一、监控Oracle的用户连接数
sql语句
连接数大于5的
select b.USERNAME||'->'||b.MACHINE||'->'||count(*) as connect_nums from v$process a, v$session b
where a.ADDR = b.PADDR
and b.USERNAME is not null
group by b.USERNAME,b.MACHINE, b.PROGRAM
having count(*) > 5
二、进入orabbix，编写配置文件
键值定义规则：键值自定义，比如最大连接数，定义为
max_connect.Query这是rac1_query.props实例文件中定义的，.Query是必须带上的后缀，然后在QueryList中加入自定义的键值max_connect，最后在zabbix前端配置监控项，键值为max_connect键值和
SQL语句语法：max_connect.Query=SQL，并在下一行加入max_connect.NoDataFound=none,因为得到的值是字符串，SQL获取值为空，我们就定义为none;如果有多个实例，就在每个实例文件中写入同样的配置
[root@srmc ~]# docker exec -it orabbix_zabbix bash
[root@srmc conf]# more rac1_query.props
DefaultQueryPeriod=2
QueryList=dbsize,dbfilesize,archive,audit,dbblockgets,dbconsistentgets,dbhitratio,dbphysicalread,hitratio_body,hitratio_sqlarea,hitratio_ta
ble_proc,lio_current_read,maxprocs,maxsession,miss_latch,pga_aggregate_target, pga,phio_datafile_reads,phio_datafile_writes,phio_redo_write
s,pinhitratio_body,pinhitratio_sqlarea,pinhitratio_table-proc,pinhitratio_trigger,pool_dict_cache,pool_free_mem,pool_lib_cache,pool_misc,po
ol_sql_area,procnum,session_active,session_inactive,session,session_system,sga_buffer_cache,sga_fixed,sga_java_pool,sga_large_pool,sga_log_
buffer,sga_shared_pool,tbl_space,userconn,waits_controfileio,waits_directpath_read,waits_file_io,waits_latch,waits_logwrite,waits_multibloc
k_read,waits_singleblock_read,hitratio_trigger,lio_block_changes,lio_consistent_read,waits_other,waits_sqlnet,users_locked,uptime,temp_tabl
espace,invalid_object,locks,sga_shared_hit,sga_buffer_cache_hit,sga_log_nowait,rman_check_status,sqlrush_procedure,sqlrush_trigger,asm_arch
_used,log_seq,asm_free,asm_used,strmaxconnect,max_connect
#------------------------------数据库信息-----------------------------------------------------------------
#数据库数据文件总大小(表空间总和大小)
dbfilesize.Query=select to_char(sum(bytes/1024/1024/1024), 'FM99999999999999990') retvalue from dba_data_files
#数据库大小（实际数据大小）
dbsize.Query=SELECT to_char(sum( NVL(a.bytes/1024/1024/1024 - NVL(f.bytes/1024/1024/1024, 0), 0)), 'FM99999999999999990') retvalue \
FROM sys.dba_tablespaces d, \
(select tablespace_name, sum(bytes) bytes from dba_data_files group by tablespace_name) a, \
(select tablespace_name, sum(bytes) bytes from dba_free_space group by tablespace_name) f \
WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+) \
AND NOT (d.extent_management like 'LOCAL' AND d.contents like 'TEMPORARY')
#数据库锁数量
locks.Query=select count(1) lock_num \
from v$locked_object t1, v$session t2, dba_objects t3, gv$lock t4 \
where t1.session_id = t2.sid \
and t1.object_id = t3.object_id \
and t2.sid = t4.SID \
and t2.LAST_CALL_ET > 120 \
and t2.status = 'ACTIVE' \
order by t2.logon_time
#数据库运行时间
uptime.Query=select to_char((sysdate-startup_time)*86400, 'FM99999999999999990') retvalue from v$instance
#数据库登陆审计
audit.Query=select username "username", \
to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') "time_stamp", \
action_name "statement", \
os_username "os_username", \
userhost "userhost", \
returncode||decode(returncode,'1004','-Wrong Connection','1005','-NULL Password','1017','-Wrong Password','1045','-Insufficient Priviledg
e','0','-Login Accepted','--') "returncode" \
from sys.dba_audit_session \
where (sysdate - timestamp)*24 < 1 and returncode <> 0 \
order by timestamp
audit.NoDataFound=none
#监控失效项个数
invalid_object.Query=SELECT COUNT(1) FROM dba_objects WHERE status = 'INVALID' and OWNER NOT IN ('SYS','PUBLIC','SYSTEM')
#用户连接数
userconn.Query=select count(username) from v$session where username is not null
#用户是否被锁
users_locked.Query=SELECT username||' '|| lock_date ||' '|| account_status FROM dba_users where ACCOUNT_STATUS like 'EXPIRED(GRACE)' or ACC
OUNT_STATUS like 'LOCKED(TIMED)'
users_locked.NoDataFound=none
#ASM使用情况，后面条件表示设备名称，需要根据实际情况修改
asm_free.Query=select to_char(free_mb,'FM99999999999999990') as free_disk from v$asm_diskgroup where name='DATA'
asm_used.Query=select to_char(TOTAL_MB - FREE_MB,'FM99999999999999990') as used_disk from v$asm_diskgroup where name='DATA'
#连接数最大的客户端
strmaxconnect.Query=select MACHINE||':'||nums as info from ( select b.MACHINE as machine,count(1) as nums from v$process a, v$session b wh
ere a.ADDR = b.PADDR and b.USERNAME is not null group by b.MACHINE, b.PROGRAM order by count(*) desc ) where rownum =1
#---------------------------------------------------------------------------------------------------------
#-------------------------------------归档和备份-----------------------------------------------------------
#归档日志目录使用率,后面条件表示设备名称，需要根据实际情况修改
asm_arch_used.Query=select round(((t.total_mb-t.free_mb)/t.total_mb)*100,2) as ARCHDG_PERC from v$asm_diskgroup t where t.name = 'DATA'
#归档频率
archive.Query=select round(A.LOGS*B.AVG/1024/1024/10) from ( SELECT COUNT (*) LOGS FROM V$LOG_HISTORY WHERE FIRST_TIME >= (sysdate -10/60/
24)) A, ( SELECT Avg(BYTES) AVG, Count(1), Max(BYTES) Max_Bytes, Min(BYTES) Min_Bytes FROM v$log) B
archive.RaceConditionQuery=select value from v$parameter where name='log_archive_start'
archive.RaceConditionValue=FALSE
#闪回区使用率
#flash_recovery_area_usage.Query=select sum(PERCENT_SPACE_USED) from v$flash_recovery_area_usage
#rman备份情况
rman_check_status.Query=select STATUS FROM V$RMAN_STATUS WHERE start_time > SYSDATE - 1 and OPERATION = 'RMAN'
#最大归档日志序列号
log_seq.Query=select max(sequence#) from v$archived_log
#-------------------------------------------------------------------------------------------------------
#------------------------------------processes和session--------------------------------------------------
#设置的最大进程数
maxprocs.Query=select value "maxprocs" from v$parameter where name ='processes'
#当前使用的进程数
procnum.Query=select count(*) "procnum" from v$process
#设置的最大会话数
maxsession.Query=select value "maxsess" from v$parameter where name ='sessions'
#当前活动的会话数
session_active.Query=select count(*) from v$session where TYPE!='BACKGROUND' and status='ACTIVE'
#当前非活动状态的会话数
session_inactive.Query=select SUM(Decode(Type, 'BACKGROUND', 0, Decode(Status, 'ACTIVE', 0, 1))) FROM V$SESSION
#当前所有的会话数
session.Query=select count(*) from v$session
#oracle自己占用的会话数
session_system.Query=select SUM(Decode(Type, 'BACKGROUND', 1, 0)) system_sessions FROM V$SESSION
#--------------------------------------------------------------------------------------------------------
#---------------------------------------------------SGA和PGA---------------------------------------------
#SGA使用情况
#buffer cache大小
sga_buffer_cache.Query=SELECT to_char(ROUND(SUM(decode(pool,NULL,decode(name,'db_block_buffers',(bytes)/(1024*1024),'buffer_cache',(bytes)/
(1024*1024),0),0)),2)) sga_bufcache FROM V$SGASTAT
#buffer cache命中率
sga_buffer_cache_hit.Query=SELECT round((1 - (PHYSICAL_READS / (DB_BLOCK_GETS + CONSISTENT_GETS)))*100,2) "Hit Ratio" FROM V$BUFFER_POOL_ST
ATISTICS WHERE NAME='DEFAULT'
#固定SGA区域大小
sga_fixed.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,NULL,decode(name,'fixed_sga',(bytes)/(1024*1024),0),0)),2)) sga_fixed FROM V$SGASTAT
#java池大小
sga_java_pool.Query=SELECT to_char(ROUND(SUM(decode(pool,'java pool',(bytes)/(1024*1024),0)),2)) sga_jpool FROM V$SGASTAT
#大池大小
sga_large_pool.Query=SELECT to_char(ROUND(SUM(decode(pool,'large pool',(bytes)/(1024*1024),0)),2)) sga_lpool FROM V$SGASTAT
#日志缓冲区大小
sga_log_buffer.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,NULL,decode(name,'log_buffer',(bytes)/(1024*1024),0),0)),2)) sga_lbuffer FROM V$S
GASTAT
#redo log wait
sga_log_nowait.Query=select round((1-waits.value/redos.value)*100,2)"redo nowait" from v$sysstat waits,v$sysstat redos where waits.NAME='re
do log space requests' and redos.NAME='redo entries'
#共享池大小
sga_shared_pool.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'library cache',0,'dictionary cache',0,'free memory',0
,'sql area',0,(bytes)/(1024*1024)),0)),2)) pool_misc FROM V$SGASTAT
#共享池命中率
sga_shared_hit.Query=select sum(pinhits-reloads)/sum(pins)*100 "hit radio" from v$librarycache
#PGA使用情况
pga_aggregate_target.Query=select to_char(decode( unit,'bytes', value/1024/1024, value),'999999999.9') value from V$PGASTAT where name in '
aggregate PGA target parameter'
pga.Query=select to_char(decode( unit,'bytes', value/1024/1024, value),'999999999.9') value from V$PGASTAT where name in 'total PGA inuse'
#共享池使用情况
pool_dict_cache.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'dictionary cache',(bytes)/(1024*1024),0),0)),2)) pool
_dict_cache FROM V$SGASTAT
pool_free_mem.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'free memory',(bytes)/(1024*1024),0),0)),2)) pool_free_m
em FROM V$SGASTAT
pool_lib_cache.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'library cache',(bytes)/(1024*1024),0),0)),2)) pool_lib
_cache FROM V$SGASTAT
pool_misc.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'library cache',0,'dictionary cache',0,'free memory',0,'sql
area', 0,(bytes)/(1024*1024)),0)),2)) pool_misc FROM V$SGASTAT
pool_sql_area.Query=SELECT TO_CHAR(ROUND(SUM(decode(pool,'shared pool',decode(name,'sql area',(bytes)/(1024*1024),0),0)),2)) pool_sql_area
FROM V$SGASTAT
#Library Cache 命中率
pinhitratio_body.Query=select pins/(pins+reloads)*100 "pin_hit ratio" FROM v$librarycache where namespace ='BODY'
pinhitratio_sqlarea.Query=select pins/(pins+reloads)*100 "pin_hit ratio" FROM v$librarycache where namespace ='SQL AREA'
pinhitratio_table-proc.Query=select pins/(pins+reloads)*100 "pin_hit ratio" FROM v$librarycache where namespace ='TABLE/PROCEDURE'
pinhitratio_trigger.Query=select pins/(pins+reloads)*100 "pin_hit ratio" FROM v$librarycache where namespace ='TRIGGER'
hitratio_body.Query=select gethitratio*100 "get_pct" FROM v$librarycache where namespace ='BODY'
hitratio_sqlarea.Query=select gethitratio*100 "get_pct" FROM v$librarycache where namespace ='SQL AREA'
hitratio_trigger.Query=select gethitratio*100 "get_pct" FROM v$librarycache where namespace ='TRIGGER'
hitratio_table_proc.Query=select gethitratio*100 "get_pct" FROM v$librarycache where namespace = 'TABLE/PROCEDURE'
#----------------------------------------------------------------------------------------------------------
#--------------------------------------------------表空间---------------------------------------------------
#临时表空间使用率
temp_tablespace.Query=select to_char(used_percent,'99.99') from dba_tablespace_usage_metrics where tablespace_name='TEMP'
#数据表空间使用率,使用率超过94%并且剩余空间少于10G
tbl_space.Query=SELECT ktablespace||' Used(%):'||kperc||'% Used(GB):'||ktbs_em_uso||'GB Free:'||kfree_space||'MB' as info FROM ( \
select '- Tablespace ->',t.tablespace_name ktablespace, \
'- Type->',substr(t.contents, 1, 1) tipo, \
'- Used(GB)->',trunc((d.tbs_size-nvl(s.free_space, 0))/1024/1024/1024) ktbs_em_uso, \
'- ActualSize(MB)->',trunc(d.tbs_size/1024/1024) ktbs_size, \
'- MaxSize(MB)->',trunc(d.tbs_maxsize/1024/1024) ktbs_maxsize, \
'- FreeSpace(GB)->',trunc(nvl(s.free_space, 0)/1024/1024) kfree_space, \
'- Space->',trunc((d.tbs_maxsize - d.tbs_size + nvl(s.free_space, 0))/1024/1024) kspace, \
'- Perc->',decode(d.tbs_maxsize, 0, 0, trunc((d.tbs_size-nvl(s.free_space, 0))*100/d.tbs_maxsize)) kperc \
from \
( select SUM(bytes) tbs_size, \
SUM(decode(sign(maxbytes - bytes), -1, bytes, maxbytes)) tbs_maxsize, tablespace_name tablespace \
from ( select nvl(bytes, 0) bytes, nvl(maxbytes, 0) maxbytes, tablespace_name \
from dba_data_files \
union all \
select nvl(bytes, 0) bytes, nvl(maxbytes, 0) maxbytes, tablespace_name \
from dba_temp_files \
) \
group by tablespace_name \
) d, \
( select SUM(bytes) free_space, \
tablespace_name tablespace \
from dba_free_space \
group by tablespace_name \
) s, \
dba_tablespaces t \
where t.tablespace_name = d.tablespace(+) and \
t.tablespace_name = s.tablespace(+) \
order by 8) \
where kperc > 93 \
and kfree_space < 10240 \
and tipo <>'T' \
and tipo <>'U'
tbl_space.NoDataFound=none
#-------------------------------------------------------------------------------------------------------
#--------------------------------------------------等待事件----------------------------------------------
waits_controfileio.Query=SELECT to_char(sum(decode(event,'control file sequential read', total_waits, 'control file single write', total_wa
its, 'control file parallel write',total_waits,0))) ControlFileIO FROM V$system_event WHERE 1=1 AND event not in ( 'SQL*Net message from cl
ient', 'SQL*Net more data from client','pmon timer', 'rdbms ipc message', 'rdbms ipc reply', 'smon timer')
waits_directpath_read.Query=SELECT to_char(sum(decode(event,'direct path read',total_waits,0))) DirectPathRead FROM V$system_event WHERE 1=
1 AND event not in ('SQL*Net message from ', 'SQL*Net more data from client','pmon timer', 'rdbms ipc message', 'rdbms ipc reply', 'smon ti
mer')
waits_file_io.Query=SELECT to_char(sum(decode(event,'file identify',total_waits, 'file open',total_waits,0))) FileIO FROM V$system_event WH
ERE 1=1 AND event not in ( 'SQL*Net message from client', 'SQL*Net more data from client', 'pmon timer', 'rdbms ipc message', 'rdbms ip
c reply', 'smon timer')
waits_latch.Query=SELECT to_char(sum(decode(event,'control file sequential read', total_waits, \
'control file single write', total_waits, 'control file parallel write',total_waits,0))) ControlFileIO \
FROM V$system_event WHERE 1=1 AND event not in ( \
'SQL*Net message from client', \
'SQL*Net more data from client', \
'pmon timer', 'rdbms ipc message', \
'rdbms ipc reply', 'smon timer')
waits_logwrite.Query=SELECT to_char(sum(decode(event,'log file single write',total_waits, 'log file parallel write',total_waits,0))) LogWri
te \
FROM V$system_event WHERE 1=1 AND event not in ( \
'SQL*Net message from client', \
'SQL*Net more data from client', \
'pmon timer', 'rdbms ipc message', \
'rdbms ipc reply', 'smon timer')
waits_multiblock_read.Query=SELECT to_char(sum(decode(event,'db file scattered read',total_waits,0))) MultiBlockRead \
FROM V$system_event WHERE 1=1 AND event not in ( \
'SQL*Net message from client', \
'SQL*Net more data from client', \
'pmon timer', 'rdbms ipc message', \
'rdbms ipc reply', 'smon timer')
waits_other.Query=SELECT to_char(sum(decode(event,'control file sequential read',0,'control file single write',0,'control file parallel wri
te',0,'db file sequential read',0,'db file scattered read',0,'direct path read',0,'file identify',0,'file open',0,'SQL*Net message to clien
t',0,'SQL*Net message to dblink',0, 'SQL*Net more data to client',0,'SQL*Net more data to dblink',0, 'SQL*Net break/reset to client',0,'SQL
*Net break/reset to dblink',0, 'log file single write',0,'log file parallel write',0,total_waits))) Other FROM V$system_event WHERE 1=1 AND
event not in ( 'SQL*Net message from client', 'SQL*Net more data from client', 'pmon timer', 'rdbms ipc message', 'rdbms ipc reply', 'sm
on timer')
waits_singleblock_read.Query=SELECT to_char(sum(decode(event,'db file sequential read',total_waits,0))) SingleBlockRead \
FROM V$system_event WHERE 1=1 AND event not in ( \
'SQL*Net message from client', \
'SQL*Net more data from client', \
'pmon timer', 'rdbms ipc message', \
'rdbms ipc reply', 'smon timer')
waits_sqlnet.Query=SELECT to_char(sum(decode(event,'SQL*Net message to client',total_waits,'SQL*Net message to dblink',total_waits,'SQL*Net
more data to client',total_waits,'SQL*Net more data to dblink',total_waits,'SQL*Net break/reset to client',total_waits,'SQL*Net break/rese
t to dblink',total_waits,0))) SQLNET FROM V$system_event WHERE 1=1 \
AND event not in ( 'SQL*Net message from client','SQL*Net more data from client','pmon timer','rdbms ipc message','rdbms ipc reply', 'smon
timer')
#--------------------------------------------------------------------------------------------------------
#--------------------------------------------------读写性能-----------------------------------------------
dbblockgets.Query=select to_char(sum(decode(name,'db block gets', value,0))) "block_gets" FROM v$sysstat
dbconsistentgets.Query=select to_char(sum(decode(name,'consistent gets', value,0))) "consistent_gets" FROM v$sysstat
dbhitratio.Query=select ( \
sum(decode(name,'consistent gets', value,0)) + sum(decode(name,'db block gets', value,0)) - sum(decode(name,'physical reads', value,0)))
/ (sum(decode(name,'consistent gets', value,0)) + sum(decode(name,'db block gets', value,0)) ) * 100 "hit_ratio" \
FROM v$sysstat
dbphysicalread.Query=select sum(decode(name,'physical reads', value,0)) "phys_reads" FROM v$sysstat
sqlnotindexed.Query=SELECT SUM(DECODE(NAME, 'table scans (long tables)', VALUE, 0))/ (SUM(DECODE(NAME, 'table scans (long tables)', VALUE,
0))+SUM(DECODE(NAME, 'table scans (short tables)', VALUE, 0)))*100 SQL_NOT_INDEXED FROM V$SYSSTAT WHERE 1=1 AND ( NAME IN ('table scans (lo
ng tables)','table scans (short tables)') )
lio_block_changes.Query=SELECT to_char(SUM(DECODE(NAME,'db block changes',VALUE,0))) \
FROM V$SYSSTAT \
WHERE NAME ='db block changes'
lio_consistent_read.Query=SELECT to_char(sum(decode(name,'consistent gets',value,0))) FROM V$SYSSTAT WHERE NAME ='consistent gets'
lio_current_read.Query=SELECT to_char(sum(decode(name,'db block gets',value,0))) FROM V$SYSSTAT WHERE NAME ='db block gets'
miss_latch.Query=SELECT SUM(misses) FROM V$LATCH
#物理读大小
phio_datafile_reads.Query=select to_char(sum(decode(name,'physical reads direct',value,0))) FROM V$SYSSTAT where name ='physical reads dire
ct'
#物理写大小
phio_datafile_writes.Query=select to_char(sum(decode(name,'physical writes direct',value,0))) FROM V$SYSSTAT where name ='physical writes d
irect'
phio_redo_writes.Query=select to_char(sum(decode(name,'redo writes',value,0))) FROM V$SYSSTAT where name ='redo writes'
#----------------------------------------------------------------------------------------------------------
#---------------------------------------------其他---------------------------------------------------------
#监控勒索病毒
sqlrush_procedure.Query=SELECT OWNER FROM ALL_PROCEDURES WHERE PROCEDURE_NAME IN ('DBMS_SUPPORT_INTERNAL','DBMS_STANDARD_FUN9','DBMS_SYSTEM
_INTERNA','DBMS_CORE_INTERNAL')
sqlrush_procedure.NoDataFound=none
sqlrush_trigger.Query=SELECT OWNER FROM ALL_TRIGGERS WHERE TRIGGER_NAME IN ('DBMS_SUPPORT_INTERNAL','DBMS_ SYSTEM _INTERNAL','DBMS_ CORE _I
NTERNAL')
sqlrush_trigger.NoDataFound=none
#----------------------------------------------------------------------------------------------------------
#Oracle的用户连接数（大于100）
max_connect.Query=select b.USERNAME||'->'||b.MACHINE||'->'||count(*) as connect_nums from v$process a, v$session b where a.ADDR = b.PADDR a
nd b.USERNAME is not null group by b.USERNAME,b.MACHINE, b.PROGRAM having count(*) > 100
max_connect.NoDataFound=none
附带config.props配置文件
[root@srmc conf]# more config.props
#固定参数
OrabbixDaemon.PidFile=./orabbix.pid
OrabbixDaemon.Sleep=300
OrabbixDaemon.MaxThreadNumber=100
DatabaseList.MaxActive=10
DatabaseList.MaxWait=100
DatabaseList.MaxIdle=1
#可变参数
#comma separed list of Zabbix servers
#ZabbixServerList=zabbix
#zabbix.Address=localhost
#zabbix.Port=10051
ZabbixServerList=zabbix
zabbix.Address=192.18.100.181
zabbix.Port=10051
#put here your databases in a comma separated list
DatabaseList=192.18.100.10,192.18.100.11,192.18.101.187
#define here your connection string for each database
#DB1.Url=jdbc:oracle:thin:@192.168.10.89:1521:orcl
#DB1.User=zabbix
#DB1.Password=zabbix
#DB1.QueryListFile=./conf/query.props
192.18.100.10.Url=jdbc:oracle:thin:@192.18.100.10:1521/zjyyhis
192.18.100.10.User=zabbix
192.18.100.10.Password=zabbix
192.18.100.10.QueryListFile=./conf/rac1_query.props
192.18.100.11.Url=jdbc:oracle:thin:@192.18.100.11:1521/zjyyhis
192.18.100.11.User=zabbix
192.18.100.11.Password=zabbix
192.18.100.11.QueryListFile=./conf/rac2_query.props
192.18.101.187.Url=jdbc:oracle:thin:@192.18.101.187:1521/hlht
192.18.101.187.User=zabbix
192.18.101.187.Password=zabbix
192.18.101.187.QueryListFile=./conf/singleInstances_query.props
三、重启orabbix,并查看日志
[root@srmc ~]# docker restart orabbix_zabbix
[root@srmc ~]# cd /opt/logs/
[root@srmc logs]# ls
orabbix.log orabbix.log.1
[root@srmc logs]# tailf orabbix.log
2022-06-23 02:10:49,580 [pool-1-thread-94] INFO Orabbix - Done with dbJob on database 192.18.101.187 QueryList elapsed time 1634 ms
2022-06-23 02:10:57,417 [pool-1-thread-96] INFO Orabbix - Done with dbJob on database 192.18.100.11 QueryList elapsed time 9473 ms
2022-06-23 02:11:09,857 [pool-1-thread-91] INFO Orabbix - Done with dbJob on database 192.18.100.10 QueryList elapsed time 21913 ms
2022-06-23 02:11:47,951 [pool-1-thread-95] INFO Orabbix - Done with dbJob on database 192.18.100.10 QueryList elapsed time 4 ms
2022-06-23 02:11:47,951 [pool-1-thread-99] INFO Orabbix - Done with dbJob on database 192.18.100.11 QueryList elapsed time 3 ms
2022-06-23 02:11:47,951 [pool-1-thread-98] INFO Orabbix - Done with dbJob on database 192.18.101.187 QueryList elapsed time 3 ms
2022-06-23 02:12:49,319 [pool-1-thread-2] INFO Orabbix - Done with dbJob on database 192.18.101.187 QueryList elapsed time 1369 ms
2022-06-23 02:12:58,125 [pool-1-thread-100] INFO Orabbix - Done with dbJob on database 192.18.100.11 QueryList elapsed time 10175 ms
2022-06-23 02:13:09,831 [pool-1-thread-97] INFO Orabbix - Done with dbJob on database 192.18.100.10 QueryList elapsed time 21882 ms
四、Zabbix前端配置监控项
image.png
五、配置触发器
- 触发器解释：配置文件中定义连接数大于
100就触发告警，若是没有达到100，就返回值none，因为，这里定义触发器，如果str(none)=0,-----ps：0=未找到，1=找到。 当未找到none的时候就触发告警。
image.png