IBM T23 Kernel 2.6.x config

T23上有哪些硬件：
#lcpci -v

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02)
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities:[40] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-ebffffff
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1800 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1840 [size=32]
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=168
I/O behind bridge: 00002000-00006fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1860 [size=16]
Memory at 50001000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01)
Subsystem: IBM ThinkPad A/T/X Series
Flags: medium devsel, IRQ 11
I/O ports at 1880 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01)
Subsystem: IBM ThinkPad T23 (2647-4MG) or A30/A30p (2652/2653)
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05) (prog-if 00 [VGA])
Subsystem: IBM ThinkPad T23 (2647-4MG)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Memory at e0000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at e2000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [80] AGP version 2.0
02:00.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM ThinkPad T23 (2647-4MG)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: c4000000-c7fff000 (prefetchable)
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
16-bit legacy interface ports at 0001
02:00.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM ThinkPad T23 (2647-4MG)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
Memory window 0: f4000000-f7fff000 (prefetchable)
Memory window 1: c8000000-cbfff000 (prefetchable)
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
16-bit legacy interface ports at 0001
02:02.0 Network controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
Subsystem: Unknown device 17ab:8331
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 66, IRQ 11
Memory at c0210000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 6000 [size=64]
Capabilities: [dc] Power Management version 2

我编译内核的习惯是(2.6内核)：

#cd /usr/src
#tar jxvf linux-x.x.x.tar.bz2
#ln -s linux-x.x.x linux
#cd linux
#make menuconfig(如果在已编译过的内核源码环境下，需要make mrproper清理代码树，删除.o文件和dependencies lying。)
#make
#make modules_install
#cp arch/i386/boot/bzImage /boot/vmlinuz-x.x.x
#cp System.map /boot/System.map-x.x.x
#cp .config /boot/config-x.x.x

这里我采用目前最新的stable 2.6.20.4内核源码编译，附注：

1 上面的.config文件里加入了对ACPI controlled docking stations的支持，但是没有加入2631 DOCK Station的支持，他用的IDE接口是CMD 648,如果你需要，则将
->Device Drivers
-> ATA/ATAPI/MFM/RLL support
    -> ATA/ATAPI/MFM/RLL support
      ->Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
        ->PCI IDE chipset support
          ->Generic PCI bus-master DMA support
下面的CMD64{3|6|8|9} chipset support加进内核。
2631 Dock的USB接口一直没法使用，我还没找到解决的办法，如果以后问题解决了我会作出更新。
2 由于我没有PCMCIA设备，原Mini-PCI插槽的MODEM被替换成了Atheros Communications, Inc. AR5212 802.11abg无线网卡，上面的.config文件去掉了对PCMCIA和MODEM的支持，并加入了无线模块，但是没有添加任何无线网卡的驱动。这块Atheros无线网卡我后来用MadWIFI驱动。
The End.

[config文件]

#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.21

# Thu Apr 26 22:15:26 2007

#

CONFIG_X86_32=y

CONFIG_GENERIC_TIME=y

CONFIG_CLOCKSOURCE_WATCHDOG=y

CONFIG_GENERIC_CLOCKEVENTS=y

CONFIG_LOCKDEP_SUPPORT=y

CONFIG_STACKTRACE_SUPPORT=y

CONFIG_SEMAPHORE_SLEEPERS=y

CONFIG_X86=y

CONFIG_MMU=y

CONFIG_ZONE_DMA=y

CONFIG_GENERIC_ISA_DMA=y

CONFIG_GENERIC_IOMAP=y

CONFIG_GENERIC_BUG=y

CONFIG_GENERIC_HWEIGHT=y

CONFIG_ARCH_MAY_HAVE_PC_FDC=y

CONFIG_DMI=y

CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"



#

# Code maturity level options

#

CONFIG_EXPERIMENTAL=y

CONFIG_BROKEN_ON_SMP=y

CONFIG_INIT_ENV_ARG_LIMIT=32



#

# General setup

#

CONFIG_LOCALVERSION=""

# CONFIG_LOCALVERSION_AUTO is not set

CONFIG_SWAP=y

CONFIG_SYSVIPC=y

# CONFIG_IPC_NS is not set

CONFIG_SYSVIPC_SYSCTL=y

CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

# CONFIG_BSD_PROCESS_ACCT_V3 is not set

# CONFIG_TASKSTATS is not set

# CONFIG_UTS_NS is not set

# CONFIG_AUDIT is not set

# CONFIG_IKCONFIG is not set

# CONFIG_SYSFS_DEPRECATED is not set

# CONFIG_RELAY is not set

CONFIG_BLK_DEV_INITRD=y

CONFIG_INITRAMFS_SOURCE=""

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_SYSCTL=y

CONFIG_EMBEDDED=y

CONFIG_UID16=y

CONFIG_SYSCTL_SYSCALL=y

# CONFIG_KALLSYMS is not set

CONFIG_HOTPLUG=y

CONFIG_PRINTK=y

CONFIG_BUG=y

CONFIG_ELF_CORE=y

# CONFIG_BASE_FULL is not set

CONFIG_FUTEX=y

CONFIG_EPOLL=y

CONFIG_SHMEM=y

CONFIG_SLAB=y

CONFIG_VM_EVENT_COUNTERS=y

CONFIG_RT_MUTEXES=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=1

# CONFIG_SLOB is not set



#

# Loadable module support

#

CONFIG_MODULES=y

CONFIG_MODULE_UNLOAD=y

# CONFIG_MODULE_FORCE_UNLOAD is not set

# CONFIG_MODVERSIONS is not set

# CONFIG_MODULE_SRCVERSION_ALL is not set

CONFIG_KMOD=y



#

# Block layer

#

CONFIG_BLOCK=y

# CONFIG_LBD is not set

# CONFIG_BLK_DEV_IO_TRACE is not set

# CONFIG_LSF is not set



#

# IO Schedulers

#

CONFIG_IOSCHED_NOOP=y

# CONFIG_IOSCHED_AS is not set

# CONFIG_IOSCHED_DEADLINE is not set

CONFIG_IOSCHED_CFQ=y

# CONFIG_DEFAULT_AS is not set

# CONFIG_DEFAULT_DEADLINE is not set

CONFIG_DEFAULT_CFQ=y

# CONFIG_DEFAULT_NOOP is not set

CONFIG_DEFAULT_IOSCHED="cfq"



#

# Processor type and features

#

CONFIG_TICK_ONESHOT=y

CONFIG_NO_HZ=y

# CONFIG_HIGH_RES_TIMERS is not set

# CONFIG_SMP is not set

CONFIG_X86_PC=y

# CONFIG_X86_ELAN is not set

# CONFIG_X86_VOYAGER is not set

# CONFIG_X86_NUMAQ is not set

# CONFIG_X86_SUMMIT is not set

# CONFIG_X86_BIGSMP is not set

# CONFIG_X86_VISWS is not set

# CONFIG_X86_GENERICARCH is not set

# CONFIG_X86_ES7000 is not set

# CONFIG_PARAVIRT is not set

# CONFIG_M386 is not set

# CONFIG_M486 is not set

# CONFIG_M586 is not set

# CONFIG_M586TSC is not set

# CONFIG_M586MMX is not set

# CONFIG_M686 is not set

# CONFIG_MPENTIUMII is not set

CONFIG_MPENTIUMIII=y

# CONFIG_MPENTIUMM is not set

# CONFIG_MCORE2 is not set

# CONFIG_MPENTIUM4 is not set

# CONFIG_MK6 is not set

# CONFIG_MK7 is not set

# CONFIG_MK8 is not set

# CONFIG_MCRUSOE is not set

# CONFIG_MEFFICEON is not set

# CONFIG_MWINCHIPC6 is not set

# CONFIG_MWINCHIP2 is not set

# CONFIG_MWINCHIP3D is not set

# CONFIG_MGEODEGX1 is not set

# CONFIG_MGEODE_LX is not set

# CONFIG_MCYRIXIII is not set

# CONFIG_MVIAC3_2 is not set

CONFIG_X86_GENERIC=y

CONFIG_X86_CMPXCHG=y

CONFIG_X86_L1_CACHE_SHIFT=7

CONFIG_RWSEM_XCHGADD_ALGORITHM=y

# CONFIG_ARCH_HAS_ILOG2_U32 is not set

# CONFIG_ARCH_HAS_ILOG2_U64 is not set

CONFIG_GENERIC_CALIBRATE_DELAY=y

CONFIG_X86_WP_WORKS_OK=y

CONFIG_X86_INVLPG=y

CONFIG_X86_BSWAP=y

CONFIG_X86_POPAD_OK=y

CONFIG_X86_CMPXCHG64=y

CONFIG_X86_GOOD_APIC=y

CONFIG_X86_INTEL_USERCOPY=y

CONFIG_X86_USE_PPRO_CHECKSUM=y

CONFIG_X86_TSC=y

# CONFIG_HPET_TIMER is not set

# CONFIG_PREEMPT_NONE is not set

CONFIG_PREEMPT_VOLUNTARY=y

# CONFIG_PREEMPT is not set

# CONFIG_X86_UP_APIC is not set

# CONFIG_X86_MCE is not set

CONFIG_VM86=y

# CONFIG_TOSHIBA is not set

# CONFIG_I8K is not set

# CONFIG_X86_REBOOTFIXUPS is not set

CONFIG_MICROCODE=y

CONFIG_MICROCODE_OLD_INTERFACE=y

CONFIG_X86_MSR=y

CONFIG_X86_CPUID=y



#

# Firmware Drivers

#

# CONFIG_EDD is not set

# CONFIG_DELL_RBU is not set

# CONFIG_DCDBAS is not set

CONFIG_NOHIGHMEM=y

# CONFIG_HIGHMEM4G is not set

# CONFIG_HIGHMEM64G is not set

# CONFIG_VMSPLIT_3G is not set

CONFIG_VMSPLIT_3G_OPT=y

# CONFIG_VMSPLIT_2G is not set

# CONFIG_VMSPLIT_1G is not set

CONFIG_PAGE_OFFSET=0xB0000000

CONFIG_ARCH_FLATMEM_ENABLE=y

CONFIG_ARCH_SPARSEMEM_ENABLE=y

CONFIG_ARCH_SELECT_MEMORY_MODEL=y

CONFIG_ARCH_POPULATES_NODE_MAP=y

CONFIG_SELECT_MEMORY_MODEL=y

CONFIG_FLATMEM_MANUAL=y

# CONFIG_DISCONTIGMEM_MANUAL is not set

# CONFIG_SPARSEMEM_MANUAL is not set

CONFIG_FLATMEM=y

CONFIG_FLAT_NODE_MEM_MAP=y

CONFIG_SPARSEMEM_STATIC=y

CONFIG_SPLIT_PTLOCK_CPUS=4

# CONFIG_RESOURCES_64BIT is not set

CONFIG_ZONE_DMA_FLAG=1

# CONFIG_MATH_EMULATION is not set

CONFIG_MTRR=y

# CONFIG_EFI is not set

CONFIG_SECCOMP=y

# CONFIG_HZ_100 is not set

# CONFIG_HZ_250 is not set

# CONFIG_HZ_300 is not set

CONFIG_HZ_1000=y

CONFIG_HZ=1000

# CONFIG_KEXEC is not set

CONFIG_PHYSICAL_START=0x100000

# CONFIG_RELOCATABLE is not set

CONFIG_PHYSICAL_ALIGN=0x100000

# CONFIG_COMPAT_VDSO is not set



#

# Power management options (ACPI, APM)

#

CONFIG_PM=y

# CONFIG_PM_LEGACY is not set

# CONFIG_PM_DEBUG is not set

# CONFIG_PM_SYSFS_DEPRECATED is not set

# CONFIG_SOFTWARE_SUSPEND is not set



#

# ACPI (Advanced Configuration and Power Interface) Support

#

CONFIG_ACPI=y

CONFIG_ACPI_SLEEP=y

CONFIG_ACPI_SLEEP_PROC_FS=y

# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set

CONFIG_ACPI_PROCFS=y

CONFIG_ACPI_AC=y

CONFIG_ACPI_BATTERY=y

CONFIG_ACPI_BUTTON=y

# CONFIG_ACPI_VIDEO is not set

CONFIG_ACPI_FAN=y

# CONFIG_ACPI_DOCK is not set

CONFIG_ACPI_PROCESSOR=y

CONFIG_ACPI_THERMAL=y

# CONFIG_ACPI_ASUS is not set

CONFIG_ACPI_IBM=m

# CONFIG_ACPI_IBM_DOCK is not set

CONFIG_ACPI_IBM_BAY=y

# CONFIG_ACPI_TOSHIBA is not set

CONFIG_ACPI_BLACKLIST_YEAR=0

# CONFIG_ACPI_DEBUG is not set

CONFIG_ACPI_EC=y

CONFIG_ACPI_POWER=y

CONFIG_ACPI_SYSTEM=y

CONFIG_X86_PM_TIMER=y

# CONFIG_ACPI_CONTAINER is not set



#

# APM (Advanced Power Management) BIOS Support

#

# CONFIG_APM is not set



#

# CPU Frequency scaling

#

CONFIG_CPU_FREQ=y

CONFIG_CPU_FREQ_TABLE=y

# CONFIG_CPU_FREQ_DEBUG is not set

CONFIG_CPU_FREQ_STAT=y

# CONFIG_CPU_FREQ_STAT_DETAILS is not set

CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y

# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set

CONFIG_CPU_FREQ_GOV_PERFORMANCE=y

CONFIG_CPU_FREQ_GOV_POWERSAVE=y

CONFIG_CPU_FREQ_GOV_USERSPACE=y

# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set

# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set



#

# CPUFreq processor drivers

#

# CONFIG_X86_ACPI_CPUFREQ is not set

# CONFIG_X86_POWERNOW_K6 is not set

# CONFIG_X86_POWERNOW_K7 is not set

# CONFIG_X86_POWERNOW_K8 is not set

# CONFIG_X86_GX_SUSPMOD is not set

# CONFIG_X86_SPEEDSTEP_CENTRINO is not set

CONFIG_X86_SPEEDSTEP_ICH=y

# CONFIG_X86_SPEEDSTEP_SMI is not set

# CONFIG_X86_P4_CLOCKMOD is not set

# CONFIG_X86_CPUFREQ_NFORCE2 is not set

# CONFIG_X86_LONGRUN is not set

# CONFIG_X86_LONGHAUL is not set

# CONFIG_X86_E_POWERSAVER is not set



#

# shared options

#

CONFIG_X86_SPEEDSTEP_LIB=y

# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set



#

# Bus options (PCI, PCMCIA, EISA, MCA, ISA)

#

CONFIG_PCI=y

# CONFIG_PCI_GOBIOS is not set

# CONFIG_PCI_GOMMCONFIG is not set

# CONFIG_PCI_GODIRECT is not set

CONFIG_PCI_GOANY=y

CONFIG_PCI_BIOS=y

CONFIG_PCI_DIRECT=y

CONFIG_PCI_MMCONFIG=y

# CONFIG_PCIEPORTBUS is not set

CONFIG_ISA_DMA_API=y

CONFIG_ISA=y

# CONFIG_EISA is not set

# CONFIG_MCA is not set

# CONFIG_SCx200 is not set



#

# PCCARD (PCMCIA/CardBus) support

#

# CONFIG_PCCARD is not set



#

# PCI Hotplug Support

#

# CONFIG_HOTPLUG_PCI is not set



#

# Executable file formats

#

CONFIG_BINFMT_ELF=y

# CONFIG_BINFMT_AOUT is not set

CONFIG_BINFMT_MISC=y



#

# Networking

#

CONFIG_NET=y



#

# Networking options

#

# CONFIG_NETDEBUG is not set

CONFIG_PACKET=y

CONFIG_PACKET_MMAP=y

CONFIG_UNIX=y

CONFIG_XFRM=y

CONFIG_XFRM_USER=y

# CONFIG_XFRM_SUB_POLICY is not set

# CONFIG_XFRM_MIGRATE is not set

CONFIG_NET_KEY=y

# CONFIG_NET_KEY_MIGRATE is not set

CONFIG_INET=y

# CONFIG_IP_MULTICAST is not set

# CONFIG_IP_ADVANCED_ROUTER is not set

CONFIG_IP_FIB_HASH=y

# CONFIG_IP_PNP is not set

# CONFIG_NET_IPIP is not set

# CONFIG_NET_IPGRE is not set

# CONFIG_ARPD is not set

# CONFIG_SYN_COOKIES is not set

CONFIG_INET_AH=y

CONFIG_INET_ESP=y

CONFIG_INET_IPCOMP=y

CONFIG_INET_XFRM_TUNNEL=y

CONFIG_INET_TUNNEL=y

CONFIG_INET_XFRM_MODE_TRANSPORT=y

CONFIG_INET_XFRM_MODE_TUNNEL=y

CONFIG_INET_XFRM_MODE_BEET=y

CONFIG_INET_DIAG=y

CONFIG_INET_TCP_DIAG=y

# CONFIG_TCP_CONG_ADVANCED is not set

CONFIG_TCP_CONG_CUBIC=y

CONFIG_DEFAULT_TCP_CONG="cubic"

# CONFIG_TCP_MD5SIG is not set

# CONFIG_IPV6 is not set

# CONFIG_INET6_XFRM_TUNNEL is not set

# CONFIG_INET6_TUNNEL is not set

# CONFIG_NETWORK_SECMARK is not set

# CONFIG_NETFILTER is not set



#

# DCCP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_DCCP is not set



#

# SCTP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_SCTP is not set



#

# TIPC Configuration (EXPERIMENTAL)

#

# CONFIG_TIPC is not set

# CONFIG_ATM is not set

# CONFIG_BRIDGE is not set

# CONFIG_VLAN_8021Q is not set

# CONFIG_DECNET is not set

# CONFIG_LLC2 is not set

# CONFIG_IPX is not set

# CONFIG_ATALK is not set

# CONFIG_X25 is not set

# CONFIG_LAPB is not set

# CONFIG_ECONET is not set

# CONFIG_WAN_ROUTER is not set



#

# QoS and/or fair queueing

#

# CONFIG_NET_SCHED is not set



#

# Network testing

#

# CONFIG_NET_PKTGEN is not set

# CONFIG_HAMRADIO is not set

# CONFIG_IRDA is not set

# CONFIG_BT is not set

CONFIG_IEEE80211=m

# CONFIG_IEEE80211_DEBUG is not set

CONFIG_IEEE80211_CRYPT_WEP=m

CONFIG_IEEE80211_CRYPT_CCMP=m

CONFIG_IEEE80211_CRYPT_TKIP=m

CONFIG_IEEE80211_SOFTMAC=m

# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set

CONFIG_WIRELESS_EXT=y



#

# Device Drivers

#



#

# Generic Driver Options

#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

CONFIG_FW_LOADER=y

# CONFIG_SYS_HYPERVISOR is not set



#

# Connector - unified userspace <-> kernelspace linker

#

# CONFIG_CONNECTOR is not set



#

# Memory Technology Devices (MTD)

#

# CONFIG_MTD is not set



#

# Parallel port support

#

# CONFIG_PARPORT is not set



#

# Plug and Play support

#

CONFIG_PNP=y

# CONFIG_PNP_DEBUG is not set



#

# Protocols

#

# CONFIG_ISAPNP is not set

# CONFIG_PNPBIOS is not set

CONFIG_PNPACPI=y



#

# Block devices

#

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_DEV_XD is not set

# CONFIG_BLK_CPQ_DA is not set

# CONFIG_BLK_CPQ_CISS_DA is not set

# CONFIG_BLK_DEV_DAC960 is not set

# CONFIG_BLK_DEV_UMEM is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=m

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

# CONFIG_BLK_DEV_NBD is not set

# CONFIG_BLK_DEV_SX8 is not set

# CONFIG_BLK_DEV_UB is not set

CONFIG_BLK_DEV_RAM=m

CONFIG_BLK_DEV_RAM_COUNT=16

CONFIG_BLK_DEV_RAM_SIZE=4096

CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set



#

# Misc devices

#

# CONFIG_IBM_ASM is not set

# CONFIG_SGI_IOC4 is not set

# CONFIG_TIFM_CORE is not set

# CONFIG_MSI_LAPTOP is not set

# CONFIG_SONY_LAPTOP is not set



#

# ATA/ATAPI/MFM/RLL support

#

CONFIG_IDE=y

CONFIG_IDE_MAX_HWIFS=4

CONFIG_BLK_DEV_IDE=y



#

# Please see Documentation/ide.txt for help/info on IDE drives

#

# CONFIG_BLK_DEV_IDE_SATA is not set

# CONFIG_BLK_DEV_HD_IDE is not set

CONFIG_BLK_DEV_IDEDISK=y

# CONFIG_IDEDISK_MULTI_MODE is not set

# CONFIG_BLK_DEV_IDECD is not set

# CONFIG_BLK_DEV_IDETAPE is not set

# CONFIG_BLK_DEV_IDEFLOPPY is not set

# CONFIG_BLK_DEV_IDEACPI is not set

# CONFIG_IDE_TASK_IOCTL is not set



#

# IDE chipset support/bugfixes

#

CONFIG_IDE_GENERIC=y

# CONFIG_BLK_DEV_CMD640 is not set

# CONFIG_BLK_DEV_IDEPNP is not set

CONFIG_BLK_DEV_IDEPCI=y

# CONFIG_IDEPCI_SHARE_IRQ is not set

# CONFIG_BLK_DEV_OFFBOARD is not set

CONFIG_BLK_DEV_GENERIC=y

# CONFIG_BLK_DEV_OPTI621 is not set

# CONFIG_BLK_DEV_RZ1000 is not set

CONFIG_BLK_DEV_IDEDMA_PCI=y

# CONFIG_BLK_DEV_IDEDMA_FORCED is not set

# CONFIG_IDEDMA_ONLYDISK is not set

# CONFIG_BLK_DEV_AEC62XX is not set

# CONFIG_BLK_DEV_ALI15X3 is not set

# CONFIG_BLK_DEV_AMD74XX is not set

# CONFIG_BLK_DEV_ATIIXP is not set

# CONFIG_BLK_DEV_CMD64X is not set

# CONFIG_BLK_DEV_TRIFLEX is not set

# CONFIG_BLK_DEV_CY82C693 is not set

# CONFIG_BLK_DEV_CS5520 is not set

# CONFIG_BLK_DEV_CS5530 is not set

# CONFIG_BLK_DEV_CS5535 is not set

# CONFIG_BLK_DEV_HPT34X is not set

# CONFIG_BLK_DEV_HPT366 is not set

# CONFIG_BLK_DEV_JMICRON is not set

# CONFIG_BLK_DEV_SC1200 is not set

CONFIG_BLK_DEV_PIIX=y

# CONFIG_BLK_DEV_IT8213 is not set

# CONFIG_BLK_DEV_IT821X is not set

# CONFIG_BLK_DEV_NS87415 is not set

# CONFIG_BLK_DEV_PDC202XX_OLD is not set

# CONFIG_BLK_DEV_PDC202XX_NEW is not set

# CONFIG_BLK_DEV_SVWKS is not set

# CONFIG_BLK_DEV_SIIMAGE is not set

# CONFIG_BLK_DEV_SIS5513 is not set

# CONFIG_BLK_DEV_SLC90E66 is not set

# CONFIG_BLK_DEV_TRM290 is not set

# CONFIG_BLK_DEV_VIA82CXXX is not set

# CONFIG_BLK_DEV_TC86C001 is not set

# CONFIG_IDE_ARM is not set

# CONFIG_IDE_CHIPSETS is not set

CONFIG_BLK_DEV_IDEDMA=y

# CONFIG_IDEDMA_IVB is not set

# CONFIG_BLK_DEV_HD is not set



#

# SCSI device support

#

# CONFIG_RAID_ATTRS is not set

# CONFIG_SCSI is not set

# CONFIG_SCSI_NETLINK is not set



#

# Serial ATA (prod) and Parallel ATA (experimental) drivers

#

# CONFIG_ATA is not set



#

# Old CD-ROM drivers (not SCSI, not IDE)

#

# CONFIG_CD_NO_IDESCSI is not set



#

# Multi-device support (RAID and LVM)

#

# CONFIG_MD is not set



#

# Fusion MPT device support

#

# CONFIG_FUSION is not set



#

# IEEE 1394 (FireWire) support

#

# CONFIG_IEEE1394 is not set



#

# I2O device support

#

# CONFIG_I2O is not set



#

# Macintosh device drivers

#

# CONFIG_MAC_EMUMOUSEBTN is not set



#

# Network device support

#

CONFIG_NETDEVICES=y

# CONFIG_DUMMY is not set

# CONFIG_BONDING is not set

# CONFIG_EQUALIZER is not set

# CONFIG_TUN is not set

# CONFIG_NET_SB1000 is not set



#

# ARCnet devices

#

# CONFIG_ARCNET is not set



#

# PHY device support

#

# CONFIG_PHYLIB is not set



#

# Ethernet (10 or 100Mbit)

#

CONFIG_NET_ETHERNET=y

CONFIG_MII=m

# CONFIG_HAPPYMEAL is not set

# CONFIG_SUNGEM is not set

# CONFIG_CASSINI is not set

# CONFIG_NET_VENDOR_3COM is not set

# CONFIG_LANCE is not set

# CONFIG_NET_VENDOR_SMC is not set

# CONFIG_NET_VENDOR_RACAL is not set



#

# Tulip family network device support

#

# CONFIG_NET_TULIP is not set

# CONFIG_AT1700 is not set

# CONFIG_DEPCA is not set

# CONFIG_HP100 is not set

# CONFIG_NET_ISA is not set

CONFIG_NET_PCI=y

# CONFIG_PCNET32 is not set

# CONFIG_AMD8111_ETH is not set

# CONFIG_ADAPTEC_STARFIRE is not set

# CONFIG_AC3200 is not set

# CONFIG_APRICOT is not set

# CONFIG_B44 is not set

# CONFIG_FORCEDETH is not set

# CONFIG_CS89x0 is not set

# CONFIG_DGRS is not set

CONFIG_EEPRO100=m

# CONFIG_E100 is not set

# CONFIG_FEALNX is not set

# CONFIG_NATSEMI is not set

# CONFIG_NE2K_PCI is not set

# CONFIG_8139CP is not set

# CONFIG_8139TOO is not set

# CONFIG_SIS900 is not set

# CONFIG_EPIC100 is not set

# CONFIG_SUNDANCE is not set

# CONFIG_TLAN is not set

# CONFIG_VIA_RHINE is not set

# CONFIG_SC92031 is not set



#

# Ethernet (1000 Mbit)

#

# CONFIG_ACENIC is not set

# CONFIG_DL2K is not set

# CONFIG_E1000 is not set

# CONFIG_NS83820 is not set

# CONFIG_HAMACHI is not set

# CONFIG_YELLOWFIN is not set

# CONFIG_R8169 is not set

# CONFIG_SIS190 is not set

# CONFIG_SKGE is not set

# CONFIG_SKY2 is not set

# CONFIG_SK98LIN is not set

# CONFIG_VIA_VELOCITY is not set

# CONFIG_TIGON3 is not set

# CONFIG_BNX2 is not set

# CONFIG_QLA3XXX is not set

# CONFIG_ATL1 is not set



#

# Ethernet (10000 Mbit)

#

# CONFIG_CHELSIO_T1 is not set

# CONFIG_CHELSIO_T3 is not set

# CONFIG_IXGB is not set

# CONFIG_S2IO is not set

# CONFIG_MYRI10GE is not set

# CONFIG_NETXEN_NIC is not set



#

# Token Ring devices

#

# CONFIG_TR is not set



#

# Wireless LAN (non-hamradio)

#

CONFIG_NET_RADIO=y

# CONFIG_NET_WIRELESS_RTNETLINK is not set



#

# Obsolete Wireless cards support (pre-802.11)

#

# CONFIG_STRIP is not set

# CONFIG_ARLAN is not set

# CONFIG_WAVELAN is not set



#

# Wireless 802.11b ISA/PCI cards support

#

# CONFIG_IPW2100 is not set

# CONFIG_IPW2200 is not set

# CONFIG_AIRO is not set

# CONFIG_HERMES is not set

# CONFIG_ATMEL is not set



#

# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support

#

# CONFIG_PRISM54 is not set

# CONFIG_USB_ZD1201 is not set

# CONFIG_HOSTAP is not set

# CONFIG_BCM43XX is not set

# CONFIG_ZD1211RW is not set

CONFIG_NET_WIRELESS=y



#

# Wan interfaces

#

# CONFIG_WAN is not set

# CONFIG_FDDI is not set

# CONFIG_HIPPI is not set

# CONFIG_PPP is not set

# CONFIG_SLIP is not set

# CONFIG_SHAPER is not set

# CONFIG_NETCONSOLE is not set

# CONFIG_NETPOLL is not set

# CONFIG_NET_POLL_CONTROLLER is not set



#

# ISDN subsystem

#

# CONFIG_ISDN is not set



#

# Telephony Support

#

# CONFIG_PHONE is not set



#

# Input device support

#

CONFIG_INPUT=y

# CONFIG_INPUT_FF_MEMLESS is not set



#

# Userland interfaces

#

CONFIG_INPUT_MOUSEDEV=y

CONFIG_INPUT_MOUSEDEV_PSAUX=y

CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400

CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050

# CONFIG_INPUT_JOYDEV is not set

# CONFIG_INPUT_TSDEV is not set

# CONFIG_INPUT_EVDEV is not set

# CONFIG_INPUT_EVBUG is not set



#

# Input Device Drivers

#

CONFIG_INPUT_KEYBOARD=y

CONFIG_KEYBOARD_ATKBD=y

# CONFIG_KEYBOARD_SUNKBD is not set

# CONFIG_KEYBOARD_LKKBD is not set

# CONFIG_KEYBOARD_XTKBD is not set

# CONFIG_KEYBOARD_NEWTON is not set

# CONFIG_KEYBOARD_STOWAWAY is not set

CONFIG_INPUT_MOUSE=y

CONFIG_MOUSE_PS2=y

# CONFIG_MOUSE_SERIAL is not set

# CONFIG_MOUSE_INPORT is not set

# CONFIG_MOUSE_LOGIBM is not set

# CONFIG_MOUSE_PC110PAD is not set

# CONFIG_MOUSE_VSXXXAA is not set

# CONFIG_INPUT_JOYSTICK is not set

# CONFIG_INPUT_TOUCHSCREEN is not set

# CONFIG_INPUT_MISC is not set



#

# Hardware I/O ports

#

CONFIG_SERIO=y

CONFIG_SERIO_I8042=y

# CONFIG_SERIO_SERPORT is not set

# CONFIG_SERIO_CT82C710 is not set

# CONFIG_SERIO_PCIPS2 is not set

CONFIG_SERIO_LIBPS2=y

# CONFIG_SERIO_RAW is not set

# CONFIG_GAMEPORT is not set



#

# Character devices

#

CONFIG_VT=y

CONFIG_VT_CONSOLE=y

CONFIG_HW_CONSOLE=y

# CONFIG_VT_HW_CONSOLE_BINDING is not set

# CONFIG_SERIAL_NONSTANDARD is not set



#

# Serial drivers

#

# CONFIG_SERIAL_8250 is not set



#

# Non-8250 serial port support

#

# CONFIG_SERIAL_JSM is not set

CONFIG_UNIX98_PTYS=y

# CONFIG_LEGACY_PTYS is not set



#

# IPMI

#

# CONFIG_IPMI_HANDLER is not set



#

# Watchdog Cards

#

# CONFIG_WATCHDOG is not set

# CONFIG_HW_RANDOM is not set

CONFIG_NVRAM=m

CONFIG_RTC=y

# CONFIG_DTLK is not set

# CONFIG_R3964 is not set

# CONFIG_APPLICOM is not set

# CONFIG_SONYPI is not set

CONFIG_AGP=y

# CONFIG_AGP_ALI is not set

# CONFIG_AGP_ATI is not set

# CONFIG_AGP_AMD is not set

# CONFIG_AGP_AMD64 is not set

CONFIG_AGP_INTEL=y

# CONFIG_AGP_NVIDIA is not set

# CONFIG_AGP_SIS is not set

# CONFIG_AGP_SWORKS is not set

# CONFIG_AGP_VIA is not set

# CONFIG_AGP_EFFICEON is not set

CONFIG_DRM=y

# CONFIG_DRM_TDFX is not set

# CONFIG_DRM_R128 is not set

# CONFIG_DRM_RADEON is not set

# CONFIG_DRM_I810 is not set

# CONFIG_DRM_I830 is not set

# CONFIG_DRM_I915 is not set

# CONFIG_DRM_MGA is not set

# CONFIG_DRM_SIS is not set

# CONFIG_DRM_VIA is not set

CONFIG_DRM_SAVAGE=m

# CONFIG_MWAVE is not set

# CONFIG_PC8736x_GPIO is not set

# CONFIG_NSC_GPIO is not set

# CONFIG_CS5535_GPIO is not set

# CONFIG_RAW_DRIVER is not set

# CONFIG_HPET is not set

# CONFIG_HANGCHECK_TIMER is not set



#

# TPM devices

#

# CONFIG_TCG_TPM is not set

# CONFIG_TELCLOCK is not set



#

# I2C support

#

# CONFIG_I2C is not set



#

# SPI support

#

# CONFIG_SPI is not set

# CONFIG_SPI_MASTER is not set



#

# Dallas's 1-wire bus

#

# CONFIG_W1 is not set



#

# Hardware Monitoring support

#

# CONFIG_HWMON is not set

# CONFIG_HWMON_VID is not set



#

# Multifunction device drivers

#

# CONFIG_MFD_SM501 is not set



#

# Multimedia devices

#

# CONFIG_VIDEO_DEV is not set



#

# Digital Video Broadcasting Devices

#

# CONFIG_DVB is not set

# CONFIG_USB_DABUSB is not set



#

# Graphics support

#

CONFIG_BACKLIGHT_LCD_SUPPORT=y

CONFIG_BACKLIGHT_CLASS_DEVICE=y

CONFIG_LCD_CLASS_DEVICE=y

# CONFIG_BACKLIGHT_PROGEAR is not set

CONFIG_FB=y

CONFIG_FIRMWARE_EDID=y

# CONFIG_FB_DDC is not set

CONFIG_FB_CFB_FILLRECT=y

CONFIG_FB_CFB_COPYAREA=y

CONFIG_FB_CFB_IMAGEBLIT=y

# CONFIG_FB_SVGALIB is not set

# CONFIG_FB_MACMODES is not set

# CONFIG_FB_BACKLIGHT is not set

CONFIG_FB_MODE_HELPERS=y

# CONFIG_FB_TILEBLITTING is not set



#

# Frame buffer hardware drivers

#

# CONFIG_FB_CIRRUS is not set

# CONFIG_FB_PM2 is not set

# CONFIG_FB_CYBER2000 is not set

# CONFIG_FB_ARC is not set

# CONFIG_FB_ASILIANT is not set

# CONFIG_FB_IMSTT is not set

# CONFIG_FB_VGA16 is not set

CONFIG_FB_VESA=y

# CONFIG_FB_HGA is not set

# CONFIG_FB_S1D13XXX is not set

# CONFIG_FB_NVIDIA is not set

# CONFIG_FB_RIVA is not set

# CONFIG_FB_I810 is not set

# CONFIG_FB_INTEL is not set

# CONFIG_FB_MATROX is not set

# CONFIG_FB_RADEON is not set

# CONFIG_FB_ATY128 is not set

# CONFIG_FB_ATY is not set

# CONFIG_FB_S3 is not set

# CONFIG_FB_SAVAGE is not set

# CONFIG_FB_SIS is not set

# CONFIG_FB_NEOMAGIC is not set

# CONFIG_FB_KYRO is not set

# CONFIG_FB_3DFX is not set

# CONFIG_FB_VOODOO1 is not set

# CONFIG_FB_CYBLA is not set

# CONFIG_FB_TRIDENT is not set

# CONFIG_FB_GEODE is not set

# CONFIG_FB_VIRTUAL is not set



#

# Console display driver support

#

CONFIG_VGA_CONSOLE=y

# CONFIG_VGACON_SOFT_SCROLLBACK is not set

CONFIG_VIDEO_SELECT=y

# CONFIG_MDA_CONSOLE is not set

CONFIG_DUMMY_CONSOLE=y

CONFIG_FRAMEBUFFER_CONSOLE=y

# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set

# CONFIG_FONTS is not set

CONFIG_FONT_8x8=y

CONFIG_FONT_8x16=y



#

# Logo configuration

#

# CONFIG_LOGO is not set



#

# Sound

#

CONFIG_SOUND=m



#

# Advanced Linux Sound Architecture

#

CONFIG_SND=m

CONFIG_SND_TIMER=m

CONFIG_SND_PCM=m

CONFIG_SND_SEQUENCER=m

CONFIG_SND_SEQ_DUMMY=m

CONFIG_SND_OSSEMUL=y

CONFIG_SND_MIXER_OSS=m

CONFIG_SND_PCM_OSS=m

CONFIG_SND_PCM_OSS_PLUGINS=y

CONFIG_SND_SEQUENCER_OSS=y

CONFIG_SND_RTCTIMER=m

CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y

# CONFIG_SND_DYNAMIC_MINORS is not set

CONFIG_SND_SUPPORT_OLD_API=y

# CONFIG_SND_VERBOSE_PROCFS is not set

# CONFIG_SND_VERBOSE_PRINTK is not set

# CONFIG_SND_DEBUG is not set



#

# Generic devices

#

CONFIG_SND_AC97_CODEC=m

# CONFIG_SND_DUMMY is not set

# CONFIG_SND_VIRMIDI is not set

# CONFIG_SND_MTPAV is not set

# CONFIG_SND_SERIAL_U16550 is not set

# CONFIG_SND_MPU401 is not set



#

# ISA devices

#

# CONFIG_SND_ADLIB is not set

# CONFIG_SND_AD1816A is not set

# CONFIG_SND_AD1848 is not set

# CONFIG_SND_ALS100 is not set

# CONFIG_SND_AZT2320 is not set

# CONFIG_SND_CMI8330 is not set

# CONFIG_SND_CS4231 is not set

# CONFIG_SND_CS4232 is not set

# CONFIG_SND_CS4236 is not set

# CONFIG_SND_DT019X is not set

# CONFIG_SND_ES968 is not set

# CONFIG_SND_ES1688 is not set

# CONFIG_SND_ES18XX is not set

# CONFIG_SND_GUSCLASSIC is not set

# CONFIG_SND_GUSEXTREME is not set

# CONFIG_SND_GUSMAX is not set

# CONFIG_SND_INTERWAVE is not set

# CONFIG_SND_INTERWAVE_STB is not set

# CONFIG_SND_OPL3SA2 is not set

# CONFIG_SND_OPTI92X_AD1848 is not set

# CONFIG_SND_OPTI92X_CS4231 is not set

# CONFIG_SND_OPTI93X is not set

# CONFIG_SND_MIRO is not set

# CONFIG_SND_SB8 is not set

# CONFIG_SND_SB16 is not set

# CONFIG_SND_SBAWE is not set

# CONFIG_SND_SGALAXY is not set

# CONFIG_SND_SSCAPE is not set

# CONFIG_SND_WAVEFRONT is not set



#

# PCI devices

#

# CONFIG_SND_AD1889 is not set

# CONFIG_SND_ALS300 is not set

# CONFIG_SND_ALS4000 is not set

# CONFIG_SND_ALI5451 is not set

# CONFIG_SND_ATIIXP is not set

# CONFIG_SND_ATIIXP_MODEM is not set

# CONFIG_SND_AU8810 is not set

# CONFIG_SND_AU8820 is not set

# CONFIG_SND_AU8830 is not set

# CONFIG_SND_AZT3328 is not set

# CONFIG_SND_BT87X is not set

# CONFIG_SND_CA0106 is not set

# CONFIG_SND_CMIPCI is not set

# CONFIG_SND_CS4281 is not set

# CONFIG_SND_CS46XX is not set

# CONFIG_SND_CS5535AUDIO is not set

# CONFIG_SND_DARLA20 is not set

# CONFIG_SND_GINA20 is not set

# CONFIG_SND_LAYLA20 is not set

# CONFIG_SND_DARLA24 is not set

# CONFIG_SND_GINA24 is not set

# CONFIG_SND_LAYLA24 is not set

# CONFIG_SND_MONA is not set

# CONFIG_SND_MIA is not set

# CONFIG_SND_ECHO3G is not set

# CONFIG_SND_INDIGO is not set

# CONFIG_SND_INDIGOIO is not set

# CONFIG_SND_INDIGODJ is not set

# CONFIG_SND_EMU10K1 is not set

# CONFIG_SND_EMU10K1X is not set

# CONFIG_SND_ENS1370 is not set

# CONFIG_SND_ENS1371 is not set

# CONFIG_SND_ES1938 is not set

# CONFIG_SND_ES1968 is not set

# CONFIG_SND_FM801 is not set

# CONFIG_SND_HDA_INTEL is not set

# CONFIG_SND_HDSP is not set

# CONFIG_SND_HDSPM is not set

# CONFIG_SND_ICE1712 is not set

# CONFIG_SND_ICE1724 is not set

CONFIG_SND_INTEL8X0=m

# CONFIG_SND_INTEL8X0M is not set

# CONFIG_SND_KORG1212 is not set

# CONFIG_SND_MAESTRO3 is not set

# CONFIG_SND_MIXART is not set

# CONFIG_SND_NM256 is not set

# CONFIG_SND_PCXHR is not set

# CONFIG_SND_RIPTIDE is not set

# CONFIG_SND_RME32 is not set

# CONFIG_SND_RME96 is not set

# CONFIG_SND_RME9652 is not set

# CONFIG_SND_SONICVIBES is not set

# CONFIG_SND_TRIDENT is not set

# CONFIG_SND_VIA82XX is not set

# CONFIG_SND_VIA82XX_MODEM is not set

# CONFIG_SND_VX222 is not set

# CONFIG_SND_YMFPCI is not set

# CONFIG_SND_AC97_POWER_SAVE is not set



#

# USB devices

#

# CONFIG_SND_USB_AUDIO is not set

# CONFIG_SND_USB_USX2Y is not set



#

# SoC audio support

#

# CONFIG_SND_SOC is not set



#

# Open Sound System

#

# CONFIG_SOUND_PRIME is not set

CONFIG_AC97_BUS=m



#

# HID Devices

#

CONFIG_HID=y

# CONFIG_HID_DEBUG is not set



#

# USB support

#

CONFIG_USB_ARCH_HAS_HCD=y

CONFIG_USB_ARCH_HAS_OHCI=y

CONFIG_USB_ARCH_HAS_EHCI=y

CONFIG_USB=m

# CONFIG_USB_DEBUG is not set



#

# Miscellaneous USB options

#

# CONFIG_USB_DEVICEFS is not set

# CONFIG_USB_DYNAMIC_MINORS is not set

# CONFIG_USB_SUSPEND is not set

# CONFIG_USB_OTG is not set



#

# USB Host Controller Drivers

#

# CONFIG_USB_EHCI_HCD is not set

# CONFIG_USB_ISP116X_HCD is not set

# CONFIG_USB_OHCI_HCD is not set

CONFIG_USB_UHCI_HCD=m

# CONFIG_USB_SL811_HCD is not set



#

# USB Device Class drivers

#

# CONFIG_USB_ACM is not set

# CONFIG_USB_PRINTER is not set



#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

#



#

# may also be needed; see USB_STORAGE Help for more information

#

# CONFIG_USB_LIBUSUAL is not set



#

# USB Input Devices

#

CONFIG_USB_HID=m

# CONFIG_USB_HIDINPUT_POWERBOOK is not set

# CONFIG_HID_FF is not set

CONFIG_USB_HIDDEV=y



#

# USB HID Boot Protocol drivers

#

# CONFIG_USB_KBD is not set

# CONFIG_USB_MOUSE is not set

# CONFIG_USB_AIPTEK is not set

# CONFIG_USB_WACOM is not set

# CONFIG_USB_ACECAD is not set

# CONFIG_USB_KBTAB is not set

# CONFIG_USB_POWERMATE is not set

# CONFIG_USB_TOUCHSCREEN is not set

# CONFIG_USB_YEALINK is not set

# CONFIG_USB_XPAD is not set

# CONFIG_USB_ATI_REMOTE is not set

# CONFIG_USB_ATI_REMOTE2 is not set

# CONFIG_USB_KEYSPAN_REMOTE is not set

# CONFIG_USB_APPLETOUCH is not set

# CONFIG_USB_GTCO is not set



#

# USB Imaging devices

#

# CONFIG_USB_MDC800 is not set



#

# USB Network Adapters

#

# CONFIG_USB_CATC is not set

# CONFIG_USB_KAWETH is not set

# CONFIG_USB_PEGASUS is not set

# CONFIG_USB_RTL8150 is not set

# CONFIG_USB_USBNET_MII is not set

# CONFIG_USB_USBNET is not set

# CONFIG_USB_MON is not set



#

# USB port drivers

#



#

# USB Serial Converter support

#

# CONFIG_USB_SERIAL is not set



#

# USB Miscellaneous drivers

#

# CONFIG_USB_EMI62 is not set

# CONFIG_USB_EMI26 is not set

# CONFIG_USB_ADUTUX is not set

# CONFIG_USB_AUERSWALD is not set

# CONFIG_USB_RIO500 is not set

# CONFIG_USB_LEGOTOWER is not set

# CONFIG_USB_LCD is not set

# CONFIG_USB_BERRY_CHARGE is not set

# CONFIG_USB_LED is not set

# CONFIG_USB_CYPRESS_CY7C63 is not set

# CONFIG_USB_CYTHERM is not set

# CONFIG_USB_PHIDGET is not set

# CONFIG_USB_IDMOUSE is not set

# CONFIG_USB_FTDI_ELAN is not set

# CONFIG_USB_APPLEDISPLAY is not set

# CONFIG_USB_LD is not set

# CONFIG_USB_TRANCEVIBRATOR is not set

# CONFIG_USB_IOWARRIOR is not set



#

# USB DSL modem support

#



#

# USB Gadget Support

#

# CONFIG_USB_GADGET is not set



#

# MMC/SD Card support

#

# CONFIG_MMC is not set



#

# LED devices

#

# CONFIG_NEW_LEDS is not set



#

# LED drivers

#



#

# LED Triggers

#



#

# InfiniBand support

#

# CONFIG_INFINIBAND is not set



#

# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)

#

# CONFIG_EDAC is not set



#

# Real Time Clock

#

# CONFIG_RTC_CLASS is not set



#

# DMA Engine support

#

CONFIG_DMA_ENGINE=y



#

# DMA Clients

#

CONFIG_NET_DMA=y



#

# DMA Devices

#

# CONFIG_INTEL_IOATDMA is not set



#

# Auxiliary Display support

#



#

# Virtualization

#

# CONFIG_KVM is not set



#

# File systems

#

CONFIG_EXT2_FS=m

# CONFIG_EXT2_FS_XATTR is not set

# CONFIG_EXT2_FS_XIP is not set

CONFIG_EXT3_FS=m

# CONFIG_EXT3_FS_XATTR is not set

# CONFIG_EXT4DEV_FS is not set

CONFIG_JBD=m

# CONFIG_JBD_DEBUG is not set

CONFIG_REISERFS_FS=y

# CONFIG_REISERFS_CHECK is not set

# CONFIG_REISERFS_PROC_INFO is not set

# CONFIG_REISERFS_FS_XATTR is not set

# CONFIG_JFS_FS is not set

# CONFIG_FS_POSIX_ACL is not set

# CONFIG_XFS_FS is not set

# CONFIG_GFS2_FS is not set

# CONFIG_OCFS2_FS is not set

# CONFIG_MINIX_FS is not set

# CONFIG_ROMFS_FS is not set

CONFIG_INOTIFY=y

CONFIG_INOTIFY_USER=y

# CONFIG_QUOTA is not set

CONFIG_DNOTIFY=y

# CONFIG_AUTOFS_FS is not set

# CONFIG_AUTOFS4_FS is not set

# CONFIG_FUSE_FS is not set



#

# CD-ROM/DVD Filesystems

#

CONFIG_ISO9660_FS=m

CONFIG_JOLIET=y

CONFIG_ZISOFS=y

# CONFIG_UDF_FS is not set



#

# DOS/FAT/NT Filesystems

#

CONFIG_FAT_FS=m

# CONFIG_MSDOS_FS is not set

CONFIG_VFAT_FS=m

CONFIG_FAT_DEFAULT_CODEPAGE=936

CONFIG_FAT_DEFAULT_IOCHARSET="cp936"

CONFIG_NTFS_FS=m

# CONFIG_NTFS_DEBUG is not set

# CONFIG_NTFS_RW is not set



#

# Pseudo filesystems

#

CONFIG_PROC_FS=y

CONFIG_PROC_KCORE=y

CONFIG_PROC_SYSCTL=y

CONFIG_SYSFS=y

CONFIG_TMPFS=y

# CONFIG_TMPFS_POSIX_ACL is not set

# CONFIG_HUGETLBFS is not set

# CONFIG_HUGETLB_PAGE is not set

CONFIG_RAMFS=y

# CONFIG_CONFIGFS_FS is not set



#

# Miscellaneous filesystems

#

# CONFIG_ADFS_FS is not set

# CONFIG_AFFS_FS is not set

# CONFIG_HFS_FS is not set

# CONFIG_HFSPLUS_FS is not set

# CONFIG_BEFS_FS is not set

# CONFIG_BFS_FS is not set

# CONFIG_EFS_FS is not set

# CONFIG_CRAMFS is not set

# CONFIG_VXFS_FS is not set

# CONFIG_HPFS_FS is not set

# CONFIG_QNX4FS_FS is not set

# CONFIG_SYSV_FS is not set

# CONFIG_UFS_FS is not set



#

# Network File Systems

#

# CONFIG_NFS_FS is not set

# CONFIG_NFSD is not set

# CONFIG_SMB_FS is not set

CONFIG_CIFS=m

# CONFIG_CIFS_STATS is not set

# CONFIG_CIFS_WEAK_PW_HASH is not set

# CONFIG_CIFS_XATTR is not set

# CONFIG_CIFS_DEBUG2 is not set

# CONFIG_CIFS_EXPERIMENTAL is not set

# CONFIG_NCP_FS is not set

# CONFIG_CODA_FS is not set

# CONFIG_AFS_FS is not set

# CONFIG_9P_FS is not set



#

# Partition Types

#

# CONFIG_PARTITION_ADVANCED is not set

CONFIG_MSDOS_PARTITION=y



#

# Native Language Support

#

CONFIG_NLS=y

CONFIG_NLS_DEFAULT="cp936"

CONFIG_NLS_CODEPAGE_437=m

# CONFIG_NLS_CODEPAGE_737 is not set

# CONFIG_NLS_CODEPAGE_775 is not set

# CONFIG_NLS_CODEPAGE_850 is not set

# CONFIG_NLS_CODEPAGE_852 is not set

# CONFIG_NLS_CODEPAGE_855 is not set

# CONFIG_NLS_CODEPAGE_857 is not set

# CONFIG_NLS_CODEPAGE_860 is not set

# CONFIG_NLS_CODEPAGE_861 is not set

# CONFIG_NLS_CODEPAGE_862 is not set

# CONFIG_NLS_CODEPAGE_863 is not set

# CONFIG_NLS_CODEPAGE_864 is not set

# CONFIG_NLS_CODEPAGE_865 is not set

# CONFIG_NLS_CODEPAGE_866 is not set

# CONFIG_NLS_CODEPAGE_869 is not set

CONFIG_NLS_CODEPAGE_936=m

# CONFIG_NLS_CODEPAGE_950 is not set

# CONFIG_NLS_CODEPAGE_932 is not set

# CONFIG_NLS_CODEPAGE_949 is not set

# CONFIG_NLS_CODEPAGE_874 is not set

# CONFIG_NLS_ISO8859_8 is not set

# CONFIG_NLS_CODEPAGE_1250 is not set

# CONFIG_NLS_CODEPAGE_1251 is not set

CONFIG_NLS_ASCII=m

CONFIG_NLS_ISO8859_1=m

# CONFIG_NLS_ISO8859_2 is not set

# CONFIG_NLS_ISO8859_3 is not set

# CONFIG_NLS_ISO8859_4 is not set

# CONFIG_NLS_ISO8859_5 is not set

# CONFIG_NLS_ISO8859_6 is not set

# CONFIG_NLS_ISO8859_7 is not set

# CONFIG_NLS_ISO8859_9 is not set

# CONFIG_NLS_ISO8859_13 is not set

# CONFIG_NLS_ISO8859_14 is not set

CONFIG_NLS_ISO8859_15=m

# CONFIG_NLS_KOI8_R is not set

# CONFIG_NLS_KOI8_U is not set

CONFIG_NLS_UTF8=m



#

# Distributed Lock Manager

#

# CONFIG_DLM is not set



#

# Instrumentation Support

#

# CONFIG_PROFILING is not set



#

# Kernel hacking

#

CONFIG_TRACE_IRQFLAGS_SUPPORT=y

# CONFIG_PRINTK_TIME is not set

# CONFIG_ENABLE_MUST_CHECK is not set

# CONFIG_MAGIC_SYSRQ is not set

# CONFIG_UNUSED_SYMBOLS is not set

# CONFIG_DEBUG_FS is not set

# CONFIG_HEADERS_CHECK is not set

# CONFIG_DEBUG_KERNEL is not set

CONFIG_LOG_BUF_SHIFT=14

# CONFIG_DEBUG_BUGVERBOSE is not set

CONFIG_EARLY_PRINTK=y

# CONFIG_DOUBLEFAULT is not set



#

# Security options

#

# CONFIG_KEYS is not set

# CONFIG_SECURITY is not set



#

# Cryptographic options

#

CONFIG_CRYPTO=y

CONFIG_CRYPTO_ALGAPI=y

CONFIG_CRYPTO_BLKCIPHER=y

CONFIG_CRYPTO_HASH=y

CONFIG_CRYPTO_MANAGER=y

CONFIG_CRYPTO_HMAC=y

CONFIG_CRYPTO_XCBC=m

CONFIG_CRYPTO_NULL=m

CONFIG_CRYPTO_MD4=m

CONFIG_CRYPTO_MD5=y

CONFIG_CRYPTO_SHA1=y

CONFIG_CRYPTO_SHA256=m

CONFIG_CRYPTO_SHA512=m

CONFIG_CRYPTO_WP512=m

CONFIG_CRYPTO_TGR192=m

CONFIG_CRYPTO_GF128MUL=m

CONFIG_CRYPTO_ECB=m

CONFIG_CRYPTO_CBC=y

CONFIG_CRYPTO_PCBC=m

CONFIG_CRYPTO_LRW=m

CONFIG_CRYPTO_DES=y

# CONFIG_CRYPTO_FCRYPT is not set

CONFIG_CRYPTO_BLOWFISH=m

CONFIG_CRYPTO_TWOFISH=m

CONFIG_CRYPTO_TWOFISH_COMMON=m

CONFIG_CRYPTO_TWOFISH_586=m

CONFIG_CRYPTO_SERPENT=m

CONFIG_CRYPTO_AES=m

CONFIG_CRYPTO_AES_586=m

CONFIG_CRYPTO_CAST5=m

CONFIG_CRYPTO_CAST6=m

CONFIG_CRYPTO_TEA=m

CONFIG_CRYPTO_ARC4=m

CONFIG_CRYPTO_KHAZAD=m

CONFIG_CRYPTO_ANUBIS=m

CONFIG_CRYPTO_DEFLATE=y

CONFIG_CRYPTO_MICHAEL_MIC=m

CONFIG_CRYPTO_CRC32C=m

CONFIG_CRYPTO_CAMELLIA=m

# CONFIG_CRYPTO_TEST is not set



#

# Hardware crypto devices

#

# CONFIG_CRYPTO_DEV_PADLOCK is not set

# CONFIG_CRYPTO_DEV_GEODE is not set



#

# Library routines

#

CONFIG_BITREVERSE=y

# CONFIG_CRC_CCITT is not set

# CONFIG_CRC16 is not set

CONFIG_CRC32=y

CONFIG_LIBCRC32C=m

CONFIG_ZLIB_INFLATE=y

CONFIG_ZLIB_DEFLATE=y

CONFIG_PLIST=y

CONFIG_HAS_IOMEM=y

CONFIG_HAS_IOPORT=y

CONFIG_GENERIC_HARDIRQS=y

CONFIG_GENERIC_IRQ_PROBE=y

CONFIG_X86_BIOS_REBOOT=y

CONFIG_KTIME_SCALAR=y

你可能感兴趣的:(config)

git常用命令笔记咩酱-小羊 git 笔记
###用习惯了idea总是不记得git的一些常见命令，需要用到的时候总是担心旁边站了人~~~记个笔记@_@，告诉自己看笔记不丢人初始化初始化一个新的Git仓库gitinit配置配置用户信息gitconfig--globaluser.name"YourName"gitconfig--globaluser.email"[email protected]"基本操作克隆远程仓库gitclone查看
01-Git初识 Meereen Git git
01-Git初识概念：一个免费开源，分布式的代码版本控制系统，帮助开发团队维护代码作用：记录代码内容。切换代码版本，多人开发时高效合并代码内容如何学：个人本机使用：Git基础命令和概念多人共享使用：团队开发同一个项目的代码版本管理Git配置用户信息配置：用户名和邮箱，应用在每次提交代码版本时表明自己的身份命令：查看git版本号git-v配置用户名gitconfig--globaluser.name
【Git】常见命令(仅笔记) 好想有猫猫 Git Linux学习笔记 git 笔记 elasticsearch linux c++
文章目录创建/初始化本地仓库添加本地仓库配置项提交文件查看仓库状态回退仓库查看日志分支删除文件暂存工作区代码远程仓库使用`.gitigore`文件让git不追踪一些文件标签创建/初始化本地仓库gitinit添加本地仓库配置项gitconfig-l#以列表形式显示配置项gitconfiguser.name"ljh"#配置user.namegitconfiguser.email"[email protected]
Xinference如何注册自定义模型玩人工智能的辣条哥人工智能 AI 大模型 Xinference
环境：Xinference问题描述：Xinference如何注册自定义模型解决方案：1.写个model_config.json，内容如下{"version":1,"context_length":2048,"model_name":"custom-llama-3","model_lang":["en","ch"],"model_ability":["generate","chat"],"model
博客网站制作教程 2401_85194651 java maven
首先就是技术框架：后端：Java+SpringBoot数据库：MySQL前端：Vue.js数据库连接：JPA(JavaPersistenceAPI)1.项目结构blog-app/├──backend/│├──src/main/java/com/example/blogapp/││├──BlogApplication.java││├──config/│││└──DatabaseConfig.java
前端代码上传文件余生逆风飞翔前端 javascript 开发语言
点击上传文件import{ElNotification}from'element-plus'import{API_CONFIG}from'../config/index.js'import{UploadFilled}from'@element-plus/icons-vue'import{reactive}from'vue'import{BASE_URL}from'../config/index'i
metaRTC5.0 API编程指南(一) metaRTC metaRTC c++c语言 webrtc
概述metaRTC5.0版本API进行了重构，本篇文章将介绍webrtc传输调用流程和例子。metaRTC5.0版本提供了C++和纯C两种接口。纯C接口YangPeerConnection头文件:include/yangrtc/YangPeerConnection.htypedefstruct{void*conn;YangAVInfo*avinfo;YangStreamConfigstreamco
Redis 有哪些危险命令？如何防范？花小疯 redis 缓存数据库危险命令大数据
Redis有哪些危险命令？Redis的危险命令主要有以下几个：1.keys客户端可查询出所有存在的键。2.flushdb删除Redis中当前所在数据库中的所有记录，并且此命令从不会执行失败。3.flushall删除Redis中所有数据库中的所有记录，不止是当前所在数据库，并且此命令从不会执行失败。4.config客户端可修改Redis配置。怎么禁用和重命名危险命令？看下redis.conf默认配置
ansible的安装、使用 ytym00
简介高度模块化，调用特定的模块，完成特定的任务，基于Yaml，来完成批量任务的模板化，来支持playbook。基于Python语言实现，主要使用Paramiko、PyYAML和JinJa2三个关键模块，部署简单(agentless)，主从模式，支持自定义模块，支持playbook，幂等性：允许重复执行N次，没有变化时，只会执行第一次。特点：1、Configuration(cfengine,chef
Istio pilot-discovery服务发现源码解析（1.13版本） xidianjiapei001 #Istio istio 云原生服务发现
Istiopilot-discovery服务发现介绍工作机制初始化初始化Config控制器初始化Service控制器controller初始化NamespaceServiceNodePodPilotDiscovery各组件启动流程DiscoveryServer接收Envoy的gRPC连接请求流程Config变化后向Envoy推送更新的流程总结参考介绍IstioPilot的代码分为Pilot-Dis
vue2实现复制,粘贴功能周bro vue.js javascript 前端
一、需求说明在项目中点击按钮复制某行文本是很常见的应用场景，在Vue项目中实现复制功能需要借助vue-clipboard2插件。二、代码实现1、安装vue-clipboard2依赖（出现错误的话，可以试试切换成淘宝镜像源npmconfigsetregistryhttps://registry.npm.taobao.org）npminstall--savevue-clipboard22、在main.
史上最全git命令,git回滚,git命令大全騒周其他 git
git命令大全一、Git整体理解二、由暂存区本地仓库三、由本地仓->远程仓库四、冲突处理五、Git分支操作六、bug的分支七、feature分支八、暂存的使用九、远程仓的操作十、标签的使用十一、Git配置全局信息十二、Linux的一些简单操作和一些符号的解释十三、符号解释十四、显示安装详细信息十五、gitconfig十六、Gitclone十七、Gitinit十八、gitstatus十九、gitre
PCIe进阶之TL：Memory, I/O, and Configuration Request Rules & TPH Rules 芯芯之火，可以燎原 PCIe进阶 PCIe进阶硬件工程信息与通信
1Memory,I/O,andConfigurationRequestRules下述规则适用于Memory请求、IO请求和配置请求。除了公共的header字段外，所有Memory请求、IO请求和配置请求还包括以下字段：（1）RequesterID[15:0]和Tag[9:0]，组成了TransactionID。（2）LastDWBE[3:0]和1stDWBE[3:0]字段。对于TH字段置1的Mem
若依后端正常启动但是uniapp移动端提示后端接口异常大可大可抖 uni-app
pc端能用模拟器也能正常连接接口，手机端真机调试连不上接口解决：1.先看config.js的填自己的ip地址module.exports={//baseUrl:'https://vue.ruoyi.vip/prod-api',baseUrl:"http://192.168.101.5:8080",}2.网络环境问题（防火墙）点击属性然后选择专用
Linux使用mjpg-streamer进行图像传输 —你的鼬先生 Linux驱动 linux 树莓派图像传输
图像传输是一项在Linux操作系统中比较常见的一个操作，在视频图传时，一般是采用MJPG-streamer来进行图像传输，本文就以树莓派为例子，来示范一个图像传输。1.树莓派的摄像头激活首先更新树莓派sudoapt-getupdatesudoapt-getupgrade随后打开树莓派的配置界面，选择InterfaceOptionsudoraspi-config在InterfaceOption选择C
ComfyUI中的sam模型国内下载方法 jayli517 ComfyUI python stable diffusion
was-node-suite-comfyui这个节点安装的时候，有它内部的config配置文件，里面其实给了一些下载地址，配置文件里是这么写的："sam_model_vith_url":"https://dl.fbaipublicfiles.com/segment_anything/sam_vit_h_4b8939.pth","sam_model_vitl_url":"https://dl.fba
相对与绝对路径、命令：cd、mkdir、rmdir、rm 强出头
2.6相对和绝对路径绝对路径：都是从根目录/开始的就是绝对路径，无论在任何目录下都能通过该路径找到该文件相对路径：不是以根目录开头的，相对当前目录的路径[root@mylinuxetc]#cat/etc/sysconfig/network-scripts/ifcfg-ens33（这里我们使用绝对路径查看文件ifcfg-ens33）[root@mylinuxetc]#cd/etc/sysconfig
Spring Security定义多个过滤器链（10）小黑屋说YYDS spring
在SpringSecurity中可以同时存在多个过滤器链，一个WebSecurityConfigurerAdapter的实例就可以配置一条过滤器链。我们来看如下一个案例：@ConfigurationpublicclassSecurityConfig{@BeanUserDetailsServiceus(){InMemoryUserDetailsManagerusers=newInMemoryUser
npm install报错npm ERR! code CERT_HAS_EXPIRED 夏早安 npm 前端 node.js
报错如图解决办法：强制清缓存，取消ssl验证1.npmcacheclean--force2.npmconfigsetstrict-sslfalse3.重新npminstall4.依赖下载成功
PCIe进阶之TL：Common Packet Header Fields & TLPs with Data Payloads Rules 芯芯之火，可以燎原 PCIe进阶 PCIe进阶硬件工程信息与通信
1TransactionLayerProtocol-PacketDefinitionTLP有四种事务类型：Memory、I/O、Configuration和Messages，两种地址格式：32bit和64bit。构成TLP时，所有标记为Reserved的字段（有时缩写为R）都必须全为0。接收者Rx必须忽略此字段中的值，PCIeSwitch必须对其进行原封不动的转发。请注意，对于某些字段，既有指定值
FPGA器件在线配置方法概述 fpga和matlab FPGA 其他 fpga开发 FPGA 在线配置
目录1.配置电路结构和原理2.ICR控制电路软件3.几种常见的FPGA在线配置方法3.1动态部分重配置（PartialReconfiguration,PR）3.2在系统编程（In-SystemProgramming,ISP）3.3多比特流配置（Multi-BitstreamConfiguration）3.4远程更新与配置3.5使用OpenCL或HLS工具FPGA（Field-Programmabl
python+adb 0o一人情 adb命令 Python项目 python 开发语言
#!/usr/bin/pythonenv#-*-coding:utf-8-*-importosimportsysimportsubprocessfromtimeimportsleepimportlogginglogging.basicConfig(level=logging.DEBUG)classScreenCapture():defget_screen_size(self):"""获取手机分辨率
关于项目中使用shiro进行安全管理的总结一颗大青柠 Java Shiro java spring
关于项目中使用shiro进行安全管理的总结关于SpringBoot下使用shiro进行用户认证与权限管理对于安全框架有一定了解的开发者一定对于shiro这款安全框架有一定的了解，这里我们不再对该框架进行其设计与知识的介绍，仅对于我的个人项目中所使用到的进行一个总结，并放上代码。使用该框架的第一步，进行配置：packagecom.libvirtjava.demo.vm.util.config;imp
终于搞懂TS中的泛型啦! | typescript 入门指南 04 程序员王天 TypeScript实践指南前端 javascript typescript
大家好，我是王天~今天分享的是《ts入门指南》系列中第四篇，主要讲解ts中的泛型应用泛型在ts中是比较重要的概念，我花挺长时间才搞明白，整理输出这篇文章，希望能帮助到大家~《ts入门指南》系列，点击下方蓝色字体即可访问TsvsJs谁适合前端开发？|TypeScript入门指南01详解tsconfig.json配置文件|TypeScript入门指南02必学！TypeScript语法类型基础|Type
MyBatis系统学习（一）——项目结构及其含义 OEC小胖胖 MyBatis mybatis 学习 web 后端
1.MyBatis简介MyBatis是一款优秀的持久层框架，它通过SQL映射的方式实现Java对数据库操作的映射，既保留了SQL语句的灵活性，也简化了代码的编写。在一个MyBatis项目中，核心部分主要有：配置文件（mybatis-config.xml）映射文件（Mapper.xml）实体类（Entity/POJO）接口类（Mapper接口）MyBatis会话工厂（SqlSessionFactor
【Python】已解决：WARNING: pip is configured with locations that require TLS/SSL, however the ssl module i 屿小夏 python pip ssl
文章目录一、分析问题背景二、可能出错的原因三、错误代码示例四、正确代码示例五、注意事项已解决：pipSSL模块不可用导致无法连接的错误一、分析问题背景在使用pip安装Python包时，用户可能会遇到如下错误信息：WARNING:pipisconfiguredwithlocationsthatrequireTLS/SSL,howeverthesslmoduleinPythonisnotavailab
pip is configured with locations that require TLS/SSL, however the ssl module in Python is notable _Johnny_ Python pip ssl python
现象执行pipinstall时报错：WARNING:pipisconfiguredwithlocationsthatrequireTLS/SSL,howeverthesslmoduleinPythonisnotavailable.Hint:Itlookslikeapath.Thepathdoesexist.WARNING:pipisconfiguredwithlocationsthatrequir
区块链私有链new qis_qis 区块链区块链以太坊数字货币
{“config”:{“chainld”:666,“homesteadBlock”:0,“eip150Block”:0,“eip150Hash”:“0x0000000000000000000000000000000000000000000000000000000000000000”,“eip155Block”:0,“eip158Block”:0,“byzantiumBlock”:0,“consta
区块链私有链 qis_qis 区块链区块链以太坊数字货币
{"config":{"chainld":666,"homesteadBlock":0,"eip150Block":0,"eip150Hash":"0x0000000000000000000000000000000000000000000000000000000000000000","eip155Block":0,"eip158Block":0,"byzantiumBlock":0,"consta
Superset二次开发之源码DependencyList.tsx 分析 aimmon Superset二次开发 Superset BI 二次开发 typescript 前端
功能点路径superset-frontend\src\dashboard\components\nativeFilters\FiltersConfigModal\FiltersConfigForm\DependencyList.tsx/***LicensedtotheApacheSoftwareFoundation(ASF)underone*ormorecontributorlicenseagre
mondb入手木zi_鸣 mongodb
windows 启动mongodb 编写bat文件， mongod --dbpath D:\software\MongoDBDATA mongod --help 查询各种配置配置在mongob 打开批处理，即可启动，27017原生端口，shell操作监控端口扩展28017，web端操作端口启动配置文件配置，数据更灵活
大型高并发高负载网站的系统架构 bijian1013 高并发负载均衡
扩展Web应用程序一.概念简单的来说，如果一个系统可扩展，那么你可以通过扩展来提供系统的性能。这代表着系统能够容纳更高的负载、更大的数据集，并且系统是可维护的。扩展和语言、某项具体的技术都是无关的。扩展可以分为两种： 1.
DISPLAY变量和xhost(原创) czmmiao display
DISPLAY 在Linux/Unix类操作系统上, DISPLAY用来设置将图形显示到何处. 直接登陆图形界面或者登陆命令行界面后使用startx启动图形, DISPLAY环境变量将自动设置为:0:0, 此时可以打开终端, 输出图形程序的名称(比如xclock)来启动程序, 图形将显示在本地窗口上, 在终端上输入printenv查看当前环境变量, 输出结果中有如下内容:DISPLAY=:0.0
获取B/S客户端IP 周凡杨 java 编程 jsp Web 浏览器
最近想写个B/S架构的聊天系统，因为以前做过C/S架构的QQ聊天系统，所以对于Socket通信编程只是一个巩固。对于C/S架构的聊天系统，由于存在客户端Java应用，所以直接在代码中获取客户端的IP，应用的方法为： String ip = InetAddress.getLocalHost().getHostAddress(); 然而对于WEB
浅谈类和对象朱辉辉33 编程
类是对一类事物的总称，对象是描述一个物体的特征，类是对象的抽象。简单来说，类是抽象的，不占用内存，对象是具体的，占用存储空间。类是由属性和方法构成的，基本格式是public class 类名{ //定义属性 private/public 数据类型属性名； //定义方法 publ
android activity与viewpager+fragment的生命周期问题肆无忌惮_ viewpager
有一个Activity里面是ViewPager，ViewPager里面放了两个Fragment。第一次进入这个Activity。开启了服务，并在onResume方法中绑定服务后，对Service进行了一定的初始化，其中调用了Fragment中的一个属性。 super.onResume(); bindService(intent, conn, BIND_AUTO_CREATE);
base64Encode对图片进行编码 843977358 base64 图片 encoder
/** * 对图片进行base64encoder编码 * * @author mrZhang * @param path * @return */ public static String encodeImage(String path) { BASE64Encoder encoder = null; byte[] b = null; I
Request Header简介 aigo servlet
当一个客户端(通常是浏览器)向Web服务器发送一个请求是，它要发送一个请求的命令行，一般是GET或POST命令，当发送POST命令时，它还必须向服务器发送一个叫“Content-Length”的请求头(Request Header) 用以指明请求数据的长度，除了Content-Length之外，它还可以向服务器发送其它一些Headers，如：
HttpClient4.3 创建SSL协议的HttpClient对象 alleni123 httpclient 爬虫 ssl
public class HttpClientUtils { public static CloseableHttpClient createSSLClientDefault(CookieStore cookies){ SSLContext sslContext=null; try { sslContext=new SSLContextBuilder().l
java取反 -右移-左移-无符号右移的探讨百合不是茶位运算符位移
取反：在二进制中第一位，1表示符数，0表示正数 byte a = -1; 原码：10000001 反码：11111110 补码：11111111 //异或: 00000000 byte b = -2; 原码：10000010 反码：11111101 补码：11111110 //异或: 00000001
java多线程join的作用与用法 bijian1013 java 多线程
对于JAVA的join，JDK 是这样说的：join public final void join （long millis ）throws InterruptedException Waits at most millis milliseconds for this thread to die. A timeout of 0 means t
Java发送http请求(get 与post方法请求) bijian1013 java spring
PostRequest.java package com.bijian.study; import java.io.BufferedReader; import java.io.DataOutputStream; import java.io.IOException; import java.io.InputStreamReader; import java.net.HttpURL
【Struts2二】struts.xml中package下的action配置项默认值 bit1129 struts.xml
在第一部份，定义了struts.xml文件，如下所示： <!DOCTYPE struts PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 2.3//EN" "http://struts.apache.org/dtds/struts
【Kafka十三】Kafka Simple Consumer bit1129 simple
代码中关于Host和Port是割裂开的，这会导致单机环境下的伪分布式Kafka集群环境下，这个例子没法运行。实际情况是需要将host和port绑定到一起， package kafka.examples.lowlevel; import kafka.api.FetchRequest; import kafka.api.FetchRequestBuilder; impo
nodejs学习api ronin47 nodejs api
NodeJS基础什么是NodeJS JS是脚本语言，脚本语言都需要一个解析器才能运行。对于写在HTML页面里的JS，浏览器充当了解析器的角色。而对于需要独立运行的JS，NodeJS就是一个解析器。每一种解析器都是一个运行环境，不但允许JS定义各种数据结构，进行各种计算，还允许JS使用运行环境提供的内置对象和方法做一些事情。例如运行在浏览器中的JS的用途是操作DOM，浏览器就提供了docum
java-64.寻找第N个丑数 bylijinnan java
public class UglyNumber { /** * 64.查找第N个丑数具体思路可参考 [url] http://zhedahht.blog.163.com/blog/static/2541117420094245366965/[/url] * 题目：我们把只包含因子 2、3和5的数称作丑数（Ugly Number）。例如6、8都是丑数，但14
二维数组（矩阵）对角线输出 bylijinnan 二维数组
/** 二维数组对角线输出两个方向例如对于数组： { 1, 2, 3, 4 }, { 5, 6, 7, 8 }, { 9, 10, 11, 12 }, { 13, 14, 15, 16 }, slash方向输出： 1 5 2 9 6 3 13 10 7 4 14 11 8 15 12 16 backslash输出： 4 3
[JWFD开源工作流设计]工作流跳跃模式开发关键点(今日更新) comsci 工作流
既然是做开源软件的,我们的宗旨就是给大家分享设计和代码,那么现在我就用很简单扼要的语言来透露这个跳跃模式的设计原理大家如果用过JWFD的ARC-自动运行控制器,或者看过代码,应该知道在ARC算法模块中有一个函数叫做SAN(),这个函数就是ARC的核心控制器,要实现跳跃模式,在SAN函数中一定要对LN链表数据结构进行操作,首先写一段代码,把
redis常见使用 cuityang redis 常见使用
redis 通常被认为是一个数据结构服务器，主要是因为其有着丰富的数据结构 strings、map、 list、sets、 sorted sets 引入jar包 jedis-2.1.0.jar (本文下方提供下载) package redistest; import redis.clients.jedis.Jedis; public class Listtest
配置多个redis dalan_123 redis
配置多个redis客户端 <?xml version="1.0" encoding="UTF-8"?><beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi=&quo
attrib命令 dcj3sjt126com attr
attrib指令用于修改文件的属性.文件的常见属性有:只读.存档.隐藏和系统. 只读属性是指文件只可以做读的操作.不能对文件进行写的操作.就是文件的写保护. 存档属性是用来标记文件改动的.即在上一次备份后文件有所改动.一些备份软件在备份的时候会只去备份带有存档属性的文件.
Yii使用公共函数 dcj3sjt126com yii
在网站项目中，没必要把公用的函数写成一个工具类，有时候面向过程其实更方便。在入口文件index.php里添加 require_once('protected/function.php'); 即可对其引用，成为公用的函数集合。 function.php如下： <?php /** * This is the shortcut to D
linux 系统资源的查看（free、uname、uptime、netstat） eksliang netstat linux uname linux uptime linux free
linux 系统资源的查看转载请出自出处：http://eksliang.iteye.com/blog/2167081 http://eksliang.iteye.com 一、free查看内存的使用情况语法如下： free [-b][-k][-m][-g] [-t] 参数含义 -b:直接输入free时，显示的单位是kb我们可以使用b(bytes),m
JAVA的位操作符 greemranqq 位运算 JAVA位移 <<>>>
最近几种进制，加上各种位操作符，发现都比较模糊，不能完全掌握，这里就再熟悉熟悉。 1.按位操作符：按位操作符是用来操作基本数据类型中的单个bit,即二进制位，会对两个参数执行布尔代数运算，获得结果。与（&）运算： 1&1 = 1, 1&0 = 0, 0&0 &
Web前段学习网站 ihuning Web
Web前段学习网站菜鸟学习：http://www.w3cschool.cc/ JQuery中文网：http://www.jquerycn.cn/ 内存溢出：http://outofmemory.cn/#csdn.blog http://www.icoolxue.com/ http://www.jikexue
强强联合：FluxBB 作者加盟 Flarum justjavac r
原文：FluxBB Joins Forces With Flarum作者：Toby Zerner译文：强强联合：FluxBB 作者加盟 Flarum译者：justjavac FluxBB 是一个快速、轻量级论坛软件，它的开发者是一名德国的 PHP 天才 Franz Liedke。FluxBB 的下一个版本(2.0)将被完全重写，并已经开发了一段时间。FluxBB 看起来非常有前途的，
java统计在线人数（session存储信息的） macroli java Web
这篇日志是我写的第三次了前两次都发布失败！郁闷极了！由于在web开发中常常用到这一部分所以在此记录一下，呵呵，就到备忘录了！我对于登录信息时使用session存储的，所以我这里是通过实现HttpSessionAttributeListener这个接口完成的。 1、实现接口类，在web.xml文件中配置监听类，从而可以使该类完成其工作。 public class Ses
bootstrp carousel初体验快速构建图片播放 qiaolevip 每天进步一点点学习永无止境 bootstrap 纵观千象
img{ border: 1px solid white; box-shadow: 2px 2px 12px #333; _width: expression(this.width > 600 ? "600px" : this.width + "px"); _height: expression(this.width &
SparkSQL读取HBase数据，通过自定义外部数据源 superlxw1234 spark sparksql sparksql读取hbase sparksql外部数据源
关键字：SparkSQL读取HBase、SparkSQL自定义外部数据源前面文章介绍了SparSQL通过Hive操作HBase表。 SparkSQL从1.2开始支持自定义外部数据源(External DataSource)，这样就可以通过API接口来实现自己的外部数据源。这里基于Spark1.4.0，简单介绍SparkSQL自定义外部数据源，访
Spring Boot 1.3.0.M1发布 wiselyman spring boot
Spring Boot 1.3.0.M1于6.12日发布，现在可以从Spring milestone repository下载。这个版本是基于Spring Framework 4.2.0.RC1,并在Spring Boot 1.2之上提供了大量的新特性improvements and new features。主要包含以下： 1.提供一个新的sprin