标签
PostgreSQL , ms sql , SQL Server
背景
本文介绍MS SQL on Linux的简单部署,使用。
https://docs.microsoft.com/zh-cn/sql/linux/quickstart-install-connect-red-hat?view=sql-server-2017
后面简单介绍如何将MS SQL迁移到PostgreSQL。
1 环境
CentOS 7.x x64 ECS
2 环境配置
参考MS SQL 如下链接
https://docs.microsoft.com/zh-cn/sql/linux/sql-server-linux-performance-best-practices?view=sql-server-2017
或参考PostgreSQL OS部分的配置
《PostgreSQL 10 on ECS 实施 流复制备库镜像+自动快照备份+自动备份验证+自动清理备份与归档 - 珍藏级》
《PostgreSQL 10 + PostGIS + Sharding(pg_pathman) + MySQL(fdw外部表) on ECS 部署指南(适合新用户) - 珍藏级》
《PostgreSQL on Linux 最佳部署手册 - 珍藏级》
vi /etc/sysctl.conf
kernel.sched_min_granularity_ns = 10000000
kernel.sched_wakeup_granularity_ns = 15000000
vm.swappiness=0
kernel.numa_balancing=0
vm.max_map_count=262144
sysctl -p
3 安装mssql数据库软件
curl -o /etc/yum.repos.d/mssql-server.repo https://packages.microsoft.com/config/rhel/7/mssql-server-2017.repo
cat /etc/yum.repos.d/mssql-server.repo
yum install -y mssql-server
4 安装mssql客户端软件
curl -o /etc/yum.repos.d/msprod.repo https://packages.microsoft.com/config/rhel/7/prod.repo
yum remove unixODBC-utf16 unixODBC-utf16-devel
yum install -y mssql-tools unixODBC-devel
5 查看安装位置
查看rpm包的安装位置,方便后面配置文件的设置。
rpm -ql mssql-tools
rpm -ql mssql-server
6 配置环境变量
可以将配置放到mssql user shell默认配置中。
su - mssql
vi .bash_profile
export PATH="/opt/mssql-tools/bin:/opt/mssql/bin:$PATH"
export LD_LIBRARY_PATH="/opt/mssql/lib:$LD_LIBRARY_PATH"
7 配置systemd服务
/opt/mssql/bin/mssql-conf setup
输入MS SQL超级用户SA密码
密码输入
8 查看mssql-server服务状态
systemctl status mssql-server
当前数据库未启动
mssql-server.service - Microsoft SQL Server Database Engine
Loaded: loaded (/usr/lib/systemd/system/mssql-server.service; disabled; vendor preset: disabled)
Active: inactive (dead)
Docs: https://docs.microsoft.com/en-us/sql/linux
Aug 19 10:20:18 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:18.81 spid29s The Service Broker endpoint is in disabled or stopped state.
Aug 19 10:20:18 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:18.81 spid29s The Database Mirroring endpoint is in disabled or stopped state.
Aug 19 10:20:18 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:18.83 spid29s Service Broker manager has started.
Aug 19 10:20:18 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:18.84 spid10s Recovery is complete. This is an informational message only. No user action is required.
Aug 19 10:20:30 iZbp13nu0s9j3x3op4zpd4Z systemd[1]: Stopping Microsoft SQL Server Database Engine...
Aug 19 10:20:30 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:30.43 spid10s Always On: The availability replica manager is going offline because SQL Server is shutting down. This is an informational mess...ion is required.
Aug 19 10:20:30 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:30.43 spid10s SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. ...ion is required.
Aug 19 10:20:30 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:30.53 spid29s Service Broker manager has shut down.
Aug 19 10:20:30 iZbp13nu0s9j3x3op4zpd4Z sqlservr[2371]: 2018-08-19 10:20:30.63 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Aug 19 10:20:31 iZbp13nu0s9j3x3op4zpd4Z systemd[1]: Stopped Microsoft SQL Server Database Engine.
Hint: Some lines were ellipsized, use -l to show in full.
9 查看systemd服务配置
cat /usr/lib/systemd/system/mssql-server.service
[Unit]
Description=Microsoft SQL Server Database Engine
After=network.target auditd.service
Documentation=https://docs.microsoft.com/en-us/sql/linux
[Service]
ExecStart=/opt/mssql/bin/sqlservr
User=mssql
WorkingDirectory=/var/opt/mssql
Kill root process
KillMode=process
Wait up to 30 seconds for service to start/stop
TimeoutSec=30min
Remove process, file, thread limits
LimitNPROC=infinity
LimitNOFILE=infinity
TasksMax=infinity
UMask=007
Restart on non-successful exits.
Restart=on-failure
Don't restart if we've restarted more than 3 times in 2 minutes.
StartLimitInterval=120
StartLimitBurst=3
[Install]
WantedBy=multi-user.target
10 systemd服务配置 - 默认MSSQL数据,日志目录
cat /usr/lib/systemd/system/mssql-server.service
WorkingDirectory=/var/opt/mssql
工作目录内容
ll -la /var/opt/mssql
ll -la /data02/mssql/mssql
total 40
drwxrwx--- 6 mssql mssql 4096 Aug 19 12:04 .
drwxr-xr-x 3 mssql mssql 4096 Aug 19 12:06 ..
-rw------- 1 mssql mssql 64 Aug 19 12:04 .bash_history
-rw-rw-r-- 1 mssql mssql 114 Aug 19 12:04 .bash_profile
drwxr-xr-x 2 mssql mssql 4096 Aug 19 10:00 data
drwxr-xr-x 2 mssql mssql 4096 Aug 19 11:50 log
-rw-rw-r-- 1 mssql mssql 51 Aug 19 10:51 mssql.conf
drwxr-xr-x 2 mssql mssql 4096 Aug 19 09:53 secrets
drwxr-xr-x 5 mssql mssql 4096 Aug 19 09:53 .system
-rw------- 1 mssql mssql 727 Aug 19 12:04 .viminfo
11 配置操作系统防火墙
开放端口,允许其他服务器连接MS SQL。
sudo firewall-cmd --zone=public --add-port=1433/tcp --permanent
sudo firewall-cmd --reload
12 关闭systemd自动启动服务
systemctl disable mssql-server
13 启动MSSQL数据库
systemctl start mssql-server
14 关闭MSSQL数据库
systemctl stop mssql-server
15 转移mssql data, log目录 (WorkingDirectory)
1、停库
systemctl stop mssql-server
2、确认已停库
systemctl status mssql-server
3、转移WorkingDirectory目录
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vdc1 1.5T 517G 940G 36% /data02
/dev/vdb1 1.5T 955G 501G 66% /data01
转移到数据目录
mkdir /data02/mssql
chown mssql:mssql /data02/mssql
mv /var/opt/mssql /data02/mssql/
ln -s /data02/mssql/mssql /var/opt/mssql
4、重启mssql
systemctl start mssql-server
5、查看启动状态
systemctl status mssql-server
mssql-server.service - Microsoft SQL Server Database Engine
Loaded: loaded (/usr/lib/systemd/system/mssql-server.service; disabled; vendor preset: disabled)
Active: active (running) since Sun 2018-08-19 12:17:54 CST; 3s ago
Docs: https://docs.microsoft.com/en-us/sql/linux
Main PID: 7145 (sqlservr)
CGroup: /system.slice/mssql-server.service
├─7145 /opt/mssql/bin/sqlservr
└─7147 /opt/mssql/bin/sqlservr
Aug 19 12:17:57 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:57.64 Server Node configuration: node 3: CPU mask: 0x00aaaaaaa0000000:0 Active CPU mask: 0x00aaaaaaa0000000:0. This message provides a descr...ion is required.
Aug 19 12:17:57 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:57.94 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informa...ion is required.
Aug 19 12:17:57 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:57.94 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
Aug 19 12:17:57 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:57.96 Server In-Memory OLTP initialized on highend machine.
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:58.01 Server Database Instant File Initialization: enabled. For security and performance considerations see the topic 'Database Instant File...ion is required.
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: ForceFlush is enabled for this instance.
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:58.02 Server Query Store settings initialized with enabled = 1,
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:58.03 Server Software Usage Metrics is disabled.
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: 2018-08-19 12:17:58.04 spid11s Starting up database 'master'.
Aug 19 12:17:58 iZbp13nu0s9j3x3op4zpd4Z sqlservr[7145]: ForceFlush feature is enabled for log durability.
Hint: Some lines were ellipsized, use -l to show in full.
16 使用 sqlcmd客户端连接 mssql
使用sqlcmd cli,连接mssql,测试
sqlcmd -S localhost -U SA -P ''
CREATE DATABASE TestDB
SELECT Name from sys.Databases
GO
USE TestDB
CREATE TABLE Inventory (id INT, name NVARCHAR(50), quantity INT)
INSERT INTO Inventory VALUES (1, 'banana', 150); INSERT INTO Inventory VALUES (2, 'orange', 154);
GO
SELECT * FROM Inventory WHERE quantity > 152;
GO
QUIT
17 mssql 简单性能测试
https://docs.microsoft.com/zh-cn/sql/linux/sql-server-linux-performance-get-started?view=sql-server-2017
18 配置数据库参数
https://docs.microsoft.com/zh-cn/sql/linux/sql-server-linux-configure-mssql-conf?view=sql-server-2017
例如
vi /var/opt/mssql/mssql.conf
[sqlagent] enabled = false
[EULA] accepteula = Y
[network] ipaddress = 10.31.124.69 tcpport = 1433
[memory] memorylimitmb = 16384
重启实例 systemctl restart mssql-server
参考
man sqlservr
man mssql-conf
https://docs.microsoft.com/zh-cn/sql/linux/sql-server-linux-overview?view=sql-server-2017
《PostgreSQL 10 on ECS 实施 流复制备库镜像+自动快照备份+自动备份验证+自动清理备份与归档 - 珍藏级》
《PostgreSQL 10 + PostGIS + Sharding(pg_pathman) + MySQL(fdw外部表) on ECS 部署指南(适合新用户) - 珍藏级》
《PostgreSQL on Linux 最佳部署手册 - 珍藏级》