南棱笑笑生

20230129在AIO-3568J开发板在原厂Android11下跑通6275s

0、使用Firefly的AIO-3568J的自带Andorid11，内核按照Firefly的模式编译，Android11按照原厂的模式编译。
可以打开WIFI上网，和使用BT蓝牙接受图片。
但是adb不能连接，插U盘不识别？TF可用。

Y:\RK356X_Android11.0\device\rockchip\rk356x\rk3568_firefly_aioj\BoardConfig.mk
Y:\RK356X_Android11.0\device\rockchip\rk356x\rk3568_r\BoardConfig.mk

Y:\RK356X_Android11.0\device\rockchip\rk356x\rk3568_firefly_aioj\rk3568_firefly_aioj.mk
Y:\RK356X_Android11.0\device\rockchip\rk356x\rk3568_r\rk3568_r.mk

初步比对，没有发现异常！

那就是在kernel中和Android11中修改的部分了。
Y:\rk3568_Android11.0_ToyBrick\RKDocs\android\wifi\Rockchip_Introduction_REALTEK_WIFI_Driver_Porting_CN&EN.pdf
【经过比对，Android11中关于WIFI的部分完全相同！^_】
Y:\rk3568_Android11.0_ToyBrick\RKDocs\android\wifi\Rockchip_Introduction_WIFI_Configuration_CN&EN.pdf

【目录】
Y:\RK356X_Android11.0\vendor\rockchip\common\wifi\wifi.mk
【目录】
Y:\RK356X_Android11.0\frameworks\opt\net\wifi\Android.bp
Y:\RK356X_Android11.0\kernel\net\rfkill\rfkill-wlan.c
【目录】
Y:\rk3568_Android11.0_ToyBrick\hardware\broadcom\
Y:\rk3568_Android11.0_ToyBrick\hardware\broadcom\libbt\Android.mk
【目录】
Y:\RK356X_Android11.0\external\wpa_supplicant_8\Android.mk

1、增加AP6275S的驱动：
目录
Z:\RK356X_Android11.0\kernel\drivers\net\wireless\rockchip_wlan\rkwifi\ap6275s\Kconfig
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ cd kernel/drivers/net/wireless/rockchip_wlan/rkwifi/
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel/drivers/net/wireless/rockchip_wlan/rkwifi$ ll
total 2040
drwxr-xr-x 5 rootroot rootroot 4096 1月 29 18:26 ./
drwxr-xr-x 17 rootroot rootroot 4096 7月 22 2021 ../
-rwx------ 1 rootroot rootroot 2054925 1月 27 09:40 ap6275s5.tgz*
drwxr-xr-x 3 rootroot rootroot 4096 7月 22 2021 bcmdhd/
drwxr-xr-x 3 rootroot rootroot 4096 7月 22 2021 bcmdhd_indep_power/
drwxr-xr-x 3 rootroot rootroot 4096 7月 22 2021 bcmdhd_wifi6/
-rw-r--r-- 1 rootroot rootroot 1611 1月 12 08:40 Kconfig
-rw-r--r-- 1 rootroot rootroot 297 1月 12 08:40 Makefile
-rw-r--r-- 1 rootroot rootroot 597 7月 22 2021 rk_wifi_config.c
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel/drivers/net/wireless/rockchip_wlan/rkwifi$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel/drivers/net/wireless/rockchip_wlan/rkwifi$ tar --use-compress-program=pigz -xvpf ap6275s5.tgz

Z:\RK356X_Android11.0\kernel\drivers\net\wireless\rockchip_wlan\rkwifi\Kconfig
# SPDX-License-Identifier: GPL-2.0
choice
prompt "Select driver version for ap6xxx chips"

config AP6XXX
   tristate "stable version (wifi5)"
   #depends on MMC && WLAN_80211
   select CFG80211
   select MAC80211
   help
   This module adds support for wireless adapters based on
   Broadcom ap6xxx chipset.

This driver uses the kernel's wireless extensions subsystem.

If you choose to build a module, it'll be called dhd. Say M if
unsure.

config AP6XXX_WIFI6
   tristate "support wifi6(80211ax)"
   #depends on MMC && WLAN_80211
   select CFG80211
   select MAC80211
   help
   This driver supports wifi6 for ap6xxx chipset.

This driver uses the kernel's wireless extensions subsystem.

If you choose to build a module, it'll be called dhd. Say M if
unsure.

config AP6275S
   tristate "support wifi6 ap6275s(80211ax)"
   #depends on MMC && WLAN_80211
   select CFG80211
   select MAC80211
   ---help---
   This driver supports wifi6 for ap6275s chipset.

This driver uses the kernel's wireless extensions subsystem.

If you choose to build a module, it'll be called dhd. Say M if
unsure.

config AP6XXX_INDEP_POWER
   tristate "support WiFi keepalive during host shutdown"
   select CFG80211
   select MAC80211

endchoice

config BCMDHD_FW_PATH
   depends on BCMDHD
   string "Firmware path"
   default "/vendor/etc/firmware/fw_bcmdhd.bin"
   help
   Path to the firmware file.

config BCMDHD_NVRAM_PATH
   depends on BCMDHD
   string "NVRAM path"
   default "/vendor/etc/firmware/nvram.txt"
   help
   Path to the calibration file.a

config BCMDHD_STATIC_IF
   bool "Enable wlan1 support"
   help
   default to add wlan1 interface

Z:\RK356X_Android11.0\kernel\drivers\net\wireless\rockchip_wlan\rkwifi\Makefile
# SPDX-License-Identifier: GPL-2.0
#rkwifi packed Makefile
# (gwl)

obj-$(CONFIG_AP6XXX) += bcmdhd/
obj-$(CONFIG_AP6XXX_WIFI6) += bcmdhd_wifi6/
obj-$(CONFIG_AP6275S) += ap6275s/
obj-$(CONFIG_AP6XXX_INDEP_POWER) += bcmdhd_indep_power/

.PHONY: clean

clean:
find . -name '*.o*' -exec rm -f {} \;

u-boot修改的部分：
Z:\RK356X_Android11.0\u-boot\arch\arm\mach-rockchip\board.c
Z:\RK356X_Android11.0\u-boot\arch\arm\mach-rockchip\boot_mode.c
Z:\RK356X_Android11.0\u-boot\arch\arm\mach-rockchip\boot_rkimg.c

2、增加Firefly的DTS/DTSI设备树文件：
Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk356x-firefly-demo.dtsi
在这个前面，眼神不好，还真找不到的！^_
Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk1808.dtsi

Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-aioj.dts
#include "rk3568-firefly-aioj.dtsi"

Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-aioj.dtsi
#include "rk3568-firefly-port.dtsi"

Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-port.dtsi
#include "rk3568.dtsi"
#include "rk3568-android.dtsi"

Z:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-core.dtsi
#include "rk3568-firefly-core.dtsi"
#include "rk356x-firefly-demo.dtsi"

不同版本的DTSI之间的差异（也有可能是Firefly夹带私活了！^_）
Y:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568.dtsi

Y:\RK356X_Android11.0\kernel\arch\arm64\boot\dts\rockchip\rk3568-android.dtsi

3、增加deconfig文件（将来生成.config配置kernel-4.19的编译）
Z:\RK356X_Android11.0\kernel\arch\arm64\configs\firefly_defconfig
有增加，不用管
Z:\RK356X_Android11.0\kernel\arch\arm64\configs\rockchip_defconfig

相同
Z:\RK356X_Android11.0\kernel\configs\rockchip\android-11.config
Z:\RK356X_Android11.0\kernel\configs\rockchip\rk3326.config

Z:\RK356X_Android11.0\kernel\configs\rockchip\firefly_wifi.config
搬家到这里来：【不然编译不过！】
Y:\rk3568_Android11.0_ToyBrick\kernel\arch\arm64\configs\firefly_wifi.config
# CONFIG_AP6XXX is not set
CONFIG_AP6275S=m

rootroot@rootroot-adol-ADOLBOOK-I421UAY-ADOL14UA:~/RK356X_Android11.0/kernel/kernel/configs$ ll
total 36
drwxrwxr-x 2 rootroot rootroot 4096 1月 12 08:40 ./
drwxrwxr-x 18 rootroot rootroot 4096 1月 12 08:40 ../
lrwxrwxrwx 1 rootroot rootroot 40 1月 12 08:40 android-11.config -> ../../configs/rockchip/android-11.config
lrwxrwxrwx 1 rootroot rootroot 43 1月 12 08:40 android-11-go.config -> ../../configs/rockchip/android-11-go.config
-rw-rw-r-- 1 rootroot rootroot 4162 1月 12 08:40 android-base.config
-rw-rw-r-- 1 rootroot rootroot 2895 1月 12 08:40 android-recommended.config
lrwxrwxrwx 1 rootroot rootroot 42 1月 12 08:40 firefly_wifi.config -> ../../configs/rockchip/firefly_wifi.config
-rw-rw-r-- 1 rootroot rootroot 649 1月 12 08:40 kvm_guest.config
lrwxrwxrwx 1 rootroot rootroot 50 1月 12 08:40 non_debuggable.config -> ../../configs/r/android-4.19/non_debuggable.config
-rw-rw-r-- 1 rootroot rootroot 306 1月 12 08:40 nopm.config
lrwxrwxrwx 1 rootroot rootroot 36 1月 12 08:40 rk3326.config -> ../../configs/rockchip/rk3326.config
lrwxrwxrwx 1 rootroot rootroot 36 1月 12 08:40 rk3399.config -> ../../configs/rockchip/rk3399.config
lrwxrwxrwx 1 rootroot rootroot 36 1月 12 08:40 rk356x.config -> ../../configs/rockchip/rk3326.config
lrwxrwxrwx 1 rootroot rootroot 41 1月 12 08:40 rk356x_eink.config -> ../../configs/rockchip/rk356x_eink.config
lrwxrwxrwx 1 rootroot rootroot 40 1月 12 08:40 rk356x_evb.config -> ../../configs/rockchip/rk356x_evb.config
-rw-rw-r-- 1 rootroot rootroot 347 1月 12 08:40 tiny.config
-rw-rw-r-- 1 rootroot rootroot 1138 1月 12 08:40 xen.config
rootroot@rootroot-adol-ADOLBOOK-I421UAY-ADOL14UA:~/RK356X_Android11.0/kernel/kernel/configs$

4、【找不到firefly_wifi.config的问题：挪个位置，kernel-4.19编译的时候找不到】
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel$ make ARCH=arm64 firefly_defconfig android-11.config rk356x.config firefly_wifi.config
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
LEX scripts/kconfig/zconf.lex.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
arch/arm64/configs/firefly_defconfig:975:warning: override: reassigning to symbol MFD_RK628
arch/arm64/configs/firefly_defconfig:976:warning: override: reassigning to symbol DRM_ROCKCHIP_RK628
#
# configuration written to .config
#
Using .config as base
Merging ./kernel/configs/android-11.config
Value of CONFIG_CIFS is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_CIFS=y
New value: # CONFIG_CIFS is not set

Value of CONFIG_CIFS_XATTR is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_CIFS_XATTR=y
New value: # CONFIG_CIFS_XATTR is not set

Value of CONFIG_CIFS_POSIX is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_CIFS_POSIX=y
New value: # CONFIG_CIFS_POSIX is not set

Value of CONFIG_CRYPTO_MD4 is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_CRYPTO_MD4=y
New value: # CONFIG_CRYPTO_MD4 is not set

Value of CONFIG_DEVMEM is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_DEVMEM=y
New value: # CONFIG_DEVMEM is not set

Value of CONFIG_SDCARD_FS is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_SDCARD_FS=y
New value: # CONFIG_SDCARD_FS is not set

Value of CONFIG_ANDROID_BINDERFS is redefined by fragment ./kernel/configs/android-11.config:
Previous value: # CONFIG_ANDROID_BINDERFS is not set
New value: CONFIG_ANDROID_BINDERFS=y

Value of CONFIG_IKHEADERS is redefined by fragment ./kernel/configs/android-11.config:
Previous value: CONFIG_IKHEADERS=m
New value: CONFIG_IKHEADERS=y

Value of CONFIG_UNICODE_NORMALIZATION_SELFTEST is redefined by fragment ./kernel/configs/android-11.config:
Previous value: # CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
New value: CONFIG_UNICODE_NORMALIZATION_SELFTEST=y

#
# merged configuration written to .config (needs make)
#
scripts/kconfig/conf --oldconfig Kconfig
#
# configuration written to .config
#
Using .config as base
Merging ./kernel/configs/rk356x.config
Value of CONFIG_MALI_MIDGARD is redefined by fragment ./kernel/configs/rk356x.config:
Previous value: CONFIG_MALI_MIDGARD=y
New value: # CONFIG_MALI_MIDGARD is not set

Value of CONFIG_MALI_EXPERT is redefined by fragment ./kernel/configs/rk356x.config:
Previous value: CONFIG_MALI_EXPERT=y
New value: # CONFIG_MALI_EXPERT is not set

Value of CONFIG_MALI_DEBUG is redefined by fragment ./kernel/configs/rk356x.config:
Previous value: CONFIG_MALI_DEBUG=y
New value: # CONFIG_MALI_DEBUG is not set

#
# merged configuration written to .config (needs make)
#
scripts/kconfig/conf --oldconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:109: *** No configuration exists for this target on this architecture. Stop.
make[1]: *** [Makefile:578: firefly_wifi.config] Error 2
make: *** [Makefile:286: __build_one_by_one] Error 2
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick/kernel$

5、【DTB编译不过的问题：Firefly夹带的私货，pca9555的驱动问题。】
make ARCH=arm64 firefly_defconfig android-11.config rk356x.config firefly_wifi.config
make ARCH=arm64 BOOT_IMG=../rockdev/Image-rk3568_firefly_aioj/boot.img rk3568-firefly-aioj.img -j8

CC net/core/ethtool.o
CC drivers/hid/hid-lg2ff.o
CC lib/flex_array.o
DTC arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj.dtb
Error: arch/arm64/boot/dts/rockchip/rk3568-firefly-port.dtsi:662.26-27 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:307: arch/arm64/boot/dts/rockchip/rk3568-firefly-aioj.dtb] Error 1
make: *** [arch/arm64/Makefile:145: rockchip/rk3568-firefly-aioj.dtb] Error 2
make: *** Waiting for unfinished jobs....
CC lib/iov_iter.o
CC drivers/hid/hid-lg3ff.o

Y:\rk3568_Android11.0_ToyBrick\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-port.dtsi
&spi1 {
   status = "disabled";
   max-freq = <48000000>;
   dev-port = <0>;
   pinctrl-0 = <&spi1m1_pins>;
   pinctrl-1 = <&spi1m1_pins_hs>;

   spi_wk2xxx: spi_wk2xxx@00{
       status = "disabled";
       compatible = "firefly,spi-wk2xxx";
       reg = <0x00>;
       spi-max-frequency = <10000000>;
       //power-gpio = <&pca9555 PCA_IO1_7 GPIO_ACTIVE_HIGH>;
       //reset-gpio = <&pca9555 PCA_IO1_1 GPIO_ACTIVE_HIGH>;
       irq-gpio = <&gpio0 RK_PA6 IRQ_TYPE_EDGE_FALLING>;
       cs-gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
       /* rk3399 driver support SPI_CPOL | SPI_CPHA | SPI_CS_HIGH */
       //spi-cpha; /* SPI mode: CPHA=1 */
       //spi-cpol; /* SPI mode: CPOL=1 */
       //spi-cs-high;
   };
};

Y:\rk3568_Android11.0_ToyBrick\kernel\arch\arm64\boot\dts\rockchip\rk3568-firefly-aioj.dtsi
   firefly_leds: leds {
       status = "okay";
       compatible = "gpio-leds";

       power_led: power {
           label = "firefly:blue:power";
           linux,default-trigger = "ir-power-click";
           default-state = "on";
           gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
           pinctrl-names = "default";
           pinctrl-0 = <&led_power>;
       };

       user_led: user {
           label = "firefly:yellow:user";
           linux,default-trigger = "ir-user-click";
           default-state = "off";
           //gpios = <&pca9555 PCA_IO1_2 GPIO_ACTIVE_LOW>;
       };

       fan_ctl: fan-ctl {
           label = "firefly:fan_ctl:user";
           linux,default-trigger = "ir-user-click";
           default-state = "on";
           //gpios = <&pca9555 PCA_IO1_0 GPIO_ACTIVE_HIGH>;
       };
};

tp_power: tp-power-regulator {
       compatible = "regulator-fixed";
       enable-active-high;
       gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
       pinctrl-names = "default";
       pinctrl-0 = <&tp_power_en>;
       regulator-name = "tp_power_en";
       regulator-always-on;
};
};

&pca9555 {
status = "okay";
};

&i2c1 {
status = "okay";

   XC6130b: XC6130b@23{
status = "okay";
compatible = "firefly,xc7022";
reg = <0x23>;
       clocks = <&cru CLK_CIF_OUT>;
       clock-names = "xvclk";
       pinctrl-names = "rockchip,camera_default";
       pinctrl-0 = <&refclk_pins>;

       //power-gpios = <&pca9555 PCA_IO0_3 GPIO_ACTIVE_HIGH>;
       //reset-gpios = <&pca9555 PCA_IO0_5 GPIO_ACTIVE_HIGH>;
       //pwdn-gpios = <&pca9555 PCA_IO0_4 GPIO_ACTIVE_HIGH>;

       firefly,clkout-enabled-index = <0>;
       rockchip,camera-module-index = <1>;
       rockchip,camera-module-facing = "front";
       rockchip,camera-module-name = "NC";
       rockchip,camera-module-lens-name = "NC";
port {
xc6130b_out: endpoint {
remote-endpoint = <&dphy2_in>;
data-lanes = <1 2>;
};
};
};

&i2c4 {
status = "okay";

   XC7022b: XC7022b@1b{
       status = "okay";
       compatible = "firefly,xc7022";
       reg = <0x1b>;
       clocks = <&cru CLK_CIF_OUT>;
       clock-names = "xvclk";
       //avdd-supply = <&vcc_mipi>;
       pinctrl-names = "rockchip,camera_default";
       pinctrl-0 = <&cif_clk>;

       //power-gpios = <&pca9555 PCA_IO0_0 GPIO_ACTIVE_HIGH>;
       //reset-gpios = <&pca9555 PCA_IO0_2 GPIO_ACTIVE_HIGH>;
       //pwdn-gpios = <&pca9555 PCA_IO0_1 GPIO_ACTIVE_HIGH>;

       firefly,clkout-enabled-index = <0>;
       rockchip,camera-module-index = <0>;
       rockchip,camera-module-facing = "back";
       rockchip,camera-module-name = "NC";
       rockchip,camera-module-lens-name = "NC";
       port {
           xc7022b_out: endpoint {
                   remote-endpoint = <&dphy1_in>;
                   data-lanes = <1 2>;
           };
       };
   };

os04a10: os04a10@36 {
//reset-gpios = <&pca9555 PCA_IO0_0 GPIO_ACTIVE_LOW>;
//pwdn-gpios = <&pca9555 PCA_IO0_1 GPIO_ACTIVE_HIGH>;
};
};

6、编译完成之后，刷机发现BT蓝牙可以接受图片，WIFI可以打开搜索，但是找不到开放的SSID。

console:/ #
console:/ # ifconfig
dummy0 Link encap:Ethernet HWaddr 9e:c4:27:fd:73:6d
inet6 addr: fe80::9cc4:27ff:fefd:736d/64 Scope: Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:350

eth1 Link encap:Ethernet HWaddr 16:8a:23:8f:df:7e Driver rk_gmac-dwmac
inet6 addr: fe80::148a:23ff:fe8f:df7e/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1772 TX bytes:796
Interrupt:51

eth0 Link encap:Ethernet HWaddr 1a:8a:23:8f:df:7e Driver rk_gmac-dwmac
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:0
Interrupt:41

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope: Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:0

console:/ #

console:/ #
console:/ # ifconfig
dummy0 Link encap:Ethernet HWaddr 9e:c4:27:fd:73:6d
inet6 addr: fe80::9cc4:27ff:fefd:736d/64 Scope: Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:420

eth1 Link encap:Ethernet HWaddr 16:8a:23:8f:df:7e Driver rk_gmac-dwmac
inet6 addr: fe80::148a:23ff:fe8f:df7e/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:52 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4024 TX bytes:866
Interrupt:51

wlan0 Link encap:Ethernet HWaddr 10:2c:6b:7f:b0:ec Driver bcmsdh_sdmmc
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:176

console:/ #

console:/ #
console:/ #
console:/ # [ 141.532437] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.connectivity.rc:46)
[ 141.558356] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.connectivity.rc:46)
[ 141.558813] [dhd] dhd_open: Enter wlan0
[ 141.558839] [dhd] dhd_open : no mutex held. set lock
[ 141.558854] [dhd]
[ 141.558854] Dongle Host Driver, version 100.10.545.12 (r826445-20200708-1)
[ 141.558874] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
[ 141.558941] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 141.558956] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 141.558967] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 141.558980] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[ 141.558992] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[ 141.863928] sdio_reset_comm():
[ 141.983927] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 142.000884] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 142.000921] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2)
[ 142.017211] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 142.057881] mmc3: queuing unknown CIS tuple 0x80 (2 bytes)
[ 142.064166] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 142.070395] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 142.081678] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
[ 142.391689] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 142.394481] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 142.394639] mmc_host mmc3: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 142.414674] dwmmc_rockchip fe000000.dwmmc: Successfully tuned phase to 266
[ 142.414779] [dhd] sdioh_start: set sd_f2_blocksize 256
[ 142.415273] [dhd]
[ 142.415273]
[ 142.415273] dhd_bus_devreset: == Power ON ==
[ 142.415411] [dhd] F1 signature read @0x18000000=0x1042aae8
[ 142.420548] [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[ 142.421428] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[ 142.421515] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 142.421579] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 142.422744] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/firmware/config.txt
[ 142.422765] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_ag.bin
[ 142.422772] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_ap6275s.txt
[ 142.422778] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_ag.blob
[ 142.422800] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
[ 142.423425] [dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_ag.bin (757448 bytes) open success
[ 142.478697] [dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_ap6275s.txt (8354 bytes) open success
[ 142.479207] [dhd] NVRAM version: AP6275S_NVRAM_V1.4_20201116
[ 142.479828] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 142.541410] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 142.541697] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=114 flags=0x4
[ 142.541946] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[ 142.541957] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 142.544154] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1
[ 142.545434] [dhd] dhd_os_open_image1: /vendor/etc/firmware/clm_bcm43752a2_ag.blob (28865 bytes) open success
[ 142.546836] [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
[ 142.569759] [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
[ 142.571748] [dhd] Firmware up: op_mode=0x0005, MAC=10:2c:6b:7f:b0:ec
[ 142.578394] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: 0
[ 142.588814] [dhd] Driver: 100.10.545.12 (r826445-20200708-1)
[ 142.588814] Firmware: wl0: Oct 23 2020 15:06:26 version 18.35.387.23.14 (70c9ec1@shgit) (wlan=r880297) FWID 01-217b144d
[ 142.588814] CLM: 9.9.5_SS (2019-12-04 01:26:12)
[ 142.589533] [dhd] dhd_txglom_enable: enable 1
[ 142.589545] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
[ 142.589558] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
[ 142.589568] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
[ 142.589580] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
[ 142.589595] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
[ 142.591794] [dhd] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
[ 142.593707] [dhd] dhd_pno_init: Support Android Location Service
[ 142.618107] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[ 142.618130] [dhd] dhd_rtt_init : FTM is not supported
[ 142.618690] [dhd] dhd_rtt_ftm_config : failed to set config
[ 142.621577] [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
[ 142.622710] [dhd] failed to start ecounters
[ 142.622772] [dhd] dhd_ecounter_configure Ecounters start failed
[ 142.629531] [dhd] [INIT] logset:8 is preserve/chatty
[ 142.630951] [dhd] [INIT] logset:10 is preserve/chatty
[ 142.642345] [dhd] dhd_conf_set_country : set country CN, revision 0
[ 142.647055] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
[ 142.647071] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 142.647424] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 142.647703] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 142.657490] [dhd-wlan0] wl_android_wifi_on : Success
[ 142.711563] [dhd] dhd_open : the lock is released.
[ 142.711595] [dhd] dhd_open: Exit wlan0 ret=0
[ 142.711602] [dhd] [wlan0] tx queue started
[ 142.718021] init: Unable to set property 'vendor.wlan.driver.version' from uid:1010 gid:1010 pid:285: SELinux permission check failed
[ 142.718039] type=1107 audit(1675002314.330:162): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=vendor.wlan.driver.version pid=285 uid=1010 gid=1010 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=0'
[ 142.773498] init: starting service 'wpa_supplicant'...
[ 142.774550] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
[ 142.777894] init: Control message: Processed ctl.interface_start for '[email protected]::ISupplicant/default' from pid: 154 (/system/bin/hwservicemanager)
[ 142.865969] capability: warning: `wpa_supplicant' uses 32-bit capabilities (legacy support in use)
[ 143.062711] [dhd] P2P interface registered
[ 143.062771] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: 0000000011dc22af, wdev->net: (null)
[ 143.159035] init: processing action (vendor.wifi.direct.interface=p2p-dev-wlan0) from (/vendor/etc/init/hw/init.connectivity.rc:53)
[ 143.239392] [dhd] dhd_dbg_attach_pkt_monitor, 1501
[ 143.263684] [dhd] net_os_enable_packet_filter: val = 0
[ 143.264152] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 2
[ 143.265224] [dhd] net_os_enable_packet_filter: val = 1
[ 143.265820] [dhd] net_os_enable_packet_filter: val = 0
[ 143.266114] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 3
[ 143.266977] [dhd] net_os_enable_packet_filter: val = 1
[ 143.267373] [dhd] dhd_set_suspend: Remove extra suspend setting
[ 143.267952] [dhd] dhd_enable_packet_filter: enter, value = 0
[ 143.312882] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
[ 143.313304] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 143.313326] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 143.313343] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 143.325134] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
[ 143.325625] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 143.325655] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 143.325668] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 143.360441] type=1400 audit(1675002314.970:163): avc: denied { read } for comm="Binder:177_1" name="wakeup2" dev="sysfs" ino=16288 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 143.362358] type=1400 audit(1675002314.973:164): avc: denied { read } for comm="Binder:177_1" name="wakeup9" dev="sysfs" ino=25215 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 143.362506] type=1400 audit(1675002314.973:165): avc: denied { read } for comm="Binder:177_1" name="wakeup14" dev="sysfs" ino=28588 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 143.363295] type=1400 audit(1675002314.973:166): avc: denied { read } for comm="Binder:177_1" name="wakeup12" dev="sysfs" ino=26116 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 143.363880] audit: audit_lost=57 audit_rate_limit=5 audit_backlog_limit=64
[ 143.363929] audit: rate limit exceeded
[ 145.345339] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
[ 145.345895] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 145.345910] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 145.345924] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 147.367778] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
[ 147.369109] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 147.369137] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 147.369151] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 149.399239] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 4, bssidx: 0
[ 149.402014] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 149.402068] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 149.402096] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)

console:/ #
console:/ #
console:/ #
console:/ #
console:/ #
console:/ # [ 151.441459] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 5, bssidx: 0
[ 151.444666] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 151.444749] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 151.444788] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)

console:/ #
console:/ # [ 153.359862] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 6, bssidx: 0
[ 153.363356] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 153.363440] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 153.363480] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 153.472725] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 7, bssidx: 0
[ 153.475423] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 153.475466] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 153.475486] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 157.447792] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 8, bssidx: 0
[ 157.449269] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 157.449300] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 157.449313] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 157.559964] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 9, bssidx: 0
[ 157.564896] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 157.564942] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 157.564955] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 161.202943] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 10, bssidx: 0
[ 161.203487] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 161.203523] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 161.203537] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 163.314801] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 11, bssidx: 0
[ 163.315338] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 163.315360] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 163.315379] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 163.704926] init: Unable to set property 'sys.gmali.version' from uid:10115 gid:10115 pid:2063: SELinux permission check failed
[ 163.704964] type=1107 audit(1675002335.316:179): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=sys.gmali.version pid=2063 uid=10115 gid=10115 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=0'
[ 165.335878] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 12, bssidx: 0
[ 165.337426] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 165.337460] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 165.337475] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 166.274022] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 13, bssidx: 0
[ 166.275430] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 166.275460] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 166.275473] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 166.401185] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 14, bssidx: 0
[ 166.401717] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 166.401748] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 166.401763] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 167.359109] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 15, bssidx: 0
[ 167.360743] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 167.360782] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 167.360797] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 169.381771] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 16, bssidx: 0
[ 169.382300] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 169.382322] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 169.382346] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 171.403258] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 17, bssidx: 0
[ 171.404504] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 171.404538] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 171.404552] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 173.424982] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 18, bssidx: 0
[ 173.426503] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 173.426538] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 173.426553] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 176.313178] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 19, bssidx: 0
[ 176.314627] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 176.314653] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 176.314666] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 176.438757] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 20, bssidx: 0
[ 176.440249] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 176.440282] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 176.440298] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)

console:/ #
console:/ #
console:/ #
console:/ # ifconfig
dummy0 Link encap:Ethernet HWaddr 9e:c4:27:fd:73:6d
inet6 addr: fe80::9cc4:27ff:fefd:736d/64 Scope: Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:420

eth1 Link encap:Ethernet HWaddr 16:8a:23:8f:df:7e Driver rk_gmac-dwmac
inet6 addr: fe80::148a:23ff:fe8f:df7e/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:52 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4024 TX bytes:866
Interrupt:51

console:/ #
console:/ # [ 186.368984] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 21, bssidx: 0
[ 186.370446] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 186.370520] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 186.370542] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 186.444188] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 22, bssidx: 0
[ 186.445600] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 186.445622] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 186.445633] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 189.459904] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 196.417487] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 23, bssidx: 0
[ 196.419041] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 196.419082] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 196.419099] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 196.494796] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 24, bssidx: 0
[ 196.496142] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 196.496158] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 196.496168] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 203.320936] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 25, bssidx: 0
[ 203.322418] [dhd] CFG80211-ERROR) wl_run_escan : Escan set error (-37)
[ 203.322450] [dhd] CFG80211-ERROR) wl_run_escan : scan error (-37)
[ 203.322466] [dhd] CFG80211-ERROR) wl_cfg80211_scan : scan error (-11)
[ 204.830485] [dhd] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered
[ 204.888595] [dhd] [wlan0] tx queue stopped
[ 204.888627] [dhd] dhd_stop: Enter wlan0
[ 204.888633] [dhd] dhd_stop: ######### dhd_stop called for ifidx=0 #########
[ 204.888639] [dhd] dhd_stop: making dhdpub up FALSE
[ 204.899991] [dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[ 204.900817] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0
[ 204.900842] [dhd-wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1
[ 204.901874] [dhd] dhd_dbg_detach_pkt_monitor, 2099
[ 204.901894] [dhd] __dhd_dbg_free_tx_pkts, 1412
[ 204.901908] [dhd] __dhd_dbg_free_rx_pkts, 1431
[ 204.901921] [dhd] dhd_bus_devreset: == Power OFF ==
[ 204.902054] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[ 204.902137] [dhd] bcmsdh_oob_intr_unregister: Enter
[ 204.902170] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[ 204.902178] [dhd] dhd_txglom_enable: enable 0
[ 204.902183] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 204.902189] [dhd] dhd_bus_devreset: WLAN OFF DONE
[ 204.902239] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[ 204.902257] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[ 204.902268] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 204.902288] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[ 204.902298] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]
[ 204.902310] [dhd-wlan0] wl_android_wifi_off : out
[ 204.933993] [dhd] dhd_stop: Exit wlan0
[ 204.944292] init: Service 'wpa_supplicant' (pid 2050) exited with status 0 oneshot service took 62.167999 seconds in background
[ 204.944347] init: Sending signal 9 to service 'wpa_supplicant' (pid 2050) process group...
[ 204.944633] libprocessgroup: Successfully killed process cgroup uid 0 pid 2050 in 0ms
[ 204.970658] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970694] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970704] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970712] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970721] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970729] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970739] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970757] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970772] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970787] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970801] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970815] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 204.970829] [dhd] dhd_dbg_set_event_log_tag set log tag iovar failed -19
[ 205.074753] type=1400 audit(1675002376.686:180): avc: denied { read } for comm="Binder:177_1" name="wakeup2" dev="sysfs" ino=16288 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 205.076453] type=1400 audit(1675002376.686:181): avc: denied { read } for comm="Binder:177_1" name="wakeup9" dev="sysfs" ino=25215 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 205.076719] type=1400 audit(1675002376.686:182): avc: denied { read } for comm="Binder:177_1" name="wakeup14" dev="sysfs" ino=28588 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 205.077485] type=1400 audit(1675002376.690:183): avc: denied { read } for comm="Binder:177_1" name="wakeup12" dev="sysfs" ino=26116 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 205.079860] type=1400 audit(1675002376.690:184): avc: denied { read } for comm="Binder:177_1" name="wakeup5" dev="sysfs" ino=23932 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 205.080051] type=1400 audit(1675002376.690:185): avc: denied { read } for comm="Binder:177_1" name="wakeup10" dev="sysfs" ino=25976 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 205.081687] type=1400 audit(1675002376.693:186): avc: denied { read } for comm="Binder:177_1" name="wakeup13" dev="sysfs" ino=28214 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 205.082776] type=1400 audit(1675002376.693:187): avc: denied { read } for comm="Binder:177_1" name="wakeup11" dev="sysfs" ino=26032 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0

console:/ #
console:/ #
console:/ #

现在考虑的两个方向！通过adb来修改。
（一）、WIFI的驱动模块的问题：bcmdhd.ko【最后确认不是这里的问题】
1.2 Android 注意事项 Android notices
1.编译 kernel 时会自动编译 wifi ko 文件，编译 Android 的时候会自动将 wifi ko 文件拷贝到vendor.img 中，存放在/vendor/lib/modules/目录下。

It will automatically compile wifi ko file when compiling kernel. When compiling Android, it will automatically copy wifi ko file to vendor.img and save in the directory of /vendor/lib/modules/.vendor/rockchip/common/wifi/wifi.mk

console:/ #
console:/ # cd /vendor/li
lib/ lib64/
console:/ # cd /vendor/lib/modules/
console:/vendor/lib/modules #
console:/vendor/lib/modules # ls -l
total 19152
-rw-r--r-- 1 root root 3910536 2023-01-27 02:29 8723cs.ko
-rw-r--r-- 1 root root 4979920 2023-01-27 02:29 8821cs.ko
-rw-r--r-- 1 root root 6637152 2023-01-27 02:29 8822bs.ko
-rw-r--r-- 1 root root 3155256 2023-01-27 02:29 bcmdhd.ko
-rw-r--r-- 1 root root 1316880 2023-01-27 02:29 mali_kbase.ko
-rw-r--r-- 1 root root 861 2023-01-27 02:49 modules.alias
-rw-r--r-- 1 root root 225 2023-01-27 02:49 modules.dep
-rw-r--r-- 1 root root 78 2023-01-27 02:49 modules.load
-rw-r--r-- 1 root root 55 2023-01-27 02:49 modules.softdep
-rw-r--r-- 1 root root 56920 2023-01-27 02:29 rknpu-clang.ko
-rw-r--r-- 1 root root 58608 2023-01-27 02:29 rknpu.ko
console:/vendor/lib/modules #
console:/vendor/lib/modules # md5sum bcmdhd.ko
cc7502fed8a13344ec589b47eadeca25 bcmdhd.ko
console:/vendor/lib/modules #

（二）、BT固件相同。但是WIFI固件更大，貌似更新！

【根据全志平台的经验，WIFI的固件越大越新！Nvidia显卡驱动一般也是这样的！所以当时比对到之类，编译之前我就没有改！后来感觉驱动和这里的固件是配对的！^_】
Y:\RK356X_Android11.0\vendor\rockchip\common\bluetooth\lib\firmware\BCM4362A2.hcd

rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ find . -name BCM4362A2.hcd
./vendor/rockchip/common/bluetooth/lib/firmware/BCM4362A2.hcd
./out/target/product/rk3568_r/vendor/etc/firmware/BCM4362A2.hcd
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ find . -name fw_bcm43752a2_ag.bin
./vendor/rockchip/common/wifi/firmware/fw_bcm43752a2_ag.bin
./out/target/product/rk3568_r/recovery/root/vendor/etc/firmware/fw_bcm43752a2_ag.bin
./out/target/product/rk3568_r/vendor/etc/firmware/fw_bcm43752a2_ag.bin
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ find . -name bcmdhd.ko
./kernel/drivers/net/wireless/rockchip_wlan/rkwifi/ap6275s/bcmdhd.ko
./out/target/product/rk3568_r/obj/PACKAGING/depmod_vendor_stripped_intermediates/bcmdhd.ko
./out/target/product/rk3568_r/obj/PACKAGING/depmod_VENDOR_intermediates/lib/modules/0.0/vendor/lib/modules/bcmdhd.ko
./out/target/product/rk3568_r/recovery/root/pcba/lib/modules/rkwifi/ap6275s/bcmdhd.ko
./out/target/product/rk3568_r/vendor/lib/modules/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ md5sum ./kernel/drivers/net/wireless/rockchip_wlan/rkwifi/ap6275s/bcmdhd.ko
91ed6af8adaf0c5444ec012a9efa2685 ./kernel/drivers/net/wireless/rockchip_wlan/rkwifi/ap6275s/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ md5sum ./out/target/product/rk3568_r/obj/PACKAGING/depmod_vendor_stripped_intermediates/bcmdhd.ko
cc7502fed8a13344ec589b47eadeca25 ./out/target/product/rk3568_r/obj/PACKAGING/depmod_vendor_stripped_intermediates/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ md5sum ./out/target/product/rk3568_r/obj/PACKAGING/depmod_VENDOR_intermediates/lib/modules/0.0/vendor/lib/modules/bcmdhd.ko
91ed6af8adaf0c5444ec012a9efa2685 ./out/target/product/rk3568_r/obj/PACKAGING/depmod_VENDOR_intermediates/lib/modules/0.0/vendor/lib/modules/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ md5sum ./out/target/product/rk3568_r/recovery/root/pcba/lib/modules/rkwifi/ap6275s/bcmdhd.ko
91ed6af8adaf0c5444ec012a9efa2685 ./out/target/product/rk3568_r/recovery/root/pcba/lib/modules/rkwifi/ap6275s/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$ md5sum ./out/target/product/rk3568_r/vendor/lib/modules/bcmdhd.ko
cc7502fed8a13344ec589b47eadeca25 ./out/target/product/rk3568_r/vendor/lib/modules/bcmdhd.ko
rootroot@rootroot-HP-ZHAN-66-Pro-A-14-G3:~/rk3568_Android11.0_ToyBrick$

1|console:/ #
1|console:/ # cd /vendor/etc/firmware/
console:/vendor/etc/firmware #
console:/vendor/etc/firmware # ls [10205.198456] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
-l
total 30648
-rw-r--r-- 1 root root 29773 2023-01-27 11:42 4343A0.hcd
-rw-r--r-- 1 root root 7335 2023-01-27 11:42 AP6275P_NVRAM_V1.1_20200702.txt
-rw-r--r-- 1 root root 26621 2023-01-27 11:42 BCM20710A1.hcd
-rw-r--r-- 1 root root 54593 2023-01-27 11:42 BCM4330B1.hcd
-rw-r--r-- 1 root root 41657 2023-01-27 11:42 BCM4343A0.hcd
-rw-r--r-- 1 root root 36657 2023-01-27 11:42 BCM4343A1.hcd
-rw-r--r-- 1 root root 42667 2023-01-27 11:42 BCM4343B0.hcd
-rw-r--r-- 1 root root 65639 2023-01-27 11:42 BCM4345C0.hcd
-rw-r--r-- 1 root root 45667 2023-01-27 11:42 BCM4345C5.hcd
-rw-r--r-- 1 root root 65058 2023-01-27 11:42 BCM4354A2.hcd
-rw-r--r-- 1 root root 65058 2023-01-27 11:42 BCM4356A2.hcd
-rw-r--r-- 1 root root 67687 2023-01-27 11:42 BCM4359C0.hcd
-rw-r--r-- 1 root root 75203 2023-01-27 11:42 BCM4362A2.hcd
-rw-r--r-- 1 root root 6276 2023-01-27 11:42 BT_Firmware.mk
-rw-r--r-- 1 root root 1806 2023-01-27 11:42 RT2870AP.dat
-rw-r--r-- 1 root root 595 2023-01-27 11:42 RT2870APCard.dat
-rw-r--r-- 1 root root 1222 2023-01-27 11:42 RT2870STA.dat
-rw-r--r-- 1 root root 613 2023-01-27 11:42 RT2870STACard.dat
-rw-r--r-- 1 root root 37955 2023-01-27 11:42 awnb108.hcd
-rw-r--r-- 1 root root 26621 2023-01-27 11:42 bcm20710a1.hcd
-rw-r--r-- 1 root root 26634 2023-01-27 11:42 bcm20710a1_24M.hcd
-rw-r--r-- 1 root root 26621 2023-01-27 11:42 bcm20710a1_26M.hcd
-rw-r--r-- 1 root root 32802 2023-01-27 11:42 bcm2076b1.hcd
-rw-r--r-- 1 root root 54593 2023-01-27 11:42 bcm40183b2.hcd
-rw-r--r-- 1 root root 14344 2023-01-27 11:42 bcm43241b4.hcd
-rw-r--r-- 1 root root 16608 2023-01-27 11:42 bcm4329.hcd
-rw-r--r-- 1 root root 41413 2023-01-27 11:42 bcm43341b0.hcd
-rw-r--r-- 1 root root 57291 2023-01-27 11:42 bcm4339a0.hcd
-rw-r--r-- 1 root root 40568 2023-01-27 11:42 bcm43438a0.hcd
-rw-r--r-- 1 root root 36774 2023-01-27 11:42 bcm43438a1.hcd
-rw-r--r-- 1 root root 66879 2023-01-27 11:42 bcm4354a1.hcd
-rw-r--r-- 1 root root 28865 2023-01-27 11:42 clm_bcm43752a2_ag.blob
-rw-r--r-- 1 root root 29113 2023-01-27 11:42 clm_bcm43752a2_pcie_ag.blob
-rw-r--r-- 1 root root 201472 2023-01-27 11:42 fw_RK901.bin
-rw-r--r-- 1 root root 201472 2023-01-27 11:42 fw_RK901a0.bin
-rw-r--r-- 1 root root 201472 2023-01-27 11:42 fw_RK901a0_apsta.bin
-rw-r--r-- 1 root root 212536 2023-01-27 11:42 fw_RK901a2.bin
-rw-r--r-- 1 root root 204070 2023-01-27 11:42 fw_RK901a2_apsta.bin
-rw-r--r-- 1 root root 212850 2023-01-27 11:42 fw_RK901a2_p2p.bin
-rw-r--r-- 1 root root 239947 2023-01-27 11:42 fw_RK903.bin
-rw-r--r-- 1 root root 246143 2023-01-27 11:42 fw_RK903_ag.bin
-rw-r--r-- 1 root root 246143 2023-01-27 11:42 fw_RK903_ag_apsta.bin
-rw-r--r-- 1 root root 246143 2023-01-27 11:42 fw_RK903_ag_p2p.bin
-rw-r--r-- 1 root root 239947 2023-01-27 11:42 fw_RK903_p2p.bin
-rw-r--r-- 1 root root 229802 2023-01-27 11:42 fw_RK903b2.bin
-rw-r--r-- 1 root root 210920 2023-01-27 11:42 fw_RK903b2_apsta.bin
-rw-r--r-- 1 root root 226455 2023-01-27 11:42 fw_RK903b2_p2p.bin
-rw-r--r-- 1 root root 206231 2023-01-27 11:42 fw_awnb108.bin
-rw-r--r-- 1 root root 191709 2023-01-27 11:42 fw_awnb108_ap.bin
-rw-r--r-- 1 root root 213647 2023-01-27 11:42 fw_bcm40181a2.bin
-rw-r--r-- 1 root root 209599 2023-01-27 11:42 fw_bcm40181a2_apsta.bin
-rw-r--r-- 1 root root 226606 2023-01-27 11:42 fw_bcm40183b2.bin
-rw-r--r-- 1 root root 239507 2023-01-27 11:42 fw_bcm40183b2_ag.bin
-rw-r--r-- 1 root root 226405 2023-01-27 11:42 fw_bcm40183b2_ag_apsta.bin
-rw-r--r-- 1 root root 239507 2023-01-27 11:42 fw_bcm40183b2_ag_p2p.bin
-rw-r--r-- 1 root root 210920 2023-01-27 11:42 fw_bcm40183b2_apsta.bin
-rw-r--r-- 1 root root 239507 2023-01-27 11:42 fw_bcm40183b2_p2p.bin
-rw-r--r-- 1 root root 392320 2023-01-27 11:42 fw_bcm43241b4_ag.bin
-rw-r--r-- 1 root root 400662 2023-01-27 11:42 fw_bcm43241b4_ag_apsta.bin
-rw-r--r-- 1 root root 400662 2023-01-27 11:42 fw_bcm43241b4_ag_p2p.bin
-rw-r--r-- 1 root root 218460 2023-01-27 11:42 fw_bcm4330.bin
-rw-r--r-- 1 root root 237848 2023-01-27 11:42 fw_bcm4330_apsta.bin
-rw-r--r-- 1 root root 399488 2023-01-27 11:42 fw_bcm43341b0_ag.bin
-rw-r--r-- 1 root root 399488 2023-01-27 11:42 fw_bcm43341b0_ag_apsta.bin
-rw-r--r-- 1 root root 366498 2023-01-27 11:42 fw_bcm43341b0_ag_p2p.bin
-rw-r--r-- 1 root root 457249 2023-01-27 11:42 fw_bcm4334b1_ag.bin
-rw-r--r-- 1 root root 413342 2023-01-27 11:42 fw_bcm4334b1_ag_apsta.bin
-rw-r--r-- 1 root root 457249 2023-01-27 11:42 fw_bcm4334b1_ag_p2p.bin
-rw-r--r-- 1 root root 569309 2023-01-27 11:42 fw_bcm4339a0_ag.bin
-rw-r--r-- 1 root root 569309 2023-01-27 11:42 fw_bcm4339a0_ag_apsta.bin
-rw-r--r-- 1 root root 569309 2023-01-27 11:42 fw_bcm4339a0_ag_p2p.bin
-rw-r--r-- 1 root root 426539 2023-01-27 11:42 fw_bcm43436b0.bin
-rw-r--r-- 1 root root 426539 2023-01-27 11:42 fw_bcm43436b0_apsta.bin
-rw-r--r-- 1 root root 425265 2023-01-27 11:42 fw_bcm43436b0_p2p.bin
-rw-r--r-- 1 root root 457598 2023-01-27 11:42 fw_bcm43438a0.bin
-rw-r--r-- 1 root root 457598 2023-01-27 11:42 fw_bcm43438a0_apsta.bin
-rw-r--r-- 1 root root 455252 2023-01-27 11:42 fw_bcm43438a0_p2p.bin
-rw-r--r-- 1 root root 436966 2023-01-27 11:42 fw_bcm43438a1.bin
-rw-r--r-- 1 root root 436966 2023-01-27 11:42 fw_bcm43438a1_apsta.bin
-rw-r--r-- 1 root root 432056 2023-01-27 11:42 fw_bcm43438a1_p2p.bin
-rw-r--r-- 1 root root 624166 2023-01-27 11:42 fw_bcm43455c0_ag.bin
-rw-r--r-- 1 root root 624166 2023-01-27 11:42 fw_bcm43455c0_ag_apsta.bin
-rw-r--r-- 1 root root 650271 2023-01-27 11:42 fw_bcm43455c0_ag_p2p.bin
-rw-r--r-- 1 root root 603086 2023-01-27 11:42 fw_bcm43456c5_ag.bin
-rw-r--r-- 1 root root 603086 2023-01-27 11:42 fw_bcm43456c5_ag_apsta.bin
-rw-r--r-- 1 root root 655622 2023-01-27 11:42 fw_bcm4354a1_ag.bin
-rw-r--r-- 1 root root 655622 2023-01-27 11:42 fw_bcm4354a1_ag_apsta.bin
-rw-r--r-- 1 root root 655622 2023-01-27 11:42 fw_bcm4354a1_ag_p2p.bin
-rw-r--r-- 1 root root 578797 2023-01-27 11:42 fw_bcm4356a2_ag.bin
-rw-r--r-- 1 root root 578797 2023-01-27 11:42 fw_bcm4356a2_ag_apsta.bin
-rw-r--r-- 1 root root 593126 2023-01-27 11:42 fw_bcm4356a2_ag_p2p.bin
-rw-r--r-- 1 root root 655119 2023-01-27 11:42 fw_bcm4359c0_ag.bin
-rw-r--r-- 1 root root 655119 2023-01-27 11:42 fw_bcm4359c0_ag_apsta.bin
-rw-r--r-- 1 root root 641775 2023-01-27 11:42 fw_bcm4359c0_ag_p2p.bin
-rw-r--r-- 1 root root 743607 2023-01-27 11:42 fw_bcm43752a2_ag.bin
-rw-r--r-- 1 root root 743607 2023-01-27 11:42 fw_bcm43752a2_ag_apsta.bin
-rw-r--r-- 1 root root 841944 2023-01-27 11:42 fw_bcm43752a2_pcie_ag.bin
-rw-r--r-- 1 root root 841944 2023-01-27 11:42 fw_bcm43752a2_pcie_ag_apsta.bin
-rw-r--r-- 1 root root 412471 2023-01-27 11:42 fw_cyw43438.bin
-rw-r--r-- 1 root root 630045 2023-01-27 11:42 fw_cyw43455.bin
-rw-r--r-- 1 root root 1368 2023-01-27 11:42 fw_info.txt
-rw-r--r-- 1 root root 37949 2023-01-27 11:42 nh660.hcd
-rw-r--r-- 1 root root 741 2023-01-27 11:42 nvram_4330.txt
-rw-r--r-- 1 root root 753 2023-01-27 11:42 nvram_4330_oob.txt
-rw-r--r-- 1 root root 1235 2023-01-27 11:42 nvram_AP6181.txt
-rw-r--r-- 1 root root 1178 2023-01-27 11:42 nvram_AP6210.txt
-rw-r--r-- 1 root root 1178 2023-01-27 11:42 nvram_AP6210_24M.txt
-rw-r--r-- 1 root root 2613 2023-01-27 11:42 nvram_AP6234.txt
-rw-r--r-- 1 root root 7335 2023-01-27 11:42 nvram_AP6275P.txt
-rw-r--r-- 1 root root 1522 2023-01-27 11:42 nvram_AP6330.txt
-rw-r--r-- 1 root root 2366 2023-01-27 11:42 nvram_AP6335.txt
-rw-r--r-- 1 root root 2628 2023-01-27 11:42 nvram_AP6441.txt
-rw-r--r-- 1 root root 712 2023-01-27 11:42 nvram_AP6476.txt
-rw-r--r-- 1 root root 1035 2023-01-27 11:42 nvram_AP6493.txt
-rw-r--r-- 1 root root 1187 2023-01-27 11:42 nvram_B23.txt
-rw-r--r-- 1 root root 1536 2023-01-27 11:42 nvram_GB86302I.txt
-rw-r--r-- 1 root root 698 2023-01-27 11:42 nvram_RK901.txt
-rw-r--r-- 1 root root 1647 2023-01-27 11:42 nvram_RK903.cal
-rw-r--r-- 1 root root 1003 2023-01-27 11:42 nvram_RK903.txt
-rw-r--r-- 1 root root 1663 2023-01-27 11:42 nvram_RK903_26M.cal
-rw-r--r-- 1 root root 698 2023-01-27 11:42 nvram_WL211.txt
-rw-r--r-- 1 root root 993 2023-01-27 11:42 nvram_ap6212.txt
-rw-r--r-- 1 root root 1017 2023-01-27 11:42 nvram_ap6212a.txt
-rw-r--r-- 1 root root 1001 2023-01-27 11:42 nvram_ap6214.txt
-rw-r--r-- 1 root root 1003 2023-01-27 11:42 nvram_ap6214a.txt
-rw-r--r-- 1 root root 1226 2023-01-27 11:42 nvram_ap6216.txt
-rw-r--r-- 1 root root 2659 2023-01-27 11:42 nvram_ap6233f.txt
-rw-r--r-- 1 root root 1226 2023-01-27 11:42 nvram_ap6236.txt
-rw-r--r-- 1 root root 2135 2023-01-27 11:42 nvram_ap6255.txt
-rw-r--r-- 1 root root 2440 2023-01-27 11:42 nvram_ap6256.txt
-rw-r--r-- 1 root root 8709 2023-01-27 11:42 nvram_ap6275s.txt
-rw-r--r-- 1 root root 2669 2023-01-27 11:42 nvram_ap62x2.txt
-rw-r--r-- 1 root root 3341 2023-01-27 11:42 nvram_ap6354.txt
-rw-r--r-- 1 root root 2840 2023-01-27 11:42 nvram_ap6356.txt
-rw-r--r-- 1 root root 2856 2023-01-27 11:42 nvram_ap6356s.txt
-rw-r--r-- 1 root root 6096 2023-01-27 11:42 nvram_ap6398s.txt
-rw-r--r-- 1 root root 6096 2023-01-27 11:42 nvram_ap6398sa.txt
-rw-r--r-- 1 root root 1002 2023-01-27 11:42 nvram_ap6452.txt
-rw-r--r-- 1 root root 861 2023-01-27 11:42 nvram_awnb108.txt
-rw-r--r-- 1 root root 2070 2023-01-27 11:42 nvram_azw256.txt
-rw-r--r-- 1 root root 1017 2023-01-27 11:42 nvram_azw372.txt
-rw-r--r-- 1 root root 4058 2023-01-27 11:42 otp.bin.z77
-rw-r--r-- 1 root root 1521 2023-01-27 11:42 readme.txt
-rw-r--r-- 1 root root 36156 2023-01-27 11:42 rk903.hcd
-rw-r--r-- 1 root root 54593 2023-01-27 11:42 rk903_26M.hcd
-rw-r--r-- 1 root root 64 2023-01-27 11:42 rtl8703as_config
-rw-r--r-- 1 root root 19996 2023-01-27 11:42 rtl8703as_fw
-rw-r--r-- 1 root root 59 2023-01-27 11:42 rtl8703bs_config
-rw-r--r-- 1 root root 29460 2023-01-27 11:42 rtl8703bs_fw
-rw-r--r-- 1 root root 35 2023-01-27 11:42 rtl8703cs_config
-rw-r--r-- 1 root root 44900 2023-01-27 11:42 rtl8703cs_fw
-rw-r--r-- 1 root root 24 2023-01-27 11:42 rtl8723a_config
-rw-r--r-- 1 root root 33 2023-01-27 11:42 rtl8723a_config_addr
-rw-r--r-- 1 root root 24452 2023-01-27 11:42 rtl8723a_fw
-rw-r--r-- 1 root root 40 2023-01-27 11:42 rtl8723as_config
-rw-r--r-- 1 root root 24372 2023-01-27 11:42 rtl8723as_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8723b_config
-rw-r--r-- 1 root root 14 2023-01-27 11:42 rtl8723b_config_2Ant_S0
-rw-r--r-- 1 root root 45560 2023-01-27 11:42 rtl8723b_fw
-rw-r--r-- 1 root root 56 2023-01-27 11:42 rtl8723bs_VQ0_config
-rw-r--r-- 1 root root 46568 2023-01-27 11:42 rtl8723bs_VQ0_fw
-rw-r--r-- 1 root root 48 2023-01-27 11:42 rtl8723bs_config
-rw-r--r-- 1 root root 46700 2023-01-27 11:42 rtl8723bs_fw
-rw-r--r-- 1 root root 14 2023-01-27 11:42 rtl8723bu_config
-rw-r--r-- 1 root root 21080 2023-01-27 11:42 rtl8723c_fw
-rw-r--r-- 1 root root 59 2023-01-27 11:42 rtl8723cs_cg_config
-rw-r--r-- 1 root root 18876 2023-01-27 11:42 rtl8723cs_cg_fw
-rw-r--r-- 1 root root 59 2023-01-27 11:42 rtl8723cs_vf_config
-rw-r--r-- 1 root root 18876 2023-01-27 11:42 rtl8723cs_vf_fw
-rw-r--r-- 1 root root 59 2023-01-27 11:42 rtl8723cs_xx_config
-rw-r--r-- 1 root root 29872 2023-01-27 11:42 rtl8723cs_xx_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8723d_config
-rw-r--r-- 1 root root 51240 2023-01-27 11:42 rtl8723d_fw
-rw-r--r-- 1 root root 29 2023-01-27 11:42 rtl8723ds_config
-rw-r--r-- 1 root root 55032 2023-01-27 11:42 rtl8723ds_fw
-rw-r--r-- 1 root root 6 2023-01-27 11:42 rtl8723f_config
-rw-r--r-- 1 root root 40652 2023-01-27 11:42 rtl8723f_fw
-rw-r--r-- 1 root root 25 2023-01-27 11:42 rtl8723fs_config
-rw-r--r-- 1 root root 40404 2023-01-27 11:42 rtl8723fs_fw
-rw-r--r-- 1 root root 6 2023-01-27 11:42 rtl8725a_config
-rw-r--r-- 1 root root 44308 2023-01-27 11:42 rtl8725a_fw
-rw-r--r-- 1 root root 25 2023-01-27 11:42 rtl8725as_config
-rw-r--r-- 1 root root 42148 2023-01-27 11:42 rtl8725as_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8761a_config
-rw-r--r-- 1 root root 68888 2023-01-27 11:42 rtl8761at8192ee_fw
-rw-r--r-- 1 root root 71900 2023-01-27 11:42 rtl8761at8812ae_fw
-rw-r--r-- 1 root root 48 2023-01-27 11:42 rtl8761at_config
-rw-r--r-- 1 root root 67608 2023-01-27 11:42 rtl8761at_fw
-rw-r--r-- 1 root root 72768 2023-01-27 11:42 rtl8761au8192ee_fw
-rw-r--r-- 1 root root 70100 2023-01-27 11:42 rtl8761au8812ae_fw
-rw-r--r-- 1 root root 66684 2023-01-27 11:42 rtl8761au_fw
-rw-r--r-- 1 root root 20 2023-01-27 11:42 rtl8761aw8192eu_config
-rw-r--r-- 1 root root 65544 2023-01-27 11:42 rtl8761aw8192eu_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8761b_config
-rw-r--r-- 1 root root 36888 2023-01-27 11:42 rtl8761b_fw
-rw-r--r-- 1 root root 29 2023-01-27 11:42 rtl8761bt_config
-rw-r--r-- 1 root root 37740 2023-01-27 11:42 rtl8761bt_fw
-rw-r--r-- 1 root root 26376 2023-01-27 11:42 rtl8761cs_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8821a_config
-rw-r--r-- 1 root root 40024 2023-01-27 11:42 rtl8821a_fw
-rw-r--r-- 1 root root 44 2023-01-27 11:42 rtl8821as_config
-rw-r--r-- 1 root root 40932 2023-01-27 11:42 rtl8821as_fw
-rw-r--r-- 1 root root 10 2023-01-27 11:42 rtl8821c_config
-rw-r--r-- 1 root root 48816 2023-01-27 11:42 rtl8821c_fw
-rw-r--r-- 1 root root 29 2023-01-27 11:42 rtl8821cs_config
-rw-r--r-- 1 root root 50824 2023-01-27 11:42 rtl8821cs_fw
-rw-r--r-- 1 root root 6 2023-01-27 11:42 rtl8822b_config
-rw-r--r-- 1 root root 51872 2023-01-27 11:42 rtl8822b_fw
-rw-r--r-- 1 root root 25 2023-01-27 11:42 rtl8822bs_config
-rw-r--r-- 1 root root 45708 2023-01-27 11:42 rtl8822bs_fw
-rw-r--r-- 1 root root 6 2023-01-27 11:42 rtl8822c_config
-rw-r--r-- 1 root root 54740 2023-01-27 11:42 rtl8822c_fw
-rw-r--r-- 1 root root 25 2023-01-27 11:42 rtl8822cs_config
-rw-r--r-- 1 root root 57552 2023-01-27 11:42 rtl8822cs_fw
-rw-r--r-- 1 root root 73 2023-01-27 11:42 rtl8852as_config
-rw-r--r-- 1 root root 27388 2023-01-27 11:42 rtl8852as_fw
-rw-r--r-- 1 root root 54 2023-01-27 11:42 rtl8852au_config
-rw-r--r-- 1 root root 50036 2023-01-27 11:42 rtl8852au_fw
-rw-r--r-- 1 root root 81176 2023-01-27 11:42 ssv6051-sw.bin
-rw-r--r-- 1 root root 2476 2023-01-27 11:42 ssv6051-wifi.cfg
-rw-r--r-- 1 root root 1566 2023-01-27 11:42 wifi_efuse_8189e.map
-rw-r--r-- 1 root root 1421 2023-01-27 11:42 wifi_efuse_8723bs-vq0.map
-rw-r--r-- 1 root root 1568 2023-01-27 11:42 wifi_efuse_8723cs.map
-rw-r--r-- 1 root root 1567 2023-01-27 11:42 wifi_efuse_8723ds.map
-rw-r--r-- 1 root root 1568 2023-01-27 11:42 wifi_efuse_8821cs.map
console:/vendor/etc/firmware # [10265.198400] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au

console:/vendor/etc/firmware #

C:\Users\Administrator>adb root
restarting adbd as root

C:\Users\Administrator>
C:\Users\Administrator>adb remount
Using overlayfs for /system
Using overlayfs for /vendor
Using overlayfs for /odm
Using overlayfs for /product
Using overlayfs for /system_ext
Now reboot your device for settings to take effect
remount succeeded

C:\Users\Administrator>cd P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware

C:\Users\Administrator>
C:\Users\Administrator>p:

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>
P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>dir
驱动器 P 中的卷是 3TB-P
卷的序列号是 6003-B5E8

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware 的目录

2023/01/27 18:58

.
2023/01/27 18:58 ..
2022/02/22 19:43 28,865 clm_bcm43752a2_ag.blob
2023/01/12 08:44 743,607 fw_bcm43752a2_ag.bin
2023/01/12 08:44 743,607 fw_bcm43752a2_ag_apsta.bin
2023/01/12 08:44 8,709 nvram_ap6275s.txt
4 个文件 1,524,788 字节
2 个目录 4,113,764,352 可用字节

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>adb push fw_bcm43752a2_ag.bin /vendor/etc/firmware
fw_bcm43752a2_ag.bin: 1 file pushed, 0 skipped. 18.9 MB/s (743607 bytes in 0.037s)

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>adb push fw_bcm43752a2_ag_apsta.bin /vendor/etc/firmware
fw_bcm43752a2_ag_apsta.bin: 1 file pushed, 0 skipped. 22.9 MB/s (743607 bytes in 0.031s)

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>adb push nvram_ap6275s.txt /vendor/etc/firmware
nvram_ap6275s.txt: 1 file pushed, 0 skipped. 0.1 MB/s (8709 bytes in 0.119s)

P:\AIO-3568J\android12-rk3568-ap6275s\vendor\rockchip\common\wifi\firmware>

再次打开WIFI：

console:/vendor/etc/firmware #
console:/vendor/etc/firmware #
console:/vendor/etc/firmware # [ 1464.032283] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.connectivity.rc:46)
[ 1464.041264] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.connectivity.rc:46)
[ 1464.041481] [dhd] dhd_open: Enter wlan0
[ 1464.041508] [dhd] dhd_open : no mutex held. set lock
[ 1464.041521] [dhd]
[ 1464.041521] Dongle Host Driver, version 100.10.545.12 (r826445-20200708-1)
[ 1464.041543] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
[ 1464.041555] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 1464.041568] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 1464.041578] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1464.041589] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[ 1464.041600] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[ 1464.346921] sdio_reset_comm():
[ 1464.466993] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1464.483940] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 1464.483975] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2)
[ 1464.500266] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 1464.541067] mmc3: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1464.547523] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1464.553940] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1464.565463] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1464.881945] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 1464.884647] dwmmc_rockchip fe000000.dwmmc: failed to set rate 100000Hz
[ 1464.884798] mmc_host mmc3: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1464.895726] dwmmc_rockchip fe000000.dwmmc: Successfully tuned phase to 267
[ 1464.895878] [dhd] sdioh_start: set sd_f2_blocksize 256
[ 1464.896316] [dhd]
[ 1464.896316]
[ 1464.896316] dhd_bus_devreset: == Power ON ==
[ 1464.896530] [dhd] F1 signature read @0x18000000=0x1042aae8
[ 1464.902476] [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[ 1464.903817] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[ 1464.904000] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 1464.904103] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 1464.904635] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/firmware/config.txt
[ 1464.904716] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_ag.bin
[ 1464.904762] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_ap6275s.txt
[ 1464.904816] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_ag.blob
[ 1464.904869] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
[ 1464.905687] [dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_ag.bin (743607 bytes) open success
[ 1464.976717] [dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_ap6275s.txt (8709 bytes) open success
[ 1464.976787] [dhd] NVRAM version: AP6275S_NVRAM_V1.4_20201116
[ 1464.977453] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 1465.038021] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 1465.038202] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=114 flags=0x4
[ 1465.038452] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[ 1465.038489] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 1465.040861] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1
[ 1465.042989] [dhd] dhd_os_open_image1: /vendor/etc/firmware/clm_bcm43752a2_ag.blob (28865 bytes) open success
[ 1465.044328] [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
[ 1465.059688] [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
[ 1465.061692] [dhd] Firmware up: op_mode=0x0005, MAC=10:2c:6b:7f:b0:ec
[ 1465.068125] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: 0
[ 1465.078415] [dhd] Driver: 100.10.545.12 (r826445-20200708-1)
[ 1465.078415] Firmware: wl0: Jul 13 2020 18:32:45 version 18.35.387.23.7 (b328500@shgit) (wlan=r880297) FWID 01-f50fdff0
[ 1465.078415] CLM: 9.9.5_SS (2019-12-04 01:26:12)
[ 1465.079111] [dhd] dhd_txglom_enable: enable 1
[ 1465.079124] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
[ 1465.079131] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
[ 1465.079141] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
[ 1465.079147] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
[ 1465.079161] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
[ 1465.081405] [dhd] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
[ 1465.083211] [dhd] dhd_pno_init: Support Android Location Service
[ 1465.107684] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 1465.108272] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[ 1465.108323] [dhd] dhd_rtt_init : FTM is not supported
[ 1465.109132] [dhd] dhd_rtt_ftm_config : failed to set config
[ 1465.109137] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 1465.112193] [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
[ 1465.112869] [dhd] failed to start ecounters
[ 1465.112894] [dhd] dhd_ecounter_configure Ecounters start failed
[ 1465.118152] [dhd] [INIT] logset:8 is preserve/chatty
[ 1465.119362] [dhd] [INIT] logset:10 is preserve/chatty
[ 1465.128883] [dhd] dhd_conf_set_country : set country CN, revision 0
[ 1465.133258] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
[ 1465.140830] [dhd-wlan0] wl_android_wifi_on : Success
[ 1465.191883] [dhd] dhd_open : the lock is released.
[ 1465.191912] [dhd] dhd_open: Exit wlan0 ret=0
[ 1465.191919] [dhd] [wlan0] tx queue started
[ 1465.196261] init: Unable to set property 'vendor.wlan.driver.version' from uid:1010 gid:1010 pid:285: SELinux permission check failed
[ 1465.196280] type=1107 audit(1675003636.806:189): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=vendor.wlan.driver.version pid=285 uid=1010 gid=1010 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=0'
[ 1465.230375] init: starting service 'wpa_supplicant'...
[ 1465.231670] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
[ 1465.234919] init: Control message: Processed ctl.interface_start for '[email protected]::ISupplicant/default' from pid: 154 (/system/bin/hwservicemanager)
[ 1465.392715] [dhd] P2P interface registered
[ 1465.392741] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: 0000000093680f83, wdev->net: (null)
[ 1465.432748] init: processing action (vendor.wifi.direct.interface=p2p-dev-wlan0) from (/vendor/etc/init/hw/init.connectivity.rc:53)
[ 1465.449398] [dhd] dhd_dbg_attach_pkt_monitor, 1501
[ 1465.480647] [dhd] net_os_enable_packet_filter: val = 0
[ 1465.481240] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 2
[ 1465.482699] [dhd] net_os_enable_packet_filter: val = 1
[ 1465.483194] [dhd] net_os_enable_packet_filter: val = 0
[ 1465.483908] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 3
[ 1465.485578] [dhd] net_os_enable_packet_filter: val = 1
[ 1465.486495] [dhd] dhd_set_suspend: Remove extra suspend setting
[ 1465.487219] [dhd] dhd_enable_packet_filter: enter, value = 0
[ 1465.519185] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 26, bssidx: 0
[ 1465.567695] type=1400 audit(1675003637.180:190): avc: denied { read } for comm="Binder:177_1" name="wakeup2" dev="sysfs" ino=16288 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 1465.572356] type=1400 audit(1675003637.183:191): avc: denied { read } for comm="Binder:177_1" name="wakeup9" dev="sysfs" ino=25215 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 1465.572635] type=1400 audit(1675003637.183:192): avc: denied { read } for comm="Binder:177_1" name="wakeup14" dev="sysfs" ino=28588 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 1465.574888] audit: audit_lost=69 audit_rate_limit=5 audit_backlog_limit=64
[ 1465.574924] audit: rate limit exceeded
[ 1465.576657] type=1400 audit(1675003637.183:193): avc: denied { read } for comm="Binder:177_1" name="wakeup12" dev="sysfs" ino=26116 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 1475.664779] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 27, bssidx: 0

console:/vendor/etc/firmware #
console:/vendor/etc/firmware #
console:/vendor/etc/firmware # [ 1485.532549] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 28, bssidx: 0
[ 1495.731051] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 29, bssidx: 0
[ 1505.770633] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 30, bssidx: 0
[ 1509.457256] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 1515.814239] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 31, bssidx: 0
[ 1525.541588] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 32, bssidx: 0
[ 1535.865768] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 33, bssidx: 0
[ 1545.903313] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 34, bssidx: 0
[ 1555.926909] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 35, bssidx: 0
[ 1565.966381] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 36, bssidx: 0

RK3568不用重启，先关闭WIFI，adb push推进去配对的固件，再打开WIFI就OK了！^_

参考资料：
https://www.zztongyun.com/article/rk3288%E4%B8%8Erk3568
https://www.jianshu.com/p/26ae7bbc91d7
http://www.360doc.com/content/22/1214/08/78357527_1060193430.shtml
https://www.eet-china.com/mp/a182768.html
RK3568外接AP6275SWIFI模块调试详解

https://blog.csdn.net/zhl232465/article/details/120992797
RK3568 Debian10 AP6275s wifi调试
火柴burnning
kernel\drivers\net\wireless\rockchip_wlan\rkwifi
配置内核以y打包到内核

添加固件
overlay\vendor\etc\firmware
BCM4362A2.hcd
clm_bcm43752a2_ag.blob

fw_bcm43752a2_ag.bin
fw_bcm43752a2_ag_apsta.bin
nvram_ap6275s.txt

https://blog.csdn.net/weixin_68294039/article/details/125911614
WIF调试分享（ap6256）
板子：rk3568
模块：ap6256
平台：android11

https://blog.csdn.net/weixin_43982460/article/details/116014460
RK3308B+AP6275S移植
在rk3308b平台移植rtl8821cs,rlt8821cs是wifi+bt一体的模组，主要记录下移植过程中需要注意的地方

https://blog.csdn.net/weixin_68294039/article/details/125552221
BT调试过程分享（ap6256）
板子：rk3568
模块：ap6256
平台：android11

https://blog.csdn.net/weixin_43245753/article/details/123999080
Rockchip RK3588 kernel dts解析之WIFI/BT

https://blog.csdn.net/jinnuo5764/article/details/108756539
rockchip移植ap6256蓝牙

https://zhuanlan.zhihu.com/p/140949443
https://blog.csdn.net/maimang1001/article/details/127102195
WIFI底层学习路程：iw，cfg80211，mac80211

https://zhuanlan.zhihu.com/p/141630753
wifi底层学习之路：二，无线配置管理服务cfg80211

https://www.ebaina.com/articles/140000005421
全志平台ap6476 wifi模组调试（3）调试&异常处理

https://blog.csdn.net/xierong1/article/details/127090636
rk3399调试WIFI

测试报告
2023/1/27 15:40

1、adb链接。
另外一个USB3.0不通，可能是硬件损坏！^_

2、横屏
3、1分钟休眠。最上面是NEVER
4、2个鼠标正常。
5、【未测试】TF卡？U盘？
6、adb和串口都可以进su【EBG模式编译】
7、WIFI可以上搜狐看短视频：www.sohu.com/tv.sohu.com
8、BT 可以连手机并正确接受图片！
9、声音/播音【异常】（耳机接联想手机是好的！）
播放4K、8K图像正常。音画同步？
MP3/WMA/AAC？

10、录音正常（有杂音）
计算机\rk3568_s\Internal shared storage\Documents\Records

11、以太网0【异常】
12、以太网1【异常】

1、【缺】鼠标右键返回
2、MIPI摄像头OV13850
3、MIPI的LCD和I2C的TP
4、

你可能感兴趣的:(杂质,ui)

【EI复现】【基于改进粒子群算法求解】一种建筑集成光储系统规划运行综合优化方法（Matlab代码实现）砌墙_2301 算法 matlab 人工智能
欢迎来到本博客❤️❤️博主优势：博客内容尽量做到思维缜密，逻辑清晰，为了方便读者。⛳️座右铭：行百里者，半于九十。本文目录如下：目录1概述2运行结果3参考文献4Matlab代码、数据、文档讲解1概述文献来源：摘要：容量优化配置与能量调度是建筑集成光储系统(buildingintegratedphotovoltaic,BIPV)规划和运行阶段的核心问题，合理的容量配置及能量调度能够有效提升系统的经济
LeetCode - #195 Swift 实现打印文件中的第十行网罗开发 Swift vue.js leetcode swift
网罗开发（小红书、快手、视频号同名）大家好，我是展菲，目前在上市企业从事人工智能项目研发管理工作，平时热衷于分享各种编程领域的软硬技能知识以及前沿技术，包括iOS、前端、HarmonyOS、Java、Python等方向。在移动端开发、鸿蒙开发、物联网、嵌入式、云原生、开源等领域有深厚造诣。图书作者：《ESP32-C3物联网工程开发实战》图书作者：《SwiftUI入门，进阶与实战》超级个体：CO
python 双端口截图数据传输显示 myzzb 网络 python 图像处理 tkinter 学习
importioimporttimeimportsocketimportpyautoguidefcapture_and_send_image():whileTrue:try:#pil_image=Image.new("RGB",(160,90),(255,255,255))##截图screenshot=pyautogui.screenshot()##缩小图片new_size=(screenshot
GPT4All:免费使用本地运行无需GPU的基于C++的GPT模型和UI: A free-to-use, locally running, privacy-aware chatbot. No GPU AI天才研究院 ChatGPT 大数据AI人工智能 LLM大模型落地实战指南 gpt 人工智能语言模型自然语言处理编程实践开发语言 c++
目录GPT4All:https://github.co:m/nomic-ai/gpt4allGPT4AllChatUIGPT4All聊天用户界面效果测试问题：HowtowriteamultipleThreadcodeInJava?输出：GPT4All如何运作RunningLLMsonCPU在CPU上运行LLMSideloadinganyggMLmodel加载任何ggML模型GPT4ALL:目前已经
【物联网初探】- 07 - ESP32 利用 wifi 进行 UDP 通信（Arduino IDE）银时大魔王嵌入式学习记录物联网 esp32 arduino
【物联网初探】-07-ESP32利用wifi进行UDP通信（ArduinoIDE）文章目录1.硬件、接线、环境配置2.ESP32下的wifi基本功能(arduino)3.ESP32下UDP通信3.1TCP/UDP的极简释义3.2ESP32UDP通信小例子3.2.1准备工具3.2.2通信流程3.3UDP简单测试1.硬件、接线、环境配置【物联网初探】-01-ESP32开发环境搭建(ArduinoIDE
探索AWS Event Fork Pipelines：构建弹性事件驱动架构费津钊Bobbie
探索AWSEventForkPipelines：构建弹性事件驱动架构aws-serverless-event-fork-pipelinesAWSEventForkPipelineshelpsyoubuildevent-drivenserverlessapplicationsbyprovidingpipelinesforcommonevent-handlingrequirements,suchase
python2 中使用pip2 install package_name的时候报错：AttributeError: ‘int‘ object has no attribute ‘endswith‘ 点亮~黑夜 16—各种错误和bug（你的痛我的痛痛痛痛）python
文章目录1错误说明2错误解决方式1错误说明1、在python2的环境下使用pip2install安装库包的时候报错：AttributeError:'int'objecthasnoattribute'endswith'2、具体报错信息如下(base)shl@zhihui-mint:~/tools$pip2installpyquaternionException:Traceback(mostrecen
libaom threads线程配置 fantasy_arch 视频编解码 av1
一参数配置parse_stream_params}elseif(arg_match(&arg,&g_av1_codec_arg_defs.threads,argi)){config->cfg.g_threads=arg_parse_uint(&arg);二使用线程个数参数g_threadsintav1_compute_num_fp_contexts(AV1_PRIMARY*ppi,AV1Encod
深入理解Qt Widgets UI设计与实现 QT性能优化QT原理源码QT界面美化 qt qt6.3 qt5 QT教程 c++
深入理解QtWidgetsUI设计与实现补天云火鸟博客创作软件补天云网站1响应式编程进阶1.1理解信号和槽机制1.1.1理解信号和槽机制理解信号和槽机制深入理解QtWidgetsUI设计与实现,信号与槽机制在深入探讨QtWidgetsUI设计与实现过程中，理解信号与槽这一核心概念是构建动态、响应式用户界面的关键。无论是开发基于事件驱动的应用程序还是构建复杂交互功能，Qt的信号与槽机制提供了一种高效
openwrt配置strongswan对接hillstone ipsec的笔记 d9394952 openwrt openwrt ipsec strongswan
一、主要参考资料：https://openwrt.org/docs/guide-user/services//ipsec/strongswan/roadwarriorhttps://openwrt.org/docs/guide-user/services//ipsec/strongswan/basichttps://openwrt.org/docs/guide-user/services//ips
《Buildozer打包实战指南》第五节在安卓模拟器和真机上运行apk文件并查看日志 la_vie_est_belle buildozer python打包apk python打包安卓安卓模拟器夜神 python
目录5.1在安卓模拟器上运行apk文件并查看日志5.2在真机上运行并查看日志5.3查看apk包内日志成功打包出apk文件并不代表真正成功，只有apk文件成功运行没有报错才算是。在本节，笔者会带大家了解如何将apk文件运行于安卓模拟器和真机上并查看运行日志。5.1在安卓模拟器上运行apk文件并查看日志笔者用的是夜神模拟器，读者可以去官网上下载。安装步骤很简单，笔者这里就不再赘述。安装完毕后打开模拟器
股票数据接口API实例代码python、JAVA等多种语言演示免费获取实时数据、历史数据、CDMA、KDJ等指标数据配有API说明文档 Eumenides_max python java 开发语言
本文中所有接口均可直接在浏览器打开获取数据，为了便于大家验证有效性，已经做好了超链接，直接点击即可！沪深两市股票列表API接口链接（可点击验证）：https://api.mairui.club/hslt/list/b997d4403688d5e66a【实时数据接口】沪深两市实时交易数据接口API接口链接（可点击验证）：https://api.mairui.club/hsrl/ssjy/000001
python 应用开发日志工具包—— loguru 添财小哥 python 应用开发 python pip
一、简介Loguru是一个Python库，旨在让日志记录变得愉快。你是否曾因为懒得配置日志记录器而直接使用print()？…我有过，然而日志记录对于每个应用程序都是基本的，它简化了调试过程。使用Loguru，你没有理由不从一开始就使用日志记录，这就像导入fromloguruimportlogger一样简单。此外，这个库旨在通过添加一系列有用的功能来解决标准日志记录器的缺陷，从而减轻Python日志
前端工程化都有哪些及优化方案光影少年前端前端框架基带工程
一、前端工程化的主要组成部分1.模块化模块化是将复杂的程序分解为若干小的独立模块，每个模块负责一个功能。常用的模块化方案包括：ES6模块（import/export）CommonJS（require/module.exports，Node.js中常用）AMD（define/require，如RequireJS）优化方案：尽量使用ES6模块，因为它是JavaScript的标准，支持更好的静态分析和T
nodejs应用ogg转换mp3格式热情仔 js ffmpeg ogg
首先你要安装ffmpeg三选一npminstallffmpegcnpminstallffmpegyarninstallffmpeg看下目录constffmpeg=require('ffmpeg')constfs=require("fs");constpath=require('path');//先读取所有的ogg文件constfiles=fs.readdirSync("./ogg");letcou
基于R-CNN深度学习的无人机目标检测系统：数据集、模型和UI界面的完整实现 2025年数学建模美赛 R-CNN检测系统深度学习 cnn 无人机计算机视觉目标检测人工智能
摘要随着无人机技术的迅猛发展，无人机在军事、农业、环境监测等多个领域的应用日益广泛。无人机目标检测系统的建设成为提升无人机自主飞行和环境感知能力的重要环节。本文将详细介绍如何构建一个基于深度学习的无人机目标检测系统，采用R-CNN（区域卷积神经网络）算法，通过用户界面设计和数据集处理，实现高效的目标检测功能。通过本项目，旨在为无人机目标检测提供一种可行的解决方案，并提高其在复杂环境下的工作效率。目
搭建Hadoop与Hive环境达达玲玲 hadoop hive 大数据
当搭建Hadoop与Hive环境时，以下是每个步骤的详细操作说明：1.安装并配置CentOS7操作系统：-下载CentOS7ISO镜像文件，并通过虚拟机或物理机安装CentOS7操作系统。-在安装过程中，为系统分配必要的网络、用户和权限。2.安装Java开发环境：-下载适合您的系统的JavaJDK版本。-使用命令或GUI工具安装JavaJDK。-配置JAVA_HOME环境变量：-打开终端，输入以下
「File」文本格式之 PugiXML对XML格式解析何曾参静谧「Lib」第三方库详解 xml
✨博客主页何曾参静谧的博客（✅关注、点赞、⭐收藏、转发）全部专栏（专栏会有变化，以最新发布为准）「Win」Windows程序设计「IDE」集成开发环境「定制」定制开发集合「C/C++」C/C++程序设计「DSA」数据结构与算法「UG/NX」NX二次开发「QT」QT5程序设计「File」数据文件格式「UG/NX」BlockUI集合「Py」Python程序设计「Math」探秘数学世界「PK」Paras
「C/C++」C++经验篇之常见的错误处理策略何曾参静谧 c语言 c++开发语言
✨博客主页何曾参静谧的博客（✅关注、点赞、⭐收藏、转发）全部专栏（专栏会有变化，以最新发布为准）「Win」Windows程序设计「IDE」集成开发环境「定制」定制开发集合「C/C++」C/C++程序设计「DSA」数据结构与算法「UG/NX」NX二次开发「QT」QT5程序设计「File」数据文件格式「UG/NX」BlockUI集合「Py」Python程序设计「Math」探秘数学世界「PK」Paras
「Py」模块篇之 Python中的subprocess模块详解何曾参静谧「Py」Python程序设计 python 数据库开发语言
✨博客主页何曾参静谧的博客（✅关注、点赞、⭐收藏、转发）全部专栏（专栏会有变化，以最新发布为准）「Win」Windows程序设计「IDE」集成开发环境「定制」定制开发集合「C/C++」C/C++程序设计「DSA」数据结构与算法「UG/NX」NX二次开发「QT」QT5程序设计「File」数据文件格式「UG/NX」BlockUI集合「Py」Python程序设计「Math」探秘数学世界「PK」Paras
GRAPHARG——学习大哥喝阔落学习 flask python
20250106项目git地址：https://github.com/microsoft/graphrag.git版本：1.2.0###Thisconfigfilecontainsrequiredcoredefaultsthatmustbeset,alongwithahandfulofcommonoptionalsettings.###Forafulllistofavailablesettings
在Eclipse安装时报错：Version 1.8.0_281 of the JVM is not suitable for this product CheeseZhangz 学习 eclipse windows java jdk
近日，在QQ群里看到鹏飞大佬的文章，突然想coding一发，又因为没用过Eclipse，于是开始撸IDE…可谁曾想，前方正有一堆坑…下载是一坑百度搜索Eclipse，打开官网下载，点击下载，官网的下载速度就是…满心欢喜，开局惊喜啊：(So记住这个小海豚，可爱吧~清华大学开源软件镜像站,致力于为国内和校内用户提供高质量的开源软件镜像、Linux镜像源服务,帮助用户更方便地获取开源软件https://
利用IDEA反编译jar包 star9595 Java 实用技能
有时使用jd-gui进行反编译不太靠谱，可以通过idea反编译方式，两者进行对比：1.利用IDEA反编译jar包(idea需要安装插件JavaBytecodeDecomplier)2.在需要编译的jar包的目录下，打开命令行界面，输入以下命令：java-cp"D:/ProgramFiles/JetBrains/IntelliJIDEA2019.1.3/plugins/java-decompiler
系统架构设计中的非功能需求分析与设计 Evaporator Core 系统架构设计师 Oracle Python开发经验系统架构需求分析
引言在系统架构设计中，非功能需求（Non-FunctionalRequirements,NFRs）与功能需求同样重要。非功能需求定义了系统的质量属性，如性能、可用性、安全性、可扩展性等。这些需求虽然不直接描述系统的功能，但它们对系统的成功与否起着决定性作用。本文将深入探讨非功能需求的分析与设计方法，帮助读者理解如何在系统架构设计中有效地处理非功能需求。第一章：非功能需求的分类与重要性非功能需求通常
银河麒麟V10 SP1 aarch64镜像：开启ARM64架构的新纪元咎歆珍Ingrid
银河麒麟V10SP1aarch64镜像：开启ARM64架构的新纪元【下载地址】银河麒麟V10SP1aarch64镜像下载-**文件名**:Kylin-Server-10-SP1-Release-Build04-20200711-arm64.iso-**文件类型**:ISO镜像文件-**适用架构**:aarch64(ARM64)-**版本**:银河麒麟V10SP1-**发布日期**:2020年7月1
Python+Playwright(Nuitka、Pyinstaller打包) xiaohouzi112233 nuitka打包自动化办公 python 开发语言
Python+Playwright及软件打包Selenium/Playwright网页自动化测试工具在做办公自动化过程中接触了Selenium这个工具，方便爬取数据或者自动模拟鼠标/键盘操作，后面发现了更牛逼的Playwright，而且可以自动录制操作，直接生成相关代码，Playwright具体使用不在这里介绍，随便浏览器输入Playwright，就会发现很详细的内容。Python+Playwri
vue项目中所使用的element-UI / echarts Stephy_Yy #调研 #vue学习笔记
高清版思维导图见后台管理项目地址1.login登录页面表单在Form组件中，每一个表单域由一个Form-Item组件构成，表单域中可以放置各种类型的表单控件，包括Input、Select、Checkbox、Radio、Switch、DatePicker、TimePickerForm组件提供了表单验证的功能，只需要通过rules属性传入约定的验证规则，并将Form-Item的prop属性设置为需校验
生成随机验证码字符串密码沉迷... javascript javascript 前端
安装$npmigeneration-random-character引入方式const{generateRandomPassword}=require(‘generation-random-character’)import{generateRandomPassword}from‘generation-random-character’importallRandomlyGeneratedfrom‘
表格组件二次封装（element+vue） syste_m_ vue.js javascript 前端
后端管理系统中，常用表格展示数据，统一维护，统一表格风格，二次封装一个基于elementUI中的el-table封装一个简单的表格组件。封装组件分为四部分，表单查询条件、头部操作按钮、表格数据展示、数据分页操作。一、表格组件封装1、表单查询条件封装表单项，定义name、label，表单项默认为输入框，scopedSlots为表单项插槽。//表单项queryForms:[{dataKey:'nick
vite build报错 Unexpected token (Note that you need plugins to import files that are not JavaScript) 实践是最好的老师 vue javascript 前端 vue.js
原因是我在console.log语句想打印出环境变量console.log(‘import.meta.env.MODE’,import.meta.env.MODE)删除上面console.log语句就能正常打包了,并下面语句能正常打包和运行constconfig:any={dev:{baseUrl:‘http://baiduTest.com’//测试接口域名},master:{baseUrl:‘h
异常的核心类Throwable 无量 java 源码异常处理 exception
java异常的核心是Throwable，其他的如Error和Exception都是继承的这个类里面有个核心参数是detailMessage，记录异常信息，getMessage核心方法，获取这个参数的值，我们可以自己定义自己的异常类，去继承这个Exception就可以了，方法基本上，用父类的构造方法就OK，所以这么看异常是不是很easy package com.natsu;
mongoDB 游标（cursor）实现分页迭代开窍的石头 mongodb
上篇中我们讲了mongoDB 中的查询函数，现在我们讲mongo中如何做分页查询如何声明一个游标 var mycursor = db.user.find({_id:{$lte:5}}); 迭代显示游标数
MySQL数据库INNODB 表损坏修复处理过程 0624chenhong tomcat mysql
最近mysql数据库经常死掉，用命令net stop mysql命令也无法停掉，关闭Tomcat的时候，出现Waiting for N instance(s) to be deallocated 信息。查了下，大概就是程序没有对数据库连接释放，导致Connection泄露了。因为用的是开元集成的平台，内部程序也不可能一下子给改掉的，就验证一下咯。启动Tomcat,用户登录系统，用netstat -
剖析如何与设计人员沟通不懂事的小屁孩工作
最近做图烦死了，不停的改图，改图……。烦，倒不是因为改，而是反反复复的改，人都会死。很多需求人员不知该如何与设计人员沟通，不明白如何使设计人员知道他所要的效果，结果只能是沟通变成了扯淡，改图变成了应付。那应该如何与设计人员沟通呢？我认为设计人员与需求人员先天就存在语言障碍。对一个合格的设计人员来说，整天玩的都是点、线、面、配色，哪种构图看起来协调；哪种配色看起来合理心里跟明镜似的，
qq空间刷评论工具换个号韩国红果果 JavaScript
var a=document.getElementsByClassName('textinput'); var b=[]; for(var m=0;m<a.length;m++){ if(a[m].getAttribute('placeholder')!=null) b.push(a[m]) } var l
S2SH整合之session 灵静志远 spring AOP struts session
错误信息： Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'cartService': Scope 'session' is not active for the current thread; consider defining a scoped
xmp标签 a-john 标签
今天在处理数据的显示上遇到一个问题： var html = '<li><div class="pl-nr"><span class="user-name">' + user + '</span>' + text + '</div></li>'; ulComme
Ajax的常用技巧（2）---实现Web页面中的级联菜单 aijuans Ajax
在网络上显示数据，往往只显示数据中的一部分信息，如文章标题，产品名称等。如果浏览器要查看所有信息，只需点击相关链接即可。在web技术中，可以采用级联菜单完成上述操作。根据用户的选择，动态展开，并显示出对应选项子菜单的内容。在传统的web实现方式中，一般是在页面初始化时动态获取到服务端数据库中对应的所有子菜单中的信息，放置到页面中对应的位置，然后再结合CSS层叠样式表动态控制对应子菜单的显示或者隐
天-安-门，好高 atongyeye 情感
我是85后，北漂一族，之前房租1100，因为租房合同到期，再续，房租就要涨150。最近网上新闻，地铁也要涨价。算了一下，涨价之后，每次坐地铁由原来2块变成6块。仅坐地铁费用，一个月就要涨200。内心苦痛。晚上躺在床上一个人想了很久，很久。我生在农
android 动画百合不是茶 android 透明度平移缩放旋转
android的动画有两种 tween动画和Frame动画 tween动画;,透明度,缩放,旋转,平移效果 Animation 动画 AlphaAnimation 渐变透明度 RotateAnimation 画面旋转 ScaleAnimation 渐变尺寸缩放 TranslateAnimation 位置移动 Animation
查看本机网络信息的cmd脚本 bijian1013 cmd
@echo 您的用户名是：%USERDOMAIN%\%username%>"%userprofile%\网络参数.txt" @echo 您的机器名是：%COMPUTERNAME%>>"%userprofile%\网络参数.txt" @echo ___________________>>"%userprofile%\
plsql 清除登录过的用户征客丶 plsql
tools---preferences----logon history---history 把你想要删除的删除 -------------------------------------------------------------------- 若有其他凝问或文中有错误，请及时向我指出，我好及时改正，同时也让我们一起进步。 email ： binary_spac
【Pig一】Pig入门 bit1129 pig
Pig安装 1.下载pig wget http://mirror.bit.edu.cn/apache/pig/pig-0.14.0/pig-0.14.0.tar.gz 2. 解压配置环境变量如果Pig使用Map/Reduce模式，那么需要在环境变量中，配置HADOOP_HOME环境变量 expor
Java 线程同步几种方式 BlueSkator volatile synchronized ThredLocal ReenTranLock Concurrent
为何要使用同步？ java允许多线程并发控制，当多个线程同时操作一个可共享的资源变量时（如数据的增删改查），将会导致数据不准确，相互之间产生冲突，因此加入同步锁以避免在该线程没有完成操作之前，被其他线程的调用，从而保证了该变量的唯一性和准确性。 1.同步方法&
StringUtils判断字符串是否为空的方法（转帖） BreakingBad null StringUtils “”
转帖地址：http://www.cnblogs.com/shangxiaofei/p/4313111.html public static boolean isEmpty(String str) 　　判断某字符串是否为空，为空的标准是 str== null 或 str.length()== 0
编程之美-分层遍历二叉树 bylijinnan java 数据结构算法编程之美
import java.util.ArrayList; import java.util.LinkedList; import java.util.List; public class LevelTraverseBinaryTree { /** * 编程之美分层遍历二叉树 * 之前已经用队列实现过二叉树的层次遍历，但这次要求输出换行，因此要
jquery取值和ajax提交复习记录 chengxuyuancsdn jquery取值 ajax提交
// 取值 // alert($("input[name='username']").val()); // alert($("input[name='password']").val()); // alert($("input[name='sex']:checked").val()); // alert($("
推荐国产工作流引擎嵌入式公式语法解析器-IK Expression comsci java 应用服务器工作 Excel 嵌入式
这个开源软件包是国内的一位高手自行研制开发的，正如他所说的一样，我觉得它可以使一个工作流引擎上一个台阶。。。。。。欢迎大家使用，并提出意见和建议。。。 ----------转帖--------------------------------------------------- IK Expression是一个开源的（OpenSource），可扩展的（Extensible），基于java语言
关于系统中使用多个PropertyPlaceholderConfigurer的配置及PropertyOverrideConfigurer daizj spring
1、PropertyPlaceholderConfigurer Spring中PropertyPlaceholderConfigurer这个类，它是用来解析Java Properties属性文件值，并提供在spring配置期间替换使用属性值。接下来让我们逐渐的深入其配置。基本的使用方法是：(1) <bean id="propertyConfigurerForWZ&q
二叉树:二叉搜索树 dieslrae 二叉树
所谓二叉树,就是一个节点最多只能有两个子节点,而二叉搜索树就是一个经典并简单的二叉树.规则是一个节点的左子节点一定比自己小,右子节点一定大于等于自己(当然也可以反过来).在树基本平衡的时候插入,搜索和删除速度都很快,时间复杂度为O(logN).但是,如果插入的是有序的数据,那效率就会变成O(N),在这个时候,树其实变成了一个链表. tree代码:
C语言字符串函数大全 dcj3sjt126com c function
C语言字符串函数大全函数名: stpcpy 功能: 拷贝一个字符串到另一个用法: char *stpcpy(char *destin, char *source); 程序例: #include <stdio.h> #include <string.h> int main
友盟统计页面技巧 dcj3sjt126com 技巧
在基类调用就可以了, 基类ViewController示例代码 -(void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; [MobClick beginLogPageView:[NSString stringWithFormat:@"%@",self.class]];
window下在同一台机器上安装多个版本jdk，修改环境变量不生效问题处理办法 flyvszhb java jdk
window下在同一台机器上安装多个版本jdk，修改环境变量不生效问题处理办法本机已经安装了jdk1.7，而比较早期的项目需要依赖jdk1.6，于是同时在本机安装了jdk1.6和jdk1.7. 安装jdk1.6前，执行java -version得到 C:\Users\liuxiang2>java -version java version "1.7.0_21&quo
Java在创建子类对象的同时会不会创建父类对象 happyqing java 创建子类对象父类对象
1.在thingking in java 的第四版第六章中明确的说了，子类对象中封装了父类对象， 2."When you create an object of the derived class, it contains within it a subobject of the base class. This subobject is the sam
跟我学spring3 目录贴及电子书下载 jinnianshilongnian spring
一、《跟我学spring3》电子书下载地址：《跟我学spring3》（1-7 和 8-13） http://jinnianshilongnian.iteye.com/blog/pdf 跟我学spring3系列 word原版下载二、源代码下载最新依
第12章 Ajax（上） onestopweb Ajax
index.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/
BI and EIM 4.0 at a glance blueoxygen BO
http://www.sap.com/corporate-en/press.epx?PressID=14787 有机会研究下EIM家族的两个新产品~~~~ New features of the 4.0 releases of BI and EIM solutions include: Real-time in-memory computing –
Java线程中yield与join方法的区别 tomcat_oracle java
长期以来，多线程问题颇为受到面试官的青睐。虽然我个人认为我们当中很少有人能真正获得机会开发复杂的多线程应用(在过去的七年中，我得到了一个机会)，但是理解多线程对增加你的信心很有用。之前，我讨论了一个wait()和sleep()方法区别的问题，这一次，我将会讨论join()和yield()方法的区别。坦白的说，实际上我并没有用过其中任何一个方法，所以，如果你感觉有不恰当的地方，请提出讨论。 &nb
android Manifest.xml选项阿尔萨斯 Manifest
结构继承关系 public final class Manifest extends Objectjava.lang.Objectandroid.Manifest 内部类 class Manifest.permission权限 class Manifest.permission_group权限组构造函数 public Manifest () 详细 androi
Oracle实现类split函数的方 zhaoshijie oracle
关键字：Oracle实现类split函数的方项目里需要保存结构数据，批量传到后他进行保存，为了减小数据量，子集拼装的格式，使用存储过程进行保存。保存的过程中需要对数据解析。但是oracle没有Java中split类似的函数。从网上找了一个，也补全了一下。 CREATE OR REPLACE TYPE t_split_100 IS TABLE OF VARCHAR2(100); cr