基本模样已经完成。左右双屏各自显示的内容也已完成。左边只显示时间,右边只显示天气。
网上的方案是单屏循环显示时间和天气,屏幕小,我总觉得不过瘾,所以改成双屏,也变相地加大了屏幕面积,难度没怎么增加。
原来只显示英文,这也是esp01s的缺点,内存太小,只有1M,显示完全中文很难实现。但我改成了显示星期,好看点,内存里面只增加“星期一二三四五六日”这9个汉字,占用内存小。下一步打算反农历也加上去,研究了一下,C++计算农历还挺麻烦,不如python,一个库就搞定了。慢慢 研究,应该可以做完。下面是左右屏的代码。我是在别的代码上改的,肯定有些没用的代码,暂时还没精减,而且我的C++也是刚接触,很多代码我都不敢动,动一下可能就出问题。大神不要笑!再次感谢开源的大神!
还有件事没说,打算买个3D打印机打印外壳,做完可能就更好看点,又要学习3D画图了。我还有几个类似的东西,也一齐做出外壳,弄个全家福啥的。
#include
#include
#include
#include
#include
#include
#include "SH1106Wire.h" //1.3寸
//#include "SSD1306Wire.h" //0.96寸
const char* WIFI_SSID = "******"; //WIFI名称及密码
const char* WIFI_PWD = "12345678";
const String WDAY_NAMES[] = {"Sum", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"}; //星期
#define TZ 8 // 时区为8
#define DST_MN 0 // 默认为0
#define TZ_MN ((TZ)*60)
#define TZ_SEC ((TZ)*3600)
#define DST_SEC ((DST_MN)*60)
time_t now;
long timeSinceLastWUpdate = 0; //上次更新后的时间
const int UPDATE_INTERVAL_SECS = 5 * 60; // 5分钟更新一次
const int I2C_DISPLAY_ADDRESS = 0x3c; //I2c地址默认
#if defined(ESP8266)
const int SDA_PIN = 2; //引脚,如果显示屏不亮,就是引脚接反了。
const int SDC_PIN = 0;
#endif
SH1106Wire display(I2C_DISPLAY_ADDRESS, SDA_PIN, SDC_PIN);//1.3寸
//SSD1306Wire display(I2C_DISPLAY_ADDRESS, SDA_PIN, SDC_PIN); // 0.96寸
void drawDateTime();//函数声明
void wificonnect() { //WIFI连接
WiFi.begin(WIFI_SSID, WIFI_PWD);
while (WiFi.status() != WL_CONNECTED) {
Serial.print('.');
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait.");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait..");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait...");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait....");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait.....");
display.display();
delay(80);
display.clear();
display.setFont(ArialMT_Plain_24);
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawString(10, 18, "wait......");
display.display();
delay(80);
}
Serial.println("");
delay(500);
}
//汉字字模
const unsigned char xing[] U8X8_PROGMEM = {
0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08, 0xF8, 0x0F, 0x08, 0x08, 0xF8, 0x0F, 0x80, 0x00, 0x88, 0x00,
0xF8, 0x1F, 0x84, 0x00, 0x82, 0x00, 0xF8, 0x0F, 0x80, 0x00, 0x80, 0x00, 0xFE, 0x3F, 0x00, 0x00
}; /*星*/
const unsigned char qi[] U8X8_PROGMEM = {
0x44,0x00,0x44,0x3E,0xFE,0x22,0x44,0x22,0x44,0x22,0x7C,0x3E,0x44,0x22,0x44,0x22,
0x7C,0x22,0x44,0x3E,0x44,0x22,0xFF,0x22,0x20,0x21,0x44,0x21,0x82,0x28,0x41,0x10
}; /*期*/
const unsigned char yue[] U8X8_PROGMEM = {
0x00,0x00,0xF8,0x1F,0x08,0x10,0x08,0x10,0x08,0x10,0xF8,0x1F,0x08,0x10,0x08,0x10,
0x08,0x10,0xF8,0x1F,0x08,0x10,0x08,0x10,0x04,0x10,0x04,0x10,0x02,0x14,0x01,0x08
/*"月"*/
};
const unsigned char ri[] U8X8_PROGMEM = {
0x00,0x00,0xF8,0x0F,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xF8,0x0F,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xF8,0x0F,0x08,0x08
};/*"日"*/
const unsigned char yi[] U8X8_PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};/*"一"*/
const unsigned char er[] U8X8_PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x00,0x00,0x00,0x00,0x00,0x00
};/*"二",0*/
const unsigned char san[] U8X8_PROGMEM = {
0x00,0x00,0x00,0x00,0xFE,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0x1F,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x00,0x00,0x00,0x00
};/*"三",1*/
const unsigned char si[] U8X8_PROGMEM = {
0x00,0x00,0x00,0x00,0xFE,0x3F,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,
0x12,0x22,0x12,0x3C,0x0A,0x20,0x06,0x20,0x02,0x20,0xFE,0x3F,0x02,0x20,0x00,0x00
};/*"四"*/
const unsigned char wu[] U8X8_PROGMEM = {
0x00,0x00,0xFE,0x3F,0x40,0x00,0x40,0x00,0x40,0x00,0x40,0x00,0xFC,0x0F,0x20,0x08,
0x20,0x08,0x20,0x08,0x20,0x08,0x10,0x08,0x10,0x08,0x10,0x08,0xFF,0x7F,0x00,0x00
};/*"五"*/
const unsigned char liu[] U8X8_PROGMEM = {
0x40,0x00,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0xFF,0x7F,0x00,0x00,0x00,0x00,
0x20,0x02,0x20,0x04,0x10,0x08,0x10,0x10,0x08,0x10,0x04,0x20,0x02,0x20,0x00,0x00
};/*"六"*/
void setup() {
Serial.begin(115200);
Serial.println(); //println换行输出
Serial.println();
// 屏幕初始化
display.init();
display.clear();
display.display();
display.flipScreenVertically(); //屏幕翻转
display.setContrast(255); //屏幕亮度
// 用固定密码连接
wificonnect();
display.flipScreenVertically(); //屏幕反转
configTime(TZ_SEC, DST_SEC, "ntp.ntsc.ac.cn", "ntp1.aliyun.com"); //ntp获取时间
delay(200);
}
void drawDateTime() { //显示时间
int16_t x;
int16_t y;
now = time(nullptr);
struct tm* timeInfo;
timeInfo = localtime(&now);
char buff[16];
display.setTextAlignment(TEXT_ALIGN_CENTER);
display.setFont(ArialMT_Plain_16);
String date = WDAY_NAMES[timeInfo->tm_wday];
sprintf_P(buff, PSTR("%02d/%02d "), timeInfo->tm_mon + 1, timeInfo->tm_mday);
display.drawString(60 + x, 5 + y, String(buff));
display.setFont(ArialMT_Plain_24);
sprintf_P(buff, PSTR("%02d:%02d:%02d"), timeInfo->tm_hour, timeInfo->tm_min, timeInfo->tm_sec);
display.drawString(64 + x, 22 + y, String(buff));
display.setTextAlignment(TEXT_ALIGN_LEFT);
display.drawXbm(62, 5, 16,16, xing);
display.drawXbm(79, 5, 16,16, qi);
if (WDAY_NAMES[timeInfo->tm_wday]=="Mon")
display.drawXbm(96, 5, 16,16, yi);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Tue")
display.drawXbm(96, 5, 16,16, er);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Wed")
display.drawXbm(96, 5, 16,16, san);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Thu")
display.drawXbm(96, 5, 16,16, si);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Fri")
display.drawXbm(96, 5, 16,16, wu);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Sat")
display.drawXbm(96, 5, 16,16, liu);
else if (WDAY_NAMES[timeInfo->tm_wday]=="Sun")
display.drawXbm(96, 5, 16,16, ri);
}
void loop() {
display.clear();
drawDateTime();
display.display();
if (millis() - timeSinceLastWUpdate > (1000L * UPDATE_INTERVAL_SECS)) { //屏幕刷新
timeSinceLastWUpdate = millis();
}
}