为了能够看到51单片机接收到的串口数据,我选择了用oled显示收到的数据,特此花重金买了一块oled屏128X64的屏幕大概10来块钱吧!首先要达成的小目标就是能够显示数组的内容,建立一个字符数组,用来接收串口收到的数据,今天就研究怎么把数组的内容显示出来。
下面就是程序了,先来个截图,防止有些小伙伴搞不明白,我是这么走过来的,知道有朋友找到我的文章后需要的是什么?我看到的文章都不是很全,差点东西就要搞半天,我来个一次性的解决问题!
下面就是这四个文件的原码了,可以复制粘贴后直接使用!
串口_OLED.C文件,也是需要你自己来完成的文件。当然复制我的也可以实验。
#include"oled.h" #define uc unsigned char char str[]={0x41,0x42,0x43,0x44}; // 定义一个char类型的数组,里面放的是ABCD的十六进制数 int main() { uc *p = str; //用unsigned char类型的指针接收数组的地址 OLED_Init(); //初始化OLED OLED_Clear(); //清屏函数 while(1) { // 显示数组的值 OLED_ShowString(1,2,p,16);//第一个形参表示第六行,第二个形参表示排,第三个表示写入的字符,第四个表示字体大小 } }
oled.c文件,关于oled中所需要的函数尽数在这里:
#include "oled.h" #include "oledfont.h" //取模的中文库 void delay_ms(unsigned int ms) { unsigned int a; while(ms) { a=1800; while(a--); ms--; } } /********************************************** //IIC Start **********************************************/ void IIC_Start() { OLED_SCLK_Set() ; OLED_SDIN_Set(); OLED_SDIN_Clr(); OLED_SCLK_Clr(); } /********************************************** //IIC Stop **********************************************/ void IIC_Stop() { OLED_SCLK_Set() ; // OLED_SCLK_Clr(); OLED_SDIN_Clr(); OLED_SDIN_Set(); } void IIC_Wait_Ack() { //GPIOB->CRH &= 0XFFF0FFFF; //设置PB12为上拉输入模式 //GPIOB->CRH |= 0x00080000; // OLED_SDA = 1; // delay_us(1); //OLED_SCL = 1; //delay_us(50000); /* while(1) { if(!OLED_SDA) //判断是否接收到OLED 应答信号 { //GPIOB->CRH &= 0XFFF0FFFF; //设置PB12为通用推免输出模式 //GPIOB->CRH |= 0x00030000; return; } } */ OLED_SCLK_Set() ; OLED_SCLK_Clr(); } /********************************************** // IIC Write byte **********************************************/ void Write_IIC_Byte(unsigned char IIC_Byte) { unsigned char i; unsigned char m,da; da=IIC_Byte; OLED_SCLK_Clr(); for(i=0;i<8;i++) { m=da; // OLED_SCLK_Clr(); m=m&0x80; if(m==0x80) {OLED_SDIN_Set();} else OLED_SDIN_Clr(); da=da<<1; OLED_SCLK_Set(); OLED_SCLK_Clr(); } } /********************************************** // IIC Write Command **********************************************/ void Write_IIC_Command(unsigned char IIC_Command) { IIC_Start(); Write_IIC_Byte(0x78); //Slave address,SA0=0 IIC_Wait_Ack(); Write_IIC_Byte(0x00); //write command IIC_Wait_Ack(); Write_IIC_Byte(IIC_Command); IIC_Wait_Ack(); IIC_Stop(); } /********************************************** // IIC Write Data **********************************************/ void Write_IIC_Data(unsigned char IIC_Data) { IIC_Start(); Write_IIC_Byte(0x78); //D/C#=0; R/W#=0 IIC_Wait_Ack(); Write_IIC_Byte(0x40); //write data IIC_Wait_Ack(); Write_IIC_Byte(IIC_Data); IIC_Wait_Ack(); IIC_Stop(); } void OLED_WR_Byte(unsigned dat,unsigned cmd) { if(cmd) { Write_IIC_Data(dat); } else { Write_IIC_Command(dat); } } /******************************************** // fill_Picture ********************************************/ void fill_picture(unsigned char fill_Data) { unsigned char m,n; for(m=0;m<8;m++) { OLED_WR_Byte(0xb0+m,0); //page0-page1 OLED_WR_Byte(0x00,0); //low column start address OLED_WR_Byte(0x10,0); //high column start address for(n=0;n<128;n++) { OLED_WR_Byte(fill_Data,1); } } } /***********************Delay****************************************/ void Delay_50ms(unsigned int Del_50ms) { unsigned int m; for(;Del_50ms>0;Del_50ms--) for(m=6245;m>0;m--); } void Delay_1ms(unsigned int Del_1ms) { unsigned char j; while(Del_1ms--) { for(j=0;j<123;j++); } } //坐标设置 void OLED_Set_Pos(unsigned char x, unsigned char y) { OLED_WR_Byte(0xb0+y,OLED_CMD); OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD); OLED_WR_Byte((x&0x0f),OLED_CMD); } //开启OLED显示 void OLED_Display_On(void) { OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC命令 OLED_WR_Byte(0X14,OLED_CMD); //DCDC ON OLED_WR_Byte(0XAF,OLED_CMD); //DISPLAY ON } //关闭OLED显示 void OLED_Display_Off(void) { OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC命令 OLED_WR_Byte(0X10,OLED_CMD); //DCDC OFF OLED_WR_Byte(0XAE,OLED_CMD); //DISPLAY OFF } //清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!! void OLED_Clear(void) { u8 i,n; for(i=0;i<8;i++) { OLED_WR_Byte (0xb0+i,OLED_CMD); //设置页地址(0~7) OLED_WR_Byte (0x00,OLED_CMD); //设置显示位置—列低地址 OLED_WR_Byte (0x10,OLED_CMD); //设置显示位置—列高地址 for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); } //更新显示 } void OLED_On(void) { u8 i,n; for(i=0;i<8;i++) { OLED_WR_Byte (0xb0+i,OLED_CMD); //设置页地址(0~7) OLED_WR_Byte (0x00,OLED_CMD); //设置显示位置—列低地址 OLED_WR_Byte (0x10,OLED_CMD); //设置显示位置—列高地址 for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA); } //更新显示 } //在指定位置显示一个字符,包括部分字符 //x:0~127 //y:0~63 //mode:0,反白显示;1,正常显示 //size:选择字体 16/12 void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size) { unsigned char c=0,i=0; c=chr-' ';//得到偏移后的值 if(x>Max_Column-1){x=0;y=y+2;} if(Char_Size ==16) { OLED_Set_Pos(x,y); for(i=0;i<8;i++) OLED_WR_Byte(F8X16[c*16+i],OLED_DATA); OLED_Set_Pos(x,y+1); for(i=0;i<8;i++) OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA); } else { OLED_Set_Pos(x,y); for(i=0;i<6;i++) OLED_WR_Byte(F6x8[c][i],OLED_DATA); } } //m^n函数 u32 oled_pow(u8 m,u8 n) { u32 result=1; while(n--)result*=m; return result; } //显示2个数字 //x,y :起点坐标 //len :数字的位数 //size:字体大小 //mode:模式 0,填充模式;1,叠加模式 //num:数值(0~4294967295); void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2) { u8 t,temp; u8 enshow=0; for(t=0;t
120){x=0;y+=2;} j++; } } //显示汉字 void OLED_ShowCHinese(u8 x,u8 y,u8 no) { u8 t,adder=0; OLED_Set_Pos(x,y); for(t=0;t<16;t++) { OLED_WR_Byte(Hzk[2*no][t],OLED_DATA); adder+=1; } OLED_Set_Pos(x,y+1); for(t=0;t<16;t++) { OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA); adder+=1; } } /***********功能描述:显示显示BMP图片128×64起始点坐标(x,y),x的范围0~127,y为页的范围0~7*****************/ void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]) { unsigned int j=0; unsigned char x,y; if(y1%8==0) y=y1/8; else y=y1/8+1; for(y=y0;y
现在是oled.h文件,也就是这些函数的头文件,此文件内更改oled屏幕和51的连接接口。
#include "reg52.h" #ifndef __OLED_H #define __OLED_H #define u8 unsigned char #define u32 unsigned int #define OLED_CMD 0 //写命令 #define OLED_DATA 1 //写数据 #define OLED_MODE 0 sbit OLED_SCL=P3^2; //时钟线 sbit OLED_SDIN=P3^3; //数据线 #define OLED_CS_Clr() OLED_CS=0 #define OLED_CS_Set() OLED_CS=1 #define OLED_RST_Clr() OLED_RST=0 #define OLED_RST_Set() OLED_RST=1 #define OLED_DC_Clr() OLED_DC=0 #define OLED_DC_Set() OLED_DC=1 #define OLED_SCLK_Clr() OLED_SCL=0 #define OLED_SCLK_Set() OLED_SCL=1 #define OLED_SDIN_Clr() OLED_SDIN=0 #define OLED_SDIN_Set() OLED_SDIN=1 //OLED模式设置 //0:4线串行模式 //1:并行8080模式 #define SIZE 16 #define XLevelL 0x02 #define XLevelH 0x10 #define Max_Column 128 #define Max_Row 64 #define Brightness 0xFF #define X_WIDTH 128 #define Y_WIDTH 64 //-----------------OLED端口定义---------------- void delay_ms(unsigned int ms); //OLED控制用函数 void OLED_WR_Byte(unsigned dat,unsigned cmd); void OLED_Display_On(void); void OLED_Display_Off(void); void OLED_Init(void); void OLED_Clear(void); void OLED_DrawPoint(u8 x,u8 y,u8 t); void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot); void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size); void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size); void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size); void OLED_Set_Pos(unsigned char x, unsigned char y); void OLED_ShowCHinese(u8 x,u8 y,u8 no); void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]); void Delay_50ms(unsigned int Del_50ms); void Delay_1ms(unsigned int Del_1ms); void fill_picture(unsigned char fill_Data); void Picture(); void IIC_Start(); void IIC_Stop(); void Write_IIC_Command(unsigned char IIC_Command); void Write_IIC_Data(unsigned char IIC_Data); void Write_IIC_Byte(unsigned char IIC_Byte); void IIC_Wait_Ack(); #endif
现在是字体库,ASCII码中的字符,都在这个文件中,还有中文的显示,后面教大家怎么改汉字。
#ifndef __OLEDFONT_H #define __OLEDFONT_H //常用ASCII表 //偏移量32 //ASCII字符集 //偏移量32 //大小:12*6 /************************************6*8的点阵************************************/ const unsigned char code F6x8[][6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// ! 0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// " 0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// # 0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $ 0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// % 0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// & 0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// ' 0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// ( 0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// ) 0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// * 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// + 0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// , 0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// - 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// . 0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// / 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1 0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2 0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4 0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6 0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7 0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9 0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// : 0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ; 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// < 0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// = 0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// > 0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ? 0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @ 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C 0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L 0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R 0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W 0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X 0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y 0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [ 0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ] 0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^ 0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _ 0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// ' 0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a 0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b 0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c 0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d 0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e 0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n 0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o 0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p 0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r 0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s 0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w 0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x 0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines }; /****************************************8*16的点阵************************************/ const unsigned char code F8X16[]= { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94 }; //汉字 unsigned char code Hzk[][32]={ // {0x00,0x00,0xE2,0x24,0x28,0x20,0x20,0x3F,0x20,0x20,0x28,0x24,0xE2,0x00,0x00,0x00}, {0x00,0x00,0xFF,0x00,0x00,0x1F,0x11,0x11,0x11,0x1F,0x40,0x80,0x7F,0x00,0x00,0x00},/*"尚",0*/ /* (16 X 16 , 宋体 )*/ {0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0xFE,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00}, {0x40,0x38,0x01,0x00,0x3C,0x40,0x40,0x42,0x4C,0x40,0x40,0x70,0x05,0x08,0x30,0x00},/*"思",1*/ /* (16 X 16 , 宋体 )*/ {0x20,0xC2,0x0C,0x80,0x08,0x48,0x48,0x48,0x48,0x7F,0x48,0x48,0x48,0x48,0x08,0x00}, {0x04,0x04,0x7E,0x01,0x00,0x00,0xFE,0x42,0x42,0x42,0x42,0x42,0xFE,0x00,0x00,0x00},/*"洁",2*/ /* (16 X 16 , 宋体 )*/ {0x20,0x24,0x24,0xA4,0xFE,0x23,0x22,0x20,0x00,0xF8,0x08,0x08,0x08,0xF8,0x00,0x00}, {0x10,0x08,0x06,0x01,0xFF,0x01,0x06,0x00,0x00,0x3F,0x10,0x10,0x10,0x3F,0x00,0x00},/*"和",3*/ /* (16 X 16 , 宋体 )*/ {0x00,0x00,0xE2,0x24,0x28,0x20,0x20,0x3F,0x20,0x20,0x28,0x24,0xE2,0x00,0x00,0x00}, {0x00,0x00,0xFF,0x00,0x00,0x1F,0x11,0x11,0x11,0x1F,0x40,0x80,0x7F,0x00,0x00,0x00},/*"尚",0*/ /* (16 X 16 , 宋体 )*/ {0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0xFE,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00}, {0x40,0x38,0x01,0x00,0x3C,0x40,0x40,0x42,0x4C,0x40,0x40,0x70,0x05,0x08,0x30,0x00},/*"思",1*/ /* (16 X 16 , 宋体 )*/ {0x10,0x0C,0x24,0x24,0x24,0x24,0x25,0xE6,0x24,0x24,0x24,0x24,0x24,0x14,0x0C,0x00}, {0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00},/*"宇",6*/ /* (16 X 16 , 宋体 )*/ }; #endif
好了,到此4个文件齐全了,就可以显示主函数中定义的数组char str[]={0x41,0x42,0x43,0x44};
这个数组正好是ABCD4个字符,也是我屏幕上显示的字符。
下面写怎么更改中文的数组:用字模提取软件,自己去搜索吧,不想搜索的可以关注我评论中要,给你下载链接。
最后是怎么显示中文和数字的函数使用方法,绝的帮助到你了给个免费的爱心在走吧!
//这个函数显示中文 OLED_ShowCHinese(0,0,0);//尚 //第一个形参是列,第二个是行,第三个是显示哪个中文,这里一个字占16宽 OLED_ShowCHinese(18,0,1);//思 OLED_ShowCHinese(36,0,2);//洁 OLED_ShowCHinese(54,0,3);//和 OLED_ShowCHinese(72,0,4);//尚 OLED_ShowCHinese(90,0,5);//思 OLED_ShowCHinese(108,0,6);//宇 //这个函数显示字符 OLED_ShowString(6,3,"shangjiulong520",16);//第一个形参表示第六行,第二个形参表示排,第三个表示写入的字符,第四个表示字体大小 OLED_ShowString(0,6,"SJL",16); OLED_ShowString(63,6,"CODE",18); //显示数字变量 OLED_ShowNum(83,6,t,1,16); //第一个参数表示列,第二个参数表示行,第三个参数表示变量数字
明天就用这堆东西来测试串口收发数据了,之前老是看不到单片机里面的数组到底是个什么样子,这下就有了参考了。