【NodeJS】GLIBC_2.28 not found CentOS7不兼容Node高版本

前言

CentOS 7环境下安装 Nvm，在执行nvm use 18.17.0后执行node -v爆出如下错误

node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node)
node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by node)

其实这本质上并不是 Nvm 的问题，而是CentOS低版本系统的 GLIBC 版本过低，我们再查看 ldd 版本

# ldd --version
ldd (GNU libc) 2.17
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.

我们发现系统中 GLIBC 版本仅为 17，而报错中显示我们缺失，25，27，28。而 GLIBC是向下兼容的，安装高版本的同时会安装低版本，所以我们只需要安装 GLIBC_2.28 即可

注意：如果有条件的话可以直接升级系统 CentOS 8，可以有效解决问题

解决方案

更新 glibc

cd
wget http://ftp.gnu.org/gnu/glibc/glibc-2.28.tar.gz
tar xf glibc-2.28.tar.gz 
cd glibc-2.28/ && mkdir build  && cd build

升级 gcc、make

# 升级GCC(默认为4 升级为8)
yum install -y centos-release-scl
yum install -y devtoolset-8-gcc*
mv /usr/bin/gcc /usr/bin/gcc-4.8.5
ln -s /opt/rh/devtoolset-8/root/bin/gcc /usr/bin/gcc
mv /usr/bin/g++ /usr/bin/g++-4.8.5
ln -s /opt/rh/devtoolset-8/root/bin/g++ /usr/bin/g++

# 升级 make(默认为3 升级为4)
wget http://ftp.gnu.org/gnu/make/make-4.3.tar.gz
tar -xzvf make-4.3.tar.gz && cd make-4.3/
./configure  --prefix=/usr/local/make
make && make install
cd /usr/bin/ && mv make make.bak
ln -sv /usr/local/make/bin/make /usr/bin/make

升级 libstdc++

cd ~/glibc-2.28/build

make all
yum whatprovides libstdc++.so.6
yum update -y libstdc++.x86_64

sudo wget http://www.vuln.cn/wp-content/uploads/2019/08/libstdc.so_.6.0.26.zip
unzip libstdc.so_.6.0.26.zip
cp libstdc++.so.6.0.26 /lib64/
cd /lib64

# 把原来的命令做备份
cp libstdc++.so.6 libstdc++.so.6.bak
rm -f libstdc++.so.6

# 重新链接
ln -s libstdc++.so.6.0.26 libstdc++.so.6

编译安装

cd ~/glibc-2.28/build
# 配置环境
../configure --prefix=/usr --disable-profile --enable-add-ons --with-headers=/usr/include --with-binutils=/usr/bin
# 安装
make
make install

查看版本

lld

(base) [root@VM-4-3-centos build]# ldd --version
ldd (GNU libc) 2.28
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.

node

(base) [root@VM-4-3-centos build]# node -v
v18.17.0

参考文章

OSError: /lib64/libm.so.6: version `GLIBC_2.27’ not found (required by xxx.so) ——升级GLIBC并解决系统错误 - 知乎 (zhihu.com)

解决nvm升级node v18.14.0时/lib64/libm.so.6: version ‘GLIBC_2.27’ not found (required by node)问题 - jiayou111 - 博客园 (cnblogs.com)

本文由博客一文多发平台 OpenWrite 发布！