Introduction
Starting at a new employer always mean checking out various git repositories.
As the amount of repositories a company has grows, the time needed to clone all of those repositories also grows.
This script automates this task.
In order for this script to work, a personal access token
is needed.
To avoid unexpected behaviour, use Group's ID, rather than its key/name. Informations about Groups can be found in the API at
https://gitlab.example.com/api/v4/groups.
Usage
Call bash gitlab-clone-projects.sh
For full usage details gitlab-clone-projects --help is available:
Usage: gitlab-clone-projects.sh [-dh]
Where:
-
-
-
Options:
- -d|--dry-run Only list the repositories, without actually cloning them
- -h|--help Print this help dialogue and exit
- -u|--user The given ID is a user, not a group
The repositories will be cloned into a sub-directory under the path from Where
this script has been called. The repository will be cloned into ./{repo-name}
The git executable can be overridden by setting the GIT environmental variable
before calling this script:
GIT=/usr/local/git-plus gitlab-clone-projects.sh
github-clone-projects.bash
#!/usr/bin/env bash
# ==============================================================================
# Copyright (C) 2021 Potherca
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at https://mozilla.org/MPL/2.0/.
# ==============================================================================
# There are a few standards this code tries to adhere to, these are listed below.
#
# - Code follows the BASH style-guide described at:
# http://guides.dealerdirect.io/code-styling/bash/
#
# - Variables are named using an adaption of Systems Hungarian explained at:
# http://blog.pother.ca/VariableNamingConvention
#
# ==============================================================================
set -o errexit # Exit script when a command exits with non-zero status.
set -o errtrace # Exit on error inside any functions or sub-shells.
set -o nounset # Exit script on use of an undefined variable.
set -o pipefail # Return exit status of the last command in the pipe that exited with a non-zero exit code
# ==============================================================================
# Git Clone All Projects in GitHub Organisation
# ------------------------------------------------------------------------------
## Usage: $0 [-dh]
##
## Where:
## - is the domain where github lives (for instance: 'github.com')
## - is the ID of the group who's repos should be cloned
## - is the API access token to make REST API calls with
##
## Options:
## -d|--dry-run Only list the repositories, without actually cloning them
## -h|--help Print this help dialogue and exit
## -u|--user The given ID is a user, not a organisation
##
## The repositories will be cloned into a sub-directory under the path from Where
## this script has been called. The repository will be cloned into ./${group-id}/${repo-name}
##
## The git executable can be overridden by setting the GIT environmental variable
## before calling this script:
##
## GIT=/usr/local/git-plus $0
# ==============================================================================
: readonly "${GIT:=git}"
usage() {
local sScript sUsage
readonly sScript="$(basename "$0")"
readonly sUsage="$(grep '^##' <"$0" | cut -c4-)"
echo -e "${sUsage//\$0/${sScript}}"
}
github-clone-projects() {
local -a aParameters aRepos
local g_sGithubDomain g_sGithubToken g_sId
local bIsUser bDryRun
local sDirectory sRepo sRepos
call-api() {
local -r sSubject="${1?One parameter required: }"
curl --silent -u "username:${g_sGithubToken}" "https://api.${g_sGithubDomain}/${sSubject}?per_page=100"
}
fetch-projects() {
local iId sSubject
readonly sSubject="${1?Two parameters required: }"
readonly iId="${2?Two parameters required: }"
call-api "${sSubject}/${iId}/repos" \
| grep -E -o '"ssh_url"\s*:\s*"[^"]+"' \
| cut -d '"' -f4
}
fetch-group-projects() {
local -r iId="${1?One parameters required: }"
fetch-projects 'orgs' "${iId}"
}
fetch-user-projects() {
local -r iId="${1?One parameters required: }"
fetch-projects 'users' "${iId}"
}
bIsUser=false
bDryRun=false
aParameters=()
for arg in "$@";do
case $arg in
-h|--help )
usage
exit
;;
-d|--dry-run )
readonly bDryRun=true
shift
;;
-u|--user )
readonly bIsUser=true
shift
;;
* )
aParameters+=( "$1" )
shift
;;
esac
done
readonly aParameters
readonly g_sGithubDomain="${aParameters[0]?Three parameters required: }"
readonly g_sId="${aParameters[1]?Three parameters required: }"
readonly g_sGithubToken="${aParameters[2]?Three parameters required: }"
if [[ "${bIsUser}" = 'true' ]];then
readonly sRepos=$(fetch-user-projects "${g_sId}")
else
readonly sRepos=$(fetch-group-projects "${g_sId}")
fi
aRepos=()
for sRepo in ${sRepos[*]}; do
aRepos+=("${sRepo}")
done
echo ' =====> Found ' ${#aRepos[@]} ' repositories'
for sRepo in "${aRepos[@]}"; do
# Grab repo name
sDirectory="$(echo "${sRepo}" | grep -o -E ':(.*)\.')"
# Lowercase the name
sDirectory="$(echo "${sDirectory}" | tr '[:upper:]' '[:lower:]')"
# Prepend the current location
sDirectory="$(realpath --canonicalize-missing --relative-to=./ "${sDirectory:1:-1}")"
if [[ -d "${sDirectory}" ]];then
echo " -----> Skipping '${sRepo}', directory '${sDirectory}' already exists"
else
echo " -----> Cloning '${sRepo}' into directory '${sDirectory}'"
if [[ "${bDryRun}" != 'true' ]];then
mkdir -p "${sDirectory}"
"${GIT}" clone --recursive "${sRepo}" "${sDirectory}" \
|| {
rm -rf "${sDirectory}"
echo -e "\n ! ERROR !\n Could not clone ${sRepo}"
}
echo ""
fi
fi
done
}
if [[ "${BASH_SOURCE[0]}" != "$0" ]]; then
export -f github-clone-projects
else
github-clone-projects "${@}"
exit $?
fi
#EOF
gitlab-clone-projects.bash
#!/usr/bin/env bash
# ==============================================================================
# Copyright (C) 2018, 2020 Potherca
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at https://mozilla.org/MPL/2.0/.
# ==============================================================================
# There are a few standards this code tries to adhere to, these are listed below.
#
# - Code follows the BASH style-guide described at:
# http://guides.dealerdirect.io/code-styling/bash/
#
# - Variables are named using an adaption of Systems Hungarian explained at:
# http://blog.pother.ca/VariableNamingConvention
#
# ==============================================================================
set -o errexit # Exit script when a command exits with non-zero status.
set -o errtrace # Exit on error inside any functions or sub-shells.
set -o nounset # Exit script on use of an undefined variable.
set -o pipefail # Return exit status of the last command in the pipe that exited with a non-zero exit code
# ==============================================================================
# Git Clone All Projects in Gitlab Group
# ------------------------------------------------------------------------------
## Usage: $0 [-dh]
##
## Where:
## - is the domain where gitlab lives (for instance: 'gitlab.com')
## - is the ID of the group who's repos should be cloned
## - is the API access token to make REST API calls with
##
## Options:
## -d|--dry-run Only list the repositories, without actually cloning them
## -h|--help Print this help dialogue and exit
## -u|--user The given ID is a user, not a group
##
## The repositories will be cloned into a sub-directory under the path from Where
## this script has been called. The repository will be cloned into ./${group-id}/${repo-name}
##
## The git executable can be overridden by setting the GIT environmental variable
## before calling this script:
##
## GIT=/usr/local/git-plus $0
# ==============================================================================
: readonly "${GIT:=git}"
usage() {
local sScript sUsage
readonly sScript="$(basename "$0")"
readonly sUsage="$(grep '^##' <"$0" | cut -c4-)"
echo -e "${sUsage//\$0/${sScript}}"
}
gitlab-clone-projects() {
local -a aParameters aRepos
local g_sGitlabDomain g_sGitlabToken g_sId
local bIsUser bDryRun
local sDirectory sRepo
call-api() {
local -r sSubject="${1?One parameter required: }"
curl --silent --header "PRIVATE-TOKEN: ${g_sGitlabToken}" "https://${g_sGitlabDomain}/api/v4/${sSubject}?per_page=100"
}
fetch-projects() {
local iId sSubject
readonly sSubject="${1?Two parameters required: }"
readonly iId="${2?Two parameters required: }"
call-api "${sSubject}/${iId}/projects" \
| grep -E -o '"ssh_url_to_repo":"[^"]+"' \
| cut -d '"' -f4
}
fetch-group-projects() {
local -r iId="${1?One parameters required: }"
fetch-projects 'groups' "${iId}"
}
fetch-user-projects() {
local -r iId="${1?One parameters required: }"
fetch-projects 'users' "${iId}"
}
bIsUser=false
bDryRun=false
aParameters=()
for arg in "$@";do
case $arg in
-h|--help )
usage
exit
;;
-d|--dry-run )
readonly bDryRun=true
shift
;;
-u|--user )
readonly bIsUser=true
shift
;;
* )
aParameters+=( "$1" )
shift
;;
esac
done
readonly aParameters
readonly g_sGitlabDomain="${aParameters[0]?Three parameters required: }"
readonly g_sId="${aParameters[1]?Three parameters required: }"
readonly g_sGitlabToken="${aParameters[2]?Three parameters required: }"
if [[ "${bIsUser}" = 'true' ]];then
readonly sRepos=$(fetch-user-projects "${g_sId}")
else
readonly sRepos=$(fetch-group-projects "${g_sId}")
fi
aRepos=()
for sRepo in ${sRepos[*]}; do
aRepos+=("${sRepo}")
done
echo ' =====> Found ' ${#aRepos[@]} ' repositories'
for sRepo in "${aRepos[@]}"; do
# Grab repo name
sDirectory="$(echo "${sRepo}" | grep -o -E ':(.*)\.')"
# Lowercase the name
sDirectory="$(echo "${sDirectory}" | tr '[:upper:]' '[:lower:]')"
# Prepend the current location
sDirectory="$(realpath --canonicalize-missing --relative-to=./ "${sDirectory:1:-1}")"
if [[ -d "${sDirectory}" ]];then
echo " -----> Skipping '${sRepo}', directory '${sDirectory}' already exists"
else
echo " -----> Cloning '${sRepo}' into directory '${sDirectory}'"
if [[ "${bDryRun}" != 'true' ]];then
mkdir -p "${sDirectory}"
"${GIT}" clone --recursive "${sRepo}" "${sDirectory}" \
|| {
rm -rf "${sDirectory}"
echo -e "\n ! ERROR !\n Could not clone ${sRepo}"
}
echo ""
fi
fi
done
}
if [[ "${BASH_SOURCE[0]}" != "$0" ]]; then
export -f gitlab-clone-projects
else
gitlab-clone-projects "${@}"
exit $?
fi
#EOF
参考
https://bl.ocks.org/Potherca/9dd4306eb27cad26d27874acd4b31376