ubuntu学习笔记2

安装jdk

<!--[if !supportLists]-->1.       <!--[endif]-->下载

wget http://download.oracle.com/otn-pub/java/jdk/6u31-b04/jdk-6u31-linux-i586.bin

<!--[if !supportLists]-->2.       <!--[endif]-->把jdk移到/usr/local/目录下

naxsu@ubuntu:~$ sudo mv jdk-6u31-linux-i586.bin /usr/local/

[sudo] password for naxsu:

<!--[if !supportLists]-->3.       <!--[endif]-->安装

naxsu@ubuntu:/usr/local$ ./jdk-6u31-linux-i586.bin

-bash: ./jdk-6u31-linux-i586.bin: Permission denied

 

提示没权限

方法一：在前面加上sudo sh

root@ubuntu:/usr/java#sudo sh ./ jdk-6u31-linux-i586.bin

方法二：加权限

root@ubuntu:/usr/java# sudo chmod u+x jdk-6u31-linux-i586.bin

root@ubuntu:/usr/java# ./ jdk-6u31-linux-i586.bin

 

naxsu@ubuntu:/usr/local$ sudo chmod u+x jdk-6u31-linux-i586.bin

naxsu@ubuntu:/usr/local$ sudo ./jdk-6u31-linux-i586.bin

出问题了，如下：

naxsu@ubuntu:/usr/local$ sudo ./jdk-6u31-linux-i586.bin ./jdk-6u31-linux-i586.bin: 1: ./jdk-6u31-linux-i586.bin: cannot open html: No such file ./jdk-6u31-linux-i586.bin: 2: ./jdk-6u31-linux-i586.bin: cannot open head: No such file ./jdk-6u31-linux-i586.bin: 3: ./jdk-6u31-linux-i586.bin: cannot open title: No such file ./jdk-6u31-linux-i586.bin: 3: ./jdk-6u31-linux-i586.bin: Request: not found ./jdk-6u31-linux-i586.bin: 4: ./jdk-6u31-linux-i586.bin: cannot open META: No such file ./jdk-6u31-linux-i586.bin: 5: ./jdk-6u31-linux-i586.bin: cannot open link: No such file ./jdk-6u31-linux-i586.bin: 6: ./jdk-6u31-linux-i586.bin: cannot open link: No such file : not foundlinux-i586.bin: 7: ./jdk-6u31-linux-i586.bin: ./jdk-6u31-linux-i586.bin: 8: ./jdk-6u31-linux-i586.bin: cannot open body: No such file ./jdk-6u31-linux-i586.bin: 9: ./jdk-6u31-linux-i586.bin: cannot open div: No such file ./jdk-6u31-linux-i586.bin: 10: ./jdk-6u31-linux-i586.bin: cannot open table: No such file ./jdk-6u31-linux-i586.bin: 11: ./jdk-6u31-linux-i586.bin: cannot open tr: No such file ./jdk-6u31-linux-i586.bin: 12: ./jdk-6u31-linux-i586.bin: Syntax error: redirection unexpected

用vi编辑器打开，竟是一个网页。

 

只能到官网下载JDK了

 

用VMware Workstation虚拟机来识别USB设备(如U盘)的方法

　首先，要使VM虚拟机能够识别USB设备，也就像Windows中的找到新硬件提示一样，打开虚拟机，运行后，插入USB设备（该设备已被Windows识别），然后按照图示方式选择Removable Devices,选择USB Device，然后在VM的右下角会出现USB设备图标，证明已经被VM识别出来了。

其次，因为在Linux系统中要读取U盘设备，必须通过文件挂载的方式来访问，即把USB设备也当成文件来访问，要挂载设备，首先要知道其设备名，然后在利用挂载命令挂载，可以用fdisk –l或者dmesg命令获得USB设备的设备名假设为sdb1，然后新建一个文件夹目录比如mkdir myusb ,再利用mount –t –vfat 设备名 挂载目录命令挂载，这里可使用mount –t –vfat sdb1 myusb，然后就可以通过myusb目录访问USB设备上的内容。

最后，使用完毕之后要卸载USB，可以使用unmount挂载目录，或者unmount 设备名，即可使用unmount myusb或者unmount sdb1来卸载。

 

 

naxsu@ubuntu:/mnt$ sudo fdisk -l [sudo] password for naxsu:   Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00063e01      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *        2048    40894463    20446208   83  Linux /dev/sda2        40896510    41940991      522241    5  Extended /dev/sda5        40896512    41940991      522240   82  Linux swap / Solaris   Disk /dev/sdb: 4011 MB, 4011851776 bytes 255 heads, 63 sectors/track, 487 cylinders, total 7835648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00328b06      Device Boot      Start         End      Blocks   Id  System /dev/sdb1   *          63     7835647     3917792+   c  W95 FAT32 (LBA)

 

naxsu@ubuntu:~$ sudo mount /dev/sdb1 /mnt/myusb naxsu@ubuntu:~$ ls naxsu@ubuntu:~$ cd /mnt/myusb/ naxsu@ubuntu:/mnt/myusb$ sudo cp jdk-6u24-linux-i586.bin /usr/local/ naxsu@ubuntu:/usr/local$ sudo chmod u+x jdk-6u24-linux-i586.bin naxsu@ubuntu:/usr/local$ sudo ./jdk-6u24-linux-i586.bin ……… Press Enter to continue.....     Done.

 

配置环境变量

用vim编辑，没有就安装

naxsu@ubuntu:/usr/local/jdk1.6.0_24$ vim /etc/profile The program 'vim' can be found in the following packages:  * vim  * vim-gnome  * vim-tiny  * vim-athena  * vim-gtk  * vim-nox Try: sudo apt-get install <selected package> naxsu@ubuntu:/usr/local/jdk1.6.0_24$ sudo apt-get install vim   naxsu@ubuntu:/usr/local$ sudo vim /etc/profile 加入以下代码： #set java environment export JAVA_HOME= /usr/local/jdk1.6.0_24 export CLASSPATH=$CLASSPATH:$JAVA_HOME/lib:$JAVA_HOME/jre/lib export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATH:$HOMR/bin   下面才有效 export JAVA_HOME=/usr/local/jdk1.6.0_24 export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar export PATH=$JAVA_HOME/bin:$PATH

 

每次都用sudo太麻烦了，我们来激活root用户

naxsu@ubuntu:/usr/local$ sudo -s

root@ubuntu:/usr/local#

 

让当前配置立即生效 root@ubuntu:~# source /etc/profile 测试安装是否成功 root@ubuntu:~# echo $JAVA_HOME /usr/local/jdk1.6.0_24 root@ubuntu:~# echo $PATH /usr/local/jdk1.6.0_24/bin:/bin:/jre/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin root@ubuntu:~# echo $CLASSPATH .:/usr/local/jdk1.6.0_24/lib/dt.jar:/usr/local/jdk1.6.0_24/lib/tools.jar root@ubuntu:~# java -version java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07) Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode, sharing) root@ubuntu:~# 以上提示说明安装成功。

 

 

下一节，开始hodoop