spring-boot-starter-data-redis2.X连接redis7
由于redis7引入了acl机制，可以配置用户权限，
比如配置了一个普通用户 test，权限为 test_ 前缀的key可操作
springboot想要连接，并没有设置用户名的地方，
跟了源码，jedis客户端是支持的，但是springboot自动配置类并没有用用户名去连接，因此需要手动覆盖一些源码去实现该功能；可能高版本springboot没这个问题，但由于项目用的1.8，高版本需要升级jdk，不可能的；
以下实现方式纯属跟代码去改造的，可能还有其他方式，但是我在网上也没有搜到解决办法
我的项目使用的是jedis，lettuce我没看
org.springframework.boot
spring-boot-starter-data-redis
2.3.7.RELEASE
io.lettuce
lettuce-core
redis.clients
jedis
3.3.0
springboot通过用户名连接单机版redis7，
连接配置如下
spring:
redis:
host: ip
port: 6379
# 密码
user: test
password: test@123只需要覆盖一个文件
新建包目录 redis.clients.jedis
新建类BinaryClient.java
package redis.clients.jedis;
import org.apache.commons.lang3.StringUtils;
import redis.clients.jedis.Protocol.Keyword;
import redis.clients.jedis.params.*;
import redis.clients.jedis.util.SafeEncoder;
import javax.net.ssl.HostnameVerifier;
import javax.net.ssl.SSLParameters;
import javax.net.ssl.SSLSocketFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Map;
import java.util.Map.Entry;
import static redis.clients.jedis.Protocol.Command.EXISTS;
import static redis.clients.jedis.Protocol.Command.GET;
import static redis.clients.jedis.Protocol.Command.KEYS;
import static redis.clients.jedis.Protocol.Command.PING;
import static redis.clients.jedis.Protocol.Command.PSUBSCRIBE;
import static redis.clients.jedis.Protocol.Command.PUNSUBSCRIBE;
import static redis.clients.jedis.Protocol.Command.SET;
import static redis.clients.jedis.Protocol.Command.SUBSCRIBE;
import static redis.clients.jedis.Protocol.Command.TIME;
import static redis.clients.jedis.Protocol.Command.UNSUBSCRIBE;
import static redis.clients.jedis.Protocol.Command.*;
import static redis.clients.jedis.Protocol.Keyword.*;
import static redis.clients.jedis.Protocol.toByteArray;
public class BinaryClient extends Connection {
private boolean isInMulti;
private String user;
private String password;
private int db;
private boolean isInWatch;
{
String user = SpringUtils.getApplicationContext().getEnvironment().getProperty("spring.redis.user");
if(StringUtils.isNotBlank(user)){
this.user = user;
}
}
public BinaryClient() {
super();
}
public BinaryClient(final String host) {
super(host);
}
public BinaryClient(final String host, final int port) {
super(host, port);
}
public BinaryClient(final String host, final int port, final boolean ssl) {
super(host, port, ssl);
}
public BinaryClient(final String host, final int port, final boolean ssl,
final SSLSocketFactory sslSocketFactory, final SSLParameters sslParameters,
final HostnameVerifier hostnameVerifier) {
super(host, port, ssl, sslSocketFactory, sslParameters, hostnameVerifier);
}
public BinaryClient(final JedisSocketFactory jedisSocketFactory) {
super(jedisSocketFactory);
}
public boolean isInMulti() {
return isInMulti;
}
public boolean isInWatch() {
return isInWatch;
}
private byte[][] joinParameters(byte[] first, byte[][] rest) {
byte[][] result = new byte[rest.length + 1][];
result[0] = first;
System.arraycopy(rest, 0, result, 1, rest.length);
return result;
}
private byte[][] joinParameters(byte[] first, byte[] second, byte[][] rest) {
byte[][] result = new byte[rest.length + 2][];
result[0] = first;
result[1] = second;
System.arraycopy(rest, 0, result, 2, rest.length);
return result;
}
public void setUser(final String user) { this.user = user; }
public void setPassword(final String password) {
this.password = password;
}
public void setDb(int db) {
this.db = db;
}
@Override
public void connect() {
if (!isConnected()) {
super.connect();
if (user != null&&password !=null) {
auth(user, password);
getStatusCodeReply();
} else if (password != null) {
auth(password);
getStatusCodeReply();
}
if (db > 0) {
select(db);
getStatusCodeReply();
}
}
}
public void ping() {
sendCommand(PING);
}
public void ping(final byte[] message) {
sendCommand(PING, message);
}
public void set(final byte[] key, final byte[] value) {
sendCommand(SET, key, value);
}
public void set(final byte[] key, final byte[] value, final SetParams params) {
sendCommand(SET, params.getByteParams(key, value));
}
public void get(final byte[] key) {
sendCommand(GET, key);
}
public void quit() {
db = 0;
sendCommand(QUIT);
}
public void exists(final byte[]... keys) {
sendCommand(EXISTS, keys);
}
public void del(final byte[]... keys) {
sendCommand(DEL, keys);
}
public void unlink(final byte[]... keys) {
sendCommand(UNLINK, keys);
}
public void type(final byte[] key) {
sendCommand(TYPE, key);
}
public void flushDB() {
sendCommand(FLUSHDB);
}
public void keys(final byte[] pattern) {
sendCommand(KEYS, pattern);
}
public void randomKey() {
sendCommand(RANDOMKEY);
}
public void rename(final byte[] oldkey, final byte[] newkey) {
sendCommand(RENAME, oldkey, newkey);
}
public void renamenx(final byte[] oldkey, final byte[] newkey) {
sendCommand(RENAMENX, oldkey, newkey);
}
public void dbSize() {
sendCommand(DBSIZE);
}
public void expire(final byte[] key, final int seconds) {
sendCommand(EXPIRE, key, toByteArray(seconds));
}
public void expireAt(final byte[] key, final long unixTime) {
sendCommand(EXPIREAT, key, toByteArray(unixTime));
}
public void ttl(final byte[] key) {
sendCommand(TTL, key);
}
public void touch(final byte[]... keys) {
sendCommand(TOUCH, keys);
}
public void select(final int index) {
sendCommand(SELECT, toByteArray(index));
}
public void swapDB(final int index1, final int index2) {
sendCommand(SWAPDB, toByteArray(index1), toByteArray(index2));
}
public void move(final byte[] key, final int dbIndex) {
sendCommand(MOVE, key, toByteArray(dbIndex));
}
public void flushAll() {
sendCommand(FLUSHALL);
}
public void getSet(final byte[] key, final byte[] value) {
sendCommand(GETSET, key, value);
}
public void mget(final byte[]... keys) {
sendCommand(MGET, keys);
}
public void setnx(final byte[] key, final byte[] value) {
sendCommand(SETNX, key, value);
}
public void setex(final byte[] key, final int seconds, final byte[] value) {
sendCommand(SETEX, key, toByteArray(seconds), value);
}
public void mset(final byte[]... keysvalues) {
sendCommand(MSET, keysvalues);
}
public void msetnx(final byte[]... keysvalues) {
sendCommand(MSETNX, keysvalues);
}
public void decrBy(final byte[] key, final long decrement) {
sendCommand(DECRBY, key, toByteArray(decrement));
}
public void decr(final byte[] key) {
sendCommand(DECR, key);
}
public void incrBy(final byte[] key, final long increment) {
sendCommand(INCRBY, key, toByteArray(increment));
}
public void incrByFloat(final byte[] key, final double increment) {
sendCommand(INCRBYFLOAT, key, toByteArray(increment));
}
public void incr(final byte[] key) {
sendCommand(INCR, key);
}
public void append(final byte[] key, final byte[] value) {
sendCommand(APPEND, key, value);
}
public void substr(final byte[] key, final int start, final int end) {
sendCommand(SUBSTR, key, toByteArray(start), toByteArray(end));
}
public void hset(final byte[] key, final byte[] field, final byte[] value) {
sendCommand(HSET, key, field, value);
}
public void hset(final byte[] key, final Map hash) {
final byte[][] params = new byte[1 + hash.size() * 2][];
int index = 0;
params[index++] = key;
for (final Entry entry : hash.entrySet()) {
params[index++] = entry.getKey();
params[index++] = entry.getValue();
}
sendCommand(HSET, params);
}
public void hget(final byte[] key, final byte[] field) {
sendCommand(HGET, key, field);
}
public void hsetnx(final byte[] key, final byte[] field, final byte[] value) {
sendCommand(HSETNX, key, field, value);
}
public void hmset(final byte[] key, final Map hash) {
final List params = new ArrayList<>();
params.add(key);
for (final Entry entry : hash.entrySet()) {
params.add(entry.getKey());
params.add(entry.getValue());
}
sendCommand(HMSET, params.toArray(new byte[params.size()][]));
}
public void hmget(final byte[] key, final byte[]... fields) {
sendCommand(HMGET, joinParameters(key, fields));
}
public void hincrBy(final byte[] key, final byte[] field, final long value) {
sendCommand(HINCRBY, key, field, toByteArray(value));
}
public void hexists(final byte[] key, final byte[] field) {
sendCommand(HEXISTS, key, field);
}
public void hdel(final byte[] key, final byte[]... fields) {
sendCommand(HDEL, joinParameters(key, fields));
}
public void hlen(final byte[] key) {
sendCommand(HLEN, key);
}
public void hkeys(final byte[] key) {
sendCommand(HKEYS, key);
}
public void hvals(final byte[] key) {
sendCommand(HVALS, key);
}
public void hgetAll(final byte[] key) {
sendCommand(HGETALL, key);
}
public void rpush(final byte[] key, final byte[]... strings) {
sendCommand(RPUSH, joinParameters(key, strings));
}
public void lpush(final byte[] key, final byte[]... strings) {
sendCommand(LPUSH, joinParameters(key, strings));
}
public void llen(final byte[] key) {
sendCommand(LLEN, key);
}
public void lrange(final byte[] key, final long start, final long stop) {
sendCommand(LRANGE, key, toByteArray(start), toByteArray(stop));
}
public void ltrim(final byte[] key, final long start, final long stop) {
sendCommand(LTRIM, key, toByteArray(start), toByteArray(stop));
}
public void lindex(final byte[] key, final long index) {
sendCommand(LINDEX, key, toByteArray(index));
}
public void lset(final byte[] key, final long index, final byte[] value) {
sendCommand(LSET, key, toByteArray(index), value);
}
public void lrem(final byte[] key, final long count, final byte[] value) {
sendCommand(LREM, key, toByteArray(count), value);
}
public void lpop(final byte[] key) {
sendCommand(LPOP, key);
}
public void rpop(final byte[] key) {
sendCommand(RPOP, key);
}
public void rpoplpush(final byte[] srckey, final byte[] dstkey) {
sendCommand(RPOPLPUSH, srckey, dstkey);
}
public void sadd(final byte[] key, final byte[]... members) {
sendCommand(SADD, joinParameters(key, members));
}
public void smembers(final byte[] key) {
sendCommand(SMEMBERS, key);
}
public void srem(final byte[] key, final byte[]... members) {
sendCommand(SREM, joinParameters(key, members));
}
public void spop(final byte[] key) {
sendCommand(SPOP, key);
}
public void spop(final byte[] key, final long count) {
sendCommand(SPOP, key, toByteArray(count));
}
public void smove(final byte[] srckey, final byte[] dstkey, final byte[] member) {
sendCommand(SMOVE, srckey, dstkey, member);
}
public void scard(final byte[] key) {
sendCommand(SCARD, key);
}
public void sismember(final byte[] key, final byte[] member) {
sendCommand(SISMEMBER, key, member);
}
public void sinter(final byte[]... keys) {
sendCommand(SINTER, keys);
}
public void sinterstore(final byte[] dstkey, final byte[]... keys) {
sendCommand(SINTERSTORE, joinParameters(dstkey, keys));
}
public void sunion(final byte[]... keys) {
sendCommand(SUNION, keys);
}
public void sunionstore(final byte[] dstkey, final byte[]... keys) {
sendCommand(SUNIONSTORE, joinParameters(dstkey, keys));
}
public void sdiff(final byte[]... keys) {
sendCommand(SDIFF, keys);
}
public void sdiffstore(final byte[] dstkey, final byte[]... keys) {
sendCommand(SDIFFSTORE, joinParameters(dstkey, keys));
}
public void srandmember(final byte[] key) {
sendCommand(SRANDMEMBER, key);
}
public void zadd(final byte[] key, final double score, final byte[] member) {
sendCommand(ZADD, key, toByteArray(score), member);
}
public void zadd(final byte[] key, final double score, final byte[] member,
final ZAddParams params) {
sendCommand(ZADD, params.getByteParams(key, toByteArray(score), member));
}
public void zadd(final byte[] key, final Map scoreMembers) {
ArrayList args = new ArrayList<>(scoreMembers.size() * 2 + 1);
args.add(key);
args.addAll(convertScoreMembersToByteArrays(scoreMembers));
byte[][] argsArray = new byte[args.size()][];
args.toArray(argsArray);
sendCommand(ZADD, argsArray);
}
public void zadd(final byte[] key, final Map scoreMembers, final ZAddParams params) {
ArrayList args = convertScoreMembersToByteArrays(scoreMembers);
byte[][] argsArray = new byte[args.size()][];
args.toArray(argsArray);
sendCommand(ZADD, params.getByteParams(key, argsArray));
}
public void zrange(final byte[] key, final long start, final long stop) {
sendCommand(ZRANGE, key, toByteArray(start), toByteArray(stop));
}
public void zrem(final byte[] key, final byte[]... members) {
sendCommand(ZREM, joinParameters(key, members));
}
public void zincrby(final byte[] key, final double increment, final byte[] member) {
sendCommand(ZINCRBY, key, toByteArray(increment), member);
}
public void zincrby(final byte[] key, final double increment, final byte[] member,
final ZIncrByParams params) {
// Note that it actually calls ZADD with INCR option, so it requires Redis 3.0.2 or upper.
sendCommand(ZADD, params.getByteParams(key, toByteArray(increment), member));
}
public void zrank(final byte[] key, final byte[] member) {
sendCommand(ZRANK, key, member);
}
public void zrevrank(final byte[] key, final byte[] member) {
sendCommand(ZREVRANK, key, member);
}
public void zrevrange(final byte[] key, final long start, final long stop) {
sendCommand(ZREVRANGE, key, toByteArray(start), toByteArray(stop));
}
public void zrangeWithScores(final byte[] key, final long start, final long stop) {
sendCommand(ZRANGE, key, toByteArray(start), toByteArray(stop), WITHSCORES.raw);
}
public void zrevrangeWithScores(final byte[] key, final long start, final long stop) {
sendCommand(ZREVRANGE, key, toByteArray(start), toByteArray(stop), WITHSCORES.raw);
}
public void zcard(final byte[] key) {
sendCommand(ZCARD, key);
}
public void zscore(final byte[] key, final byte[] member) {
sendCommand(ZSCORE, key, member);
}
public void zpopmax(final byte[] key) {
sendCommand(ZPOPMAX, key);
}
public void zpopmax(final byte[] key, final int count) {
sendCommand(ZPOPMAX, key, toByteArray(count));
}
public void zpopmin(final byte[] key) {
sendCommand(ZPOPMIN, key);
}
public void zpopmin(final byte[] key, final long count) {
sendCommand(ZPOPMIN, key, toByteArray(count));
}
public void multi() {
sendCommand(MULTI);
isInMulti = true;
}
public void discard() {
sendCommand(DISCARD);
isInMulti = false;
isInWatch = false;
}
public void exec() {
sendCommand(EXEC);
isInMulti = false;
isInWatch = false;
}
public void watch(final byte[]... keys) {
sendCommand(WATCH, keys);
isInWatch = true;
}
public void unwatch() {
sendCommand(UNWATCH);
isInWatch = false;
}
public void sort(final byte[] key) {
sendCommand(SORT, key);
}
public void sort(final byte[] key, final SortingParams sortingParameters) {
final List args = new ArrayList<>();
args.add(key);
args.addAll(sortingParameters.getParams());
sendCommand(SORT, args.toArray(new byte[args.size()][]));
}
public void blpop(final byte[][] args) {
sendCommand(BLPOP, args);
}
public void blpop(final int timeout, final byte[]... keys) {
final List args = new ArrayList<>();
for (final byte[] arg : keys) {
args.add(arg);
}
args.add(Protocol.toByteArray(timeout));
blpop(args.toArray(new byte[args.size()][]));
}
public void sort(final byte[] key, final SortingParams sortingParameters, final byte[] dstkey) {
final List args = new ArrayList<>();
args.add(key);
args.addAll(sortingParameters.getParams());
args.add(STORE.raw);
args.add(dstkey);
sendCommand(SORT, args.toArray(new byte[args.size()][]));
}
public void sort(final byte[] key, final byte[] dstkey) {
sendCommand(SORT, key, STORE.raw, dstkey);
}
public void brpop(final byte[][] args) {
sendCommand(BRPOP, args);
}
public void brpop(final int timeout, final byte[]... keys) {
final List args = new ArrayList<>();
for (final byte[] arg : keys) {
args.add(arg);
}
args.add(Protocol.toByteArray(timeout));
brpop(args.toArray(new byte[args.size()][]));
}
public void auth(final String password) {
setPassword(password);
sendCommand(AUTH, password);
}
public void auth(final String user, final String password) {
setUser(user);
setPassword(password);
sendCommand(AUTH, user, password);
}
public void subscribe(final byte[]... channels) {
sendCommand(SUBSCRIBE, channels);
}
public void publish(final byte[] channel, final byte[] message) {
sendCommand(PUBLISH, channel, message);
}
public void unsubscribe() {
sendCommand(UNSUBSCRIBE);
}
public void unsubscribe(final byte[]... channels) {
sendCommand(UNSUBSCRIBE, channels);
}
public void psubscribe(final byte[]... patterns) {
sendCommand(PSUBSCRIBE, patterns);
}
public void punsubscribe() {
sendCommand(PUNSUBSCRIBE);
}
public void punsubscribe(final byte[]... patterns) {
sendCommand(PUNSUBSCRIBE, patterns);
}
public void pubsub(final byte[]... args) {
sendCommand(PUBSUB, args);
}
public void zcount(final byte[] key, final double min, final double max) {
sendCommand(ZCOUNT, key, toByteArray(min), toByteArray(max));
}
public void zcount(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZCOUNT, key, min, max);
}
public void zrangeByScore(final byte[] key, final double min, final double max) {
sendCommand(ZRANGEBYSCORE, key, toByteArray(min), toByteArray(max));
}
public void zrangeByScore(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZRANGEBYSCORE, key, min, max);
}
public void zrevrangeByScore(final byte[] key, final double max, final double min) {
sendCommand(ZREVRANGEBYSCORE, key, toByteArray(max), toByteArray(min));
}
public void zrevrangeByScore(final byte[] key, final byte[] max, final byte[] min) {
sendCommand(ZREVRANGEBYSCORE, key, max, min);
}
public void zrangeByScore(final byte[] key, final double min, final double max, final int offset,
final int count) {
sendCommand(ZRANGEBYSCORE, key, toByteArray(min), toByteArray(max), LIMIT.raw, toByteArray(offset),
toByteArray(count));
}
public void zrevrangeByScore(final byte[] key, final double max, final double min,
final int offset, final int count) {
sendCommand(ZREVRANGEBYSCORE, key, toByteArray(max), toByteArray(min), LIMIT.raw, toByteArray(offset),
toByteArray(count));
}
public void zrangeByScoreWithScores(final byte[] key, final double min, final double max) {
sendCommand(ZRANGEBYSCORE, key, toByteArray(min), toByteArray(max), WITHSCORES.raw);
}
public void zrevrangeByScoreWithScores(final byte[] key, final double max, final double min) {
sendCommand(ZREVRANGEBYSCORE, key, toByteArray(max), toByteArray(min), WITHSCORES.raw);
}
public void zrangeByScoreWithScores(final byte[] key, final double min, final double max,
final int offset, final int count) {
sendCommand(ZRANGEBYSCORE, key, toByteArray(min), toByteArray(max), LIMIT.raw, toByteArray(offset),
toByteArray(count), WITHSCORES.raw);
}
public void zrevrangeByScoreWithScores(final byte[] key, final double max, final double min,
final int offset, final int count) {
sendCommand(ZREVRANGEBYSCORE, key, toByteArray(max), toByteArray(min), LIMIT.raw, toByteArray(offset),
toByteArray(count), WITHSCORES.raw);
}
public void zrangeByScore(final byte[] key, final byte[] min, final byte[] max, final int offset,
final int count) {
sendCommand(ZRANGEBYSCORE, key, min, max, LIMIT.raw, toByteArray(offset), toByteArray(count));
}
public void zrevrangeByScore(final byte[] key, final byte[] max, final byte[] min,
final int offset, final int count) {
sendCommand(ZREVRANGEBYSCORE, key, max, min, LIMIT.raw, toByteArray(offset), toByteArray(count));
}
public void zrangeByScoreWithScores(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZRANGEBYSCORE, key, min, max, WITHSCORES.raw);
}
public void zrevrangeByScoreWithScores(final byte[] key, final byte[] max, final byte[] min) {
sendCommand(ZREVRANGEBYSCORE, key, max, min, WITHSCORES.raw);
}
public void zrangeByScoreWithScores(final byte[] key, final byte[] min, final byte[] max,
final int offset, final int count) {
sendCommand(ZRANGEBYSCORE, key, min, max, LIMIT.raw, toByteArray(offset), toByteArray(count),
WITHSCORES.raw);
}
public void zrevrangeByScoreWithScores(final byte[] key, final byte[] max, final byte[] min,
final int offset, final int count) {
sendCommand(ZREVRANGEBYSCORE, key, max, min, LIMIT.raw, toByteArray(offset),
toByteArray(count), WITHSCORES.raw);
}
public void zremrangeByRank(final byte[] key, final long start, final long stop) {
sendCommand(ZREMRANGEBYRANK, key, toByteArray(start), toByteArray(stop));
}
public void zremrangeByScore(final byte[] key, final double min, final double max) {
sendCommand(ZREMRANGEBYSCORE, key, toByteArray(min), toByteArray(max));
}
public void zremrangeByScore(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZREMRANGEBYSCORE, key, min, max);
}
public void zunionstore(final byte[] dstkey, final byte[]... sets) {
sendCommand(ZUNIONSTORE, joinParameters(dstkey, toByteArray(sets.length), sets));
}
public void zunionstore(final byte[] dstkey, final ZParams params, final byte[]... sets) {
final List args = new ArrayList<>();
args.add(dstkey);
args.add(Protocol.toByteArray(sets.length));
for (final byte[] set : sets) {
args.add(set);
}
args.addAll(params.getParams());
sendCommand(ZUNIONSTORE, args.toArray(new byte[args.size()][]));
}
public void zinterstore(final byte[] dstkey, final byte[]... sets) {
sendCommand(ZINTERSTORE, joinParameters(dstkey, Protocol.toByteArray(sets.length), sets));
}
public void zinterstore(final byte[] dstkey, final ZParams params, final byte[]... sets) {
final List args = new ArrayList<>();
args.add(dstkey);
args.add(Protocol.toByteArray(sets.length));
for (final byte[] set : sets) {
args.add(set);
}
args.addAll(params.getParams());
sendCommand(ZINTERSTORE, args.toArray(new byte[args.size()][]));
}
public void zlexcount(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZLEXCOUNT, key, min, max);
}
public void zrangeByLex(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZRANGEBYLEX, key, min, max);
}
public void zrangeByLex(final byte[] key, final byte[] min, final byte[] max, final int offset,
final int count) {
sendCommand(ZRANGEBYLEX, key, min, max, LIMIT.raw, toByteArray(offset), toByteArray(count));
}
public void zrevrangeByLex(final byte[] key, final byte[] max, final byte[] min) {
sendCommand(ZREVRANGEBYLEX, key, max, min);
}
public void zrevrangeByLex(final byte[] key, final byte[] max, final byte[] min,
final int offset, final int count) {
sendCommand(ZREVRANGEBYLEX, key, max, min, LIMIT.raw, toByteArray(offset), toByteArray(count));
}
public void zremrangeByLex(final byte[] key, final byte[] min, final byte[] max) {
sendCommand(ZREMRANGEBYLEX, key, min, max);
}
public void save() {
sendCommand(SAVE);
}
public void bgsave() {
sendCommand(BGSAVE);
}
public void bgrewriteaof() {
sendCommand(BGREWRITEAOF);
}
public void lastsave() {
sendCommand(LASTSAVE);
}
public void shutdown() {
sendCommand(SHUTDOWN);
}
public void info() {
sendCommand(INFO);
}
public void info(final String section) {
sendCommand(INFO, section);
}
public void monitor() {
sendCommand(MONITOR);
}
public void slaveof(final String host, final int port) {
sendCommand(SLAVEOF, host, String.valueOf(port));
}
public void slaveofNoOne() {
sendCommand(SLAVEOF, NO.raw, ONE.raw);
}
public void configGet(final byte[] pattern) {
sendCommand(CONFIG, Keyword.GET.raw, pattern);
}
public void configSet(final byte[] parameter, final byte[] value) {
sendCommand(CONFIG, Keyword.SET.raw, parameter, value);
}
public void strlen(final byte[] key) {
sendCommand(STRLEN, key);
}
public void sync() {
sendCommand(SYNC);
}
public void lpushx(final byte[] key, final byte[]... string) {
sendCommand(LPUSHX, joinParameters(key, string));
}
public void persist(final byte[] key) {
sendCommand(PERSIST, key);
}
public void rpushx(final byte[] key, final byte[]... string) {
sendCommand(RPUSHX, joinParameters(key, string));
}
public void echo(final byte[] string) {
sendCommand(ECHO, string);
}
public void linsert(final byte[] key, final ListPosition where, final byte[] pivot,
final byte[] value) {
sendCommand(LINSERT, key, where.raw, pivot, value);
}
public void debug(final DebugParams params) {
sendCommand(DEBUG, params.getCommand());
}
public void brpoplpush(final byte[] source, final byte[] destination, final int timeout) {
sendCommand(BRPOPLPUSH, source, destination, toByteArray(timeout));
}
public void configResetStat() {
sendCommand(CONFIG, Keyword.RESETSTAT.raw);
}
public void configRewrite() {
sendCommand(CONFIG, Keyword.REWRITE.raw);
}
public void setbit(final byte[] key, final long offset, final byte[] value) {
sendCommand(SETBIT, key, toByteArray(offset), value);
}
public void setbit(final byte[] key, final long offset, final boolean value) {
sendCommand(SETBIT, key, toByteArray(offset), toByteArray(value));
}
public void getbit(final byte[] key, final long offset) {
sendCommand(GETBIT, key, toByteArray(offset));
}
public void bitpos(final byte[] key, final boolean value, final BitPosParams params) {
final List args = new ArrayList<>();
args.add(key);
args.add(toByteArray(value));
args.addAll(params.getParams());
sendCommand(BITPOS, args.toArray(new byte[args.size()][]));
}
public void setrange(final byte[] key, final long offset, final byte[] value) {
sendCommand(SETRANGE, key, toByteArray(offset), value);
}
public void getrange(final byte[] key, final long startOffset, final long endOffset) {
sendCommand(GETRANGE, key, toByteArray(startOffset), toByteArray(endOffset));
}
public int getDB() {
return db;
}
@Override
public void disconnect() {
db = 0;
super.disconnect();
}
@Override
public void close() {
db = 0;
super.close();
}
public void resetState() {
if (isInWatch()) {
unwatch();
getStatusCodeReply();
}
}
public void eval(final byte[] script, final byte[] keyCount, final byte[][] params) {
sendCommand(EVAL, joinParameters(script, keyCount, params));
}
public void eval(final byte[] script, final int keyCount, final byte[]... params) {
sendCommand(EVAL, joinParameters(script, toByteArray(keyCount), params));
}
public void evalsha(final byte[] sha1, final byte[] keyCount, final byte[]... params) {
sendCommand(EVALSHA, joinParameters(sha1, keyCount, params));
}
public void evalsha(final byte[] sha1, final int keyCount, final byte[]... params) {
sendCommand(EVALSHA, joinParameters(sha1, toByteArray(keyCount), params));
}
public void scriptFlush() {
sendCommand(SCRIPT, Keyword.FLUSH.raw);
}
public void scriptExists(final byte[]... sha1) {
sendCommand(SCRIPT, joinParameters(Keyword.EXISTS.raw, sha1));
}
public void scriptLoad(final byte[] script) {
sendCommand(SCRIPT, Keyword.LOAD.raw, script);
}
public void scriptKill() {
sendCommand(SCRIPT, Keyword.KILL.raw);
}
public void slowlogGet() {
sendCommand(SLOWLOG, Keyword.GET.raw);
}
public void slowlogGet(final long entries) {
sendCommand(SLOWLOG, Keyword.GET.raw, toByteArray(entries));
}
public void slowlogReset() {
sendCommand(SLOWLOG, RESET.raw);
}
public void slowlogLen() {
sendCommand(SLOWLOG, LEN.raw);
}
public void objectRefcount(final byte[] key) {
sendCommand(OBJECT, REFCOUNT.raw, key);
}
public void objectIdletime(final byte[] key) {
sendCommand(OBJECT, IDLETIME.raw, key);
}
public void objectEncoding(final byte[] key) {
sendCommand(OBJECT, ENCODING.raw, key);
}
public void objectHelp() {
sendCommand(OBJECT, HELP.raw);
}
public void objectFreq(final byte[] key) {
sendCommand(OBJECT, FREQ.raw, key);
}
public void bitcount(final byte[] key) {
sendCommand(BITCOUNT, key);
}
public void bitcount(final byte[] key, final long start, final long end) {
sendCommand(BITCOUNT, key, toByteArray(start), toByteArray(end));
}
public void bitop(final BitOP op, final byte[] destKey, final byte[]... srcKeys) {
sendCommand(BITOP, joinParameters(op.raw, destKey, srcKeys));
}
public void sentinel(final byte[]... args) {
sendCommand(SENTINEL, args);
}
public void dump(final byte[] key) {
sendCommand(DUMP, key);
}
public void restore(final byte[] key, final int ttl, final byte[] serializedValue) {
sendCommand(RESTORE, key, toByteArray(ttl), serializedValue);
}
public void restoreReplace(final byte[] key, final int ttl, final byte[] serializedValue) {
sendCommand(RESTORE, key, toByteArray(ttl), serializedValue, Keyword.REPLACE.raw);
}
public void pexpire(final byte[] key, final long milliseconds) {
sendCommand(PEXPIRE, key, toByteArray(milliseconds));
}
public void pexpireAt(final byte[] key, final long millisecondsTimestamp) {
sendCommand(PEXPIREAT, key, toByteArray(millisecondsTimestamp));
}
public void pttl(final byte[] key) {
sendCommand(PTTL, key);
}
public void psetex(final byte[] key, final long milliseconds, final byte[] value) {
sendCommand(PSETEX, key, toByteArray(milliseconds), value);
}
public void srandmember(final byte[] key, final int count) {
sendCommand(SRANDMEMBER, key, toByteArray(count));
}
public void memoryDoctor() {
sendCommand(MEMORY, Keyword.DOCTOR.raw);
}
public void clientKill(final byte[] ipPort) {
sendCommand(CLIENT, Keyword.KILL.raw, ipPort);
}
public void clientKill(final String ip, final int port) {
sendCommand(CLIENT, Keyword.KILL.name(), ip + ':' + port);
}
public void clientKill(ClientKillParams params) {
sendCommand(CLIENT, joinParameters(Keyword.KILL.raw, params.getByteParams()));
}
public void clientGetname() {
sendCommand(CLIENT, Keyword.GETNAME.raw);
}
public void clientList() {
sendCommand(CLIENT, Keyword.LIST.raw);
}
public void clientSetname(final byte[] name) {
sendCommand(CLIENT, Keyword.SETNAME.raw, name);
}
public void clientPause(final long timeout) {
sendCommand(CLIENT, Keyword.PAUSE.raw, toByteArray(timeout));
}
public void time() {
sendCommand(TIME);
}
public void migrate(final String host, final int port, final byte[] key, final int destinationDb,
final int timeout) {
sendCommand(MIGRATE, SafeEncoder.encode(host), toByteArray(port), key,
toByteArray(destinationDb), toByteArray(timeout));
}
public void migrate(final String host, final int port, final int destinationDB,
final int timeout, final MigrateParams params, final byte[]... keys) {
byte[][] bparams = params.getByteParams();
int len = 5 + bparams.length + 1 + keys.length;
byte[][] args = new byte[len][];
int i = 0;
args[i++] = SafeEncoder.encode(host);
args[i++] = toByteArray(port);
args[i++] = new byte[0];
args[i++] = toByteArray(destinationDB);
args[i++] = toByteArray(timeout);
System.arraycopy(bparams, 0, args, i, bparams.length);
i += bparams.length;
args[i++] = Keyword.KEYS.raw;
System.arraycopy(keys, 0, args, i, keys.length);
sendCommand(MIGRATE, args);
}
public void hincrByFloat(final byte[] key, final byte[] field, final double increment) {
sendCommand(HINCRBYFLOAT, key, field, toByteArray(increment));
}
public void scan(final byte[] cursor, final ScanParams params) {
final List args = new ArrayList<>();
args.add(cursor);
args.addAll(params.getParams());
sendCommand(SCAN, args.toArray(new byte[args.size()][]));
}
public void hscan(final byte[] key, final byte[] cursor, final ScanParams params) {
final List args = new ArrayList<>();
args.add(key);
args.add(cursor);
args.addAll(params.getParams());
sendCommand(HSCAN, args.toArray(new byte[args.size()][]));
}
public void sscan(final byte[] key, final byte[] cursor, final ScanParams params) {
final List args = new ArrayList<>();
args.add(key);
args.add(cursor);
args.addAll(params.getParams());
sendCommand(SSCAN, args.toArray(new byte[args.size()][]));
}
public void zscan(final byte[] key, final byte[] cursor, final ScanParams params) {
final List args = new ArrayList<>();
args.add(key);
args.add(cursor);
args.addAll(params.getParams());
sendCommand(ZSCAN, args.toArray(new byte[args.size()][]));
}
public void waitReplicas(final int replicas, final long timeout) {
sendCommand(WAIT, toByteArray(replicas), toByteArray(timeout));
}
public void cluster(final byte[]... args) {
sendCommand(CLUSTER, args);
}
public void asking() {
sendCommand(ASKING);
}
public void pfadd(final byte[] key, final byte[]... elements) {
sendCommand(PFADD, joinParameters(key, elements));
}
public void pfcount(final byte[] key) {
sendCommand(PFCOUNT, key);
}
public void pfcount(final byte[]... keys) {
sendCommand(PFCOUNT, keys);
}
public void pfmerge(final byte[] destkey, final byte[]... sourcekeys) {
sendCommand(PFMERGE, joinParameters(destkey, sourcekeys));
}
public void readonly() {
sendCommand(READONLY);
}
public void geoadd(final byte[] key, final double longitude, final double latitude, final byte[] member) {
sendCommand(GEOADD, key, toByteArray(longitude), toByteArray(latitude), member);
}
public void geoadd(final byte[] key, final Map memberCoordinateMap) {
List args = new ArrayList<>(memberCoordinateMap.size() * 3 + 1);
args.add(key);
args.addAll(convertGeoCoordinateMapToByteArrays(memberCoordinateMap));
byte[][] argsArray = new byte[args.size()][];
args.toArray(argsArray);
sendCommand(GEOADD, argsArray);
}
public void geodist(final byte[] key, final byte[] member1, final byte[] member2) {
sendCommand(GEODIST, key, member1, member2);
}
public void geodist(final byte[] key, final byte[] member1, final byte[] member2, final GeoUnit unit) {
sendCommand(GEODIST, key, member1, member2, unit.raw);
}
public void geohash(final byte[] key, final byte[]... members) {
sendCommand(GEOHASH, joinParameters(key, members));
}
public void geopos(final byte[] key, final byte[][] members) {
sendCommand(GEOPOS, joinParameters(key, members));
}
public void georadius(final byte[] key, final double longitude, final double latitude, final double radius, final GeoUnit unit) {
sendCommand(GEORADIUS, key, toByteArray(longitude), toByteArray(latitude), toByteArray(radius),
unit.raw);
}
public void georadiusReadonly(final byte[] key, final double longitude, final double latitude, final double radius, final GeoUnit unit) {
sendCommand(GEORADIUS_RO, key, toByteArray(longitude), toByteArray(latitude), toByteArray(radius),
unit.raw);
}
public void georadius(final byte[] key, final double longitude, final double latitude, final double radius, final GeoUnit unit,
final GeoRadiusParam param) {
sendCommand(GEORADIUS, param.getByteParams(key, toByteArray(longitude), toByteArray(latitude),
toByteArray(radius), unit.raw));
}
public void georadiusReadonly(final byte[] key, final double longitude, final double latitude, final double radius, final GeoUnit unit,
final GeoRadiusParam param) {
sendCommand(GEORADIUS_RO, param.getByteParams(key, toByteArray(longitude), toByteArray(latitude),
toByteArray(radius), unit.raw));
}
public void georadiusByMember(final byte[] key, final byte[] member, final double radius, final GeoUnit unit) {
sendCommand(GEORADIUSBYMEMBER, key, member, toByteArray(radius), unit.raw);
}
public void georadiusByMemberReadonly(final byte[] key, final byte[] member, final double radius, final GeoUnit unit) {
sendCommand(GEORADIUSBYMEMBER_RO, key, member, toByteArray(radius), unit.raw);
}
public void georadiusByMember(final byte[] key, final byte[] member, final double radius, final GeoUnit unit,
final GeoRadiusParam param) {
sendCommand(GEORADIUSBYMEMBER, param.getByteParams(key, member, toByteArray(radius), unit.raw));
}
public void georadiusByMemberReadonly(final byte[] key, final byte[] member, final double radius, final GeoUnit unit,
final GeoRadiusParam param) {
sendCommand(GEORADIUSBYMEMBER_RO, param.getByteParams(key, member, toByteArray(radius), unit.raw));
}
public void moduleLoad(final byte[] path) {
sendCommand(MODULE, Keyword.LOAD.raw, path);
}
public void moduleList() {
sendCommand(MODULE, Keyword.LIST.raw);
}
public void moduleUnload(final byte[] name) {
sendCommand(MODULE, Keyword.UNLOAD.raw, name);
}
private ArrayList convertScoreMembersToByteArrays(final Map scoreMembers) {
ArrayList args = new ArrayList<>(scoreMembers.size() * 2);
for (Entry entry : scoreMembers.entrySet()) {
args.add(toByteArray(entry.getValue()));
args.add(entry.getKey());
}
return args;
}
public void aclWhoAmI() { sendCommand(ACL, Keyword.WHOAMI.raw); }
public void aclGenPass() { sendCommand(ACL, Keyword.GENPASS.raw); }
public void aclList() { sendCommand(ACL, Keyword.LIST.raw); }
public void aclUsers() { sendCommand(ACL, Keyword.USERS.raw); }
public void aclCat() { sendCommand(ACL, Keyword.CAT.raw); }
public void aclCat(final byte[] category) {
sendCommand(ACL, Keyword.CAT.raw, category);
}
public void aclSetUser(final byte[] name) {
sendCommand(ACL, Keyword.SETUSER.raw, name);
}
public void aclGetUser(final byte[] name) {
sendCommand(ACL, Keyword.GETUSER.raw, name);
}
public void aclSetUser(final byte[] name, byte[][] parameters) {
sendCommand(ACL, joinParameters(Keyword.SETUSER.raw,name, parameters));
}
public void aclDelUser(final byte[] name) {
sendCommand(ACL, Keyword.DELUSER.raw, name);
}
private List convertGeoCoordinateMapToByteArrays(
final Map memberCoordinateMap) {
List args = new ArrayList<>(memberCoordinateMap.size() * 3);
for (Entry entry : memberCoordinateMap.entrySet()) {
GeoCoordinate coordinate = entry.getValue();
args.add(toByteArray(coordinate.getLongitude()));
args.add(toByteArray(coordinate.getLatitude()));
args.add(entry.getKey());
}
return args;
}
public void bitfield(final byte[] key, final byte[]... value) {
sendCommand(BITFIELD, joinParameters(key, value));
}
public void bitfieldReadonly(final byte[] key, final byte[]... arguments) {
sendCommand(BITFIELD_RO, joinParameters(key, arguments));
}
public void hstrlen(final byte[] key, final byte[] field) {
sendCommand(HSTRLEN, key, field);
}
public void xadd(final byte[] key, final byte[] id, final Map hash, long maxLen, boolean approximateLength) {
int maxLexArgs = 0;
if(maxLen < Long.MAX_VALUE) { // optional arguments
if(approximateLength) {
maxLexArgs = 3; // e.g. MAXLEN ~ 1000
} else {
maxLexArgs = 2; // e.g. MAXLEN 1000
}
}
final byte[][] params = new byte[2 + maxLexArgs + hash.size() * 2][];
int index = 0;
params[index++] = key;
if(maxLen < Long.MAX_VALUE) {
params[index++] = Keyword.MAXLEN.raw;
if(approximateLength) {
params[index++] = Protocol.BYTES_TILDE;
}
params[index++] = toByteArray(maxLen);
}
params[index++] = id;
for (final Entry entry : hash.entrySet()) {
params[index++] = entry.getKey();
params[index++] = entry.getValue();
}
sendCommand(XADD, params);
}
public void xlen(final byte[] key) {
sendCommand(XLEN, key);
}
public void xrange(final byte[] key, final byte[] start, final byte[] end, final long count) {
sendCommand(XRANGE, key, start, end, Keyword.COUNT.raw, toByteArray(count));
}
public void xrevrange(final byte[] key, final byte[] end, final byte[] start, final int count) {
sendCommand(XREVRANGE, key, end, start, Keyword.COUNT.raw, toByteArray(count));
}
public void xread(final int count, final long block, final Map streams) {
final byte[][] params = new byte[3 + streams.size() * 2 + (block > 0 ? 2 : 0)][];
int streamsIndex = 0;
params[streamsIndex++] = Keyword.COUNT.raw;
params[streamsIndex++] = toByteArray(count);
if(block > 0) {
params[streamsIndex++] = Keyword.BLOCK.raw;
params[streamsIndex++] = toByteArray(block);
}
params[streamsIndex++] = Keyword.STREAMS.raw;
int idsIndex = streamsIndex + streams.size();
for (final Entry entry : streams.entrySet()) {
params[streamsIndex++] = entry.getKey();
params[idsIndex++] = entry.getValue();
}
sendCommand(XREAD, params);
}
public void xack(final byte[] key, final byte[] group, final byte[]... ids) {
final byte[][] params = new byte[2 + ids.length][];
int index = 0;
params[index++] = key;
params[index++] = group;
for (final byte[] id : ids) {
params[index++] = id;
}
sendCommand(XACK, params);
}
public void xgroupCreate(final byte[] key, final byte[] groupname, final byte[] id, boolean makeStream) {
if(makeStream) {
sendCommand(XGROUP, Keyword.CREATE.raw, key, groupname, id, Keyword.MKSTREAM.raw);
} else {
sendCommand(XGROUP, Keyword.CREATE.raw, key, groupname, id);
}
}
public void xgroupSetID(final byte[] key, final byte[] groupname, final byte[] id) {
sendCommand(XGROUP, Keyword.SETID.raw, key, groupname, id);
}
public void xgroupDestroy(final byte[] key, final byte[] groupname) {
sendCommand(XGROUP, Keyword.DESTROY.raw, key, groupname);
}
public void xgroupDelConsumer(final byte[] key, final byte[] groupname, final byte[] consumerName) {
sendCommand(XGROUP, Keyword.DELCONSUMER.raw, key, groupname, consumerName);
}
public void xdel(final byte[] key, final byte[]... ids) {
final byte[][] params = new byte[1 + ids.length][];
int index = 0;
params[index++] = key;
for (final byte[] id : ids) {
params[index++] = id;
}
sendCommand(XDEL, params);
}
public void xtrim(byte[] key, long maxLen, boolean approximateLength) {
if(approximateLength) {
sendCommand(XTRIM, key, Keyword.MAXLEN.raw, Protocol.BYTES_TILDE ,toByteArray(maxLen));
} else {
sendCommand(XTRIM, key, Keyword.MAXLEN.raw, toByteArray(maxLen));
}
}
public void xreadGroup(byte[] groupname, byte[] consumer, int count, long block, boolean noAck, Map streams) {
int optional = 0;
if(count>0) {
optional += 2;
}
if(block > 0) {
optional += 2;
}
if(noAck) {
optional += 1;
}
final byte[][] params = new byte[4 + optional + streams.size() * 2][];
int streamsIndex = 0;
params[streamsIndex++] = Keyword.GROUP.raw;
params[streamsIndex++] = groupname;
params[streamsIndex++] = consumer;
if(count>0) {
params[streamsIndex++] = Keyword.COUNT.raw;
params[streamsIndex++] = toByteArray(count);
}
if(block > 0) {
params[streamsIndex++] = Keyword.BLOCK.raw;
params[streamsIndex++] = toByteArray(block);
}
if(noAck) {
params[streamsIndex++] = Keyword.NOACK.raw;
}
params[streamsIndex++] = Keyword.STREAMS.raw;
int idsIndex = streamsIndex + streams.size();
for (final Entry entry : streams.entrySet()) {
params[streamsIndex++] = entry.getKey();
params[idsIndex++] = entry.getValue();
}
sendCommand(XREADGROUP, params);
}
public void xpending(byte[] key, byte[] groupname, byte[] start, byte[] end, int count, byte[] consumername) {
if(consumername == null) {
sendCommand(XPENDING, key, groupname, start, end, toByteArray(count));
} else {
sendCommand(XPENDING, key, groupname, start, end, toByteArray(count), consumername);
}
}
public void xclaim(byte[] key, byte[] groupname, byte[] consumername, long minIdleTime, long newIdleTime, int retries, boolean force, byte[][] ids) {
ArrayList arguments = new ArrayList<>(10 + ids.length);
arguments.add(key);
arguments.add(groupname);
arguments.add(consumername);
arguments.add(toByteArray(minIdleTime));
for(byte[] id : ids) {
arguments.add(id);
}
if(newIdleTime > 0) {
arguments.add(Keyword.IDLE.raw);
arguments.add(toByteArray(newIdleTime));
}
if(retries > 0) {
arguments.add(Keyword.RETRYCOUNT.raw);
arguments.add(toByteArray(retries));
}
if(force) {
arguments.add(Keyword.FORCE.raw);
}
sendCommand(XCLAIM, arguments.toArray(new byte[arguments.size()][]));
}
public void xinfoStream(byte[] key) {
sendCommand(XINFO,Keyword.STREAM.raw,key);
}
public void xinfoGroup(byte[] key) {
sendCommand(XINFO,Keyword.GROUPS.raw,key);
}
public void xinfoConsumers (byte[] key, byte[] group) {
sendCommand(XINFO,Keyword.CONSUMERS.raw,key,group);
}
}
springboot通过用户名连接redis-cluster redis7，
连接配置如下
spring:
redis:
cluster:
# 集群节点
nodes: 172.4.2.65:30001,172.4.2.65:30002,172.4.2.65:30003,172.4.2.65:30004,172.4.2.65:30005,172.4.2.65:30006
# 最大重定向次数
max-redirects: 5
# 密码
user: test
password: test@123多覆盖一个文件
新建包目录 redis.clients.jedis
新建类BinaryJedis.java
package redis.clients.jedis;
import static redis.clients.jedis.Protocol.toByteArray;
import java.io.Closeable;
import java.io.Serializable;
import java.net.URI;
import java.util.AbstractMap;
import java.util.AbstractSet;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Collections;
import java.util.Iterator;
import java.util.LinkedHashSet;
import java.util.List;
import java.util.Map;
import java.util.Set;
import javax.net.ssl.HostnameVerifier;
import javax.net.ssl.SSLParameters;
import javax.net.ssl.SSLSocketFactory;
import org.apache.commons.lang3.StringUtils;
import redis.clients.jedis.commands.AdvancedBinaryJedisCommands;
import redis.clients.jedis.commands.BasicCommands;
import redis.clients.jedis.commands.BinaryJedisCommands;
import redis.clients.jedis.commands.BinaryScriptingCommands;
import redis.clients.jedis.commands.MultiKeyBinaryCommands;
import redis.clients.jedis.commands.ProtocolCommand;
import redis.clients.jedis.exceptions.InvalidURIException;
import redis.clients.jedis.exceptions.JedisDataException;
import redis.clients.jedis.exceptions.JedisException;
import redis.clients.jedis.params.ClientKillParams;
import redis.clients.jedis.params.GeoRadiusParam;
import redis.clients.jedis.params.MigrateParams;
import redis.clients.jedis.params.SetParams;
import redis.clients.jedis.params.ZAddParams;
import redis.clients.jedis.params.ZIncrByParams;
import redis.clients.jedis.util.JedisByteHashMap;
import redis.clients.jedis.util.JedisURIHelper;
public class BinaryJedis implements BasicCommands, BinaryJedisCommands, MultiKeyBinaryCommands,
AdvancedBinaryJedisCommands, BinaryScriptingCommands, Closeable {
protected Client client = null;
protected Transaction transaction = null;
protected Pipeline pipeline = null;
private final byte[][] dummyArray = new byte[0][];
private String user;
{
String user = SpringUtils.getApplicationContext().getEnvironment().getProperty("spring.redis.user");
if(StringUtils.isNotBlank(user)){
this.user = user;
}
}
public BinaryJedis() {
client = new Client();
}
public BinaryJedis(final String host) {
URI uri = URI.create(host);
if (JedisURIHelper.isValid(uri)) {
initializeClientFromURI(uri);
} else {
client = new Client(host);
}
}
public BinaryJedis(final HostAndPort hp) {
this(hp.getHost(), hp.getPort());
}
public BinaryJedis(final String host, final int port) {
client = new Client(host, port);
}
public BinaryJedis(final String host, final int port, final boolean ssl) {
client = new Client(host, port, ssl);
}
public BinaryJedis(final String host, final int port, final boolean ssl,
final SSLSocketFactory sslSocketFactory, final SSLParameters sslParameters,
final HostnameVerifier hostnameVerifier) {
client = new Client(host, port, ssl, sslSocketFactory, sslParameters, hostnameVerifier);
}
public BinaryJedis(final String host, final int port, final int timeout) {
this(host, port, timeout, timeout);
}
public BinaryJedis(final String host, final int port, final int timeout, final boolean ssl) {
this(host, port, timeout, timeout, ssl);
}
public BinaryJedis(final String host, final int port, final int timeout, final boolean ssl,
final SSLSocketFactory sslSocketFactory, final SSLParameters sslParameters,
final HostnameVerifier hostnameVerifier) {
this(host, port, timeout, timeout, ssl, sslSocketFactory, sslParameters, hostnameVerifier);
}
public BinaryJedis(final String host, final int port, final int connectionTimeout,
final int soTimeout) {
client = new Client(host, port);
client.setConnectionTimeout(connectionTimeout);
client.setSoTimeout(soTimeout);
}
public BinaryJedis(final String host, final int port, final int connectionTimeout,
final int soTimeout, final boolean ssl) {
client = new Client(host, port, ssl);
client.setConnectionTimeout(connectionTimeout);
client.setSoTimeout(soTimeout);
}
public BinaryJedis(final String host, final int port, final int connectionTimeout,
final int soTimeout, final boolean ssl, final SSLSocketFactory sslSocketFactory,
final SSLParameters sslParameters, final HostnameVerifier hostnameVerifier) {
client = new Client(host, port, ssl, sslSocketFactory, sslParameters, hostnameVerifier);
client.setConnectionTimeout(connectionTimeout);
client.setSoTimeout(soTimeout);
}
public BinaryJedis(final JedisShardInfo shardInfo) {
client = new Client(shardInfo.getHost(), shardInfo.getPort(), shardInfo.getSsl(),
shardInfo.getSslSocketFactory(), shardInfo.getSslParameters(),
shardInfo.getHostnameVerifier());
client.setConnectionTimeout(shardInfo.getConnectionTimeout());
client.setSoTimeout(shardInfo.getSoTimeout());
client.setUser(shardInfo.getUser());
client.setPassword(shardInfo.getPassword());
client.setDb(shardInfo.getDb());
}
public BinaryJedis(URI uri) {
initializeClientFromURI(uri);
}
public BinaryJedis(URI uri, final SSLSocketFactory sslSocketFactory,
final SSLParameters sslParameters, final HostnameVerifier hostnameVerifier) {
initializeClientFromURI(uri, sslSocketFactory, sslParameters, hostnameVerifier);
}
public BinaryJedis(final URI uri, final int timeout) {
this(uri, timeout, timeout);
}
public BinaryJedis(final URI uri, final int timeout, final SSLSocketFactory sslSocketFactory,
final SSLParameters sslParameters, final HostnameVerifier hostnameVerifier) {
this(uri, timeout, timeout, sslSocketFactory, sslParameters, hostnameVerifier);
}
public BinaryJedis(final URI uri, final int connectionTimeout, final int soTimeout) {
initializeClientFromURI(uri);
client.setConnectionTimeout(connectionTimeout);
client.setSoTimeout(soTimeout);
}
public BinaryJedis(final URI uri, final int connectionTimeout, final int soTimeout,
final SSLSocketFactory sslSocketFactory,final SSLParameters sslParameters,
final HostnameVerifier hostnameVerifier) {
initializeClientFromURI(uri, sslSocketFactory, sslParameters, hostnameVerifier);
client.setConnectionTimeout(connectionTimeout);
client.setSoTimeout(soTimeout);
}
public BinaryJedis(final JedisSocketFactory jedisSocketFactory) {
client = new Client(jedisSocketFactory);
}
private void initializeClientFromURI(URI uri) {
initializeClientFromURI(uri, null, null, null);
}
private void initializeClientFromURI(URI uri, final SSLSocketFactory sslSocketFactory,
final SSLParameters sslParameters, final HostnameVerifier hostnameVerifier) {
if (!JedisURIHelper.isValid(uri)) {
throw new InvalidURIException(String.format(
"Cannot open Redis connection due invalid URI. %s", uri.toString()));
}
client = new Client(uri.getHost(), uri.getPort(), JedisURIHelper.isRedisSSLScheme(uri),
sslSocketFactory, sslParameters, hostnameVerifier);
String password = JedisURIHelper.getPassword(uri);
if (password != null) {
String user = JedisURIHelper.getUser(uri);
if (user == null) {
client.auth(password);
} else {
client.auth(user, password);
}
client.getStatusCodeReply();
}
int dbIndex = JedisURIHelper.getDBIndex(uri);
if (dbIndex > 0) {
client.select(dbIndex);
client.getStatusCodeReply();
client.setDb(dbIndex);
}
}
@Override
public String ping() {
checkIsInMultiOrPipeline();
client.ping();
return client.getStatusCodeReply();
}
/**
* Works same as ping() but returns argument message instead of PONG.
* @param message
* @return message
*/
public byte[] ping(final byte[] message) {
checkIsInMultiOrPipeline();
client.ping(message);
return client.getBinaryBulkReply();
}
/**
* Set the string value as value of the key. The string can't be longer than 1073741824 bytes (1
* GB).
*
* Time complexity: O(1)
* @param key
* @param value
* @return Status code reply
*/
@Override
public String set(final byte[] key, final byte[] value) {
checkIsInMultiOrPipeline();
client.set(key, value);
return client.getStatusCodeReply();
}
/**
* Set the string value as value of the key. The string can't be longer than 1073741824 bytes (1
* GB).
* @param key
* @param value
* @param params
* @return Status code reply
*/
@Override
public String set(final byte[] key, final byte[] value, final SetParams params) {
checkIsInMultiOrPipeline();
client.set(key, value, params);
return client.getStatusCodeReply();
}
/**
* Get the value of the specified key. If the key does not exist the special value 'nil' is
* returned. If the value stored at key is not a string an error is returned because GET can only
* handle string values.
*
* Time complexity: O(1)
* @param key
* @return Bulk reply
*/
@Override
public byte[] get(final byte[] key) {
checkIsInMultiOrPipeline();
client.get(key);
return client.getBinaryBulkReply();
}
/**
* Ask the server to silently close the connection.
*/
@Override
public String quit() {
checkIsInMultiOrPipeline();
client.quit();
String quitReturn = client.getStatusCodeReply();
client.disconnect();
return quitReturn;
}
/**
* Test if the specified keys exist. The command returns the number of keys exist.
* Time complexity: O(N)
* @param keys
* @return Integer reply, specifically: an integer greater than 0 if one or more keys exist,
* 0 if none of the specified keys exist.
*/
@Override
public Long exists(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.exists(keys);
return client.getIntegerReply();
}
/**
* Test if the specified key exists. The command returns true if the key exists, otherwise false is
* returned. Note that even keys set with an empty string as value will return true. Time
* complexity: O(1)
* @param key
* @return Boolean reply, true if the key exists, otherwise false
*/
@Override
public Boolean exists(final byte[] key) {
checkIsInMultiOrPipeline();
client.exists(key);
return client.getIntegerReply() == 1;
}
/**
* Remove the specified keys. If a given key does not exist no operation is performed for this
* key. The command returns the number of keys removed. Time complexity: O(1)
* @param keys
* @return Integer reply, specifically: an integer greater than 0 if one or more keys were removed
* 0 if none of the specified key existed
*/
@Override
public Long del(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.del(keys);
return client.getIntegerReply();
}
@Override
public Long del(final byte[] key) {
checkIsInMultiOrPipeline();
client.del(key);
return client.getIntegerReply();
}
/**
* This command is very similar to DEL: it removes the specified keys. Just like DEL a key is
* ignored if it does not exist. However the command performs the actual memory reclaiming in a
* different thread, so it is not blocking, while DEL is. This is where the command name comes
* from: the command just unlinks the keys from the keyspace. The actual removal will happen later
* asynchronously.
*
* Time complexity: O(1) for each key removed regardless of its size. Then the command does O(N)
* work in a different thread in order to reclaim memory, where N is the number of allocations the
* deleted objects where composed of.
* @param keys
* @return Integer reply: The number of keys that were unlinked
*/
@Override
public Long unlink(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.unlink(keys);
return client.getIntegerReply();
}
@Override
public Long unlink(final byte[] key) {
checkIsInMultiOrPipeline();
client.unlink(key);
return client.getIntegerReply();
}
/**
* Return the type of the value stored at key in form of a string. The type can be one of "none",
* "string", "list", "set". "none" is returned if the key does not exist. Time complexity: O(1)
* @param key
* @return Status code reply, specifically: "none" if the key does not exist "string" if the key
* contains a String value "list" if the key contains a List value "set" if the key
* contains a Set value "zset" if the key contains a Sorted Set value "hash" if the key
* contains a Hash value
*/
@Override
public String type(final byte[] key) {
checkIsInMultiOrPipeline();
client.type(key);
return client.getStatusCodeReply();
}
/**
* Delete all the keys of the currently selected DB. This command never fails.
* @return Status code reply
*/
@Override
public String flushDB() {
checkIsInMultiOrPipeline();
client.flushDB();
return client.getStatusCodeReply();
}
/**
* Returns all the keys matching the glob-style pattern as space separated strings. For example if
* you have in the database the keys "foo" and "foobar" the command "KEYS foo*" will return
* "foo foobar".
*
* Note that while the time complexity for this operation is O(n) the constant times are pretty
* low. For example Redis running on an entry level laptop can scan a 1 million keys database in
* 40 milliseconds. Still it's better to consider this one of the slow commands that may ruin
* the DB performance if not used with care.
*
* In other words this command is intended only for debugging and special operations like creating
* a script to change the DB schema. Don't use it in your normal code. Use Redis Sets in order to
* group together a subset of objects.
*
* Glob style patterns examples:
*
* - h?llo will match hello hallo hhllo
*
- h*llo will match hllo heeeello
*
- h[ae]llo will match hello and hallo, but not hillo
*
*
* Use \ to escape special chars if you want to match them verbatim.
*
* Time complexity: O(n) (with n being the number of keys in the DB, and assuming keys and pattern
* of limited length)
* @param pattern
* @return Multi bulk reply
*/
@Override
public Set keys(final byte[] pattern) {
checkIsInMultiOrPipeline();
client.keys(pattern);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Return a randomly selected key from the currently selected DB.
*
* Time complexity: O(1)
* @return Single line reply, specifically the randomly selected key or an empty string is the
* database is empty
*/
@Override
public byte[] randomBinaryKey() {
checkIsInMultiOrPipeline();
client.randomKey();
return client.getBinaryBulkReply();
}
/**
* Atomically renames the key oldkey to newkey. If the source and destination name are the same an
* error is returned. If newkey already exists it is overwritten.
*
* Time complexity: O(1)
* @param oldkey
* @param newkey
* @return Status code repy
*/
@Override
public String rename(final byte[] oldkey, final byte[] newkey) {
checkIsInMultiOrPipeline();
client.rename(oldkey, newkey);
return client.getStatusCodeReply();
}
/**
* Rename oldkey into newkey but fails if the destination key newkey already exists.
*
* Time complexity: O(1)
* @param oldkey
* @param newkey
* @return Integer reply, specifically: 1 if the key was renamed 0 if the target key already exist
*/
@Override
public Long renamenx(final byte[] oldkey, final byte[] newkey) {
checkIsInMultiOrPipeline();
client.renamenx(oldkey, newkey);
return client.getIntegerReply();
}
/**
* Return the number of keys in the currently selected database.
* @return Integer reply
*/
@Override
public Long dbSize() {
checkIsInMultiOrPipeline();
client.dbSize();
return client.getIntegerReply();
}
/**
* Set a timeout on the specified key. After the timeout the key will be automatically deleted by
* the server. A key with an associated timeout is said to be volatile in Redis terminology.
*
* Volatile keys are stored on disk like the other keys, the timeout is persistent too like all the
* other aspects of the dataset. Saving a dataset containing expires and stopping the server does
* not stop the flow of time as Redis stores on disk the time when the key will no longer be
* available as Unix time, and not the remaining seconds.
*
* Since Redis 2.1.3 you can update the value of the timeout of a key already having an expire
* set. It is also possible to undo the expire at all turning the key into a normal key using the
* {@link #persist(byte[]) PERSIST} command.
*
* Time complexity: O(1)
* @see Expire Command
* @param key
* @param seconds
* @return Integer reply, specifically: 1: the timeout was set. 0: the timeout was not set since
* the key already has an associated timeout (this may happen only in Redis versions <
* 2.1.3, Redis >= 2.1.3 will happily update the timeout), or the key does not exist.
*/
@Override
public Long expire(final byte[] key, final int seconds) {
checkIsInMultiOrPipeline();
client.expire(key, seconds);
return client.getIntegerReply();
}
/**
* EXPIREAT works exactly like {@link #expire(byte[], int) EXPIRE} but instead to get the number of
* seconds representing the Time To Live of the key as a second argument (that is a relative way
* of specifying the TTL), it takes an absolute one in the form of a UNIX timestamp (Number of
* seconds elapsed since 1 Gen 1970).
*
* EXPIREAT was introduced in order to implement the Append Only File persistence mode so that
* EXPIRE commands are automatically translated into EXPIREAT commands for the append only file.
* Of course EXPIREAT can also used by programmers that need a way to simply specify that a given
* key should expire at a given time in the future.
*
* Since Redis 2.1.3 you can update the value of the timeout of a key already having an expire
* set. It is also possible to undo the expire at all turning the key into a normal key using the
* {@link #persist(byte[]) PERSIST} command.
*
* Time complexity: O(1)
* @see Expire Command
* @param key
* @param unixTime
* @return Integer reply, specifically: 1: the timeout was set. 0: the timeout was not set since
* the key already has an associated timeout (this may happen only in Redis versions <
* 2.1.3, Redis >= 2.1.3 will happily update the timeout), or the key does not exist.
*/
@Override
public Long expireAt(final byte[] key, final long unixTime) {
checkIsInMultiOrPipeline();
client.expireAt(key, unixTime);
return client.getIntegerReply();
}
/**
* The TTL command returns the remaining time to live in seconds of a key that has an
* {@link #expire(byte[], int) EXPIRE} set. This introspection capability allows a Redis client to
* check how many seconds a given key will continue to be part of the dataset.
* @param key
* @return Integer reply, returns the remaining time to live in seconds of a key that has an
* EXPIRE. If the Key does not exists or does not have an associated expire, -1 is
* returned.
*/
@Override
public Long ttl(final byte[] key) {
checkIsInMultiOrPipeline();
client.ttl(key);
return client.getIntegerReply();
}
/**
* Alters the last access time of a key(s). A key is ignored if it does not exist.
* Time complexity: O(N) where N is the number of keys that will be touched.
* @param keys
* @return Integer reply: The number of keys that were touched.
*/
@Override
public Long touch(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.touch(keys);
return client.getIntegerReply();
}
@Override
public Long touch(final byte[] key) {
checkIsInMultiOrPipeline();
client.touch(key);
return client.getIntegerReply();
}
/**
* Select the DB with having the specified zero-based numeric index. For default every new client
* connection is automatically selected to DB 0.
* @param index
* @return Status code reply
*/
@Override
public String select(final int index) {
checkIsInMultiOrPipeline();
client.select(index);
String statusCodeReply = client.getStatusCodeReply();
client.setDb(index);
return statusCodeReply;
}
@Override
public String swapDB(final int index1, final int index2) {
checkIsInMultiOrPipeline();
client.swapDB(index1, index2);
return client.getStatusCodeReply();
}
/**
* Move the specified key from the currently selected DB to the specified destination DB. Note
* that this command returns 1 only if the key was successfully moved, and 0 if the target key was
* already there or if the source key was not found at all, so it is possible to use MOVE as a
* locking primitive.
* @param key
* @param dbIndex
* @return Integer reply, specifically: 1 if the key was moved 0 if the key was not moved because
* already present on the target DB or was not found in the current DB.
*/
@Override
public Long move(final byte[] key, final int dbIndex) {
checkIsInMultiOrPipeline();
client.move(key, dbIndex);
return client.getIntegerReply();
}
/**
* Delete all the keys of all the existing databases, not just the currently selected one. This
* command never fails.
* @return Status code reply
*/
@Override
public String flushAll() {
checkIsInMultiOrPipeline();
client.flushAll();
return client.getStatusCodeReply();
}
/**
* GETSET is an atomic set this value and return the old value command. Set key to the string
* value and return the old value stored at key. The string can't be longer than 1073741824 bytes
* (1 GB).
*
* Time complexity: O(1)
* @param key
* @param value
* @return Bulk reply
*/
@Override
public byte[] getSet(final byte[] key, final byte[] value) {
checkIsInMultiOrPipeline();
client.getSet(key, value);
return client.getBinaryBulkReply();
}
/**
* Get the values of all the specified keys. If one or more keys don't exist or is not of type
* String, a 'nil' value is returned instead of the value of the specified key, but the operation
* never fails.
*
* Time complexity: O(1) for every key
* @param keys
* @return Multi bulk reply
*/
@Override
public List mget(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.mget(keys);
return client.getBinaryMultiBulkReply();
}
/**
* SETNX works exactly like {@link #set(byte[], byte[]) SET} with the only difference that if the
* key already exists no operation is performed. SETNX actually means "SET if Not eXists".
*
* Time complexity: O(1)
* @param key
* @param value
* @return Integer reply, specifically: 1 if the key was set 0 if the key was not set
*/
@Override
public Long setnx(final byte[] key, final byte[] value) {
checkIsInMultiOrPipeline();
client.setnx(key, value);
return client.getIntegerReply();
}
/**
* The command is exactly equivalent to the following group of commands:
* {@link #set(byte[], byte[]) SET} + {@link #expire(byte[], int) EXPIRE}. The operation is
* atomic.
*
* Time complexity: O(1)
* @param key
* @param seconds
* @param value
* @return Status code reply
*/
@Override
public String setex(final byte[] key, final int seconds, final byte[] value) {
checkIsInMultiOrPipeline();
client.setex(key, seconds, value);
return client.getStatusCodeReply();
}
/**
* Set the the respective keys to the respective values. MSET will replace old values with new
* values, while {@link #msetnx(byte[]...) MSETNX} will not perform any operation at all even if
* just a single key already exists.
*
* Because of this semantic MSETNX can be used in order to set different keys representing
* different fields of an unique logic object in a way that ensures that either all the fields or
* none at all are set.
*
* Both MSET and MSETNX are atomic operations. This means that for instance if the keys A and B
* are modified, another client talking to Redis can either see the changes to both A and B at
* once, or no modification at all.
* @see #msetnx(byte[]...)
* @param keysvalues
* @return Status code reply Basically +OK as MSET can't fail
*/
@Override
public String mset(final byte[]... keysvalues) {
checkIsInMultiOrPipeline();
client.mset(keysvalues);
return client.getStatusCodeReply();
}
/**
* Set the the respective keys to the respective values. {@link #mset(byte[]...) MSET} will
* replace old values with new values, while MSETNX will not perform any operation at all even if
* just a single key already exists.
*
* Because of this semantic MSETNX can be used in order to set different keys representing
* different fields of an unique logic object in a way that ensures that either all the fields or
* none at all are set.
*
* Both MSET and MSETNX are atomic operations. This means that for instance if the keys A and B
* are modified, another client talking to Redis can either see the changes to both A and B at
* once, or no modification at all.
* @see #mset(byte[]...)
* @param keysvalues
* @return Integer reply, specifically: 1 if the all the keys were set 0 if no key was set (at
* least one key already existed)
*/
@Override
public Long msetnx(final byte[]... keysvalues) {
checkIsInMultiOrPipeline();
client.msetnx(keysvalues);
return client.getIntegerReply();
}
/**
* DECRBY work just like {@link #decr(byte[]) INCR} but instead to decrement by 1 the decrement is
* integer.
*
* INCR commands are limited to 64 bit signed integers.
*
* Note: this is actually a string operation, that is, in Redis there are not "integer" types.
* Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented,
* and then converted back as a string.
*
* Time complexity: O(1)
* @see #incr(byte[])
* @see #decr(byte[])
* @see #incrBy(byte[], long)
* @param key
* @param decrement
* @return Integer reply, this commands will reply with the new value of key after the increment.
*/
@Override
public Long decrBy(final byte[] key, final long decrement) {
checkIsInMultiOrPipeline();
client.decrBy(key, decrement);
return client.getIntegerReply();
}
/**
* Decrement the number stored at key by one. If the key does not exist or contains a value of a
* wrong type, set the key to the value of "0" before to perform the decrement operation.
*
* INCR commands are limited to 64 bit signed integers.
*
* Note: this is actually a string operation, that is, in Redis there are not "integer" types.
* Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented,
* and then converted back as a string.
*
* Time complexity: O(1)
* @see #incr(byte[])
* @see #incrBy(byte[], long)
* @see #decrBy(byte[], long)
* @param key
* @return Integer reply, this commands will reply with the new value of key after the increment.
*/
@Override
public Long decr(final byte[] key) {
checkIsInMultiOrPipeline();
client.decr(key);
return client.getIntegerReply();
}
/**
* INCRBY work just like {@link #incr(byte[]) INCR} but instead to increment by 1 the increment is
* integer.
*
* INCR commands are limited to 64 bit signed integers.
*
* Note: this is actually a string operation, that is, in Redis there are not "integer" types.
* Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented,
* and then converted back as a string.
*
* Time complexity: O(1)
* @see #incr(byte[])
* @see #decr(byte[])
* @see #decrBy(byte[], long)
* @param key
* @param increment
* @return Integer reply, this commands will reply with the new value of key after the increment.
*/
@Override
public Long incrBy(final byte[] key, final long increment) {
checkIsInMultiOrPipeline();
client.incrBy(key, increment);
return client.getIntegerReply();
}
/**
* INCRBYFLOAT work just like {@link #incrBy(byte[], long)} INCRBY} but increments by floats
* instead of integers.
*
* INCRBYFLOAT commands are limited to double precision floating point values.
*
* Note: this is actually a string operation, that is, in Redis there are not "double" types.
* Simply the string stored at the key is parsed as a base double precision floating point value,
* incremented, and then converted back as a string. There is no DECRYBYFLOAT but providing a
* negative value will work as expected.
*
* Time complexity: O(1)
* @see #incr(byte[])
* @see #decr(byte[])
* @see #decrBy(byte[], long)
* @param key the key to increment
* @param increment the value to increment by
* @return Integer reply, this commands will reply with the new value of key after the increment.
*/
@Override
public Double incrByFloat(final byte[] key, final double increment) {
checkIsInMultiOrPipeline();
client.incrByFloat(key, increment);
String dval = client.getBulkReply();
return (dval != null ? new Double(dval) : null);
}
/**
* Increment the number stored at key by one. If the key does not exist or contains a value of a
* wrong type, set the key to the value of "0" before to perform the increment operation.
*
* INCR commands are limited to 64 bit signed integers.
*
* Note: this is actually a string operation, that is, in Redis there are not "integer" types.
* Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented,
* and then converted back as a string.
*
* Time complexity: O(1)
* @see #incrBy(byte[], long)
* @see #decr(byte[])
* @see #decrBy(byte[], long)
* @param key
* @return Integer reply, this commands will reply with the new value of key after the increment.
*/
@Override
public Long incr(final byte[] key) {
checkIsInMultiOrPipeline();
client.incr(key);
return client.getIntegerReply();
}
/**
* If the key already exists and is a string, this command appends the provided value at the end
* of the string. If the key does not exist it is created and set as an empty string, so APPEND
* will be very similar to SET in this special case.
*
* Time complexity: O(1). The amortized time complexity is O(1) assuming the appended value is
* small and the already present value is of any size, since the dynamic string library used by
* Redis will double the free space available on every reallocation.
* @param key
* @param value
* @return Integer reply, specifically the total length of the string after the append operation.
*/
@Override
public Long append(final byte[] key, final byte[] value) {
checkIsInMultiOrPipeline();
client.append(key, value);
return client.getIntegerReply();
}
/**
* Return a subset of the string from offset start to offset end (both offsets are inclusive).
* Negative offsets can be used in order to provide an offset starting from the end of the string.
* So -1 means the last char, -2 the penultimate and so forth.
*
* The function handles out of range requests without raising an error, but just limiting the
* resulting range to the actual length of the string.
*
* Time complexity: O(start+n) (with start being the start index and n the total length of the
* requested range). Note that the lookup part of this command is O(1) so for small strings this
* is actually an O(1) command.
* @param key
* @param start
* @param end
* @return Bulk reply
*/
@Override
public byte[] substr(final byte[] key, final int start, final int end) {
checkIsInMultiOrPipeline();
client.substr(key, start, end);
return client.getBinaryBulkReply();
}
/**
* Set the specified hash field to the specified value.
*
* If key does not exist, a new key holding a hash is created.
*
* Time complexity: O(1)
* @param key
* @param field
* @param value
* @return If the field already exists, and the HSET just produced an update of the value, 0 is
* returned, otherwise if a new field is created 1 is returned.
*/
@Override
public Long hset(final byte[] key, final byte[] field, final byte[] value) {
checkIsInMultiOrPipeline();
client.hset(key, field, value);
return client.getIntegerReply();
}
@Override
public Long hset(final byte[] key, final Map hash) {
checkIsInMultiOrPipeline();
client.hset(key, hash);
return client.getIntegerReply();
}
/**
* If key holds a hash, retrieve the value associated to the specified field.
*
* If the field is not found or the key does not exist, a special 'nil' value is returned.
*
* Time complexity: O(1)
* @param key
* @param field
* @return Bulk reply
*/
@Override
public byte[] hget(final byte[] key, final byte[] field) {
checkIsInMultiOrPipeline();
client.hget(key, field);
return client.getBinaryBulkReply();
}
/**
* Set the specified hash field to the specified value if the field not exists. Time
* complexity: O(1)
* @param key
* @param field
* @param value
* @return If the field already exists, 0 is returned, otherwise if a new field is created 1 is
* returned.
*/
@Override
public Long hsetnx(final byte[] key, final byte[] field, final byte[] value) {
checkIsInMultiOrPipeline();
client.hsetnx(key, field, value);
return client.getIntegerReply();
}
/**
* Set the respective fields to the respective values. HMSET replaces old values with new values.
*
* If key does not exist, a new key holding a hash is created.
*
* Time complexity: O(N) (with N being the number of fields)
* @param key
* @param hash
* @return Always OK because HMSET can't fail
*/
@Override
public String hmset(final byte[] key, final Map hash) {
checkIsInMultiOrPipeline();
client.hmset(key, hash);
return client.getStatusCodeReply();
}
/**
* Retrieve the values associated to the specified fields.
*
* If some of the specified fields do not exist, nil values are returned. Non existing keys are
* considered like empty hashes.
*
* Time complexity: O(N) (with N being the number of fields)
* @param key
* @param fields
* @return Multi Bulk Reply specifically a list of all the values associated with the specified
* fields, in the same order of the request.
*/
@Override
public List hmget(final byte[] key, final byte[]... fields) {
checkIsInMultiOrPipeline();
client.hmget(key, fields);
return client.getBinaryMultiBulkReply();
}
/**
* Increment the number stored at field in the hash at key by value. If key does not exist, a new
* key holding a hash is created. If field does not exist or holds a string, the value is set to 0
* before applying the operation. Since the value argument is signed you can use this command to
* perform both increments and decrements.
*
* The range of values supported by HINCRBY is limited to 64 bit signed integers.
*
* Time complexity: O(1)
* @param key
* @param field
* @param value
* @return Integer reply The new value at field after the increment operation.
*/
@Override
public Long hincrBy(final byte[] key, final byte[] field, final long value) {
checkIsInMultiOrPipeline();
client.hincrBy(key, field, value);
return client.getIntegerReply();
}
/**
* Increment the number stored at field in the hash at key by a double precision floating point
* value. If key does not exist, a new key holding a hash is created. If field does not exist or
* holds a string, the value is set to 0 before applying the operation. Since the value argument
* is signed you can use this command to perform both increments and decrements.
*
* The range of values supported by HINCRBYFLOAT is limited to double precision floating point
* values.
*
* Time complexity: O(1)
* @param key
* @param field
* @param value
* @return Double precision floating point reply The new value at field after the increment
* operation.
*/
@Override
public Double hincrByFloat(final byte[] key, final byte[] field, final double value) {
checkIsInMultiOrPipeline();
client.hincrByFloat(key, field, value);
final String dval = client.getBulkReply();
return (dval != null ? new Double(dval) : null);
}
/**
* Test for existence of a specified field in a hash. Time complexity: O(1)
* @param key
* @param field
* @return Return true if the hash stored at key contains the specified field. Return false if the key is
* not found or the field is not present.
*/
@Override
public Boolean hexists(final byte[] key, final byte[] field) {
checkIsInMultiOrPipeline();
client.hexists(key, field);
return client.getIntegerReply() == 1;
}
/**
* Remove the specified field from an hash stored at key.
*
* Time complexity: O(1)
* @param key
* @param fields
* @return If the field was present in the hash it is deleted and 1 is returned, otherwise 0 is
* returned and no operation is performed.
*/
@Override
public Long hdel(final byte[] key, final byte[]... fields) {
checkIsInMultiOrPipeline();
client.hdel(key, fields);
return client.getIntegerReply();
}
/**
* Return the number of items in a hash.
*
* Time complexity: O(1)
* @param key
* @return The number of entries (fields) contained in the hash stored at key. If the specified
* key does not exist, 0 is returned assuming an empty hash.
*/
@Override
public Long hlen(final byte[] key) {
checkIsInMultiOrPipeline();
client.hlen(key);
return client.getIntegerReply();
}
/**
* Return all the fields in a hash.
*
* Time complexity: O(N), where N is the total number of entries
* @param key
* @return All the fields names contained into a hash.
*/
@Override
public Set hkeys(final byte[] key) {
checkIsInMultiOrPipeline();
client.hkeys(key);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Return all the values in a hash.
*
* Time complexity: O(N), where N is the total number of entries
* @param key
* @return All the fields values contained into a hash.
*/
@Override
public List hvals(final byte[] key) {
checkIsInMultiOrPipeline();
client.hvals(key);
return client.getBinaryMultiBulkReply();
}
/**
* Return all the fields and associated values in a hash.
*
* Time complexity: O(N), where N is the total number of entries
* @param key
* @return All the fields and values contained into a hash.
*/
@Override
public Map hgetAll(final byte[] key) {
checkIsInMultiOrPipeline();
client.hgetAll(key);
final List flatHash = client.getBinaryMultiBulkReply();
final Map hash = new JedisByteHashMap();
final Iterator iterator = flatHash.iterator();
while (iterator.hasNext()) {
hash.put(iterator.next(), iterator.next());
}
return hash;
}
/**
* Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key. If the key
* does not exist an empty list is created just before the append operation. If the key exists but
* is not a List an error is returned.
*
* Time complexity: O(1)
* @see BinaryJedis#rpush(byte[], byte[]...)
* @param key
* @param strings
* @return Integer reply, specifically, the number of elements inside the list after the push
* operation.
*/
@Override
public Long rpush(final byte[] key, final byte[]... strings) {
checkIsInMultiOrPipeline();
client.rpush(key, strings);
return client.getIntegerReply();
}
/**
* Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key. If the key
* does not exist an empty list is created just before the append operation. If the key exists but
* is not a List an error is returned.
*
* Time complexity: O(1)
* @see BinaryJedis#rpush(byte[], byte[]...)
* @param key
* @param strings
* @return Integer reply, specifically, the number of elements inside the list after the push
* operation.
*/
@Override
public Long lpush(final byte[] key, final byte[]... strings) {
checkIsInMultiOrPipeline();
client.lpush(key, strings);
return client.getIntegerReply();
}
/**
* Return the length of the list stored at the specified key. If the key does not exist zero is
* returned (the same behaviour as for empty lists). If the value stored at key is not a list an
* error is returned.
*
* Time complexity: O(1)
* @param key
* @return The length of the list.
*/
@Override
public Long llen(final byte[] key) {
checkIsInMultiOrPipeline();
client.llen(key);
return client.getIntegerReply();
}
/**
* Return the specified elements of the list stored at the specified key. Start and end are
* zero-based indexes. 0 is the first element of the list (the list head), 1 the next element and
* so on.
*
* For example LRANGE foobar 0 2 will return the first three elements of the list.
*
* start and end can also be negative numbers indicating offsets from the end of the list. For
* example -1 is the last element of the list, -2 the penultimate element and so on.
*
* Consistency with range functions in various programming languages
*
* Note that if you have a list of numbers from 0 to 100, LRANGE 0 10 will return 11 elements,
* that is, rightmost item is included. This may or may not be consistent with behavior of
* range-related functions in your programming language of choice (think Ruby's Range.new,
* Array#slice or Python's range() function).
*
* LRANGE behavior is consistent with one of Tcl.
*
* Out-of-range indexes
*
* Indexes out of range will not produce an error: if start is over the end of the list, or start
* > end, an empty list is returned. If end is over the end of the list Redis will threat it
* just like the last element of the list.
*
* Time complexity: O(start+n) (with n being the length of the range and start being the start
* offset)
* @param key
* @param start
* @param stop
* @return Multi bulk reply, specifically a list of elements in the specified range.
*/
@Override
public List lrange(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.lrange(key, start, stop);
return client.getBinaryMultiBulkReply();
}
/**
* Trim an existing list so that it will contain only the specified range of elements specified.
* Start and end are zero-based indexes. 0 is the first element of the list (the list head), 1 the
* next element and so on.
*
* For example LTRIM foobar 0 2 will modify the list stored at foobar key so that only the first
* three elements of the list will remain.
*
* start and end can also be negative numbers indicating offsets from the end of the list. For
* example -1 is the last element of the list, -2 the penultimate element and so on.
*
* Indexes out of range will not produce an error: if start is over the end of the list, or start
* > end, an empty list is left as value. If end over the end of the list Redis will threat it
* just like the last element of the list.
*
* Hint: the obvious use of LTRIM is together with LPUSH/RPUSH. For example:
*
* {@code lpush("mylist", "someelement"); ltrim("mylist", 0, 99); * }
*
* The above two commands will push elements in the list taking care that the list will not grow
* without limits. This is very useful when using Redis to store logs for example. It is important
* to note that when used in this way LTRIM is an O(1) operation because in the average case just
* one element is removed from the tail of the list.
*
* Time complexity: O(n) (with n being len of list - len of range)
* @param key
* @param start
* @param stop
* @return Status code reply
*/
@Override
public String ltrim(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.ltrim(key, start, stop);
return client.getStatusCodeReply();
}
/**
* Return the specified element of the list stored at the specified key. 0 is the first element, 1
* the second and so on. Negative indexes are supported, for example -1 is the last element, -2
* the penultimate and so on.
*
* If the value stored at key is not of list type an error is returned. If the index is out of
* range a 'nil' reply is returned.
*
* Note that even if the average time complexity is O(n) asking for the first or the last element
* of the list is O(1).
*
* Time complexity: O(n) (with n being the length of the list)
* @param key
* @param index
* @return Bulk reply, specifically the requested element
*/
@Override
public byte[] lindex(final byte[] key, final long index) {
checkIsInMultiOrPipeline();
client.lindex(key, index);
return client.getBinaryBulkReply();
}
/**
* Set a new value as the element at index position of the List at key.
*
* Out of range indexes will generate an error.
*
* Similarly to other list commands accepting indexes, the index can be negative to access
* elements starting from the end of the list. So -1 is the last element, -2 is the penultimate,
* and so forth.
*
* Time complexity:
*
* O(N) (with N being the length of the list), setting the first or last elements of the list is
* O(1).
* @see #lindex(byte[], long)
* @param key
* @param index
* @param value
* @return Status code reply
*/
@Override
public String lset(final byte[] key, final long index, final byte[] value) {
checkIsInMultiOrPipeline();
client.lset(key, index, value);
return client.getStatusCodeReply();
}
/**
* Remove the first count occurrences of the value element from the list. If count is zero all the
* elements are removed. If count is negative elements are removed from tail to head, instead to
* go from head to tail that is the normal behaviour. So for example LREM with count -2 and hello
* as value to remove against the list (a,b,c,hello,x,hello,hello) will leave the list
* (a,b,c,hello,x). The number of removed elements is returned as an integer, see below for more
* information about the returned value. Note that non existing keys are considered like empty
* lists by LREM, so LREM against non existing keys will always return 0.
*
* Time complexity: O(N) (with N being the length of the list)
* @param key
* @param count
* @param value
* @return Integer Reply, specifically: The number of removed elements if the operation succeeded
*/
@Override
public Long lrem(final byte[] key, final long count, final byte[] value) {
checkIsInMultiOrPipeline();
client.lrem(key, count, value);
return client.getIntegerReply();
}
/**
* Atomically return and remove the first (LPOP) or last (RPOP) element of the list. For example
* if the list contains the elements "a","b","c" LPOP will return "a" and the list will become
* "b","c".
*
* If the key does not exist or the list is already empty the special value 'nil' is returned.
* @see #rpop(byte[])
* @param key
* @return Bulk reply
*/
@Override
public byte[] lpop(final byte[] key) {
checkIsInMultiOrPipeline();
client.lpop(key);
return client.getBinaryBulkReply();
}
/**
* Atomically return and remove the first (LPOP) or last (RPOP) element of the list. For example
* if the list contains the elements "a","b","c" LPOP will return "a" and the list will become
* "b","c".
*
* If the key does not exist or the list is already empty the special value 'nil' is returned.
* @see #lpop(byte[])
* @param key
* @return Bulk reply
*/
@Override
public byte[] rpop(final byte[] key) {
checkIsInMultiOrPipeline();
client.rpop(key);
return client.getBinaryBulkReply();
}
/**
* Atomically return and remove the last (tail) element of the srckey list, and push the element
* as the first (head) element of the dstkey list. For example if the source list contains the
* elements "a","b","c" and the destination list contains the elements "foo","bar" after an
* RPOPLPUSH command the content of the two lists will be "a","b" and "c","foo","bar".
*
* If the key does not exist or the list is already empty the special value 'nil' is returned. If
* the srckey and dstkey are the same the operation is equivalent to removing the last element
* from the list and pushing it as first element of the list, so it's a "list rotation" command.
*
* Time complexity: O(1)
* @param srckey
* @param dstkey
* @return Bulk reply
*/
@Override
public byte[] rpoplpush(final byte[] srckey, final byte[] dstkey) {
checkIsInMultiOrPipeline();
client.rpoplpush(srckey, dstkey);
return client.getBinaryBulkReply();
}
/**
* Add the specified member to the set value stored at key. If member is already a member of the
* set no operation is performed. If key does not exist a new set with the specified member as
* sole member is created. If the key exists but does not hold a set value an error is returned.
*
* Time complexity O(1)
* @param key
* @param members
* @return Integer reply, specifically: 1 if the new element was added 0 if the element was
* already a member of the set
*/
@Override
public Long sadd(final byte[] key, final byte[]... members) {
checkIsInMultiOrPipeline();
client.sadd(key, members);
return client.getIntegerReply();
}
/**
* Return all the members (elements) of the set value stored at key. This is just syntax glue for
* {@link #sinter(byte[]...)} SINTER}.
*
* Time complexity O(N)
* @param key the key of the set
* @return Multi bulk reply
*/
@Override
public Set smembers(final byte[] key) {
checkIsInMultiOrPipeline();
client.smembers(key);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Remove the specified member from the set value stored at key. If member was not a member of the
* set no operation is performed. If key does not hold a set value an error is returned.
*
* Time complexity O(1)
* @param key the key of the set
* @param member the set member to remove
* @return Integer reply, specifically: 1 if the new element was removed 0 if the new element was
* not a member of the set
*/
@Override
public Long srem(final byte[] key, final byte[]... member) {
checkIsInMultiOrPipeline();
client.srem(key, member);
return client.getIntegerReply();
}
/**
* Remove a random element from a Set returning it as return value. If the Set is empty or the key
* does not exist, a nil object is returned.
*
* The {@link #srandmember(byte[])} command does a similar work but the returned element is not
* removed from the Set.
*
* Time complexity O(1)
* @param key
* @return Bulk reply
*/
@Override
public byte[] spop(final byte[] key) {
checkIsInMultiOrPipeline();
client.spop(key);
return client.getBinaryBulkReply();
}
@Override
public Set spop(final byte[] key, final long count) {
checkIsInMultiOrPipeline();
client.spop(key, count);
List members = client.getBinaryMultiBulkReply();
if (members == null) return null;
return SetFromList.of(members);
}
/**
* Move the specified member from the set at srckey to the set at dstkey. This operation is
* atomic, in every given moment the element will appear to be in the source or destination set
* for accessing clients.
*
* If the source set does not exist or does not contain the specified element no operation is
* performed and zero is returned, otherwise the element is removed from the source set and added
* to the destination set. On success one is returned, even if the element was already present in
* the destination set.
*
* An error is raised if the source or destination keys contain a non Set value.
*
* Time complexity O(1)
* @param srckey
* @param dstkey
* @param member
* @return Integer reply, specifically: 1 if the element was moved 0 if the element was not found
* on the first set and no operation was performed
*/
@Override
public Long smove(final byte[] srckey, final byte[] dstkey, final byte[] member) {
checkIsInMultiOrPipeline();
client.smove(srckey, dstkey, member);
return client.getIntegerReply();
}
/**
* Return the set cardinality (number of elements). If the key does not exist 0 is returned, like
* for empty sets.
* @param key
* @return Integer reply, specifically: the cardinality (number of elements) of the set as an
* integer.
*/
@Override
public Long scard(final byte[] key) {
checkIsInMultiOrPipeline();
client.scard(key);
return client.getIntegerReply();
}
/**
* Return true if member is a member of the set stored at key, otherwise false is returned.
*
* Time complexity O(1)
* @param key
* @param member
* @return Boolean reply, specifically: true if the element is a member of the set false if the element
* is not a member of the set OR if the key does not exist
*/
@Override
public Boolean sismember(final byte[] key, final byte[] member) {
checkIsInMultiOrPipeline();
client.sismember(key, member);
return client.getIntegerReply() == 1;
}
/**
* Return the members of a set resulting from the intersection of all the sets hold at the
* specified keys. Like in {@link #lrange(byte[], long, long)} LRANGE} the result is sent to the
* client as a multi-bulk reply (see the protocol specification for more information). If just a
* single key is specified, then this command produces the same result as
* {@link #smembers(byte[]) SMEMBERS}. Actually SMEMBERS is just syntax sugar for SINTER.
*
* Non existing keys are considered like empty sets, so if one of the keys is missing an empty set
* is returned (since the intersection with an empty set always is an empty set).
*
* Time complexity O(N*M) worst case where N is the cardinality of the smallest set and M the
* number of sets
* @param keys
* @return Multi bulk reply, specifically the list of common elements.
*/
@Override
public Set sinter(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sinter(keys);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* This commanad works exactly like {@link #sinter(byte[]...) SINTER} but instead of being returned
* the resulting set is stored as dstkey.
*
* Time complexity O(N*M) worst case where N is the cardinality of the smallest set and M the
* number of sets
* @param dstkey
* @param keys
* @return Status code reply
*/
@Override
public Long sinterstore(final byte[] dstkey, final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sinterstore(dstkey, keys);
return client.getIntegerReply();
}
/**
* Return the members of a set resulting from the union of all the sets hold at the specified
* keys. Like in {@link #lrange(byte[], long, long)} LRANGE} the result is sent to the client as a
* multi-bulk reply (see the protocol specification for more information). If just a single key is
* specified, then this command produces the same result as {@link #smembers(byte[]) SMEMBERS}.
*
* Non existing keys are considered like empty sets.
*
* Time complexity O(N) where N is the total number of elements in all the provided sets
* @param keys
* @return Multi bulk reply, specifically the list of common elements.
*/
@Override
public Set sunion(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sunion(keys);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* This command works exactly like {@link #sunion(byte[]...) SUNION} but instead of being returned
* the resulting set is stored as dstkey. Any existing value in dstkey will be over-written.
*
* Time complexity O(N) where N is the total number of elements in all the provided sets
* @param dstkey
* @param keys
* @return Status code reply
*/
@Override
public Long sunionstore(final byte[] dstkey, final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sunionstore(dstkey, keys);
return client.getIntegerReply();
}
/**
* Return the difference between the Set stored at key1 and all the Sets key2, ..., keyN
*
* Example:
*
*
* key1 = [x, a, b, c]
* key2 = [c]
* key3 = [a, d]
* SDIFF key1,key2,key3 => [x, b]
*
*
* Non existing keys are considered like empty sets.
*
* Time complexity:
*
* O(N) with N being the total number of elements of all the sets
* @param keys
* @return Return the members of a set resulting from the difference between the first set
* provided and all the successive sets.
*/
@Override
public Set sdiff(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sdiff(keys);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* This command works exactly like {@link #sdiff(byte[]...) SDIFF} but instead of being returned
* the resulting set is stored in dstkey.
* @param dstkey
* @param keys
* @return Status code reply
*/
@Override
public Long sdiffstore(final byte[] dstkey, final byte[]... keys) {
checkIsInMultiOrPipeline();
client.sdiffstore(dstkey, keys);
return client.getIntegerReply();
}
/**
* Return a random element from a Set, without removing the element. If the Set is empty or the
* key does not exist, a nil object is returned.
*
* The SPOP command does a similar work but the returned element is popped (removed) from the Set.
*
* Time complexity O(1)
* @param key
* @return Bulk reply
*/
@Override
public byte[] srandmember(final byte[] key) {
checkIsInMultiOrPipeline();
client.srandmember(key);
return client.getBinaryBulkReply();
}
@Override
public List srandmember(final byte[] key, final int count) {
checkIsInMultiOrPipeline();
client.srandmember(key, count);
return client.getBinaryMultiBulkReply();
}
/**
* Add the specified member having the specified score to the sorted set stored at key. If member
* is already a member of the sorted set the score is updated, and the element reinserted in the
* right position to ensure sorting. If key does not exist a new sorted set with the specified
* member as sole member is created. If the key exists but does not hold a sorted set value an
* error is returned.
*
* The score value can be the string representation of a double precision floating point number.
*
* Time complexity O(log(N)) with N being the number of elements in the sorted set
* @param key
* @param score
* @param member
* @return Integer reply, specifically: 1 if the new element was added 0 if the element was
* already a member of the sorted set and the score was updated
*/
@Override
public Long zadd(final byte[] key, final double score, final byte[] member) {
checkIsInMultiOrPipeline();
client.zadd(key, score, member);
return client.getIntegerReply();
}
@Override
public Long zadd(final byte[] key, final double score, final byte[] member, final ZAddParams params) {
checkIsInMultiOrPipeline();
client.zadd(key, score, member, params);
return client.getIntegerReply();
}
@Override
public Long zadd(final byte[] key, final Map scoreMembers) {
checkIsInMultiOrPipeline();
client.zadd(key, scoreMembers);
return client.getIntegerReply();
}
@Override
public Long zadd(final byte[] key, final Map scoreMembers, final ZAddParams params) {
checkIsInMultiOrPipeline();
client.zadd(key, scoreMembers, params);
return client.getIntegerReply();
}
@Override
public Set zrange(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.zrange(key, start, stop);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Remove the specified member from the sorted set value stored at key. If member was not a member
* of the set no operation is performed. If key does not not hold a set value an error is
* returned.
*
* Time complexity O(log(N)) with N being the number of elements in the sorted set
* @param key
* @param members
* @return Integer reply, specifically: 1 if the new element was removed 0 if the new element was
* not a member of the set
*/
@Override
public Long zrem(final byte[] key, final byte[]... members) {
checkIsInMultiOrPipeline();
client.zrem(key, members);
return client.getIntegerReply();
}
/**
* If member already exists in the sorted set adds the increment to its score and updates the
* position of the element in the sorted set accordingly. If member does not already exist in the
* sorted set it is added with increment as score (that is, like if the previous score was
* virtually zero). If key does not exist a new sorted set with the specified member as sole
* member is created. If the key exists but does not hold a sorted set value an error is returned.
*
* The score value can be the string representation of a double precision floating point number.
* It's possible to provide a negative value to perform a decrement.
*
* For an introduction to sorted sets check the Introduction to Redis data types page.
*
* Time complexity O(log(N)) with N being the number of elements in the sorted set
* @param key
* @param increment
* @param member
* @return The new score
*/
@Override
public Double zincrby(final byte[] key, final double increment, final byte[] member) {
checkIsInMultiOrPipeline();
client.zincrby(key, increment, member);
return BuilderFactory.DOUBLE.build(client.getOne());
}
@Override
public Double zincrby(final byte[] key, final double increment, final byte[] member, final ZIncrByParams params) {
checkIsInMultiOrPipeline();
client.zincrby(key, increment, member, params);
return BuilderFactory.DOUBLE.build(client.getOne());
}
/**
* Return the rank (or index) or member in the sorted set at key, with scores being ordered from
* low to high.
*
* When the given member does not exist in the sorted set, the special value 'nil' is returned.
* The returned rank (or index) of the member is 0-based for both commands.
*
* Time complexity:
*
* O(log(N))
* @see #zrevrank(byte[], byte[])
* @param key
* @param member
* @return Integer reply or a nil bulk reply, specifically: the rank of the element as an integer
* reply if the element exists. A nil bulk reply if there is no such element.
*/
@Override
public Long zrank(final byte[] key, final byte[] member) {
checkIsInMultiOrPipeline();
client.zrank(key, member);
return client.getIntegerReply();
}
/**
* Return the rank (or index) or member in the sorted set at key, with scores being ordered from
* high to low.
*
* When the given member does not exist in the sorted set, the special value 'nil' is returned.
* The returned rank (or index) of the member is 0-based for both commands.
*
* Time complexity:
*
* O(log(N))
* @see #zrank(byte[], byte[])
* @param key
* @param member
* @return Integer reply or a nil bulk reply, specifically: the rank of the element as an integer
* reply if the element exists. A nil bulk reply if there is no such element.
*/
@Override
public Long zrevrank(final byte[] key, final byte[] member) {
checkIsInMultiOrPipeline();
client.zrevrank(key, member);
return client.getIntegerReply();
}
@Override
public Set zrevrange(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.zrevrange(key, start, stop);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrangeWithScores(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.zrangeWithScores(key, start, stop);
return getTupledSet();
}
@Override
public Set zrevrangeWithScores(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.zrevrangeWithScores(key, start, stop);
return getTupledSet();
}
/**
* Return the sorted set cardinality (number of elements). If the key does not exist 0 is
* returned, like for empty sorted sets.
*
* Time complexity O(1)
* @param key
* @return the cardinality (number of elements) of the set as an integer.
*/
@Override
public Long zcard(final byte[] key) {
checkIsInMultiOrPipeline();
client.zcard(key);
return client.getIntegerReply();
}
/**
* Return the score of the specified element of the sorted set at key. If the specified element
* does not exist in the sorted set, or the key does not exist at all, a special 'nil' value is
* returned.
*
* Time complexity: O(1)
* @param key
* @param member
* @return the score
*/
@Override
public Double zscore(final byte[] key, final byte[] member) {
checkIsInMultiOrPipeline();
client.zscore(key, member);
final String score = client.getBulkReply();
return (score != null ? new Double(score) : null);
}
@Override
public Tuple zpopmax(final byte[] key) {
checkIsInMultiOrPipeline();
client.zpopmax(key);
return BuilderFactory.TUPLE.build(client.getBinaryMultiBulkReply());
}
@Override
public Set zpopmax(final byte[] key, final int count) {
checkIsInMultiOrPipeline();
client.zpopmax(key, count);
return getTupledSet();
}
@Override
public Tuple zpopmin(final byte[] key) {
checkIsInMultiOrPipeline();
client.zpopmin(key);
return BuilderFactory.TUPLE.build(client.getBinaryMultiBulkReply());
}
@Override
public Set zpopmin(final byte[] key, final int count) {
checkIsInMultiOrPipeline();
client.zpopmin(key, count);
return getTupledSet();
}
public Transaction multi() {
client.multi();
client.getOne(); // expected OK
transaction = new Transaction(client);
return transaction;
}
protected void checkIsInMultiOrPipeline() {
if (client.isInMulti()) {
throw new JedisDataException(
"Cannot use Jedis when in Multi. Please use Transaction or reset jedis state.");
} else if (pipeline != null && pipeline.hasPipelinedResponse()) {
throw new JedisDataException(
"Cannot use Jedis when in Pipeline. Please use Pipeline or reset jedis state .");
}
}
public void connect() {
client.connect();
}
public void disconnect() {
client.disconnect();
}
public void resetState() {
if (client.isConnected()) {
if (transaction != null) {
transaction.close();
}
if (pipeline != null) {
pipeline.close();
}
client.resetState();
}
transaction = null;
pipeline = null;
}
@Override
public String watch(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.watch(keys);
return client.getStatusCodeReply();
}
@Override
public String unwatch() {
checkIsInMultiOrPipeline();
client.unwatch();
return client.getStatusCodeReply();
}
@Override
public void close() {
client.close();
}
/**
* Sort a Set or a List.
*
* Sort the elements contained in the List, Set, or Sorted Set value at key. By default sorting is
* numeric with elements being compared as double precision floating point numbers. This is the
* simplest form of SORT.
* @see #sort(byte[], byte[])
* @see #sort(byte[], SortingParams)
* @see #sort(byte[], SortingParams, byte[])
* @param key
* @return Assuming the Set/List at key contains a list of numbers, the return value will be the
* list of numbers ordered from the smallest to the biggest number.
*/
@Override
public List sort(final byte[] key) {
checkIsInMultiOrPipeline();
client.sort(key);
return client.getBinaryMultiBulkReply();
}
/**
* Sort a Set or a List accordingly to the specified parameters.
*
* examples:
*
* Given are the following sets and key/values:
*
*
* x = [1, 2, 3]
* y = [a, b, c]
*
* k1 = z
* k2 = y
* k3 = x
*
* w1 = 9
* w2 = 8
* w3 = 7
*
*
* Sort Order:
*
*
* sort(x) or sort(x, sp.asc())
* -> [1, 2, 3]
*
* sort(x, sp.desc())
* -> [3, 2, 1]
*
* sort(y)
* -> [c, a, b]
*
* sort(y, sp.alpha())
* -> [a, b, c]
*
* sort(y, sp.alpha().desc())
* -> [c, a, b]
*
*
* Limit (e.g. for Pagination):
*
*
* sort(x, sp.limit(0, 2))
* -> [1, 2]
*
* sort(y, sp.alpha().desc().limit(1, 2))
* -> [b, a]
*
*
* Sorting by external keys:
*
*
* sort(x, sb.by(w*))
* -> [3, 2, 1]
*
* sort(x, sb.by(w*).desc())
* -> [1, 2, 3]
*
*
* Getting external keys:
*
*
* sort(x, sp.by(w*).get(k*))
* -> [x, y, z]
*
* sort(x, sp.by(w*).get(#).get(k*))
* -> [3, x, 2, y, 1, z]
*
* @see #sort(byte[])
* @see #sort(byte[], SortingParams, byte[])
* @param key
* @param sortingParameters
* @return a list of sorted elements.
*/
@Override
public List sort(final byte[] key, final SortingParams sortingParameters) {
checkIsInMultiOrPipeline();
client.sort(key, sortingParameters);
return client.getBinaryMultiBulkReply();
}
/**
* BLPOP (and BRPOP) is a blocking list pop primitive. You can see this commands as blocking
* versions of LPOP and RPOP able to block if the specified keys don't exist or contain empty
* lists.
*
* The following is a description of the exact semantic. We describe BLPOP but the two commands
* are identical, the only difference is that BLPOP pops the element from the left (head) of the
* list, and BRPOP pops from the right (tail).
*
* Non blocking behavior
*
* When BLPOP is called, if at least one of the specified keys contain a non empty list, an
* element is popped from the head of the list and returned to the caller together with the name
* of the key (BLPOP returns a two elements array, the first element is the key, the second the
* popped value).
*
* Keys are scanned from left to right, so for instance if you issue BLPOP list1 list2 list3 0
* against a dataset where list1 does not exist but list2 and list3 contain non empty lists, BLPOP
* guarantees to return an element from the list stored at list2 (since it is the first non empty
* list starting from the left).
*
* Blocking behavior
*
* If none of the specified keys exist or contain non empty lists, BLPOP blocks until some other
* client performs a LPUSH or an RPUSH operation against one of the lists.
*
* Once new data is present on one of the lists, the client finally returns with the name of the
* key unblocking it and the popped value.
*
* When blocking, if a non-zero timeout is specified, the client will unblock returning a nil
* special value if the specified amount of seconds passed without a push operation against at
* least one of the specified keys.
*
* The timeout argument is interpreted as an integer value. A timeout of zero means instead to
* block forever.
*
* Multiple clients blocking for the same keys
*
* Multiple clients can block for the same key. They are put into a queue, so the first to be
* served will be the one that started to wait earlier, in a first-blpopping first-served fashion.
*
* blocking POP inside a MULTI/EXEC transaction
*
* BLPOP and BRPOP can be used with pipelining (sending multiple commands and reading the replies
* in batch), but it does not make sense to use BLPOP or BRPOP inside a MULTI/EXEC block (a Redis
* transaction).
*
* The behavior of BLPOP inside MULTI/EXEC when the list is empty is to return a multi-bulk nil
* reply, exactly what happens when the timeout is reached. If you like science fiction, think at
* it like if inside MULTI/EXEC the time will flow at infinite speed :)
*
* Time complexity: O(1)
* @see #brpop(int, byte[]...)
* @param timeout
* @param keys
* @return BLPOP returns a two-elements array via a multi bulk reply in order to return both the
* unblocking key and the popped value.
*
* When a non-zero timeout is specified, and the BLPOP operation timed out, the return
* value is a nil multi bulk reply. Most client values will return false or nil
* accordingly to the programming language used.
*/
@Override
public List blpop(final int timeout, final byte[]... keys) {
return blpop(getArgsAddTimeout(timeout, keys));
}
private byte[][] getArgsAddTimeout(int timeout, byte[][] keys) {
int size = keys.length;
final byte[][] args = new byte[size + 1][];
for (int at = 0; at != size; ++at) {
args[at] = keys[at];
}
args[size] = Protocol.toByteArray(timeout);
return args;
}
/**
* Sort a Set or a List accordingly to the specified parameters and store the result at dstkey.
* @see #sort(byte[], SortingParams)
* @see #sort(byte[])
* @see #sort(byte[], byte[])
* @param key
* @param sortingParameters
* @param dstkey
* @return The number of elements of the list at dstkey.
*/
@Override
public Long sort(final byte[] key, final SortingParams sortingParameters, final byte[] dstkey) {
checkIsInMultiOrPipeline();
client.sort(key, sortingParameters, dstkey);
return client.getIntegerReply();
}
/**
* Sort a Set or a List and Store the Result at dstkey.
*
* Sort the elements contained in the List, Set, or Sorted Set value at key and store the result
* at dstkey. By default sorting is numeric with elements being compared as double precision
* floating point numbers. This is the simplest form of SORT.
* @see #sort(byte[])
* @see #sort(byte[], SortingParams)
* @see #sort(byte[], SortingParams, byte[])
* @param key
* @param dstkey
* @return The number of elements of the list at dstkey.
*/
@Override
public Long sort(final byte[] key, final byte[] dstkey) {
checkIsInMultiOrPipeline();
client.sort(key, dstkey);
return client.getIntegerReply();
}
/**
* BLPOP (and BRPOP) is a blocking list pop primitive. You can see this commands as blocking
* versions of LPOP and RPOP able to block if the specified keys don't exist or contain empty
* lists.
*
* The following is a description of the exact semantic. We describe BLPOP but the two commands
* are identical, the only difference is that BLPOP pops the element from the left (head) of the
* list, and BRPOP pops from the right (tail).
*
* Non blocking behavior
*
* When BLPOP is called, if at least one of the specified keys contain a non empty list, an
* element is popped from the head of the list and returned to the caller together with the name
* of the key (BLPOP returns a two elements array, the first element is the key, the second the
* popped value).
*
* Keys are scanned from left to right, so for instance if you issue BLPOP list1 list2 list3 0
* against a dataset where list1 does not exist but list2 and list3 contain non empty lists, BLPOP
* guarantees to return an element from the list stored at list2 (since it is the first non empty
* list starting from the left).
*
* Blocking behavior
*
* If none of the specified keys exist or contain non empty lists, BLPOP blocks until some other
* client performs a LPUSH or an RPUSH operation against one of the lists.
*
* Once new data is present on one of the lists, the client finally returns with the name of the
* key unblocking it and the popped value.
*
* When blocking, if a non-zero timeout is specified, the client will unblock returning a nil
* special value if the specified amount of seconds passed without a push operation against at
* least one of the specified keys.
*
* The timeout argument is interpreted as an integer value. A timeout of zero means instead to
* block forever.
*
* Multiple clients blocking for the same keys
*
* Multiple clients can block for the same key. They are put into a queue, so the first to be
* served will be the one that started to wait earlier, in a first-blpopping first-served fashion.
*
* blocking POP inside a MULTI/EXEC transaction
*
* BLPOP and BRPOP can be used with pipelining (sending multiple commands and reading the replies
* in batch), but it does not make sense to use BLPOP or BRPOP inside a MULTI/EXEC block (a Redis
* transaction).
*
* The behavior of BLPOP inside MULTI/EXEC when the list is empty is to return a multi-bulk nil
* reply, exactly what happens when the timeout is reached. If you like science fiction, think at
* it like if inside MULTI/EXEC the time will flow at infinite speed :)
*
* Time complexity: O(1)
* @see #blpop(int, byte[]...)
* @param timeout
* @param keys
* @return BLPOP returns a two-elements array via a multi bulk reply in order to return both the
* unblocking key and the popped value.
*
* When a non-zero timeout is specified, and the BLPOP operation timed out, the return
* value is a nil multi bulk reply. Most client values will return false or nil
* accordingly to the programming language used.
*/
@Override
public List brpop(final int timeout, final byte[]... keys) {
return brpop(getArgsAddTimeout(timeout, keys));
}
@Override
public List blpop(final byte[]... args) {
checkIsInMultiOrPipeline();
client.blpop(args);
client.setTimeoutInfinite();
try {
return client.getBinaryMultiBulkReply();
} finally {
client.rollbackTimeout();
}
}
@Override
public List brpop(final byte[]... args) {
checkIsInMultiOrPipeline();
client.brpop(args);
client.setTimeoutInfinite();
try {
return client.getBinaryMultiBulkReply();
} finally {
client.rollbackTimeout();
}
}
/**
* Request for authentication in a password protected Redis server. A Redis server can be
* instructed to require a password before to allow clients to issue commands. This is done using
* the requirepass directive in the Redis configuration file. If the password given by the client
* is correct the server replies with an OK status code reply and starts accepting commands from
* the client. Otherwise an error is returned and the clients needs to try a new password. Note
* that for the high performance nature of Redis it is possible to try a lot of passwords in
* parallel in very short time, so make sure to generate a strong and very long password so that
* this attack is infeasible.
* @param password
* @return Status code reply
*/
@Override
public String auth(final String password) {
checkIsInMultiOrPipeline();
if(StringUtils.isBlank(this.user)){
client.auth(password);
}else{
client.auth(user,password);
}
return client.getStatusCodeReply();
}
/**
* Request for authentication with a Redis Server that is using ACL where user are authenticated with
* username and password.
* See https://redis.io/topics/acl
* @param user
* @param password
* @return
*/
@Override
public String auth(final String user, final String password) {
checkIsInMultiOrPipeline();
client.auth(user, password);
return client.getStatusCodeReply();
}
public Pipeline pipelined() {
pipeline = new Pipeline();
pipeline.setClient(client);
return pipeline;
}
@Override
public Long zcount(final byte[] key, final double min, final double max) {
checkIsInMultiOrPipeline();
client.zcount(key, min, max);
return client.getIntegerReply();
}
@Override
public Long zcount(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zcount(key, min, max);
return client.getIntegerReply();
}
/**
* Return the all the elements in the sorted set at key with a score between min and max
* (including elements with score equal to min or max).
*
* The elements having the same score are returned sorted lexicographically as ASCII strings (this
* follows from a property of Redis sorted sets and does not involve further computation).
*
* Using the optional {@link #zrangeByScore(byte[], double, double, int, int) LIMIT} it's possible
* to get only a range of the matching elements in an SQL-alike way. Note that if offset is large
* the commands needs to traverse the list for offset elements and this adds up to the O(M)
* figure.
*
* The {@link #zcount(byte[], double, double) ZCOUNT} command is similar to
* {@link #zrangeByScore(byte[], double, double) ZRANGEBYSCORE} but instead of returning the
* actual elements in the specified interval, it just returns the number of matching elements.
*
* Exclusive intervals and infinity
*
* min and max can be -inf and +inf, so that you are not required to know what's the greatest or
* smallest element in order to take, for instance, elements "up to a given value".
*
* Also while the interval is for default closed (inclusive) it's possible to specify open
* intervals prefixing the score with a "(" character, so for instance:
*
* {@code ZRANGEBYSCORE zset (1.3 5}
*
* Will return all the values with score > 1.3 and <= 5, while for instance:
*
* {@code ZRANGEBYSCORE zset (5 (10}
*
* Will return all the values with score > 5 and < 10 (5 and 10 excluded).
*
* Time complexity:
*
* O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of
* elements returned by the command, so if M is constant (for instance you always ask for the
* first ten elements with LIMIT) you can consider it O(log(N))
* @see #zrangeByScore(byte[], double, double)
* @see #zrangeByScore(byte[], double, double, int, int)
* @see #zrangeByScoreWithScores(byte[], double, double)
* @see #zrangeByScoreWithScores(byte[], double, double, int, int)
* @see #zcount(byte[], double, double)
* @param key
* @param min
* @param max
* @return Multi bulk reply specifically a list of elements in the specified score range.
*/
@Override
public Set zrangeByScore(final byte[] key, final double min, final double max) {
checkIsInMultiOrPipeline();
client.zrangeByScore(key, min, max);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrangeByScore(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zrangeByScore(key, min, max);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Return the all the elements in the sorted set at key with a score between min and max
* (including elements with score equal to min or max).
*
* The elements having the same score are returned sorted lexicographically as ASCII strings (this
* follows from a property of Redis sorted sets and does not involve further computation).
*
* Using the optional {@link #zrangeByScore(byte[], double, double, int, int) LIMIT} it's possible
* to get only a range of the matching elements in an SQL-alike way. Note that if offset is large
* the commands needs to traverse the list for offset elements and this adds up to the O(M)
* figure.
*
* The {@link #zcount(byte[], double, double) ZCOUNT} command is similar to
* {@link #zrangeByScore(byte[], double, double) ZRANGEBYSCORE} but instead of returning the
* actual elements in the specified interval, it just returns the number of matching elements.
*
* Exclusive intervals and infinity
*
* min and max can be -inf and +inf, so that you are not required to know what's the greatest or
* smallest element in order to take, for instance, elements "up to a given value".
*
* Also while the interval is for default closed (inclusive) it's possible to specify open
* intervals prefixing the score with a "(" character, so for instance:
*
* {@code ZRANGEBYSCORE zset (1.3 5}
*
* Will return all the values with score > 1.3 and <= 5, while for instance:
*
* {@code ZRANGEBYSCORE zset (5 (10}
*
* Will return all the values with score > 5 and < 10 (5 and 10 excluded).
*
* Time complexity:
*
* O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of
* elements returned by the command, so if M is constant (for instance you always ask for the
* first ten elements with LIMIT) you can consider it O(log(N))
* @see #zrangeByScore(byte[], double, double)
* @see #zrangeByScore(byte[], double, double, int, int)
* @see #zrangeByScoreWithScores(byte[], double, double)
* @see #zrangeByScoreWithScores(byte[], double, double, int, int)
* @see #zcount(byte[], double, double)
* @param key
* @param min
* @param max
* @param offset
* @param count
* @return Multi bulk reply specifically a list of elements in the specified score range.
*/
@Override
public Set zrangeByScore(final byte[] key, final double min, final double max,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrangeByScore(key, min, max, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrangeByScore(final byte[] key, final byte[] min, final byte[] max,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrangeByScore(key, min, max, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
/**
* Return the all the elements in the sorted set at key with a score between min and max
* (including elements with score equal to min or max).
*
* The elements having the same score are returned sorted lexicographically as ASCII strings (this
* follows from a property of Redis sorted sets and does not involve further computation).
*
* Using the optional {@link #zrangeByScore(byte[], double, double, int, int) LIMIT} it's possible
* to get only a range of the matching elements in an SQL-alike way. Note that if offset is large
* the commands needs to traverse the list for offset elements and this adds up to the O(M)
* figure.
*
* The {@link #zcount(byte[], double, double) ZCOUNT} command is similar to
* {@link #zrangeByScore(byte[], double, double) ZRANGEBYSCORE} but instead of returning the
* actual elements in the specified interval, it just returns the number of matching elements.
*
* Exclusive intervals and infinity
*
* min and max can be -inf and +inf, so that you are not required to know what's the greatest or
* smallest element in order to take, for instance, elements "up to a given value".
*
* Also while the interval is for default closed (inclusive) it's possible to specify open
* intervals prefixing the score with a "(" character, so for instance:
*
* {@code ZRANGEBYSCORE zset (1.3 5}
*
* Will return all the values with score > 1.3 and <= 5, while for instance:
*
* {@code ZRANGEBYSCORE zset (5 (10}
*
* Will return all the values with score > 5 and < 10 (5 and 10 excluded).
*
* Time complexity:
*
* O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of
* elements returned by the command, so if M is constant (for instance you always ask for the
* first ten elements with LIMIT) you can consider it O(log(N))
* @see #zrangeByScore(byte[], double, double)
* @see #zrangeByScore(byte[], double, double, int, int)
* @see #zrangeByScoreWithScores(byte[], double, double)
* @see #zrangeByScoreWithScores(byte[], double, double, int, int)
* @see #zcount(byte[], double, double)
* @param key
* @param min
* @param max
* @return Multi bulk reply specifically a list of elements in the specified score range.
*/
@Override
public Set zrangeByScoreWithScores(final byte[] key, final double min, final double max) {
checkIsInMultiOrPipeline();
client.zrangeByScoreWithScores(key, min, max);
return getTupledSet();
}
@Override
public Set zrangeByScoreWithScores(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zrangeByScoreWithScores(key, min, max);
return getTupledSet();
}
/**
* Return the all the elements in the sorted set at key with a score between min and max
* (including elements with score equal to min or max).
*
* The elements having the same score are returned sorted lexicographically as ASCII strings (this
* follows from a property of Redis sorted sets and does not involve further computation).
*
* Using the optional {@link #zrangeByScore(byte[], double, double, int, int) LIMIT} it's possible
* to get only a range of the matching elements in an SQL-alike way. Note that if offset is large
* the commands needs to traverse the list for offset elements and this adds up to the O(M)
* figure.
*
* The {@link #zcount(byte[], double, double) ZCOUNT} command is similar to
* {@link #zrangeByScore(byte[], double, double) ZRANGEBYSCORE} but instead of returning the
* actual elements in the specified interval, it just returns the number of matching elements.
*
* Exclusive intervals and infinity
*
* min and max can be -inf and +inf, so that you are not required to know what's the greatest or
* smallest element in order to take, for instance, elements "up to a given value".
*
* Also while the interval is for default closed (inclusive) it's possible to specify open
* intervals prefixing the score with a "(" character, so for instance:
*
* {@code ZRANGEBYSCORE zset (1.3 5}
*
* Will return all the values with score > 1.3 and <= 5, while for instance:
*
* {@code ZRANGEBYSCORE zset (5 (10}
*
* Will return all the values with score > 5 and < 10 (5 and 10 excluded).
*
* Time complexity:
*
* O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of
* elements returned by the command, so if M is constant (for instance you always ask for the
* first ten elements with LIMIT) you can consider it O(log(N))
* @see #zrangeByScore(byte[], double, double)
* @see #zrangeByScore(byte[], double, double, int, int)
* @see #zrangeByScoreWithScores(byte[], double, double)
* @see #zrangeByScoreWithScores(byte[], double, double, int, int)
* @see #zcount(byte[], double, double)
* @param key
* @param min
* @param max
* @param offset
* @param count
* @return Multi bulk reply specifically a list of elements in the specified score range.
*/
@Override
public Set zrangeByScoreWithScores(final byte[] key, final double min, final double max,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrangeByScoreWithScores(key, min, max, offset, count);
return getTupledSet();
}
@Override
public Set zrangeByScoreWithScores(final byte[] key, final byte[] min, final byte[] max,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrangeByScoreWithScores(key, min, max, offset, count);
return getTupledSet();
}
protected Set getTupledSet() {
List membersWithScores = client.getBinaryMultiBulkReply();
if (membersWithScores.isEmpty()) {
return Collections.emptySet();
}
Set set = new LinkedHashSet<>(membersWithScores.size() / 2, 1.0f);
Iterator iterator = membersWithScores.iterator();
while (iterator.hasNext()) {
set.add(new Tuple(iterator.next(), BuilderFactory.DOUBLE.build(iterator.next())));
}
return set;
}
@Override
public Set zrevrangeByScore(final byte[] key, final double max, final double min) {
checkIsInMultiOrPipeline();
client.zrevrangeByScore(key, max, min);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByScore(final byte[] key, final byte[] max, final byte[] min) {
checkIsInMultiOrPipeline();
client.zrevrangeByScore(key, max, min);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByScore(final byte[] key, final double max, final double min,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrevrangeByScore(key, max, min, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByScore(final byte[] key, final byte[] max, final byte[] min,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrevrangeByScore(key, max, min, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByScoreWithScores(final byte[] key, final double max, final double min) {
checkIsInMultiOrPipeline();
client.zrevrangeByScoreWithScores(key, max, min);
return getTupledSet();
}
@Override
public Set zrevrangeByScoreWithScores(final byte[] key, final double max,
final double min, final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrevrangeByScoreWithScores(key, max, min, offset, count);
return getTupledSet();
}
@Override
public Set zrevrangeByScoreWithScores(final byte[] key, final byte[] max, final byte[] min) {
checkIsInMultiOrPipeline();
client.zrevrangeByScoreWithScores(key, max, min);
return getTupledSet();
}
@Override
public Set zrevrangeByScoreWithScores(final byte[] key, final byte[] max,
final byte[] min, final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrevrangeByScoreWithScores(key, max, min, offset, count);
return getTupledSet();
}
/**
* Remove all elements in the sorted set at key with rank between start and end. Start and end are
* 0-based with rank 0 being the element with the lowest score. Both start and end can be negative
* numbers, where they indicate offsets starting at the element with the highest rank. For
* example: -1 is the element with the highest score, -2 the element with the second highest score
* and so forth.
*
* Time complexity: O(log(N))+O(M) with N being the number of elements in the sorted set
* and M the number of elements removed by the operation
* @param key
* @param start
* @param stop
* @return
*/
@Override
public Long zremrangeByRank(final byte[] key, final long start, final long stop) {
checkIsInMultiOrPipeline();
client.zremrangeByRank(key, start, stop);
return client.getIntegerReply();
}
/**
* Remove all the elements in the sorted set at key with a score between min and max (including
* elements with score equal to min or max).
*
* Time complexity:
*
* O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of
* elements removed by the operation
* @param key
* @param min
* @param max
* @return Integer reply, specifically the number of elements removed.
*/
@Override
public Long zremrangeByScore(final byte[] key, final double min, final double max) {
checkIsInMultiOrPipeline();
client.zremrangeByScore(key, min, max);
return client.getIntegerReply();
}
@Override
public Long zremrangeByScore(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zremrangeByScore(key, min, max);
return client.getIntegerReply();
}
/**
* Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at
* dstkey. It is mandatory to provide the number of input keys N, before passing the input keys
* and the other (optional) arguments.
*
* As the terms imply, the {@link #zinterstore(byte[], byte[]...)} ZINTERSTORE} command requires
* an element to be present in each of the given inputs to be inserted in the result. The {@link
* #zunionstore(byte[], byte[]...)} command inserts all elements across all inputs.
*
* Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means
* that the score of each element in the sorted set is first multiplied by this weight before
* being passed to the aggregation. When this option is not given, all weights default to 1.
*
* With the AGGREGATE option, it's possible to specify how the results of the union or
* intersection are aggregated. This option defaults to SUM, where the score of an element is
* summed across the inputs where it exists. When this option is set to be either MIN or MAX, the
* resulting set will contain the minimum or maximum score of an element across the inputs where
* it exists.
*
* Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input
* sorted sets, and M being the number of elements in the resulting sorted set
* @see #zunionstore(byte[], byte[]...)
* @see #zunionstore(byte[], ZParams, byte[]...)
* @see #zinterstore(byte[], byte[]...)
* @see #zinterstore(byte[], ZParams, byte[]...)
* @param dstkey
* @param sets
* @return Integer reply, specifically the number of elements in the sorted set at dstkey
*/
@Override
public Long zunionstore(final byte[] dstkey, final byte[]... sets) {
checkIsInMultiOrPipeline();
client.zunionstore(dstkey, sets);
return client.getIntegerReply();
}
/**
* Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at
* dstkey. It is mandatory to provide the number of input keys N, before passing the input keys
* and the other (optional) arguments.
*
* As the terms imply, the {@link #zinterstore(byte[], byte[]...) ZINTERSTORE} command requires an
* element to be present in each of the given inputs to be inserted in the result. The {@link
* #zunionstore(byte[], byte[]...) ZUNIONSTORE} command inserts all elements across all inputs.
*
* Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means
* that the score of each element in the sorted set is first multiplied by this weight before
* being passed to the aggregation. When this option is not given, all weights default to 1.
*
* With the AGGREGATE option, it's possible to specify how the results of the union or
* intersection are aggregated. This option defaults to SUM, where the score of an element is
* summed across the inputs where it exists. When this option is set to be either MIN or MAX, the
* resulting set will contain the minimum or maximum score of an element across the inputs where
* it exists.
*
* Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input
* sorted sets, and M being the number of elements in the resulting sorted set
* @see #zunionstore(byte[], byte[]...)
* @see #zunionstore(byte[], ZParams, byte[]...)
* @see #zinterstore(byte[], byte[]...)
* @see #zinterstore(byte[], ZParams, byte[]...)
* @param dstkey
* @param sets
* @param params
* @return Integer reply, specifically the number of elements in the sorted set at dstkey
*/
@Override
public Long zunionstore(final byte[] dstkey, final ZParams params, final byte[]... sets) {
checkIsInMultiOrPipeline();
client.zunionstore(dstkey, params, sets);
return client.getIntegerReply();
}
/**
* Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at
* dstkey. It is mandatory to provide the number of input keys N, before passing the input keys
* and the other (optional) arguments.
*
* As the terms imply, the {@link #zinterstore(byte[], byte[]...) ZINTERSTORE} command requires an
* element to be present in each of the given inputs to be inserted in the result. The {@link
* #zunionstore(byte[], byte[]...) ZUNIONSTORE} command inserts all elements across all inputs.
*
* Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means
* that the score of each element in the sorted set is first multiplied by this weight before
* being passed to the aggregation. When this option is not given, all weights default to 1.
*
* With the AGGREGATE option, it's possible to specify how the results of the union or
* intersection are aggregated. This option defaults to SUM, where the score of an element is
* summed across the inputs where it exists. When this option is set to be either MIN or MAX, the
* resulting set will contain the minimum or maximum score of an element across the inputs where
* it exists.
*
* Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input
* sorted sets, and M being the number of elements in the resulting sorted set
* @see #zunionstore(byte[], byte[]...)
* @see #zunionstore(byte[], ZParams, byte[]...)
* @see #zinterstore(byte[], byte[]...)
* @see #zinterstore(byte[], ZParams, byte[]...)
* @param dstkey
* @param sets
* @return Integer reply, specifically the number of elements in the sorted set at dstkey
*/
@Override
public Long zinterstore(final byte[] dstkey, final byte[]... sets) {
checkIsInMultiOrPipeline();
client.zinterstore(dstkey, sets);
return client.getIntegerReply();
}
/**
* Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at
* dstkey. It is mandatory to provide the number of input keys N, before passing the input keys
* and the other (optional) arguments.
*
* As the terms imply, the {@link #zinterstore(byte[], byte[]...) ZINTERSTORE} command requires an
* element to be present in each of the given inputs to be inserted in the result. The {@link
* #zunionstore(byte[], byte[]...) ZUNIONSTORE} command inserts all elements across all inputs.
*
* Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means
* that the score of each element in the sorted set is first multiplied by this weight before
* being passed to the aggregation. When this option is not given, all weights default to 1.
*
* With the AGGREGATE option, it's possible to specify how the results of the union or
* intersection are aggregated. This option defaults to SUM, where the score of an element is
* summed across the inputs where it exists. When this option is set to be either MIN or MAX, the
* resulting set will contain the minimum or maximum score of an element across the inputs where
* it exists.
*
* Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input
* sorted sets, and M being the number of elements in the resulting sorted set
* @see #zunionstore(byte[], byte[]...)
* @see #zunionstore(byte[], ZParams, byte[]...)
* @see #zinterstore(byte[], byte[]...)
* @see #zinterstore(byte[], ZParams, byte[]...)
* @param dstkey
* @param sets
* @param params
* @return Integer reply, specifically the number of elements in the sorted set at dstkey
*/
@Override
public Long zinterstore(final byte[] dstkey, final ZParams params, final byte[]... sets) {
checkIsInMultiOrPipeline();
client.zinterstore(dstkey, params, sets);
return client.getIntegerReply();
}
@Override
public Long zlexcount(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zlexcount(key, min, max);
return client.getIntegerReply();
}
@Override
public Set zrangeByLex(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zrangeByLex(key, min, max);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrangeByLex(final byte[] key, final byte[] min, final byte[] max,
final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrangeByLex(key, min, max, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByLex(final byte[] key, final byte[] max, final byte[] min) {
checkIsInMultiOrPipeline();
client.zrevrangeByLex(key, max, min);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Set zrevrangeByLex(final byte[] key, final byte[] max, final byte[] min, final int offset, final int count) {
checkIsInMultiOrPipeline();
client.zrevrangeByLex(key, max, min, offset, count);
return SetFromList.of(client.getBinaryMultiBulkReply());
}
@Override
public Long zremrangeByLex(final byte[] key, final byte[] min, final byte[] max) {
checkIsInMultiOrPipeline();
client.zremrangeByLex(key, min, max);
return client.getIntegerReply();
}
/**
* Synchronously save the DB on disk.
*
* Save the whole dataset on disk (this means that all the databases are saved, as well as keys
* with an EXPIRE set (the expire is preserved). The server hangs while the saving is not
* completed, no connection is served in the meanwhile. An OK code is returned when the DB was
* fully stored in disk.
*
* The background variant of this command is {@link #bgsave() BGSAVE} that is able to perform the
* saving in the background while the server continues serving other clients.
*
* @return Status code reply
*/
@Override
public String save() {
client.save();
return client.getStatusCodeReply();
}
/**
* Asynchronously save the DB on disk.
*
* Save the DB in background. The OK code is immediately returned. Redis forks, the parent
* continues to server the clients, the child saves the DB on disk then exit. A client my be able
* to check if the operation succeeded using the LASTSAVE command.
* @return Status code reply
*/
@Override
public String bgsave() {
client.bgsave();
return client.getStatusCodeReply();
}
/**
* Rewrite the append only file in background when it gets too big. Please for detailed
* information about the Redis Append Only File check the Append Only File Howto.
*
* BGREWRITEAOF rewrites the Append Only File in background when it gets too big. The Redis Append
* Only File is a Journal, so every operation modifying the dataset is logged in the Append Only
* File (and replayed at startup). This means that the Append Only File always grows. In order to
* rebuild its content the BGREWRITEAOF creates a new version of the append only file starting
* directly form the dataset in memory in order to guarantee the generation of the minimal number
* of commands needed to rebuild the database.
*
* @return Status code reply
*/
@Override
public String bgrewriteaof() {
client.bgrewriteaof();
return client.getStatusCodeReply();
}
/**
* Return the UNIX time stamp of the last successfully saving of the dataset on disk.
*
* Return the UNIX TIME of the last DB save executed with success. A client may check if a
* {@link #bgsave() BGSAVE} command succeeded reading the LASTSAVE value, then issuing a BGSAVE
* command and checking at regular intervals every N seconds if LASTSAVE changed.
* @return Integer reply, specifically an UNIX time stamp.
*/
@Override
public Long lastsave() {
client.lastsave();
return client.getIntegerReply();
}
/**
* Synchronously save the DB on disk, then shutdown the server.
*
* Stop all the clients, save the DB, then quit the server. This commands makes sure that the DB
* is switched off without the lost of any data. This is not guaranteed if the client uses simply
* {@link #save() SAVE} and then {@link #quit() QUIT} because other clients may alter the DB data
* between the two commands.
* @return Status code reply on error. On success nothing is returned since the server quits and
* the connection is closed.
*/
@Override
public String shutdown() {
client.shutdown();
String status;
try {
status = client.getStatusCodeReply();
} catch (JedisException ex) {
status = null;
}
return status;
}
/**
* Provide information and statistics about the server.
*
* The info command returns different information and statistics about the server in an format
* that's simple to parse by computers and easy to read by humans.
*
* Format of the returned String:
*
* All the fields are in the form field:value
*
*
* edis_version:0.07
* connected_clients:1
* connected_slaves:0
* used_memory:3187
* changes_since_last_save:0
* last_save_time:1237655729
* total_connections_received:1
* total_commands_processed:1
* uptime_in_seconds:25
* uptime_in_days:0
*
*
* Notes
*
* used_memory is returned in bytes, and is the total number of bytes allocated by the program
* using malloc.
*
* uptime_in_days is redundant since the uptime in seconds contains already the full uptime
* information, this field is only mainly present for humans.
*
* changes_since_last_save does not refer to the number of key changes, but to the number of
* operations that produced some kind of change in the dataset.
*
* @return Bulk reply
*/
@Override
public String info() {
client.info();
return client.getBulkReply();
}
@Override
public String info(final String section) {
client.info(section);
return client.getBulkReply();
}
/**
* Dump all the received requests in real time.
*
* MONITOR is a debugging command that outputs the whole sequence of commands received by the
* Redis server. is very handy in order to understand what is happening into the database. This
* command is used directly via telnet.
* @param jedisMonitor
*/
public void monitor(final JedisMonitor jedisMonitor) {
client.monitor();
client.getStatusCodeReply();
jedisMonitor.proceed(client);
}
/**
* Change the replication settings.
*
* The SLAVEOF command can change the replication settings of a slave on the fly. If a Redis
* server is already acting as slave, the command SLAVEOF NO ONE will turn off the replication
* turning the Redis server into a MASTER. In the proper form SLAVEOF hostname port will make the
* server a slave of the specific server listening at the specified hostname and port.
*
* If a server is already a slave of some master, SLAVEOF hostname port will stop the replication
* against the old server and start the synchronization against the new one discarding the old
* dataset.
*
* The form SLAVEOF no one will stop replication turning the server into a MASTER but will not
* discard the replication. So if the old master stop working it is possible to turn the slave
* into a master and set the application to use the new master in read/write. Later when the other
* Redis server will be fixed it can be configured in order to work as slave.
*
* @param host
* @param port
* @return Status code reply
*/
@Override
public String slaveof(final String host, final int port) {
client.slaveof(host, port);
return client.getStatusCodeReply();
}
@Override
public String slaveofNoOne() {
client.slaveofNoOne();
return client.getStatusCodeReply();
}
/**
* Retrieve the configuration of a running Redis server. Not all the configuration parameters are
* supported.
*
* CONFIG GET returns the current configuration parameters. This sub command only accepts a single
* argument, that is glob style pattern. All the configuration parameters matching this parameter
* are reported as a list of key-value pairs.
*
* Example:
*
*
* $ redis-cli config get '*'
* 1. "dbfilename"
* 2. "dump.rdb"
* 3. "requirepass"
* 4. (nil)
* 5. "masterauth"
* 6. (nil)
* 7. "maxmemory"
* 8. "0\n"
* 9. "appendfsync"
* 10. "everysec"
* 11. "save"
* 12. "3600 1 300 100 60 10000"
*
* $ redis-cli config get 'm*'
* 1. "masterauth"
* 2. (nil)
* 3. "maxmemory"
* 4. "0\n"
*
* @param pattern
* @return Bulk reply.
*/
@Override
public List configGet(final byte[] pattern) {
checkIsInMultiOrPipeline();
client.configGet(pattern);
return client.getBinaryMultiBulkReply();
}
/**
* Reset the stats returned by INFO
* @return
*/
@Override
public String configResetStat() {
checkIsInMultiOrPipeline();
client.configResetStat();
return client.getStatusCodeReply();
}
/**
* The CONFIG REWRITE command rewrites the redis.conf file the server was started with, applying
* the minimal changes needed to make it reflect the configuration currently used by the server,
* which may be different compared to the original one because of the use of the CONFIG SET command.
*
* The rewrite is performed in a very conservative way:
*
* - Comments and the overall structure of the original redis.conf are preserved as much as possible.
* - If an option already exists in the old redis.conf file, it will be rewritten at the same position (line number).
* - If an option was not already present, but it is set to its default value, it is not added by the rewrite process.
* - If an option was not already present, but it is set to a non-default value, it is appended at the end of the file.
* - Non used lines are blanked. For instance if you used to have multiple save directives, but
* the current configuration has fewer or none as you disabled RDB persistence, all the lines will be blanked.
*
*
* CONFIG REWRITE is also able to rewrite the configuration file from scratch if the original one
* no longer exists for some reason. However if the server was started without a configuration
* file at all, the CONFIG REWRITE will just return an error.
* @return OK when the configuration was rewritten properly. Otherwise an error is returned.
*/
@Override
public String configRewrite() {
checkIsInMultiOrPipeline();
client.configRewrite();
return client.getStatusCodeReply();
}
/**
* Alter the configuration of a running Redis server. Not all the configuration parameters are
* supported.
*
* The list of configuration parameters supported by CONFIG SET can be obtained issuing a
* {@link #configGet(byte[]) CONFIG GET *} command.
*
* The configuration set using CONFIG SET is immediately loaded by the Redis server that will
* start acting as specified starting from the next command.
*
* Parameters value format
*
* The value of the configuration parameter is the same as the one of the same parameter in the
* Redis configuration file, with the following exceptions:
*
*
* - The save parameter is a list of space-separated integers. Every pair of integers specify the
* time and number of changes limit to trigger a save. For instance the command CONFIG SET save
* "3600 10 60 10000" will configure the server to issue a background saving of the RDB file every
* 3600 seconds if there are at least 10 changes in the dataset, and every 60 seconds if there are
* at least 10000 changes. To completely disable automatic snapshots just set the parameter as an
* empty string.
*
- All the integer parameters representing memory are returned and accepted only using bytes
* as unit.
*
* @param parameter
* @param value
* @return Status code reply
*/
@Override
public byte[] configSet(final byte[] parameter, final byte[] value) {
checkIsInMultiOrPipeline();
client.configSet(parameter, value);
return client.getBinaryBulkReply();
}
public boolean isConnected() {
return client.isConnected();
}
@Override
public Long strlen(final byte[] key) {
checkIsInMultiOrPipeline();
client.strlen(key);
return client.getIntegerReply();
}
public void sync() {
client.sync();
}
@Override
public Long lpushx(final byte[] key, final byte[]... string) {
checkIsInMultiOrPipeline();
client.lpushx(key, string);
return client.getIntegerReply();
}
/**
* Undo a {@link #expire(byte[], int) expire} at turning the expire key into a normal key.
*
* Time complexity: O(1)
* @param key
* @return Integer reply, specifically: 1: the key is now persist. 0: the key is not persist (only
* happens when key not set).
*/
@Override
public Long persist(final byte[] key) {
checkIsInMultiOrPipeline();
client.persist(key);
return client.getIntegerReply();
}
@Override
public Long rpushx(final byte[] key, final byte[]... string) {
checkIsInMultiOrPipeline();
client.rpushx(key, string);
return client.getIntegerReply();
}
@Override
public byte[] echo(final byte[] string) {
checkIsInMultiOrPipeline();
client.echo(string);
return client.getBinaryBulkReply();
}
@Override
public Long linsert(final byte[] key, final ListPosition where, final byte[] pivot,
final byte[] value) {
checkIsInMultiOrPipeline();
client.linsert(key, where, pivot, value);
return client.getIntegerReply();
}
@Override
public String debug(final DebugParams params) {
client.debug(params);
return client.getStatusCodeReply();
}
public Client getClient() {
return client;
}
/**
* Pop a value from a list, push it to another list and return it; or block until one is available
* @param source
* @param destination
* @param timeout
* @return the element
*/
@Override
public byte[] brpoplpush(final byte[] source, final byte[] destination, final int timeout) {
checkIsInMultiOrPipeline();
client.brpoplpush(source, destination, timeout);
client.setTimeoutInfinite();
try {
return client.getBinaryBulkReply();
} finally {
client.rollbackTimeout();
}
}
/**
* Sets or clears the bit at offset in the string value stored at key
* @param key
* @param offset
* @param value
* @return
*/
@Override
public Boolean setbit(final byte[] key, final long offset, final boolean value) {
checkIsInMultiOrPipeline();
client.setbit(key, offset, value);
return client.getIntegerReply() == 1;
}
@Override
public Boolean setbit(final byte[] key, final long offset, final byte[] value) {
checkIsInMultiOrPipeline();
client.setbit(key, offset, value);
return client.getIntegerReply() == 1;
}
/**
* Returns the bit value at offset in the string value stored at key
* @param key
* @param offset
* @return
*/
@Override
public Boolean getbit(final byte[] key, final long offset) {
checkIsInMultiOrPipeline();
client.getbit(key, offset);
return client.getIntegerReply() == 1;
}
public Long bitpos(final byte[] key, final boolean value) {
return bitpos(key, value, new BitPosParams());
}
public Long bitpos(final byte[] key, final boolean value, final BitPosParams params) {
checkIsInMultiOrPipeline();
client.bitpos(key, value, params);
return client.getIntegerReply();
}
@Override
public Long setrange(final byte[] key, final long offset, final byte[] value) {
checkIsInMultiOrPipeline();
client.setrange(key, offset, value);
return client.getIntegerReply();
}
@Override
public byte[] getrange(final byte[] key, final long startOffset, final long endOffset) {
checkIsInMultiOrPipeline();
client.getrange(key, startOffset, endOffset);
return client.getBinaryBulkReply();
}
@Override
public Long publish(final byte[] channel, final byte[] message) {
checkIsInMultiOrPipeline();
client.publish(channel, message);
return client.getIntegerReply();
}
@Override
public void subscribe(BinaryJedisPubSub jedisPubSub, final byte[]... channels) {
client.setTimeoutInfinite();
try {
jedisPubSub.proceed(client, channels);
} finally {
client.rollbackTimeout();
}
}
@Override
public void psubscribe(BinaryJedisPubSub jedisPubSub, final byte[]... patterns) {
client.setTimeoutInfinite();
try {
jedisPubSub.proceedWithPatterns(client, patterns);
} finally {
client.rollbackTimeout();
}
}
@Override
public int getDB() {
return client.getDB();
}
/**
* Evaluates scripts using the Lua interpreter built into Redis starting from version 2.6.0.
*
* @param script
* @param keys
* @param args
* @return Script result
*/
@Override
public Object eval(final byte[] script, final List keys, final List args) {
return eval(script, toByteArray(keys.size()), getParamsWithBinary(keys, args));
}
protected static byte[][] getParamsWithBinary(List keys, List args) {
final int keyCount = keys.size();
final int argCount = args.size();
byte[][] params = new byte[keyCount + argCount][];
for (int i = 0; i < keyCount; i++)
params[i] = keys.get(i);
for (int i = 0; i < argCount; i++)
params[keyCount + i] = args.get(i);
return params;
}
@Override
public Object eval(final byte[] script, final byte[] keyCount, final byte[]... params) {
checkIsInMultiOrPipeline();
client.eval(script, keyCount, params);
client.setTimeoutInfinite();
try {
return client.getOne();
} finally {
client.rollbackTimeout();
}
}
@Override
public Object eval(final byte[] script, final int keyCount, final byte[]... params) {
return eval(script, toByteArray(keyCount), params);
}
@Override
public Object eval(final byte[] script) {
return eval(script, 0);
}
@Override
public Object evalsha(final byte[] sha1) {
return evalsha(sha1, 0);
}
@Override
public Object evalsha(final byte[] sha1, final List keys, final List args) {
return evalsha(sha1, keys.size(), getParamsWithBinary(keys, args));
}
@Override
public Object evalsha(final byte[] sha1, final int keyCount, final byte[]... params) {
checkIsInMultiOrPipeline();
client.evalsha(sha1, keyCount, params);
client.setTimeoutInfinite();
try {
return client.getOne();
} finally {
client.rollbackTimeout();
}
}
@Override
public String scriptFlush() {
client.scriptFlush();
return client.getStatusCodeReply();
}
public Long scriptExists(final byte[] sha1) {
byte[][] a = new byte[1][];
a[0] = sha1;
return scriptExists(a).get(0);
}
@Override
public List scriptExists(final byte[]... sha1) {
client.scriptExists(sha1);
return client.getIntegerMultiBulkReply();
}
@Override
public byte[] scriptLoad(final byte[] script) {
client.scriptLoad(script);
return client.getBinaryBulkReply();
}
@Override
public String scriptKill() {
client.scriptKill();
return client.getStatusCodeReply();
}
@Override
public String slowlogReset() {
client.slowlogReset();
return client.getBulkReply();
}
@Override
public Long slowlogLen() {
client.slowlogLen();
return client.getIntegerReply();
}
@Override
public List slowlogGetBinary() {
client.slowlogGet();
return client.getBinaryMultiBulkReply();
}
@Override
public List slowlogGetBinary(final long entries) {
client.slowlogGet(entries);
return client.getBinaryMultiBulkReply();
}
@Override
public Long objectRefcount(final byte[] key) {
client.objectRefcount(key);
return client.getIntegerReply();
}
@Override
public byte[] objectEncoding(final byte[] key) {
client.objectEncoding(key);
return client.getBinaryBulkReply();
}
@Override
public Long objectIdletime(final byte[] key) {
client.objectIdletime(key);
return client.getIntegerReply();
}
@Override
public List objectHelpBinary() {
client.objectHelp();
return client.getBinaryMultiBulkReply();
}
@Override
public Long objectFreq(final byte[] key) {
client.objectFreq(key);
return client.getIntegerReply();
}
@Override
public Long bitcount(final byte[] key) {
checkIsInMultiOrPipeline();
client.bitcount(key);
return client.getIntegerReply();
}
@Override
public Long bitcount(final byte[] key, final long start, final long end) {
checkIsInMultiOrPipeline();
client.bitcount(key, start, end);
return client.getIntegerReply();
}
@Override
public Long bitop(final BitOP op, final byte[] destKey, final byte[]... srcKeys) {
checkIsInMultiOrPipeline();
client.bitop(op, destKey, srcKeys);
return client.getIntegerReply();
}
@Override
public byte[] dump(final byte[] key) {
checkIsInMultiOrPipeline();
client.dump(key);
return client.getBinaryBulkReply();
}
@Override
public String restore(final byte[] key, final int ttl, final byte[] serializedValue) {
checkIsInMultiOrPipeline();
client.restore(key, ttl, serializedValue);
return client.getStatusCodeReply();
}
@Override
public String restoreReplace(final byte[] key, final int ttl, final byte[] serializedValue) {
checkIsInMultiOrPipeline();
client.restoreReplace(key, ttl, serializedValue);
return client.getStatusCodeReply();
}
/**
* Set a timeout on the specified key. After the timeout the key will be automatically deleted by
* the server. A key with an associated timeout is said to be volatile in Redis terminology.
*
* Volatile keys are stored on disk like the other keys, the timeout is persistent too like all the
* other aspects of the dataset. Saving a dataset containing expires and stopping the server does
* not stop the flow of time as Redis stores on disk the time when the key will no longer be
* available as Unix time, and not the remaining milliseconds.
*
* Since Redis 2.1.3 you can update the value of the timeout of a key already having an expire
* set. It is also possible to undo the expire at all turning the key into a normal key using the
* {@link #persist(byte[]) PERSIST} command.
*
* Time complexity: O(1)
* @see PEXPIRE Command
* @param key
* @param milliseconds
* @return Integer reply, specifically: 1: the timeout was set. 0: the timeout was not set since
* the key already has an associated timeout (this may happen only in Redis versions <
* 2.1.3, Redis >= 2.1.3 will happily update the timeout), or the key does not exist.
*/
@Override
public Long pexpire(final byte[] key, final long milliseconds) {
checkIsInMultiOrPipeline();
client.pexpire(key, milliseconds);
return client.getIntegerReply();
}
@Override
public Long pexpireAt(final byte[] key, final long millisecondsTimestamp) {
checkIsInMultiOrPipeline();
client.pexpireAt(key, millisecondsTimestamp);
return client.getIntegerReply();
}
@Override
public Long pttl(final byte[] key) {
checkIsInMultiOrPipeline();
client.pttl(key);
return client.getIntegerReply();
}
/**
* PSETEX works exactly like {@link #setex(byte[], int, byte[])} with the sole difference that the
* expire time is specified in milliseconds instead of seconds. Time complexity: O(1)
* @param key
* @param milliseconds
* @param value
* @return Status code reply
*/
@Override
public String psetex(final byte[] key, final long milliseconds, final byte[] value) {
checkIsInMultiOrPipeline();
client.psetex(key, milliseconds, value);
return client.getStatusCodeReply();
}
@Override
public byte[] memoryDoctorBinary() {
checkIsInMultiOrPipeline();
client.memoryDoctor();
return client.getBinaryBulkReply();
}
@Override
public byte[] aclWhoAmIBinary() {
checkIsInMultiOrPipeline();
client.aclWhoAmI();
return client.getBinaryBulkReply();
}
@Override
public byte[] aclGenPassBinary() {
checkIsInMultiOrPipeline();
client.aclGenPass();
return client.getBinaryBulkReply();
}
@Override
public List aclListBinary() {
checkIsInMultiOrPipeline();
client.aclList();
return client.getBinaryMultiBulkReply();
}
@Override
public List aclUsersBinary() {
checkIsInMultiOrPipeline();
client.aclUsers();
return client.getBinaryMultiBulkReply();
}
@Override
public AccessControlUser aclGetUser(byte[] name) {
checkIsInMultiOrPipeline();
client.aclGetUser(name);
return BuilderFactory.ACCESS_CONTROL_USER.build(client.getObjectMultiBulkReply());
}
@Override
public String aclSetUser(byte[] name) {
checkIsInMultiOrPipeline();
client.aclSetUser(name);
return client.getStatusCodeReply();
}
@Override
public String aclSetUser(byte[] name, byte[]... keys) {
checkIsInMultiOrPipeline();
client.aclSetUser(name, keys);
return client.getStatusCodeReply();
}
@Override
public Long aclDelUser(byte[] name) {
checkIsInMultiOrPipeline();
client.aclDelUser(name);
return client.getIntegerReply();
}
@Override
public List aclCatBinary() {
checkIsInMultiOrPipeline();
client.aclCat();
return client.getBinaryMultiBulkReply();
}
@Override
public List aclCat(byte[] category) {
checkIsInMultiOrPipeline();
client.aclCat(category);
return client.getBinaryMultiBulkReply();
}
@Override
public String clientKill(final byte[] ipPort) {
checkIsInMultiOrPipeline();
this.client.clientKill(ipPort);
return this.client.getStatusCodeReply();
}
@Override
public String clientKill(final String ip, final int port) {
checkIsInMultiOrPipeline();
this.client.clientKill(ip, port);
return this.client.getStatusCodeReply();
}
@Override
public Long clientKill(ClientKillParams params) {
checkIsInMultiOrPipeline();
this.client.clientKill(params);
return this.client.getIntegerReply();
}
@Override
public byte[] clientGetnameBinary() {
checkIsInMultiOrPipeline();
client.clientGetname();
return client.getBinaryBulkReply();
}
@Override
public byte[] clientListBinary() {
checkIsInMultiOrPipeline();
client.clientList();
return client.getBinaryBulkReply();
}
@Override
public String clientSetname(final byte[] name) {
checkIsInMultiOrPipeline();
client.clientSetname(name);
return client.getBulkReply();
}
public String clientPause(final long timeout) {
checkIsInMultiOrPipeline();
client.clientPause(timeout);
return client.getBulkReply();
}
public List time() {
checkIsInMultiOrPipeline();
client.time();
return client.getMultiBulkReply();
}
@Override
public String migrate(final String host, final int port, final byte[] key,
final int destinationDb, final int timeout) {
checkIsInMultiOrPipeline();
client.migrate(host, port, key, destinationDb, timeout);
return client.getStatusCodeReply();
}
@Override
public String migrate(final String host, final int port, final int destinationDB,
final int timeout, final MigrateParams params, final byte[]... keys) {
checkIsInMultiOrPipeline();
client.migrate(host, port, destinationDB, timeout, params, keys);
return client.getStatusCodeReply();
}
/**
* Syncrhonous replication of Redis as described here: http://antirez.com/news/66 Since Java
* Object class has implemented "wait" method, we cannot use it, so I had to change the name of
* the method. Sorry :S
*/
@Override
public Long waitReplicas(final int replicas, final long timeout) {
checkIsInMultiOrPipeline();
client.waitReplicas(replicas, timeout);
return client.getIntegerReply();
}
@Override
public Long pfadd(final byte[] key, final byte[]... elements) {
checkIsInMultiOrPipeline();
client.pfadd(key, elements);
return client.getIntegerReply();
}
@Override
public long pfcount(final byte[] key) {
checkIsInMultiOrPipeline();
client.pfcount(key);
return client.getIntegerReply();
}
@Override
public String pfmerge(final byte[] destkey, final byte[]... sourcekeys) {
checkIsInMultiOrPipeline();
client.pfmerge(destkey, sourcekeys);
return client.getStatusCodeReply();
}
@Override
public Long pfcount(final byte[]... keys) {
checkIsInMultiOrPipeline();
client.pfcount(keys);
return client.getIntegerReply();
}
public ScanResult scan(final byte[] cursor) {
return scan(cursor, new ScanParams());
}
public ScanResult scan(final byte[] cursor, final ScanParams params) {
checkIsInMultiOrPipeline();
client.scan(cursor, params);
List
遇到的问题
连接不上cluster，报错，
检查 cluster slots 查看redis集群信息，是否展示的是服务器ip，不可以是127.0.0.1
修改redis集群配置重启，ok