Linux 添加新硬盘

1.识别分区和硬盘

在 /dev/ 目录下找到新的硬盘，sda 为本地硬盘，sda1、sda2.. 为分区，sdb 就是新添加的硬盘，如:

[root@wusuyuan ~]# ls -ltr /dev/sd*

brw-rw----. 1 root disk 8,  0 11月 14 14:12 /dev/sda

brw-rw----. 1 root disk 8,  3 11月 14 14:12 /dev/sda3

brw-rw----. 1 root disk 8,  2 11月 14 14:12 /dev/sda2

brw-rw----. 1 root disk 8,  1 11月 14 14:12 /dev/sda1

brw-rw----. 1 root disk 8, 16 11月 14 14:12 /dev/sdb

学习的机器为虚拟机，与真实的物理机器略有不同，真实的物理机器根据硬盘接口类型(IDE、SATA、SCSI、光纤通道和SAS)可能为hda、sda或其它的名称。

2.新硬盘分区

使用管理员权限对新的硬盘 /dev/sdb 分区:

[root@wusuyuan ~]# fdisk /dev/sdb   ####进入分区

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xb7ee5a9d.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

         switch off the mode (command 'c') and change display units to

         sectors (command 'u').

Command (m for help): m   #### 查询帮助

Command action

   a   toggle a bootable flag 

   b   edit bsd disklabel

   c   toggle the dos compatibility flag

   d   delete a partition

   l   list known partition types

   m   print this menu

   n   add a new partition

   o   create a new empty DOS partition table

   p   print the partition table

   q   quit without saving changes

   s   create a new empty Sun disklabel

   t   change a partition's system id

   u   change display/entry units

   v   verify the partition table

   w   write table to disk and exit

   x   extra functionality (experts only)

Command (m for help): n   ####创建新的分区

Command action

   e   extended

   p   primary partition (1-4)

e   ####选择分区类型(扩展分区、主分区)

Partition number (1-4): 1  ####分区数，这里分1个区

First cylinder (1-2610, default 1): 2610  ####这里输入分区大小，默认单位为mb

Command (m for help): p ####查看分区表信息

Disk /dev/sdb: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x35b64cad

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1            2610        2610        8032+   5  Extended

Command (m for help): w ####写入分区信息，如果未确定或想取消，输入q退出

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

在写入分区信息时要仔细核对和确认，写入分区信息后不可再更改。 分区完成后，新的硬盘还是不能使用的，需要进行格式化。

3.使用mkfs进行格式化硬盘分区

[sywu@wusuyuan ~]$ mkfs

Usage: mkfs [-V] [-t fstype] [fs-options] device [size]

 #-t 格式化分区类型,如 ext3、ext4

[root@wusuyuan ~]# mkfs -t ext4 /dev/sdb  #对分区进行格式化，类型为ext4

mke2fs 1.41.12 (17-May-2010)

/dev/sdb is entire device, not just one partition!

无论如何也要继续? (y,n) y

文件系统标签=

操作系统:Linux

块大小=4096 (log=2)

分块大小=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

1310720 inodes, 5242880 blocks

262144 blocks (5.00%) reserved for the super user

第一个数据块=0

Maximum filesystem blocks=4294967296

160 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000

正在写入inode表: 完成                            

Creating journal (32768 blocks): 完成

Writing superblocks and filesystem accounting information: 

完成

This filesystem will be automatically checked every 35 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

分区格式化完成后使用mount 命令装载新的分区:

[root@wusuyuan ~]# mount /dev/sdb /disk2 #装载分区 

[root@wusuyuan ~]# df -h  #查询分区

文件系统              容量  已用  可用 已用%% 挂载点

/dev/sda2              97G  9.9G   82G  11% /

tmpfs                 1.9G  200M  1.7G  11% /dev/shm

/dev/sda1             194M   52M  133M  28% /boot

/dev/sdb               20G  1.9G   17G  11% /disk2

4.配置新的分区自动装载

在/etc/fstab 中配置分区自动装载

[root@wusuyuan ~]# vim /etc/fstab #

# /etc/fstab

# Created by anaconda on Sun Jan  5 08:17:56 2014

#

# Accessible filesystems, by reference, are maintained under '/dev/disk'

# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

#

UUID=9c738ca5-810a-46ec-b896-57fc8286b2a5 /                       ext4    defaults        1 1

UUID=05b44d26-bd3a-4688-81e1-c83da70512a7 /boot                   ext4    defaults        1 2

UUID=7146f132-f77b-4a17-8686-d7c9c9be10ad swap                    swap    defaults        0 0

                                        

tmpfs                   /dev/shm                tmpfs   defaults        0 0

devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

sysfs                   /sys                    sysfs   defaults        0 0

proc                    /proc                   proc    defaults        0 0

/dev/sdb                /disk2                 ext4     defaults        1 2 #加入新的分区信息