄存器 功能码10
        /// 
        /// 站号
        /// 寄存器地址
        /// 写入值
        /// 
        public int WriteRegisters(int stationID, ushort addr, byte[] value, byte[] buffer = null)
        {
            OpenPort();
            int registerCount = value.Length / 2;
            byte[] cmdHead = new byte[7 + value.Length];
            cmdHead[0] = (byte)stationID;
            cmdHead[1] = 0x10;
            cmdHead[2] = (byte)((addr >> 8) & 0xFF);
            cmdHead[3] = (byte)(addr & 0xFF);
            cmdHead[4] = (byte)((registerCount >> 8) & 0xFF);
            cmdHead[5] = (byte)(registerCount & 0xFF);
            cmdHead[6] = (byte)(value.Length & 0xFF);
            for (int i = 0; i < value.Length; i++)
            {
                cmdHead[7 + i] = value[i];
            }
            byte[] command = CRC.AppendCRC16(cmdHead);

            //发送指令。
            port.Write(command, 0, command.Length);
            if (buffer != null)
            {
                int bytes = ReadData(buffer, 8);
                return bytes;
            }
            return 0;
        }

长期分享工控干货，喜欢的话可以点赞关注，谢谢！