C#调用斑马打印机打印条码标签(支持COM、LPT、USB、TCP连接方式和ZPL、EPL、CPCL指令)

原文地址：http://blog.csdn.net/ldljlq/article/details/7338772

 在批量打印商品标签时一般都要加上条码或图片，而这类应用大多是使用斑马打印机，所以我也遇到了怎么打印的问题。

一种办法是用标签设计软件做好模板，在标签设计软件中打印，这种办法不用写代码，但对我来说觉得不能接受，所以尝试代码解决问题。

网上搜索一番，找不到什么资料，基本都是说发送ZPL、EPL指令到打印机，而且还是COM/LPT口连接打印机。后来研究.net的打印类库，发现是用绘图方式打印至打印机的，也叫GDI打印，于是思路有了点突破，那我可以用报表工具画好标签，运行报表时，把结果输出位图，再发送至打印机。

后来又找到一种更好的办法，利用标签设计软件做好模板，打印至本地文件，把其中的ZPL、EPL指令拷贝出来，替换其中动态变化的内容为变量名，做成一个模板文本，在代码中动态替换变量，再把指令输出至打印机。

折腾了几天，终于把这两种思路都实现了，顺便解决了USB接口打印机的ZPL、EPL指令发送问题。

今天有点困，改天再详细讲解一下这两种思路的具体实现。

==============================================================================================================
如何获取标签设计软件输出至打印的ZPL指令？安装好打印机驱动，修改打印机端口，新建一个打印机端口，类型为本地端口，端口名称设置为C:\printer.log，再用标签设计软件打印一次，此文件中就有ZPL指令了。

 ==============================================================================================================

2012-06-02：发布代码ZebraPrintHelper.cs。

==============================================================================================================

2013-01-17：发布代码ZebraPrintHelper.cs，修正BUG，新增TCP打印支持Zebra无线打印QL320+系列打印机。已经生产环境实际应用，支持POS小票、吊牌、洗水唛、条码、文本混合标签打印。因涉及公司源码，只能截图VS解决方案给大家看。

==============================================================================================================

 

 ZebraPrintHelper类代码：

using System;
using System.Collections.Generic;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.IO.Ports;
using System.Net.Sockets;
using System.Runtime.InteropServices;
using System.Text;

namespace Umisky.BarcodePrint.Core {
    /// <summary>
    /// 斑马打印助手，支持LPT/COM/USB/TCP四种模式，适用于标签、票据、条码打印。
    /// </summary>
    public static class ZebraPrintHelper {

        #region 定义私有字段
        /// <summary>
        /// 线程锁，防止多线程调用。
        /// </summary>
        private static object SyncRoot = new object();
        /// <summary>
        /// ZPL压缩字典
        /// </summary>
        private static List<KeyValue> compressDictionary = new List<KeyValue>();
        #endregion

        #region 定义属性
        public static float TcpLabelMaxHeightCM { get; set; }
        public static int TcpPrinterDPI { get; set; }
        public static string TcpIpAddress { get; set; }
        public static int TcpPort { get; set; }
        public static int Copies { get; set; }
        public static int Port { get; set; }
        public static string PrinterName { get; set; }
        public static bool IsWriteLog { get; set; }
        public static DeviceType PrinterType { get; set; }
        public static ProgrammingLanguage PrinterProgrammingLanguage { get; set; }
        /// <summary>
        /// 日志保存目录，WEB应用注意不能放在BIN目录下。
        /// </summary>
        public static string LogsDirectory { get; set; }
        public static byte[] GraphBuffer { get; set; }
        private static int GraphWidth { get; set; }
        private static int GraphHeight { get; set; }
        private static int RowSize {
            get {
                return (((GraphWidth) + 31) >> 5) << 2;
            }
        }
        private static int RowRealBytesCount {
            get {
                if ((GraphWidth % 8) > 0) {
                    return GraphWidth / 8 + 1;
                }
                else {
                    return GraphWidth / 8;
                }
            }
        }
        #endregion

        #region 静态构造方法
        static ZebraPrintHelper() {
            initCompressCode();
            Port = 1;
            GraphBuffer = new byte[0];
            IsWriteLog = false;
            LogsDirectory = "logs";
            PrinterProgrammingLanguage = ProgrammingLanguage.ZPL;
        }

        private static void initCompressCode() {
            //G H I J K L M N O P Q R S T U V W X Y        对应1,2,3,4……18,19。
            //g h i j k l m n o p q r s t u v w x y z      对应20,40,60,80……340,360,380,400。
            for (int i = 0; i < 19; i++) {
                compressDictionary.Add(new KeyValue() { Key = Convert.ToChar(71 + i), Value = i + 1 });
            }
            for (int i = 0; i < 20; i++) {
                compressDictionary.Add(new KeyValue() { Key = Convert.ToChar(103 + i), Value = (i + 1) * 20 });
            }
        }
        #endregion

        #region 日志记录方法
        private static void WriteLog(string text, LogType logType) {
            string endTag = string.Format("\r\n{0}\r\n", new string('=', 80));
            string path = string.Format("{0}\\{1}-{2}.log", LogsDirectory, DateTime.Now.ToString("yyyy-MM-dd"), logType);
            if (!Directory.Exists(LogsDirectory)) {
                Directory.CreateDirectory(LogsDirectory);
            }
            if (logType == LogType.Error) {
                File.AppendAllText(path, string.Format("{0}{1}", text, endTag), Encoding.UTF8);
            }
            if (logType == LogType.Print) {
                File.AppendAllText(path, string.Format("{0}{1}", text, endTag), Encoding.UTF8);
            }
        }

        private static void WriteLog(byte[] bytes, LogType logType) {
            string endTag = string.Format("\r\n{0}\r\n", new string('=', 80));
            string path = string.Format("{0}\\{1}-{2}.log", LogsDirectory, DateTime.Now.ToString("yyyy-MM-dd"), logType);
            if (!Directory.Exists(LogsDirectory)) {
                Directory.CreateDirectory(LogsDirectory);
            }
            if (logType == LogType.Error) {
                File.AppendAllText(path, string.Format("{0}{1}", Encoding.UTF8.GetString(bytes), endTag), Encoding.UTF8);
            }
            if (logType == LogType.Print) {
                File.AppendAllText(path, string.Format("{0}{1}", Encoding.UTF8.GetString(bytes), endTag), Encoding.UTF8);
            }
        }
        #endregion

        #region 封装方法，方便调用。
        public static bool PrintWithCOM(string cmd, int port, bool isWriteLog) {
            PrinterType = DeviceType.COM;
            Port = port;
            IsWriteLog = isWriteLog;
            return PrintCommand(cmd);
        }

        public static bool PrintWithCOM(byte[] bytes, int port, bool isWriteLog) {
            PrinterType = DeviceType.COM;
            Port = port;
            IsWriteLog = isWriteLog;
            return PrintGraphics(bytes);
        }

        public static bool PrintWithLPT(string cmd, int port, bool isWriteLog) {
            PrinterType = DeviceType.LPT;
            Port = port;
            IsWriteLog = isWriteLog;
            return PrintCommand(cmd);
        }

        public static bool PrintWithLPT(byte[] bytes, int port, bool isWriteLog) {
            PrinterType = DeviceType.LPT;
            Port = port;
            IsWriteLog = isWriteLog;
            return PrintGraphics(bytes);
        }

        public static bool PrintWithTCP(string cmd, bool isWriteLog) {
            PrinterType = DeviceType.TCP;
            IsWriteLog = isWriteLog;
            return PrintCommand(cmd);
        }

        public static bool PrintWithTCP(byte[] bytes, bool isWriteLog) {
            PrinterType = DeviceType.TCP;
            IsWriteLog = isWriteLog;
            return PrintGraphics(bytes);
        }

        public static bool PrintWithDRV(string cmd, string printerName, bool isWriteLog) {
            PrinterType = DeviceType.DRV;
            PrinterName = printerName;
            IsWriteLog = isWriteLog;
            return PrintCommand(cmd);
        }

        public static bool PrintWithDRV(byte[] bytes, string printerName, bool isWriteLog) {
            PrinterType = DeviceType.DRV;
            PrinterName = printerName;
            IsWriteLog = isWriteLog;
            return PrintGraphics(bytes);
        }
        #endregion

        #region 打印ZPL、EPL、CPCL、TCP指令
        public static bool PrintCommand(string cmd) {
            lock (SyncRoot) {
                bool result = false;
                try {
                    switch (PrinterType) {
                        case DeviceType.COM:
                            result = comPrint(Encoding.Default.GetBytes(cmd));
                            break;
                        case DeviceType.LPT:
                            result = lptPrint(Encoding.Default.GetBytes(cmd));
                            break;
                        case DeviceType.DRV:
                            result = drvPrint(Encoding.Default.GetBytes(cmd));
                            break;
                        case DeviceType.TCP:
                            result = tcpPrint(Encoding.Default.GetBytes(cmd));
                            break;
                    }
                    if (!string.IsNullOrEmpty(cmd) && IsWriteLog) {
                        WriteLog(cmd, LogType.Print);
                    }
                }
                catch (Exception ex) {
                    //记录日志
                    if (IsWriteLog) {
                        WriteLog(string.Format("{0} => {1}\r\n{2}", DateTime.Now, ex.Message, ex), LogType.Error);
                    }
                    throw new Exception(ex.Message, ex);
                }
                finally {
                    GraphBuffer = new byte[0];
                }
                return result;
            }
        }
        #endregion

        #region 打印图像
        public static bool PrintGraphics(byte[] graph) {
            lock (SyncRoot) {
                bool result = false;
                try {
                    GraphBuffer = graph;
                    byte[] cmdBytes = new byte[0];
                    switch (PrinterProgrammingLanguage) {
                        case ProgrammingLanguage.ZPL:
                            cmdBytes = getZPLBytes();
                            break;
                        case ProgrammingLanguage.EPL:
                            cmdBytes = getEPLBytes();
                            break;
                        case ProgrammingLanguage.CPCL:
                            cmdBytes = getCPCLBytes();
                            break;
                    }
                    switch (PrinterType) {
                        case DeviceType.COM:
                            result = comPrint(cmdBytes);
                            break;
                        case DeviceType.LPT:
                            result = lptPrint(cmdBytes);
                            break;
                        case DeviceType.DRV:
                            result = drvPrint(cmdBytes);
                            break;
                        case DeviceType.TCP:
                            result = tcpPrint(cmdBytes);
                            break;
                    }
                    if (cmdBytes.Length > 0 && IsWriteLog) {
                        WriteLog(cmdBytes, LogType.Print);
                    }
                }
                catch (Exception ex) {
                    //记录日志
                    if (IsWriteLog) {
                        WriteLog(string.Format("{0} => {1}\r\n{2}", DateTime.Now, ex.Message, ex), LogType.Error);
                    }
                    throw new Exception(ex.Message, ex);
                }
                finally {
                    GraphBuffer = new byte[0];
                }
                return result;
            }
        }
        #endregion

        #region 打印指令
        private static bool drvPrint(byte[] cmdBytes) {
            bool result = false;
            try {
                if (!string.IsNullOrEmpty(PrinterName)) {
                    result = WinDrvPort.SendBytesToPrinter(PrinterName, cmdBytes);
                }
            }
            catch (Exception ex) {
                throw new Exception(ex.Message, ex);
            }
            return result;
        }

        private static bool comPrint(byte[] cmdBytes) {
            bool result = false;
            SerialPort com = new SerialPort(string.Format("{0}{1}", PrinterType, Port), 9600, Parity.None, 8, StopBits.One);
            try {
                com.Open();
                com.Write(cmdBytes, 0, cmdBytes.Length);
                result = true;
            }
            catch (Exception ex) {
                throw new Exception(ex.Message, ex);
            }
            finally {
                if (com.IsOpen) {
                    com.Close();
                }
            }
            return result;
        }

        private static bool lptPrint(byte[] cmdBytes) {
            return LptPort.Write(string.Format("{0}{1}", PrinterType, Port), cmdBytes);
        }

        private static bool tcpPrint(byte[] cmdBytes) {
            bool result = false;
            TcpClient tcp = null;
            try {
                tcp = TimeoutSocket.Connect(string.Empty, TcpIpAddress, TcpPort, 1000);
                tcp.SendTimeout = 1000;
                tcp.ReceiveTimeout = 1000;
                if (tcp.Connected) {
                    tcp.Client.Send(cmdBytes);
                    result = true;
                }
            }
            catch (Exception ex) {
                throw new Exception("打印失败，请检查打印机或网络设置。", ex);
            }
            finally {
                if (tcp != null) {
                    if (tcp.Client != null) {
                        tcp.Client.Close();
                        tcp.Client = null;
                    }
                    tcp.Close();
                    tcp = null;
                }
            }
            return result;
        }
        #endregion

        #region 生成ZPL图像打印指令
        private static byte[] getZPLBytes() {
            byte[] bmpData = getBitmapData();
            int bmpDataLength = bmpData.Length;
            for (int i = 0; i < bmpDataLength; i++) {
                bmpData[i] ^= 0xFF;
            }
            string textBitmap = string.Empty, copiesString = string.Empty;
            string textHex = BitConverter.ToString(bmpData).Replace("-", string.Empty);
            textBitmap = CompressLZ77(textHex);
            for (int i = 0; i < Copies; i++) {
                copiesString += "^XA^FO0,0^XGR:IMAGE.GRF,1,1^FS^XZ";
            }
            string text = string.Format("~DGR:IMAGE.GRF,{0},{1},{2}{3}^IDR:IMAGE.GRF",
                GraphHeight * RowRealBytesCount,
                RowRealBytesCount,
                textBitmap,
                copiesString);
            return Encoding.UTF8.GetBytes(text);
        }
        #endregion

        #region 生成EPL图像打印指令
        private static byte[] getEPLBytes() {
            byte[] buffer = getBitmapData();
            string text = string.Format("N\r\nGW{0},{1},{2},{3},{4}\r\nP{5},1\r\n",
                0,
                0,
                RowRealBytesCount,
                GraphHeight,
                Encoding.GetEncoding("iso-8859-1").GetString(buffer),
                Copies);
            return Encoding.GetEncoding("iso-8859-1").GetBytes(text);
        }
        #endregion

        #region 生成CPCL图像打印指令
        public static byte[] getCPCLBytes() {
            //GRAPHICS Commands
            //Bit-mapped graphics can be printed by using graphics commands. ASCII hex (hexadecimal) is
            //used for expanded graphics data (see example). Data size can be reduced to one-half by utilizing the
            //COMPRESSED-GRAPHICS commands with the equivalent binary character(s) of the hex data. When
            //using CG, a single 8 bit character is sent for every 8 bits of graphics data. When using EG two characters
            //(16 bits) are used to transmit 8 bits of graphics data, making EG only half as efficient. Since this data is
            //character data, however, it can be easier to handle and transmit than binary data.
            //Format:
            //{command} {width} {height} {x} {y} {data}
            //where:
            //{command}: Choose from the following:
            //EXPANDED-GRAPHICS (or EG): Prints expanded graphics horizontally.
            //VEXPANDED-GRAPHICS (or VEG): Prints expanded graphics vertically.
            //COMPRESSED-GRAPHICS (or CG): Prints compressed graphics horizontally.
            //VCOMPRESSED-GRAPHICS (or VCG): Prints compressed graphics vertically.
            //{width}: Byte-width of image.
            //{height} Dot-height of image.
            //{x}: Horizontal starting position.
            //{y}: Vertical starting position.
            //{data}: Graphics data.
            //Graphics command example
            //Input:
            //! 0 200 200 210 1
            //EG 2 16 90 45 F0F0F0F0F0F0F0F00F0F0F0F0F0F0F0F
            //F0F0F0F0F0F0F0F00F0F0F0F0F0F0F0F
            //FORM
            //PRINT

            byte[] bmpData = getBitmapData();
            int bmpDataLength = bmpData.Length;
            for (int i = 0; i < bmpDataLength; i++) {
                bmpData[i] ^= 0xFF;
            }
            string textHex = BitConverter.ToString(bmpData).Replace("-", string.Empty);
            string text = string.Format("! {0} {1} {2} {3} {4}\r\nEG {5} {6} {7} {8} {9}\r\nFORM\r\nPRINT\r\n",
                0, //水平偏移量
                TcpPrinterDPI, //横向DPI
                TcpPrinterDPI, //纵向DPI
                (int)(TcpLabelMaxHeightCM / 2.54f * TcpPrinterDPI), //标签最大像素高度=DPI*标签纸高度(英寸)
                Copies, //份数
                RowRealBytesCount, //图像的字节宽度
                GraphHeight, //图像的像素高度
                0, //横向的开始位置
                0, //纵向的开始位置
                textHex
                );
            return Encoding.UTF8.GetBytes(text);
        }
        #endregion

        #region 获取单色位图数据
        /// <summary>
        ///
        /// </summary>
        /// <param name="pimage"></param>
        /// <returns></returns>
        public static Bitmap ConvertToGrayscale(Bitmap pimage) {
            Bitmap source = null;

            // If original bitmap is not already in 32 BPP, ARGB format, then convert
            if (pimage.PixelFormat != PixelFormat.Format32bppArgb) {
                source = new Bitmap(pimage.Width, pimage.Height, PixelFormat.Format32bppArgb);
                source.SetResolution(pimage.HorizontalResolution, pimage.VerticalResolution);
                using (Graphics g = Graphics.FromImage(source)) {
                    g.DrawImageUnscaled(pimage, 0, 0);
                }
            }
            else {
                source = pimage;
            }

            // Lock source bitmap in memory
            BitmapData sourceData = source.LockBits(new Rectangle(0, 0, source.Width, source.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);

            // Copy image data to binary array
            int imageSize = sourceData.Stride * sourceData.Height;
            byte[] sourceBuffer = new byte[imageSize];
            Marshal.Copy(sourceData.Scan0, sourceBuffer, 0, imageSize);

            // Unlock source bitmap
            source.UnlockBits(sourceData);

            // Create destination bitmap
            Bitmap destination = new Bitmap(source.Width, source.Height, PixelFormat.Format1bppIndexed);

            // Lock destination bitmap in memory
            BitmapData destinationData = destination.LockBits(new Rectangle(0, 0, destination.Width, destination.Height), ImageLockMode.WriteOnly, PixelFormat.Format1bppIndexed);

            // Create destination buffer
            imageSize = destinationData.Stride * destinationData.Height;
            byte[] destinationBuffer = new byte[imageSize];

            int sourceIndex = 0;
            int destinationIndex = 0;
            int pixelTotal = 0;
            byte destinationValue = 0;
            int pixelValue = 128;
            int height = source.Height;
            int width = source.Width;
            int threshold = 500;

            // Iterate lines
            for (int y = 0; y < height; y++) {
                sourceIndex = y * sourceData.Stride;
                destinationIndex = y * destinationData.Stride;
                destinationValue = 0;
                pixelValue = 128;

                // Iterate pixels
                for (int x = 0; x < width; x++) {
                    // Compute pixel brightness (i.e. total of Red, Green, and Blue values)
                    pixelTotal = sourceBuffer[sourceIndex + 1] + sourceBuffer[sourceIndex + 2] + sourceBuffer[sourceIndex + 3];
                    if (pixelTotal > threshold) {
                        destinationValue += (byte)pixelValue;
                    }
                    if (pixelValue == 1) {
                        destinationBuffer[destinationIndex] = destinationValue;
                        destinationIndex++;
                        destinationValue = 0;
                        pixelValue = 128;
                    }
                    else {
                        pixelValue >>= 1;
                    }
                    sourceIndex += 4;
                }
                if (pixelValue != 128) {
                    destinationBuffer[destinationIndex] = destinationValue;
                }
            }

            // Copy binary image data to destination bitmap
            Marshal.Copy(destinationBuffer, 0, destinationData.Scan0, imageSize);

            // Unlock destination bitmap
            destination.UnlockBits(destinationData);

            // Dispose of source if not originally supplied bitmap
            if (source != pimage) {
                source.Dispose();
            }

            // Return
            return destination;
        }
        /// <summary>
        /// 获取单色位图数据(1bpp)，不含文件头、信息头、调色板三类数据。
        /// </summary>
        /// <returns></returns>
        private static byte[] getBitmapData() {
            MemoryStream srcStream = new MemoryStream();
            MemoryStream dstStream = new MemoryStream();
            Bitmap srcBmp = null;
            Bitmap dstBmp = null;
            byte[] srcBuffer = null;
            byte[] dstBuffer = null;
            byte[] result = null;
            try {
                srcStream = new MemoryStream(GraphBuffer);
                srcBmp = Bitmap.FromStream(srcStream) as Bitmap;
                srcBuffer = srcStream.ToArray();
                GraphWidth = srcBmp.Width;
                GraphHeight = srcBmp.Height;
                //dstBmp = srcBmp.Clone(new Rectangle(0, 0, srcBmp.Width, srcBmp.Height), PixelFormat.Format1bppIndexed);
                dstBmp = ConvertToGrayscale(srcBmp);
                dstBmp.Save(dstStream, ImageFormat.Bmp);
                dstBuffer = dstStream.ToArray();

                int bfOffBits = BitConverter.ToInt32(dstBuffer, 10);
                result = new byte[GraphHeight * RowRealBytesCount];

                //读取时需要反向读取每行字节实现上下翻转的效果，打印机打印顺序需要这样读取。
                for (int i = 0; i < GraphHeight; i++) {
                    Array.Copy(dstBuffer, bfOffBits + (GraphHeight - 1 - i) * RowSize, result, i * RowRealBytesCount, RowRealBytesCount);
                }
            }
            catch (Exception ex) {
                throw new Exception(ex.Message, ex);
            }
            finally {
                if (srcStream != null) {
                    srcStream.Dispose();
                    srcStream = null;
                }
                if (dstStream != null) {
                    dstStream.Dispose();
                    dstStream = null;
                }
                if (srcBmp != null) {
                    srcBmp.Dispose();
                    srcBmp = null;
                }
                if (dstBmp != null) {
                    dstBmp.Dispose();
                    dstBmp = null;
                }
            }
            return result;
        }
        #endregion

        #region LZ77图像字节流压缩方法
        public static string CompressLZ77(string text) {
            //将转成16进制的文本进行压缩
            string result = string.Empty;
            char[] arrChar = text.ToCharArray();
            int count = 1;
            for (int i = 1; i < text.Length; i++) {
                if (arrChar[i - 1] == arrChar[i]) {
                    count++;
                }
                else {
                    result += convertNumber(count) + arrChar[i - 1];
                    count = 1;
                }
                if (i == text.Length - 1) {
                    result += convertNumber(count) + arrChar[i];
                }
            }
            return result;
        }

        public static string DecompressLZ77(string text) {
            string result = string.Empty;
            char[] arrChar = text.ToCharArray();
            int count = 0;
            for (int i = 0; i < arrChar.Length; i++) {
                if (isHexChar(arrChar[i])) {
                    //十六进制值
                    result += new string(arrChar[i], count == 0 ? 1 : count);
                    count = 0;
                }
                else {
                    //压缩码
                    int value = GetCompressValue(arrChar[i]);
                    count += value;
                }
            }
            return result;
        }

        private static int GetCompressValue(char c) {
            int result = 0;
            for (int i = 0; i < compressDictionary.Count; i++) {
                if (c == compressDictionary[i].Key) {
                    result = compressDictionary[i].Value;
                }
            }
            return result;
        }

        private static bool isHexChar(char c) {
            return c > 47 && c < 58 || c > 64 && c < 71 || c > 96 && c < 103;
        }

        private static string convertNumber(int count) {
            //将连续的数字转换成LZ77压缩代码，如000可用I0表示。
            string result = string.Empty;
            if (count > 1) {
                while (count > 0) {
                    for (int i = compressDictionary.Count - 1; i >= 0; i--) {
                        if (count >= compressDictionary[i].Value) {
                            result += compressDictionary[i].Key;
                            count -= compressDictionary[i].Value;
                            break;
                        }
                    }
                }
            }
            return result;
        }
        #endregion
    }
}

 

 

调用例子代码：

private void BackgroundWorkerPrint_DoWork(object sender, DoWorkEventArgs e) {
    BackgroundWorker worker = sender as BackgroundWorker;

    int i = 0, nextRemainder = 0, count = this._listBarcodeData.Count;
    bool flag = true;
    float pageWidth, pageHeight;
    int dpiX, dpiY, perPaperFactor;
    string reportPath = string.Format(@"{0}/Reports/{1}", Application.StartupPath, this._modelType);
    PrintLog printLog = new PrintLog() { Operater = LoginName };
    PrinterSettings printerSettings = new PrinterSettings() { PrinterName = PrintParam, Copies = 1 };

    using (StreamReader tr = new StreamReader(this.ModelFilePath)) {
        XElement xe = XDocument.Load(tr).Root.Elements()
            .Elements(XName.Get("ModelType")).First(x => x.Value == this._modelType).Parent;
        pageWidth = float.Parse(xe.Elements(XName.Get("PageWidth")).First().Value);
        pageHeight = float.Parse(xe.Elements(XName.Get("PageHeight")).First().Value);
        dpiX = int.Parse(xe.Elements(XName.Get("DotPerInchX")).First().Value);
        dpiY = int.Parse(xe.Elements(XName.Get("DotPerInchY")).First().Value);
        perPaperFactor = int.Parse(xe.Elements(XName.Get("PerPaperFactor")).First().Value);
        this._no = int.Parse(xe.Elements(XName.Get("NO")).First().Value);
    }

    using (LocalReportHelper printHelper = new LocalReportHelper(reportPath)) {
        printHelper.PrintTypeNO = this._no;
        printHelper.PrintLogInformation = printLog;
        printHelper.ExportImageDeviceInfo.DpiX = dpiX;
        printHelper.ExportImageDeviceInfo.DpiY = dpiY;
        printHelper.ExportImageDeviceInfo.PageWidth = pageWidth;
        printHelper.ExportImageDeviceInfo.PageHeight = pageHeight;
        foreach (BarcodeData bdCurrent in this._listBarcodeData) {
            if (worker.CancellationPending == true) {
                e.Cancel = true;
                break;
            }
            else {
                try {
                    DataSet dsCurrent = this.GetDataForPrinterByBarcode(bdCurrent.Barcode, bdCurrent.IncreaseType);
                    DataSet dsNext = null, dsPrevious = dsCurrent.Copy();

                    int amount = this._printType == 0 ? 1 : bdCurrent.Amount - nextRemainder;
                    int copies = amount / perPaperFactor;
                    int remainder = nextRemainder = amount % perPaperFactor;

                    Action<DataSet, int, string, int> actPrint = (ds, duplicates, barcodes, amountForLog) => {
                        printHelper.PrintLogInformation.Barcode = barcodes;
                        printHelper.PrintLogInformation.Amount = amountForLog;
                        if (this.PrintType == 0 && DeviceType == DeviceType.DRV) {
                            printerSettings.Copies = (short)duplicates;
                            printHelper.WindowsDriverPrint(printerSettings, dpiX, ds);
                        }
                        else {
                            printHelper.OriginalPrint(DeviceType, ds, duplicates, PrintParam);
                        }
                    };

                    if (copies > 0) {
                        int amountForCopy = copies;
                        if (perPaperFactor > 1) {
                            DataSet dsCurrentCopy = dsCurrent.CopyForBarcode();
                            dsCurrent.Merge(dsCurrentCopy);
                            amountForCopy = copies * perPaperFactor;
                        }

                        actPrint.Invoke(dsCurrent, copies, bdCurrent.Barcode, amountForCopy);
                    }
                    if (remainder > 0) {
                        int nextIndex = i + 1;
                        string barcodes = bdCurrent.Barcode;
                        if (nextIndex < count) {
                            BarcodeData bdNext = this._listBarcodeData[nextIndex];
                            dsNext = this.GetDataForPrinterByBarcode(bdNext.Barcode, bdNext.IncreaseType);
                            dsPrevious.Merge(dsNext);
                            barcodes += "," + bdNext.Barcode;
                        }
                        actPrint.Invoke(dsPrevious, 1, barcodes, 1);
                    }
                    worker.ReportProgress(i++, string.Format("正在生成 {0} 并输送往打印机...", bdCurrent.Barcode));

                    if (this._printType == 0) {
                        count = 1;
                        flag = true;
                        break;
                    }
                }
                catch (Exception ex) {
                    flag = false;
                    e.Result = ex.Message;
                    break;
                }
            }
        }
        if (!e.Cancel && flag) {
            e.Result = string.Format("打印操作成功完成，共处理条码 {0} 条", count);
        }
    }
}

 

LocalReportHelper类代码：

using System;
using System.Configuration;
using System.Data;
using System.Drawing;
using System.Drawing.Imaging;
using System.Drawing.Printing;
using System.IO;
using System.Text;
using System.Windows.Forms;
using Microsoft.Reporting.WinForms;
using Umisky.BarcodePrint.Core;
namespace Umisky.BarcodePrint.Codes {
public class LocalReportHelper : IDisposable {

        #region Properties
public String LocalReportPath { get; set; }
public LocalReport LocalReportInstance { get; private set; }
public GraphDeviceInfo ExportImageDeviceInfo { get; set; }
public PrintLog PrintLogInformation { get; set; }
public int PrintTypeNO { get; set; }

        #endregion
private Stream _stream;
private int _bmpDPI;
private DataSet _ds;
public LocalReportHelper(String reportPath)
            : this(reportPath, new GraphDeviceInfo() {
                ColorDepth = 1,
                DpiX = 203,
                DpiY = 203,
                PageWidth = 8f,
                PageHeight = 12.2f,
                MarginTop = 0.2f
            }) { }
public LocalReportHelper(String reportPath, GraphDeviceInfo deviceInfo) {
this._bmpDPI = 96;
this.LocalReportPath = reportPath;
this.ExportImageDeviceInfo = deviceInfo;
this.LocalReportInstance = new LocalReport() { ReportPath = reportPath };
this.LocalReportInstance.SubreportProcessing += new SubreportProcessingEventHandler(LocalReportInstance_SubreportProcessing);
        }
private void LocalReportInstance_SubreportProcessing(object sender, SubreportProcessingEventArgs e) {
foreach (DataTable dt in this._ds.Tables) {
                e.DataSources.Add(new ReportDataSource(dt.TableName, dt));
            }
        }
public void Dispose() {
this.ExportImageDeviceInfo = null;
this.LocalReportInstance = null;
this.LocalReportPath = null;
this._ds = null;
        }
public void AddReportParameter(string paramName, string value) {
this.LocalReportInstance.SetParameters(new ReportParameter(paramName, value));
        }

        #region Export hang title image by reporting services
private void AddWashIcones() {
this.LocalReportInstance.EnableExternalImages = true;
this.LocalReportInstance.SetParameters(new ReportParameter("AppPath", Application.StartupPath));
        }
private void AddBarcodesAssembly() {
this.LocalReportInstance.AddTrustedCodeModuleInCurrentAppDomain(ConfigurationManager.AppSettings["BarcodesAssembly"]);
        }
private Stream CreateStreamCallBack(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek) {
string tempFolderPath = string.Concat(Environment.GetEnvironmentVariable("TEMP"), "/");
this._stream = new FileStream(string.Concat(tempFolderPath, name, ".", fileNameExtension), FileMode.Create);
return this._stream;
        }
private void Export() {
if (string.IsNullOrEmpty(this.LocalReportPath) ||
this.LocalReportInstance == null ||
this.ExportImageDeviceInfo == null) {
throw new InvalidExpressionException("Invalid parameters");
            }
if (this.PrintTypeNO >= -1 || this.PrintTypeNO == -3) {
this.AddBarcodesAssembly();
if (this.PrintTypeNO >= 0) {
this.AddWashIcones();
                }
            }
if (this.PrintTypeNO >= 0) {
this.LocalReportInstance.DataSources.Clear();
foreach (DataTable dt in this._ds.Tables) {
this.LocalReportInstance.DataSources.Add(new ReportDataSource(dt.TableName, dt));
                }
            }
this.LocalReportInstance.Refresh();
if (this._stream != null) {
this._stream.Close();
this._stream = null;
            }
            Warning[] warnings;
this.LocalReportInstance.Render(
"Image",
this.ExportImageDeviceInfo.ToString(),
                PageCountMode.Actual,
                CreateStreamCallBack,
out warnings);
this._stream.Position = 0;
        }
private void SaveLog() {
using (Bitmap image = (Bitmap)Image.FromStream(this._stream)) {
                image.SetResolution(96, 96);
using (MemoryStream ms = new MemoryStream()) {
                    image.Save(ms, ImageFormat.Jpeg);
this.PrintLogInformation.BarcodeImage = ms.ToArray();
                }
            }
            LogHelper.AddLog(this.PrintLogInformation);
if (this._stream != null) {
this._stream.Close();
this._stream = null;
            }
        }

        #endregion

        #region Windows driver print
private void PrintPage(object sender, PrintPageEventArgs ev) {
            Bitmap bmp = (Bitmap)Image.FromStream(this._stream);
            bmp.SetResolution(this._bmpDPI, this._bmpDPI);
            ev.Graphics.DrawImage(bmp, 0, 0);
            ev.HasMorePages = false;
        }
/// <summary>
/// Print by windows driver
/// </summary>
/// <param name="printerSettings">.net framework PrinterSettings class, including some printer information</param>
/// <param name="bmpDPI">the bitmap image resoluation, dots per inch</param>
public void WindowsDriverPrint(PrinterSettings printerSettings, int bmpDPI, DataSet ds) {
this._ds = ds;
this.Export();
if (this._stream == null) {
return;
            }
this._bmpDPI = bmpDPI;
            PrintDocument printDoc = new PrintDocument();
            printDoc.DocumentName = "条码打印";
            printDoc.PrinterSettings = printerSettings;
            printDoc.PrintController = new StandardPrintController();
if (!printDoc.PrinterSettings.IsValid) {
if (this._stream != null) {
this._stream.Close();
this._stream = null;
                }
                MessageBox.Show("Printer found errors, Please contact your administrators！", "Print Error");
return;
            }
            printDoc.PrintPage += new PrintPageEventHandler(PrintPage);
            printDoc.Print();
this.SaveLog();
        }

        #endregion

        #region Original print
/// <summary>
/// Send the file to the printer or use the printer command
/// </summary>
/// <param name="deviceType">The port(LPT,COM,DRV) which the device connecting</param>
/// <param name="copies">Total number for print</param>
/// <param name="ds">The report datasource</param>
/// <param name="printParam">Print parameters</param>
/// <param name="printLanguage">The built-in printer programming language, you can choose EPL or ZPL</param>
public void OriginalPrint(DeviceType deviceType,
            DataSet ds,
int copies = 1,
string printParam = null,
            ProgrammingLanguage printLanguage = ProgrammingLanguage.ZPL) {
this._ds = ds;
this.Export();
if (this._stream == null) {
return;
            }
int port = 1;
int.TryParse(printParam, out port);
int length = (int)this._stream.Length;
byte[] bytes = new byte[length];
this._stream.Read(bytes, 0, length);
            ZebraPrintHelper.Copies = copies;
            ZebraPrintHelper.PrinterType = deviceType;
            ZebraPrintHelper.PrinterName = printParam;
            ZebraPrintHelper.Port = port;
            ZebraPrintHelper.PrinterProgrammingLanguage = printLanguage;
            ZebraPrintHelper.PrintGraphics(bytes);
        }

        #endregion
    }
}