syncProxyRule 同步配置与规则
proxier.syncProxyRules() 实现监听svc或ep更新配置到iptables规则的一致性同步机制功能，这也是iptables proxer最核心的逻辑代码。作者实现是利用了iptables-save/iptables-restore机制将现存的iptables配置和服务与端点同步的信息来生成相对应的iptables链与规则数据，每次同步执行写入可restore标准格式的规则数据后通过iptables-restore命令进行重设iptables规则。
这个同步规则处理代码比较长，我们后面将分解成小块来讲解。下面为syncProxyRules(部分已解析注释替代)代码框架说明，内注释的每块内容在后面都将有单独代码分析说明。
!FILENAME pkg/proxy/iptables/proxier.go:634
func (proxier *Proxier) syncProxyRules() {
proxier.mu.Lock()
defer proxier.mu.Unlock()
start := time.Now()
defer func() {
metrics.SyncProxyRulesLatency.Observe(metrics.SinceInMicroseconds(start))
klog.V(4).Infof("syncProxyRules took %v", time.Since(start))
}()
// don't sync rules till we've received services and endpoints
if !proxier.endpointsSynced || !proxier.servicesSynced {
klog.V(2).Info("Not syncing iptables until Services and Endpoints have been received from master")
return
}
// 检测与更新变化(service/endpoints)
//...
// 创建与联接kube链
//...
// 获取现存在的Filter/Nat表链数据
//...
// 创建iptables-save/restore格式数据（表头、链）
//...
// 写kubernets特有的SNAT地址伪装规则
//...
// Accumulate NAT chains to keep.
activeNATChains := map[utiliptables.Chain]bool{}
// Accumulate the set of local ports that we will be holding open once this update is complete
replacementPortsMap := map[utilproxy.LocalPort]utilproxy.Closeable{}
endpoints := make([]*endpointsInfo, 0)
endpointChains := make([]utiliptables.Chain, 0)
args := make([]string, 64)
// Compute total number of endpoint chains across all services.
proxier.endpointChainsNumber = 0
for svcName := range proxier.serviceMap {
proxier.endpointChainsNumber += len(proxier.endpointsMap[svcName])
}
// 为个"服务"创建rules（service portal规则的创建）
for svcName, svc := range proxier.serviceMap {
//...
}
// 删除不再使用的链
//...
// nodeports链
//...
// FORWARD策略
//...
// 配置clusterCIDR规则
//...
// 写结整标签
//...
//汇集与iptables-restore加载数据
//...
// 关闭过旧的本地端口，更新portmap数据
for k, v := range proxier.portsMap {
if replacementPortsMap[k] == nil {
v.Close()
}
}
proxier.portsMap = replacementPortsMap
// 更新healthz timestamp.
if proxier.healthzServer != nil {
proxier.healthzServer.UpdateTimestamp()
}
// 更新healthchecks.
if err := proxier.healthChecker.SyncServices(serviceUpdateResult.HCServiceNodePorts); err != nil {
klog.Errorf("Error syncing healthcheck services: %v", err)
}
if err := proxier.healthChecker.SyncEndpoints(endpointUpdateResult.HCEndpointsLocalIPSize); err != nil {
klog.Errorf("Error syncing healthcheck endpoints: %v", err)
}
// 完成清理工作
for _, svcIP := range staleServices.UnsortedList() {
if err := conntrack.ClearEntriesForIP(proxier.exec, svcIP, v1.ProtocolUDP); err != nil {
klog.Errorf("Failed to delete stale service IP %s connections, error: %v", svcIP, err)
}
}
proxier.deleteEndpointConnections(endpointUpdateResult.StaleEndpoints)
}
下面将分解详述每块代码逻辑:
更新 service 和 endpoints ;返回更新结果
!FILENAME pkg/proxy/iptables/proxier.go:652
//更新SVC/EP
serviceUpdateResult := proxy.UpdateServiceMap(proxier.serviceMap, proxier.serviceChanges)
endpointUpdateResult := proxy.UpdateEndpointsMap(proxier.endpointsMap, proxier.endpointsChanges)
staleServices := serviceUpdateResult.UDPStaleClusterIP
// 从EndpointsMap更新结果返回中合并UDP协议废弃服务信息
for _, svcPortName := range endpointUpdateResult.StaleServiceNames {
if svcInfo, ok := proxier.serviceMap[svcPortName]; ok && svcInfo != nil && svcInfo.GetProtocol() == v1.ProtocolUDP {
klog.V(2).Infof("Stale udp service %v -> %s", svcPortName, svcInfo.ClusterIPString())
staleServices.Insert(svcInfo.ClusterIPString())
}
}
UpdateServiceMap() SVC 服务的更新实现
!FILENAME pkg/proxy/service.go:212
func UpdateServiceMap(serviceMap ServiceMap, changes *ServiceChangeTracker) (result UpdateServiceMapResult) {
result.UDPStaleClusterIP = sets.NewString() // 已废弃的UDP端口
serviceMap.apply(changes, result.UDPStaleClusterIP) // 应用更新map->
result.HCServiceNodePorts = make(map[types.NamespacedName]uint16)
for svcPortName, info := range serviceMap {
if info.GetHealthCheckNodePort() != 0 {
result.HCServiceNodePorts[svcPortName.NamespacedName] = uint16(info.GetHealthCheckNodePort()) //健康检测的node Port
}
}
return result
}
**serviceMap.apply() **应用更新变化事件的服务项(merge->filter->unmerge)
!FILENAME pkg/proxy/service.go:268
func (serviceMap *ServiceMap) apply(changes *ServiceChangeTracker, UDPStaleClusterIP sets.String) {
changes.lock.Lock()
defer changes.lock.Unlock()
for _, change := range changes.items {
serviceMap.merge(change.current) //合并变更增加项到serviceMap ①
change.previous.filter(change.current) //过滤掉已处理更新变化的项，跳过unmerge处理 ②
serviceMap.unmerge(change.previous, UDPStaleClusterIP) //删除废弃的项 ③
}
// clear changes after applying them to ServiceMap.
changes.items = make(map[types.NamespacedName]*serviceChange)
return
}
① serviceMap.merge() 合并增加"other“内容到当前的serviceMap内。"即将变化的服务列表进行合并”。
!FILENAME pkg/proxy/service.go:301
func (sm *ServiceMap) merge(other ServiceMap) sets.String {
existingPorts := sets.NewString()
for svcPortName, info := range other {
existingPorts.Insert(svcPortName.String())
_, exists := (*sm)[svcPortName]
//...
(*sm)[svcPortName] = info
}
return existingPorts
}
② serviceMap.unmerge() 从当前map移除"other"存在的内容项。"即删除废弃的项"
!FILENAME pkg/proxy/service.go:330
func (sm *ServiceMap) unmerge(other ServiceMap, UDPStaleClusterIP sets.String) {
for svcPortName := range other {
info, exists := (*sm)[svcPortName]
if exists {
if info.GetProtocol() == v1.ProtocolUDP {
UDPStaleClusterIP.Insert(info.ClusterIPString()) //存储已废丢UDP服务的集群IP列表
}
delete(*sm, svcPortName)
} //...
}
}
③ serviceMap.filter() 基于"other"给定的服务端口名(key值)，过滤掉存在于serviceMap的项
!FILENAME pkg/proxy/service.go:319
func (sm *ServiceMap) filter(other ServiceMap) {
for svcPortName := range *sm {
if _, ok := other[svcPortName]; ok {
delete(*sm, svcPortName)
}
}
}
UpdateEndpointsMap() 端点更新的实现
!FILENAME pkg/proxy/endpoints.go:163
func UpdateEndpointsMap(endpointsMap EndpointsMap, changes *EndpointChangeTracker) (result UpdateEndpointMapResult) {
result.StaleEndpoints = make([]ServiceEndpoint, 0)
result.StaleServiceNames = make([]ServicePortName, 0)
endpointsMap.apply(changes, &result.StaleEndpoints, &result.StaleServiceNames)
// TODO: If this will appear to be computationally expensive, consider
// computing this incrementally similarly to endpointsMap.
result.HCEndpointsLocalIPSize = make(map[types.NamespacedName]int)
localIPs := GetLocalEndpointIPs(endpointsMap)
for nsn, ips := range localIPs {
result.HCEndpointsLocalIPSize[nsn] = len(ips)
}
return result
}
EndpointsMap.apply() 应用更新变化事件的端点项(merge->unmerge)
!FILENAME pkg/proxy/endpoints.go:242
func (endpointsMap EndpointsMap) apply(changes *EndpointChangeTracker, staleEndpoints *[]ServiceEndpoint, staleServiceNames *[]ServicePortName) {
if changes == nil {
return
}
changes.lock.Lock()
defer changes.lock.Unlock()
for _, change := range changes.items {
endpointsMap.Unmerge(change.previous) // 删除 ①
endpointsMap.Merge(change.current) // 更新 ②
detectStaleConnections(change.previous, change.current, staleEndpoints, staleServiceNames) //废弃查找 ③
}
changes.items = make(map[types.NamespacedName]*endpointsChange)
}
① EndpointsMap.Merge() 将"other"内指定项的值(端点列表)更新至EndpointMap
!FILENAME pkg/proxy/endpoints.go:259
func (em EndpointsMap) Merge(other EndpointsMap) {
for svcPortName := range other {
em[svcPortName] = other[svcPortName]
}
}
② EndpointsMap.Unmerge() 删除"other"内指定项
!FILENAME pkg/proxy/endpoints.go:266
func (em EndpointsMap) Unmerge(other EndpointsMap) {
for svcPortName := range other {
delete(em, svcPortName)
}
}
③ EndpointsMap.detectStaleConnections() 查找废弃后端连接信息项
!FILENAME pkg/proxy/endpoints.go:291
func detectStaleConnections(oldEndpointsMap, newEndpointsMap EndpointsMap, staleEndpoints *[]ServiceEndpoint, staleServiceNames *[]ServicePortName) {
for svcPortName, epList := range oldEndpointsMap {
for _, ep := range epList {
stale := true
for i := range newEndpointsMap[svcPortName] {
if newEndpointsMap[svcPortName][i].Equal(ep) { //存在则stale为否
stale = false
break
}
}
if stale {
klog.V(4).Infof("Stale endpoint %v -> %v", svcPortName, ep.String())
*staleEndpoints = append(*staleEndpoints, ServiceEndpoint{Endpoint: ep.String(), ServicePortName: svcPortName}) //存储废弃的endpoint列表
}
}
}
for svcPortName, epList := range newEndpointsMap {
//对于UDP服务，如果后端变化从0至非0，可能存在conntrack项将服务的流量黑洞
if len(epList) > 0 && len(oldEndpointsMap[svcPortName]) == 0 {
*staleServiceNames = append(*staleServiceNames, svcPortName)
//存储废弃的服务名列表
}
}
}
创建与联接 kube 链
filter表中INPUT链头部插入自定义链调转到KUBE-EXTERNAL-SERVICES链
iptables -I "INPUT" -t "filter" -m "conntrack" --ctstate "NEW" -m comment --comment "kubernetes externally-visible service portals" -j "KUBE-EXTERNAL-SERVICES"filter表中OUTPUT链头部插入自定义链调转到KUBE-SERVICE链
iptables -I "OUTPUT" -t "filter" -m "conntrack" --ctstate "NEW" -m comment --comment "kubernetes service portals" -j "KUBE-SERVICES"nat表中OUTPUT链头部插入自定义链调转到KUBE-SERVICES链
iptables -I "OUTPUT" -t "nat" -m comment --comment "kubernetes service portals" -j "KUBE-SERVICES"nat表中PREROUTING链头部插入自定义链调转到KUBE-SERVICES链
iptables -I "PREROUTING" -t "nat" -m comment --comment "kubernetes service portals" -j "KUBE-SERVICES"nat表中POSTROUTING链头部插入自定义链调转到KUBE-POSTROUTING链
iptables -I "POSTROUTING" -t "nat" -m comment --comment "kubernetes postrouting rules" -j "KUBE-POSTROUTING"filter表中FORWARD链头部插入自定义链调转到KUBE-FORWARD链
iptables -I "FORWARD" -t "filter" -m comment --comment "kubernetes forwarding rules" -j "KUBE-FORWARD"
!FILENAME pkg/proxy/iptables/proxier.go:667
//循环iptablesJumpChains定义
for _, chain := range iptablesJumpChains {
//底层命令iptables -t $tableName -N $chainName
if _, err := proxier.iptables.EnsureChain(chain.table, chain.chain); err != nil {
klog.Errorf("Failed to ensure that %s chain %s exists: %v", chain.table, kubeServicesChain, err)
return
}
args := append(chain.extraArgs,
"-m", "comment", "--comment", chain.comment,
"-j", string(chain.chain),
)
//底层命令iptables -I $chainName -t $tableName -m comment --comment $comment -j $chain
if _, err := proxier.iptables.EnsureRule(utiliptables.Prepend, chain.table, chain.sourceChain, args...); err != nil {
klog.Errorf("Failed to ensure that %s chain %s jumps to %s: %v", chain.table, chain.sourceChain, chain.chain, err)
return
}
}
创建 Iptables 基础数据
- 获取现存在的Filter/Nat表链数据
- 创建iptables-save/restore格式数据（表头、链）
- 创建SNAT地址伪装规则
!FILENAME pkg/proxy/iptables/proxier.go:688
//现存在的filter表链获取
existingFilterChains := make(map[utiliptables.Chain][]byte)
proxier.existingFilterChainsData.Reset()
err := proxier.iptables.SaveInto(utiliptables.TableFilter, proxier.existingFilterChainsData) //通过iptables-save方式来获取
if err != nil {
klog.Errorf("Failed to execute iptables-save, syncing all rules: %v", err)
} else {
existingFilterChains = utiliptables.GetChainLines(utiliptables.TableFilter, proxier.existingFilterChainsData.Bytes()) //输出结果
}
//同上，现存在的nat表链获取
existingNATChains := make(map[utiliptables.Chain][]byte)
proxier.iptablesData.Reset()
err = proxier.iptables.SaveInto(utiliptables.TableNAT, proxier.iptablesData)
if err != nil {
klog.Errorf("Failed to execute iptables-save, syncing all rules: %v", err)
} else {
existingNATChains = utiliptables.GetChainLines(utiliptables.TableNAT, proxier.iptablesData.Bytes())
}
// Reset all buffers used later.
// This is to avoid memory reallocations and thus improve performance.
proxier.filterChains.Reset()
proxier.filterRules.Reset()
proxier.natChains.Reset()
proxier.natRules.Reset()
// 写表头
writeLine(proxier.filterChains, "*filter")
writeLine(proxier.natChains, "*nat")
写链数据
fileter: "KUBE-SERVICES" / "KUBE-EXTERNAL-SERVICES"/ "KUBE-FORWARD"
nat: "KUBE-SERVICES" / "KUBE-NODEPORTS" / "KUBE-POSTROUTING" / "KUBE-MARK-MASQ"
!FILENAME pkg/proxy/iptables/proxier.go:720
// 写chain链数据,将filter和Nat相关链格式化存放buffer
for _, chainName := range []utiliptables.Chain{kubeServicesChain, kubeExternalServicesChain, kubeForwardChain} {
if chain, ok := existingFilterChains[chainName]; ok {
writeBytesLine(proxier.filterChains, chain)
} else {
// iptables-save/restore格式的链行":$chainName - [0:0]"
writeLine(proxier.filterChains, utiliptables.MakeChainLine(chainName))
}
}
for _, chainName := range []utiliptables.Chain{kubeServicesChain, kubeNodePortsChain, kubePostroutingChain, KubeMarkMasqChain} {
if chain, ok := existingNATChains[chainName]; ok {
writeBytesLine(proxier.natChains, chain)
} else {
writeLine(proxier.natChains, utiliptables.MakeChainLine(chainName))
}
}
写地址伪装规则，在POSTROUTING阶段对地址进行MASQUERADE（基于接口动态IP的SNAT）处理，原始请求源IP将被丢失，被请求POD的应用看到为NodeIP或CNI设备IP(bridge/vxlan设备)
!FILENAME pkg/proxy/iptables/proxier.go:738
// 写kubernets特有的SNAT地址伪装规则
// -A KUBE-POSTROUTING -m comment --comment "kubernetes service traffic requiring SNAT" -m mark --mark 0x4000/0x4000 -j MASQUERADE
writeLine(proxier.natRules, []string{
"-A", string(kubePostroutingChain),
"-m", "comment", "--comment", `"kubernetes service traffic requiring SNAT"`,
"-m", "mark", "--mark", proxier.masqueradeMark,
"-j", "MASQUERADE",
}...)
//-A KUBE-MARK-MASQ -j MARK --set-xmark 0x4000/0x4000
writeLine(proxier.natRules, []string{
"-A", string(KubeMarkMasqChain),
"-j", "MARK", "--set-xmark", proxier.masqueradeMark,
}...)
为每个 service 创建 rules
先了解serviceInfo的完整定义说明
!FILENAME pkg/proxy/iptables/proxier.go:141
type serviceInfo struct {
*proxy.BaseServiceInfo
// The following fields are computed and stored for performance reasons.
serviceNameString string
servicePortChainName utiliptables.Chain // KUBE-SVC-XXXX16BitXXXX 服务链
serviceFirewallChainName utiliptables.Chain // KUBE-FW-XXXX16BitXXXX Firewall链
serviceLBChainName utiliptables.Chain // KUBE-XLB-XXXX16BitXXXX SLB链
}
type BaseServiceInfo struct {
ClusterIP net.IP //PortalIP(VIP)
Port int //portal端口
Protocol v1.Protocol //协议
NodePort int //node节点端口
LoadBalancerStatus v1.LoadBalancerStatus //LB Ingress
SessionAffinityType v1.ServiceAffinity //会话保持
StickyMaxAgeSeconds int //保持最大时长
ExternalIPs []string //ExternalIPs（指定的node上监听端口）
LoadBalancerSourceRanges []string //过滤源地址流量
HealthCheckNodePort int //HealthCheck检测端口
OnlyNodeLocalEndpoints bool
}
为每个服务创建服务"KUBE-SVC-XXX…"和外部负载均衡"KUBE-XLB-XXX…"链
!FILENAME pkg/proxy/iptables/proxier.go:791
svcChain := svcInfo.servicePortChainName //"KUBE-SVC-XXX..."
if hasEndpoints {
// Create the per-service chain, retaining counters if possible.
if chain, ok := existingNATChains[svcChain]; ok {
writeBytesLine(proxier.natChains, chain)
} else {
writeLine(proxier.natChains, utiliptables.MakeChainLine(svcChain))
}
activeNATChains[svcChain] = true
}
svcXlbChain := svcInfo.serviceLBChainName // "KUBE-XLB-XXX…"
if svcInfo.OnlyNodeLocalEndpoints {
// Only for services request OnlyLocal traffic
// create the per-service LB chain, retaining counters if possible.
if lbChain, ok := existingNATChains[svcXlbChain]; ok {
writeBytesLine(proxier.natChains, lbChain)
} else {
writeLine(proxier.natChains, utiliptables.MakeChainLine(svcXlbChain))
}
activeNATChains[svcXlbChain] = true
}
clusterIP流量的匹配，clusterIP为默认方式，仅资源集群内可访问。
!FILENAME pkg/proxy/iptables/proxier.go:815
//存在端点，写规则
if hasEndpoints {
args = append(args[:0],
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s cluster IP"`, svcNameString),
"-m", protocol, "-p", protocol,
"-d", utilproxy.ToCIDR(svcInfo.ClusterIP),
"--dport", strconv.Itoa(svcInfo.Port),
)
// proxier配置masqueradeAll
// -A KUBE-SERVICES -m comment --comment "..." -m $prot -p $prot -d $clusterIP \
// --dport $port -j KUBE-MARK-MASQ
if proxier.masqueradeAll {
writeLine(proxier.natRules, append(args, "-j", string(KubeMarkMasqChain))...)
} else if len(proxier.clusterCIDR) > 0 {
// proxier配置clusterCIDR情况：
// -A KUBE-SERVICES ! -s $clusterCIDR -m comment --comment "..." -m $prot \
// -p $prot -d $clusterIP --dport $port -j KUBE-MARK-MASQ
writeLine(proxier.natRules, append(args, "! -s", proxier.clusterCIDR, "-j", string(KubeMarkMasqChain))...)
}
// -A KUBE-SERVICES -m comment --comment "..." -m $prot -p $prot -d $clusterIP \
// --dport $port -j KUBE-SVC-XXXX16bitXXXX
writeLine(proxier.natRules, append(args, "-j", string(svcChain))...)
} else {
// 无Endpoints的情况，则创建REJECT规则
// -A KUBE-SERVICES -m comment --comment $svcName -m $prot -p $prot -d $clusterIP \
// --dport $port -j REJECT
writeLine(proxier.filterRules,
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s has no endpoints"`, svcNameString),
"-m", protocol, "-p", protocol,
"-d", utilproxy.ToCIDR(svcInfo.ClusterIP),
"--dport", strconv.Itoa(svcInfo.Port),
"-j", "REJECT",
)
}
服务是否启用ExternalIPs(指定的node上开启监听端口)
!FILENAME pkg/proxy/iptables/proxier.go:846
for _, externalIP := range svcInfo.ExternalIPs {
// 判断externalIP是否为本node的IP以及协议为SCTP，且端口是否已开启
// 如果未开启则在本地打开监听端口
if local, err := utilproxy.IsLocalIP(externalIP); err != nil {
klog.Errorf("can't determine if IP is local, assuming not: %v", err)
} else if local && (svcInfo.GetProtocol() != v1.ProtocolSCTP) {
lp := utilproxy.LocalPort{
Description: "externalIP for " + svcNameString,
IP: externalIP,
Port: svcInfo.Port,
Protocol: protocol,
}
if proxier.portsMap[lp] != nil {
klog.V(4).Infof("Port %s was open before and is still needed", lp.String())
replacementPortsMap[lp] = proxier.portsMap[lp]
} else {
//打开与监听本地端口
socket, err := proxier.portMapper.OpenLocalPort(&lp)
if err != nil {
msg := fmt.Sprintf("can't open %s, skipping this externalIP: %v", lp.String(), err)
proxier.recorder.Eventf(
&v1.ObjectReference{
Kind: "Node",
Name: proxier.hostname,
UID: types.UID(proxier.hostname),
Namespace: "",
}, v1.EventTypeWarning, err.Error(), msg)
klog.Error(msg)
continue
}
replacementPortsMap[lp] = socket
}
}
//存在端点，写规则
if hasEndpoints {
args = append(args[:0],
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s external IP"`, svcNameString),
"-m", protocol, "-p", protocol,
"-d", utilproxy.ToCIDR(net.ParseIP(externalIP)),
"--dport", strconv.Itoa(svcInfo.Port),
)
// -A KUBE-EXTERNAL-SERVICES -m comment --comment "..." -m $prot -p $prot -d \
// $externalIP --dport $port -j KUBE-MARK-MASQ
writeLine(proxier.natRules, append(args, "-j", string(KubeMarkMasqChain))...)
// -A KUBE-EXTERNAL-SERVICES -m comment --comment "..." -m $prot -p $prot -d \
// $externalIP --dport $port -m physdev ! --physdev-is-in \
// -m addrtype ! --src-type Local -j KUBE-SVC-XXXX16bitXXXXX
externalTrafficOnlyArgs := append(args,
"-m", "physdev", "!", "--physdev-is-in",
"-m", "addrtype", "!", "--src-type", "LOCAL")
writeLine(proxier.natRules, append(externalTrafficOnlyArgs, "-j", string(svcChain))...)
dstLocalOnlyArgs := append(args, "-m", "addrtype", "--dst-type", "LOCAL")
// -A KUBE-EXTERNAL-SERVICES -m comment --comment "..." -m $prot -p $prot -d \
// $externalIP --dport $port -m addrtype --dst-type Local
// -j KUBE-SVC-XXXX16bitXXXXX
writeLine(proxier.natRules, append(dstLocalOnlyArgs, "-j", string(svcChain))...)
} else {
// 不存在端点信息则reject
// -A KUBE-EXTERNAL-SERVICES -m comment --comment "..." -m $prot -p $prot -d \
// $externalIP --dport $port -j REJECT
writeLine(proxier.filterRules,
"-A", string(kubeExternalServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s has no endpoints"`, svcNameString),
"-m", protocol, "-p", protocol,
"-d", utilproxy.ToCIDR(net.ParseIP(externalIP)),
"--dport", strconv.Itoa(svcInfo.Port),
"-j", "REJECT",
)
}
}
服务是否启用了外部负载均衡服务load-balancer ingress
!FILENAME pkg/proxy/iptables/proxier.go:917
//存在端点，写规则
if hasEndpoints {
fwChain := svcInfo.serviceFirewallChainName //"KUBE-FW-XXXX16bitXXXXX"
for _, ingress := range svcInfo.LoadBalancerStatus.Ingress {
if ingress.IP != "" {
// 创建服务KUBE-FW-X链
if chain, ok := existingNATChains[fwChain]; ok {
writeBytesLine(proxier.natChains, chain)
} else { //原来不存在则新建
writeLine(proxier.natChains, utiliptables.MakeChainLine(fwChain))
}
activeNATChains[fwChain] = true
// The service firewall rules are created based on ServiceSpec.loadBalancerSourceRanges field.
// This currently works for loadbalancers that preserves source ips.
// For loadbalancers which direct traffic to service NodePort, the firewall rules will not apply.
args = append(args[:0],
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s loadbalancer IP"`, svcNameString),
"-m", protocol, "-p", protocol,
"-d", utilproxy.ToCIDR(net.ParseIP(ingress.IP)),
"--dport", strconv.Itoa(svcInfo.Port),
)
// -A KUBE-SERVICES -m comment --comment "..." -m $prot -p $prot -d \
// $ingresIP --dport $port -j KUBE-FW-XXXX16bitXXXXX
writeLine(proxier.natRules, append(args, "-j", string(fwChain))...)
args = append(args[:0],
"-A", string(fwChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s loadbalancer IP"`, svcNameString),
)
// 在KUBE-FW链，每个源匹配规则可能跳转至一个SVC或XLB链
chosenChain := svcXlbChain
// If we are proxying globally, we need to masquerade in case we cross nodes.
// If we are proxying only locally, we can retain the source IP.
if !svcInfo.OnlyNodeLocalEndpoints {
// -j "KUBE-MARK-MASQ" 地址伪装实现跨主机访问
writeLine(proxier.natRules, append(args, "-j", string(KubeMarkMasqChain))...)
chosenChain = svcChain // 选择为SVC链
}
if len(svcInfo.LoadBalancerSourceRanges) == 0 {
// 允许所有源，直接跳转
writeLine(proxier.natRules, append(args, "-j", string(chosenChain))...)
} else {
// 基于source range配置过滤 "-s $srcRanges"
allowFromNode := false
for _, src := range svcInfo.LoadBalancerSourceRanges {
writeLine(proxier.natRules, append(args, "-s", src, "-j", string(chosenChain))...)
_, cidr, _ := net.ParseCIDR(src)
if cidr.Contains(proxier.nodeIP) {
allowFromNode = true //配置CIDR包含节点IP，则允许来自节点请求
}
}
// 添加 "-s $ingresIP" 来允许LB后端主机请求
if allowFromNode {
writeLine(proxier.natRules, append(args, "-s", utilproxy.ToCIDR(net.ParseIP(ingress.IP)), "-j", string(chosenChain))...)
}
}
// 条件ingress.IP为空"-j KUBE-MARK-DROP"
writeLine(proxier.natRules, append(args, "-j", string(KubeMarkDropChain))...)
}
}
}
服务是否启用了nodeport(在每个节点上都将开启一个nodeport端口)
!FILENAME pkg/proxy/iptables/proxier.go:989
if svcInfo.NodePort != 0 {
// 获取node addresses
addresses, err := utilproxy.GetNodeAddresses(proxier.nodePortAddresses, proxier.networkInterfacer)
if err != nil {
klog.Errorf("Failed to get node ip address matching nodeport cidr: %v", err)
continue
}
lps := make([]utilproxy.LocalPort, 0)
for address := range addresses {
lp := utilproxy.LocalPort{
Description: "nodePort for " + svcNameString,
IP: address,
Port: svcInfo.NodePort,
Protocol: protocol,
}
if utilproxy.IsZeroCIDR(address) {
// Empty IP address means all
lp.IP = ""
lps = append(lps, lp)
// If we encounter a zero CIDR, then there is no point in processing the rest of the addresses.
break
}
lps = append(lps, lp) //IP列表
}
// 为node节点的ips打开端口并保存持有socket句柄
for _, lp := range lps {
if proxier.portsMap[lp] != nil {
klog.V(4).Infof("Port %s was open before and is still needed", lp.String())
replacementPortsMap[lp] = proxier.portsMap[lp]
} else if svcInfo.GetProtocol() != v1.ProtocolSCTP {
// 打开和监听端口
socket, err := proxier.portMapper.OpenLocalPort(&lp)
if err != nil {
klog.Errorf("can't open %s, skipping this nodePort: %v", lp.String(), err)
continue
}
if lp.Protocol == "udp" {
//清理udp conntrack记录
err := conntrack.ClearEntriesForPort(proxier.exec, lp.Port, isIPv6, v1.ProtocolUDP)
if err != nil {
klog.Errorf("Failed to clear udp conntrack for port %d, error: %v", lp.Port, err)
}
}
replacementPortsMap[lp] = socket //socket保存
}
}
//存在端点，写规则
if hasEndpoints {
// -A KUBE-NODEPORTS -m comment --comment "..." -m $prot -p $prot --dport $nodePort
args = append(args[:0],
"-A", string(kubeNodePortsChain),
"-m", "comment", "--comment", svcNameString,
"-m", protocol, "-p", protocol,
"--dport", strconv.Itoa(svcInfo.NodePort),
)
if !svcInfo.OnlyNodeLocalEndpoints {
//非本地nodeports则需SNAT规则添加,
// -j KUBE-MARK-MASQ -j KUBE-XLB-XXXX16bitXXXX
writeLine(proxier.natRules, append(args, "-j", string(KubeMarkMasqChain))...)
// Jump to the service chain.
writeLine(proxier.natRules, append(args, "-j", string(svcChain))...)
} else {
loopback := "127.0.0.0/8"
if isIPv6 {
loopback = "::1/128"
}
// 本地nodeports则规则添加,
// -s $loopback -j KUBE-MARK-MASQ -j KUBE-XLB-XXXX16bitXXXX
writeLine(proxier.natRules, append(args, "-s", loopback, "-j", string(KubeMarkMasqChain))...)
writeLine(proxier.natRules, append(args, "-j", string(svcXlbChain))...)
}
} else {
// 无hasEndpoints，添加-j reject规则
// -A KUBE-EXTERNAL-SERVICES -m comment --comment "..." -m addrtype \
// --dst-type LOCAL -m $prot -p $prot --dport $nodePort -j REJECT
writeLine(proxier.filterRules,
"-A", string(kubeExternalServicesChain),
"-m", "comment", "--comment", fmt.Sprintf(`"%s has no endpoints"`, svcNameString),
"-m", "addrtype", "--dst-type", "LOCAL",
"-m", protocol, "-p", protocol,
"--dport", strconv.Itoa(svcInfo.NodePort),
"-j", "REJECT",
)
}
}
基于服务名和协议，生成每个端点链
!FILENAME pkg/proxy/iptables/proxier.go:1087
for _, ep := range proxier.endpointsMap[svcName] {
epInfo, ok := ep.(*endpointsInfo)
if !ok {
klog.Errorf("Failed to cast endpointsInfo %q", ep.String())
continue
}
endpoints = append(endpoints, epInfo)
//基于服务名和协议生成端点链名称 "KUBE-SEP-XXXX16bitXXXX"
endpointChain = epInfo.endpointChain(svcNameString, protocol)
endpointChains = append(endpointChains, endpointChain)
// 创建端点链
if chain, ok := existingNATChains[utiliptables.Chain(endpointChain)]; ok {
writeBytesLine(proxier.natChains, chain)
} else {
writeLine(proxier.natChains, utiliptables.MakeChainLine(endpointChain))
}
activeNATChains[endpointChain] = true
}
写SessionAffinity会话保持规则，实现在一段时间内保持session affinity，保持时间为180秒，通过添加“-m recent –rcheck –seconds 180 –reap”的iptables规则实现了会话保持。
!FILENAME pkg/proxy/iptables/proxier.go:1107
//SessionAffinityType设置为"ClientIP"，则写session保持规则
// -A KUBE-SVC-XXXX16bitXXXX -m recent -m comment –comment "..." \
// --name KUBE-SEP-XXXX16bitXXXX --rcheck --seconds 180 --reap \
// -j KUBE-SEP-XXXX16bitXXXX
if svcInfo.SessionAffinityType == v1.ServiceAffinityClientIP {
for _, endpointChain := range endpointChains {
args = append(args[:0],
"-A", string(svcChain),
)
proxier.appendServiceCommentLocked(args, svcNameString)
args = append(args,
"-m", "recent", "--name", string(endpointChain),
"--rcheck", "--seconds", strconv.Itoa(svcInfo.StickyMaxAgeSeconds), "--reap",
"-j", string(endpointChain),
)
writeLine(proxier.natRules, args...)
}
}
写负载均衡和DNAT规则，使用“-m statistic –-mode random -–probability ” iptables规则将后端POD组成一个基于概率访问的组合,实现服务访问的负载均衡功能效果。
- 针对服务的每个端点在nat表内该service对应的自定义链“KUBE-SVC-XXXX16bitXXXX”中加入iptables规则。如果该服务对应的endpoints大于等于2，则添加负载均衡规则。
- 针对选择非本地Node上的POD，需进行DNAT，将请求的目标地址设置成后选的POD的IP后进行路由。KUBE-MARK-MASQ将重设(伪装)源地址
-A KUBE-SVC-XXXX16bitXXXX -m comment –comment "..." -m statistic --mode random --probability $prob -j KUBE-SEP-XXXX16bitXXXX
-A KUBE-SEP-XXXX16bitXXXX -m comment –comment "..." -s $epIp -j "KUBE-MARK-MASQ"
-A KUBE-SVC-XXXX16bitXXXX -m comment –comment "…" -m prot -p $prot -j DNAT --to-destination X.X.X.X:xxx
!FILENAME pkg/proxy/iptables/proxier.go:1123
// 写负载均衡和DNAT规则
n := len(endpointChains)
for i, endpointChain := range endpointChains {
epIP := endpoints[i].IP()
if epIP == "" {
// Error parsing this endpoint has been logged. Skip to next endpoint.
continue
}
// 每个服务生成的负载均衡规则，后端POD组成一个基于概率访问的组合
// // -A KUBE-SVC-XXXX16bitXXXX -m comment –comment "..."
// -m statistic --mode random --probability $prob
// -j KUBE-SEP-XXXX16bitXXXX
args = append(args[:0], "-A", string(svcChain))
proxier.appendServiceCommentLocked(args, svcNameString)
if i < (n - 1) { // 当端点大于或等于2
args = append(args,
"-m", "statistic",
"--mode", "random",
"--probability", proxier.probability(n-i))
}
// The final (or only if n == 1) rule is a guaranteed match.
args = append(args, "-j", string(endpointChain))
writeLine(proxier.natRules, args...)
// 每个端点链规则
// -A KUBE-SEP-XXXX16bitXXXX -m comment –comment "..." -s $epIp -j "KUBE-MARK-MASQ"
args = append(args[:0], "-A", string(endpointChain))
proxier.appendServiceCommentLocked(args, svcNameString)
// Handle traffic that loops back to the originator with SNAT.
writeLine(proxier.natRules, append(args,
"-s", utilproxy.ToCIDR(net.ParseIP(epIP)),
"-j", string(KubeMarkMasqChain))...)
// 如配置session保持"ClientIP"
// -m recent --name KUBE-SEP-XXXX16bitXXXX --set
if svcInfo.SessionAffinityType == v1.ServiceAffinityClientIP {
args = append(args, "-m", "recent", "--name", string(endpointChain), "--set")
}
// DNAT至最终的端点服务上
// -A KUBE-SVC-XXXX16bitXXXX -m comment –comment "..."
// -m $prot -p $prot -j DNAT --to-destination X.X.X.X:xxx
args = append(args, "-m", protocol, "-p", protocol, "-j", "DNAT", "--to-destination", endpoints[i].Endpoint)
writeLine(proxier.natRules, args...)
}
// 服务请求仅本地流量
localEndpoints := make([]*endpointsInfo, 0)
localEndpointChains := make([]utiliptables.Chain, 0)
for i := range endpointChains {
if endpoints[i].IsLocal {
// These slices parallel each other; must be kept in sync
localEndpoints = append(localEndpoints, endpoints[i])
localEndpointChains = append(localEndpointChains, endpointChains[i])
}
}
启用clusterCIDR (Kube-proxy中的--cluster-dir指定的是集群中pod使用的网段，而pod使用的网段和apiserver中指定的service的cluster ip或vip网段不是同一个网段)
!FILENAME pkg/proxy/iptables/proxier.go:1179
// pod -> external VIP流量导向服务VIP(服务链)
// -A KUBE-XLB-XXXX16bitXXXX -m comment --comment "..." -s $clusterCIDR
// -j KUBE-SVC-XXXX16bitXXXXX
if len(proxier.clusterCIDR) > 0 {
args = append(args[:0],
"-A", string(svcXlbChain),
"-m", "comment", "--comment",
`"Redirect pods trying to reach external loadbalancer VIP to clusterIP"`,
"-s", proxier.clusterCIDR,
"-j", string(svcChain),
)
writeLine(proxier.natRules, args...)
}
生成本地端点链规则，本地源IP保持(当只在本地选择POD服务请求时，则不存在SNAT规则，可保持源地址IP信息。在nodePort或XLB时，可定义"externalTrafficPolicy": "Local"控制向属于这个service的本地的POD转发请求，如果本地没有POD能服务这个请求，请求将被DROP掉，客户端会发现请求超时没有响应。
!FILENAME pkg/proxy/iptables/proxier.go:1190
numLocalEndpoints := len(localEndpointChains)
if numLocalEndpoints == 0 {
// 无本地端点，将流量Drop(流量黑洞处理)
// -A KUBE-XLB-XXXX16bitXXXX -m comment --comment "..." -j KUBE-MARK-DROP
args = append(args[:0],
"-A", string(svcXlbChain),
"-m", "comment", "--comment",
fmt.Sprintf(`"%s has no local endpoints"`, svcNameString),
"-j",
string(KubeMarkDropChain),
)
writeLine(proxier.natRules, args...)
} else {
// 本地端点会话保持开启
// -A KUBE-XLB-XXXX16bitXXXX -m comment --comment "..." -m recent \
// --name KUBE-SEP-XXXX16bitXXXX \
// --rcheck --seconds $StickyMaxAge --reap -j KUBE-SEP-XXXX16bitXXXX
if svcInfo.SessionAffinityType == v1.ServiceAffinityClientIP {
for _, endpointChain := range localEndpointChains {
writeLine(proxier.natRules,
"-A", string(svcXlbChain),
"-m", "comment", "--comment", svcNameString,
"-m", "recent", "--name", string(endpointChain),
"--rcheck", "--seconds", strconv.Itoa(svcInfo.StickyMaxAgeSeconds), "--reap",
"-j", string(endpointChain))
}
}
// 本地端点负载均衡处理"-m statistic --mode random --probability"
// 后端POD组成一个基于概率访问的组合
for i, endpointChain := range localEndpointChains {
// Balancing rules in the per-service chain.
args = append(args[:0],
"-A", string(svcXlbChain),
"-m", "comment", "--comment",
fmt.Sprintf(`"Balancing rule %d for %s"`, i, svcNameString),
)
if i < (numLocalEndpoints - 1) {
// Each rule is a probabilistic match.
args = append(args,
"-m", "statistic",
"--mode", "random",
"--probability", proxier.probability(numLocalEndpoints-i))
}
args = append(args, "-j", string(endpointChain))
// -A KUBE-XLB-XXXX16bitXXXX -m comment --comment "..." -m recent \
// --name KUBE-SEP-XXXX16bitXXXX -m statistic --mode random \
// --probability 0.50000000000 -j KUBE-SEP-XXXX16bitXXXX
writeLine(proxier.natRules, args...)
}
}
配置收尾规则数据
删除不再使用的服务自定义kube链"KUBE-SVC-*"/"KUBE-SEP-*"/"KUBE-FW-*"/"KUBE-XLB-*"。
!FILENAME pkg/proxy/iptables/proxier.go:1237
for chain := range existingNATChains {
if !activeNATChains[chain] {
chainString := string(chain)
if !strings.HasPrefix(chainString, "KUBE-SVC-") && !strings.HasPrefix(chainString, "KUBE-SEP-") && !strings.HasPrefix(chainString, "KUBE-FW-") && !strings.HasPrefix(chainString, "KUBE-XLB-") {
// Ignore chains that aren't ours.
continue
}
// We must (as per iptables) write a chain-line for it, which has
// the nice effect of flushing the chain. Then we can remove the
// chain.
writeBytesLine(proxier.natChains, existingNATChains[chain])
writeLine(proxier.natRules, "-X", chainString)
}
}
添加服务的nodeports规则(nat表-"KUBE-SERVICES"链)
!FILENAME pkg/proxy/iptables/proxier.go:1254
// -A KUBE-SERVICES -m comment --comment "..." -m addrtype --dst-type LOCAL \
// -j KUBE-NODEPORTS
//
// -A KUBE-SERVICES -m comment --comment "..." -d $NODEIP -j KUBE-NODEPORTS
//
addresses, err := utilproxy.GetNodeAddresses(proxier.nodePortAddresses, proxier.networkInterfacer)
if err != nil {
klog.Errorf("Failed to get node ip address matching nodeport cidr")
} else {
isIPv6 := proxier.iptables.IsIpv6()
for address := range addresses {
// TODO(thockin, m1093782566): If/when we have dual-stack support we will want to distinguish v4 from v6 zero-CIDRs.
if utilproxy.IsZeroCIDR(address) {
args = append(args[:0],
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", `"kubernetes service nodeports; NOTE: this must be the last rule in this chain"`,
"-m", "addrtype", "--dst-type", "LOCAL",
"-j", string(kubeNodePortsChain))
writeLine(proxier.natRules, args...)
// Nothing else matters after the zero CIDR.
break
}
// Ignore IP addresses with incorrect version
if isIPv6 && !utilnet.IsIPv6String(address) || !isIPv6 && utilnet.IsIPv6String(address) {
klog.Errorf("IP address %s has incorrect IP version", address)
continue
}
// create nodeport rules for each IP one by one
args = append(args[:0],
"-A", string(kubeServicesChain),
"-m", "comment", "--comment", `"kubernetes service nodeports; NOTE: this must be the last rule in this chain"`,
"-d", address,
"-j", string(kubeNodePortsChain))
writeLine(proxier.natRules, args...)
}
}
添加forward规则(filter表-"KUBE-FORWARD"链)
!FILENAME pkg/proxy/iptables/proxier.go:1289
//-A KUBE-FORWARD -m comment --comment "..." -m mark --mark 0xFFFF/0xFFFF -j ACCEPT
writeLine(proxier.filterRules,
"-A", string(kubeForwardChain),
"-m", "comment", "--comment", `"kubernetes forwarding rules"`,
"-m", "mark", "--mark", proxier.masqueradeMark,
"-j", "ACCEPT",
)
添加带clusterCIDR配置(源/目标)规则(filter表-"KUBE-FORWARD"链)
!FILENAME pkg/proxy/iptables/proxier.go:1297
//Kube-proxy中的cluster-dir指定的是集群中pod使用的网段
//pod使用的网段和service的cluster ip网段不是同一个网段
//
// -A KUBE-FORWARD -s $clusterCIDR -m comment --comment "..." -m conntrack --ctstate \
// RELATED,ESTABLISHED -j ACCEPT
// -A KUBE-FORWARD -m comment --comment "..." -d $clusterCIDR -m conntrack --ctstate \
// RELATED,ESTABLISHED -j ACCEPT
//
if len(proxier.clusterCIDR) != 0 {
writeLine(proxier.filterRules,
"-A", string(kubeForwardChain),
"-s", proxier.clusterCIDR, //指定源
"-m", "comment", "--comment", `"kubernetes forwarding conntrack pod source rule"`,
"-m", "conntrack",
"--ctstate", "RELATED,ESTABLISHED",
"-j", "ACCEPT",
)
writeLine(proxier.filterRules,
"-A", string(kubeForwardChain),
"-m", "comment", "--comment", `"kubernetes forwarding conntrack pod destination rule"`,
"-d", proxier.clusterCIDR, //指定目标
"-m", "conntrack",
"--ctstate", "RELATED,ESTABLISHED",
"-j", "ACCEPT",
)
}
结尾标志写入
writeLine(proxier.filterRules, "COMMIT")
writeLine(proxier.natRules, "COMMIT")
汇集与加载 iptables 配置规则数据
!FILENAME pkg/proxy/iptables/proxier.go:1326
//汇集前面所处理的filter和nat表数据至iptablesData
proxier.iptablesData.Reset()
proxier.iptablesData.Write(proxier.filterChains.Bytes())
proxier.iptablesData.Write(proxier.filterRules.Bytes())
proxier.iptablesData.Write(proxier.natChains.Bytes())
proxier.iptablesData.Write(proxier.natRules.Bytes())
klog.V(5).Infof("Restoring iptables rules: %s", proxier.iptablesData.Bytes())
// iptables-restore加载新配置(iptablesData)
err = proxier.iptables.RestoreAll(proxier.iptablesData.Bytes(), utiliptables.NoFlushTables, utiliptables.RestoreCounters)
if err != nil {
klog.Errorf("Failed to execute iptables-restore: %v", err)
// Revert new local ports.
klog.V(2).Infof("Closing local ports after iptables-restore failure")
utilproxy.RevertPorts(replacementPortsMap, proxier.portsMap)
return
}
IPtables 底层的 runner 实现
前面基本已看完整个proxy的执行流程，最后iptables proxier是如何使用系统层iptables命令进行底层的iptables规则CRUD操作（通俗的理解：iptables proxier实现都是在操作iptables命令生成相应的规则），下面我来看一下kuber-proxy组件底层iptables操作器的封装。
iptables 执行器
Interface**接口为运行iptables命令定义
!FILENAME pkg/util/iptables/iptables.go:45
//接口与接口方法定义
type Interface interface {
GetVersion() (string, error)
EnsureChain(table Table, chain Chain) (bool, error)
FlushChain(table Table, chain Chain) error
DeleteChain(table Table, chain Chain) error
EnsureRule(position RulePosition, table Table, chain Chain, args ...string) (bool, error)
DeleteRule(table Table, chain Chain, args ...string) error
IsIpv6() bool
SaveInto(table Table, buffer *bytes.Buffer) error
Restore(table Table, data []byte, flush FlushFlag, counters RestoreCountersFlag) error
RestoreAll(data []byte, flush FlushFlag, counters RestoreCountersFlag) error
AddReloadFunc(reloadFunc func())
Destroy()
}
iptables Interface接实现类runner,完成对iptables命令执行器的定义
!FILENAME pkg/util/iptables/iptables.go:135
// 类结构定义
type runner struct {
mu sync.Mutex //同步锁
exec utilexec.Interface //osExec命令执行
dbus utildbus.Interface //D-Bus操作API接口
protocol Protocol //协议IPv4/IPv6
hasCheck bool //"-C"检测命令flag
hasListener bool //D-Bus信号监听是否开启(FirewallD start/restart)
waitFlag []string //iptables命令"wait"flag,等待xtables锁
restoreWaitFlag []string //iptables-restore命令"wait"flag
lockfilePath string //xtables锁文件位置
reloadFuncs []func() //定义reload处理func
signal chan *godbus.Signal //dbus信号
}
// Runner实现Iterface方法列表，后面将详细分析关键的方法实现代码逻辑
func (runner *runner) GetVersion() (string, error)
func (runner *runner) EnsureChain(table Table, chain Chain) (bool, error)
func (runner *runner) FlushChain(table Table, chain Chain) error
func (runner *runner) DeleteChain(table Table, chain Chain) error
func (runner *runner) EnsureRule(position RulePosition, table Table, chain Chain, args ...string) (bool, error)
func (runner *runner) DeleteRule(table Table, chain Chain, args ...string) error
func (runner *runner) IsIpv6() bool
func (runner *runner) SaveInto(table Table, buffer *bytes.Buffer) error
func (runner *runner) Restore(table Table, data []byte, flush FlushFlag, counters RestoreCountersFlag) error
func (runner *runner) RestoreAll(data []byte, flush FlushFlag, counters RestoreCountersFlag) error
func (runner *runner) AddReloadFunc(reloadFunc func())
func (runner *runner) Destroy()
// Runner内部方法列表
func (runner *runner) connectToFirewallD()
func (runner *runner) restoreInternal(args []string, data []byte, flush FlushFlag, counters RestoreCountersFlag) error
func (runner *runner) run(op operation, args []string) ([]byte, error)
func (runner *runner) runContext(ctx context.Context, op operation, args []string) ([]byte, error)
func (runner *runner) checkRule(table Table, chain Chain, args ...string) (bool, error)
func (runner *runner) checkRuleWithoutCheck(table Table, chain Chain, args ...string) (bool, error)
func (runner *runner) checkRuleUsingCheck(args []string) (bool, error)
func (runner *runner) dbusSignalHandler(bus utildbus.Connection)
func (runner *runner) reload()
iptables runner对象的构造New() -> newInternal(),返回runner{…}实例化对象(Interface接口类型) ，完成了创建一个iptables的命令执行器生成工作。
!FILENAME pkg/util/iptables/iptables.go:152
func newInternal(exec utilexec.Interface, dbus utildbus.Interface, protocol Protocol, lockfilePath string) Interface {
vstring, err := getIPTablesVersionString(exec, protocol) //iptables版本获取
if err != nil {
klog.Warningf("Error checking iptables version, assuming version at least %s: %v", MinCheckVersion, err)
vstring = MinCheckVersion
}
if lockfilePath == "" {
lockfilePath = LockfilePath16x //默认锁文件位置"/run/xtables.lock"
}
runner := &runner{
exec: exec, //utilexec = osExec封装
dbus: dbus, //utildbus
protocol: protocol, //IPv4 or IPv6
hasCheck: getIPTablesHasCheckCommand(vstring), //"-C" flag是否指定
hasListener: false,
waitFlag: getIPTablesWaitFlag(vstring), //iptables -wait
restoreWaitFlag: getIPTablesRestoreWaitFlag(exec, protocol), //iptables-restore -wait
lockfilePath: lockfilePath, //xtables锁文件位置
}
return runner
}
// 返回iptables exec命令执行器对象runner
func New(exec utilexec.Interface, dbus utildbus.Interface, protocol Protocol) Interface {
return newInternal(exec, dbus, protocol, "")
}
iptables 执行器方法
runner.run() 这个是方法是runner最基础和公共调用的内部方法，也就是iptables命令执行os exec调用代码。run()有两个传参：1. 指定iptables操作command，2.参数列表。通过传参将组成一个完整的iptables命令进行exec调用执行。runContext()此方法内含有带context上下文和不带context两种执行方式。
!FILENAME pkg/util/iptables/iptables.go:218
func (runner *runner) run(op operation, args []string) ([]byte, error) {
return runner.runContext(nil, op, args)
}
func (runner *runner) runContext(ctx context.Context, op operation, args []string) ([]byte, error) {
iptablesCmd := iptablesCommand(runner.protocol) // "iptabels or ip6tables"
fullArgs := append(runner.waitFlag, string(op))
fullArgs = append(fullArgs, args...)
klog.V(5).Infof("running iptables %s %v", string(op), args)
// 根据是否传有Context上下文，调用不同的执行command/commandContext
if ctx == nil {
return runner.exec.Command(iptablesCmd, fullArgs...).CombinedOutput()
}
return runner.exec.CommandContext(ctx, iptablesCmd, fullArgs...).CombinedOutput()
}
//支持的iptables操作commands
type operation string
//runner.exec实现是osexec命令的执行
func New() Interface {
return &executor{}
}
// Command is part of the Interface interface.
func (executor *executor) Command(cmd string, args ...string) Cmd {
return (*cmdWrapper)(osexec.Command(cmd, args...))
}
// CommandContext is part of the Interface interface.
func (executor *executor) CommandContext(ctx context.Context, cmd string, args ...string) Cmd {
return (*cmdWrapper)(osexec.CommandContext(ctx, cmd, args...))
}
runner.GetVersion() 获取系统安装的iptables版本信息，格式为 "X.Y.Z"
!FILENAME pkg/util/iptables/iptables.go:218
func (runner *runner) GetVersion() (string, error) {
return getIPTablesVersionString(runner.exec, runner.protocol)
}
func getIPTablesVersionString(exec utilexec.Interface, protocol Protocol) (string, error) {
// 执行命令"iptables or ip6tables --version"
iptablesCmd := iptablesCommand(protocol)
bytes, err := exec.Command(iptablesCmd, "--version").CombinedOutput()
if err != nil {
return "", err
}
// 正则匹配，查找版本字符串，格式为 "X.Y.Z"
versionMatcher := regexp.MustCompile("v([0-9]+(\\.[0-9]+)+)")
match := versionMatcher.FindStringSubmatch(string(bytes))
if match == nil {
return "", fmt.Errorf("no iptables version found in string: %s", bytes)
}
return match[1], nil
}
runner.EnsureChain() "-N" 检测指定的规则链是否存在，如果不存则创建此链，存在则返回true
!FILENAME pkg/util/iptables/iptables.go:223
func (runner *runner) EnsureChain(table Table, chain Chain) (bool, error) {
fullArgs := makeFullArgs(table, chain)
runner.mu.Lock()
defer runner.mu.Unlock()
//执行"iptables -t $tableName -N $chainName"
out, err := runner.run(opCreateChain, fullArgs)
if err != nil {
if ee, ok := err.(utilexec.ExitError); ok {
if ee.Exited() && ee.ExitStatus() == 1 {
return true, nil
}
}
return false, fmt.Errorf("error creating chain %q: %v: %s", chain, err, out)
}
return false, nil
}
runner.FlushChain() "-F" 清空指定链
!FILENAME pkg/util/iptables/iptables.go:242
func (runner *runner) FlushChain(table Table, chain Chain) error {
fullArgs := makeFullArgs(table, chain)
//...
//执行"iptables -t $tableName -F $chainName"
out, err := runner.run(opFlushChain, fullArgs)
//...
}
runner.DeleteChain() "-X" 删除指定的链
!FILENAME pkg/util/iptables/iptables.go:256
func (runner *runner) DeleteChain(table Table, chain Chain) error {
fullArgs := makeFullArgs(table, chain)
//...
//执行"iptables -t $tableName -X $chainName"
out, err := runner.run(opDeleteChain, fullArgs)
//...
}
runner.EnsureRule() 检测规则是否存在，不存在则指定的"表内链上", 指定position添加规则
!FILENAME pkg/util/iptables/iptables.go:271
func (runner *runner) EnsureRule(position RulePosition, table Table, chain Chain, args ...string) (bool, error) {
fullArgs := makeFullArgs(table, chain, args...)
runner.mu.Lock()
defer runner.mu.Unlock()
// 检测规则是否存在
exists, err := runner.checkRule(table, chain, args...)
if err != nil {
return false, err
}
if exists {
return true, nil
}
// RulePosition "-I" "-A"
// 指定链序插入规则,执行"iptables -I $chainName -t $tableName ... "
// 链末添加规则,执行"iptables -A $chainName -t $tableName ... "
out, err := runner.run(operation(position), fullArgs)
if err != nil {
return false, fmt.Errorf("error appending rule: %v: %s", err, out)
}
return false, nil
}
//checkRule()先判断iptables是否支持"-C"flag,调用不同版本的检测rule的方法
func (runner *runner) checkRule(table Table, chain Chain, args ...string) (bool, error) {
if runner.hasCheck {
return runner.checkRuleUsingCheck(makeFullArgs(table, chain, args...))
}
return runner.checkRuleWithoutCheck(table, chain, args...)
}
//支持"-C"flag
func (runner *runner) checkRuleUsingCheck(args []string) (bool, error) {
ctx, cancel := context.WithTimeout(context.Background(), 5*time.Minute)
defer cancel()
//...
//执行"iptables -wait -C $chainName -t $tableName ... "
out, err := runner.runContext(ctx, opCheckRule, args)
//...
}
//不支持"-C"flag，为了兼容iptables版本<1.4.11
func (runner *runner) checkRuleWithoutCheck(table Table, chain Chain, args ...string) (bool, error) {
// 'iptables-save -t $tableName'
iptablesSaveCmd := iptablesSaveCommand(runner.protocol)
klog.V(1).Infof("running %s -t %s", iptablesSaveCmd, string(table))
out, err := runner.exec.Command(iptablesSaveCmd, "-t", string(table)).CombinedOutput()
if err != nil {
return false, fmt.Errorf("error checking rule: %v", err)
}
//移除引号
var argsCopy []string
for i := range args {
tmpField := strings.Trim(args[i], "\"")
tmpField = trimhex(tmpField)
argsCopy = append(argsCopy, strings.Fields(tmpField)...)
}
argset := sets.NewString(argsCopy...)
for _, line := range strings.Split(string(out), "\n") {
var fields = strings.Fields(line)
//检测rule的链是否一致
if !strings.HasPrefix(line, fmt.Sprintf("-A %s", string(chain))) || len(fields) != len(argsCopy)+2 {
continue
}
// 移除所有引号
for i := range fields {
fields[i] = strings.Trim(fields[i], "\"")
fields[i] = trimhex(fields[i])
}
//字符集匹配查找是否存在
if sets.NewString(fields...).IsSuperset(argset) {
return true, nil
}
klog.V(5).Infof("DBG: fields is not a superset of args: fields=%v args=%v", fields, args)
}
return false, nil
}
runner.DeleteRule() "-D" 指定的"表中链上"删除规则
!FILENAME pkg/util/iptables/iptables.go:292
func (runner *runner) DeleteRule(table Table, chain Chain, args ...string) error {
fullArgs := makeFullArgs(table, chain, args...)
//...
//检测规则是否存在
exists, err := runner.checkRule(table, chain, args...)
//...
//执行"iptables -D $chainName -t $tableName ..."
out, err := runner.run(opDeleteRule, fullArgs)
//...
}
runner.SaveInto() 保存指定表的iptables规则集（buffer内）
!FILENAME pkg/util/iptables/iptables.go:317
func (runner *runner) SaveInto(table Table, buffer *bytes.Buffer) error {
//...
// 执行 "iptables-save -t $tableName"
iptablesSaveCmd := iptablesSaveCommand(runner.protocol)
args := []string{"-t", string(table)}
cmd := runner.exec.Command(iptablesSaveCmd, args...)
cmd.SetStdout(buffer)
cmd.SetStderr(buffer)
return cmd.Run()
}
runner.Restore() 装载指定表由iptables-save保存的规则集(从标准输入接收输入)
!FILENAME pkg/util/iptables/iptables.go:340
func (runner *runner) Restore(table Table, data []byte, flush FlushFlag, counters RestoreCountersFlag) error {
// "iptables-restore -T $tableName"
args := []string{"-T", string(table)}
return runner.restoreInternal(args, data, flush, counters) //call and return
}
// restoreInternal()参数组装和iptables-restore命令恢复规则集data
func (runner *runner) restoreInternal(args []string, data []byte, flush FlushFlag, counters RestoreCountersFlag) error {
runner.mu.Lock()
defer runner.mu.Unlock()
trace := utiltrace.New("iptables restore")
defer trace.LogIfLong(2 * time.Second)
//参数的组装 "--noflush" "--counters" "--wait"
if !flush {
args = append(args, "--noflush")
}
if counters {
args = append(args, "--counters")
}
if len(runner.restoreWaitFlag) == 0 {
locker, err := grabIptablesLocks(runner.lockfilePath)
if err != nil {
return err
}
trace.Step("Locks grabbed")
defer func(locker iptablesLocker) {
if err := locker.Close(); err != nil {
klog.Errorf("Failed to close iptables locks: %v", err)
}
}(locker)
}
fullArgs := append(runner.restoreWaitFlag, args...)
iptablesRestoreCmd := iptablesRestoreCommand(runner.protocol)
klog.V(4).Infof("running %s %v", iptablesRestoreCmd, fullArgs)
// "iptables-restore -T $tableName --wait --noflush --counters < data"
cmd := runner.exec.Command(iptablesRestoreCmd, fullArgs...)
//从标准输入接受输入规则集data
cmd.SetStdin(bytes.NewBuffer(data))
//command对象执行与输出反馈
b, err := cmd.CombinedOutput()
if err != nil {
return fmt.Errorf("%v (%s)", err, b)
}
return nil
}
**runner.RestoreAll() ** 如同上Restore()，调用命令iptables-restore装载所有备份规则集
!FILENAME pkg/util/iptables/iptables.go:347
func (runner *runner) RestoreAll(data []byte, flush FlushFlag, counters RestoreCountersFlag) error {
args := make([]string, 0)
//同上，无参数限制
return runner.restoreInternal(args, data, flush, counters)
}
**runner.AddReloadFunc() **注册reload回调函数，实现iptables reload重新加载规则
!FILENAME pkg/util/iptables/iptables.go:679
func (runner *runner) AddReloadFunc(reloadFunc func()) {
runner.mu.Lock()
defer runner.mu.Unlock()
//是否已启动监听
if !runner.hasListener {
runner.connectToFirewallD() //启动D-bus监听
}
runner.reloadFuncs = append(runner.reloadFuncs, reloadFunc) //注册信号触发回调func
}
//通过Linux内核D-bus机制实现对FirewallD进程的信号监听与处理（实现reload iptables规则）
func (runner *runner) connectToFirewallD() {
bus, err := runner.dbus.SystemBus()
if err != nil {
klog.V(1).Infof("Could not connect to D-Bus system bus: %s", err)
return
}
runner.hasListener = true
//SystemBus对象添加匹配规则定义（firewalld）
rule := fmt.Sprintf("type='signal',sender='%s',path='%s',interface='%s',member='Reloaded'", firewalldName, firewalldPath, firewalldInterface)
bus.BusObject().Call("org.freedesktop.DBus.AddMatch", 0, rule)
rule = fmt.Sprintf("type='signal',interface='org.freedesktop.DBus',member='NameOwnerChanged',path='/org/freedesktop/DBus',sender='org.freedesktop.DBus',arg0='%s'", firewalldName)
bus.BusObject().Call("org.freedesktop.DBus.AddMatch", 0, rule)
runner.signal = make(chan *godbus.Signal, 10)
bus.Signal(runner.signal)
go runner.dbusSignalHandler(bus) //D-Bus信号监听处理Handler
}
//goroutine监听D-Bus信号，监听FirewallD发生变化和reload信号则reload规则集
func (runner *runner) dbusSignalHandler(bus utildbus.Connection) {
firewalld := bus.Object(firewalldName, firewalldPath)
for s := range runner.signal {
if s == nil {
// 反注册dbus
bus.Signal(runner.signal)
return
}
switch s.Name {
case "org.freedesktop.DBus.NameOwnerChanged": //信号：指定名称的拥有者发生了变化
name := s.Body[0].(string)
new_owner := s.Body[2].(string)
// 信号名称为"org.fedoraproject.FirewallD1"
if name != firewalldName || len(new_owner) == 0 {
continue
}
firewalld.Call(firewalldInterface+".getDefaultZone", 0)
runner.reload() //重新加载与同步规则(遍历调用runner.reloadFuncs())
case firewalldInterface + ".Reloaded":
runner.reload()
}
}
}
runner.Destroy() D-bus监听注消
!FILENAME pkg/util/iptables/iptables.go:218
func (runner *runner) Destroy() {
if runner.signal != nil {
runner.signal <- nil //D-Bug信号channel置为空实现反注册
}
}
上面为kube-proxy第三层的iptables Proxier代码分析所有内容，对于另外两种模式ipvs、userspace模式的proxier实现代码分析可查询userspace-mode proxier和ipvs-mode proxier文章内容。
~本文 END~