Mac软件打开提示：已损坏，无法打开。您应该将它移到废纸娄 怎么解决?
文件损坏？尊嘟假嘟？
新入手的苹果电脑打开软件出现：“已损坏，无法打开。您应该将它移到废纸娄” 或 “已损坏，打不开。推出磁盘映像”。这个怎么解决？
第一步：允许打开任何来源软件
1、点菜单栏搜索图标，输入：终端 ，找到后，点击打开，如下图：
2、输入以下命令：（复制粘贴进去），如下图：
sudo spctl --master-disable
3、回车！输入电脑密码
此代码是打开：系统偏好设置 – 安全性与隐私 中的【任何来源】，如下图：
第二步：解除 GateKeeper 安全机制
1. 再次打开终端：
输入命令：（复制粘贴进去，cr后面输入一个空格）
xattr -cr
注意⚠️：cr 后面输入一个空格！不要回车！
2. 从应用程序或桌面上，将出现已损坏的软件拖入终端中（xattr -cr 的后面）
拖入后命令组成结果如下图：
3. 回车执行后，重新打开软件，这时已经不再提示损坏了。
注意⚠️：Mac Ventura 13 以上系统，需要先前往系统设置–>隐私与安全性–>完整磁盘访问权限 中允许终端！然后才能操作，否则会遇到 Operation not permitted！
关于 com.apple.quarantine
从 macOS 10.5 开始，来自网络的文件被标记为com.apple.quarantinevia 扩展文件属性。在某些旧版本的 macOS（例如Mac OS X 10.6）中，用户空间扩展属性不会在保存在常见的Cocoa应用程序（TextEdit、Preview 等）中时保留。
com.apple.quarantine—Tagging files downloaded from the Internet as possibly untrustworthy, storing the application used to download them, among other things.
当打开没有签名的 Mac 应用时，可能会报 “App can’t be opened because it is from an unidentified developer” 的错误。这种安全机制叫做 GateKeeper。
删除这个属性，就可以去除app 的隔离性，实现打开软件。
补充知识：扩展文件属性
扩展文件属性是文件系统功能，使用户能够将计算机文件与文件系统不解释的元数据相关联，而常规属性具有由文件系统严格定义的目的（例如权限或创建和修改时间的记录）。与通常可以与最大文件大小一样大的forks不同，扩展属性的大小通常被限制为明显小于最大文件大小的值。典型用途包括存储文档的作者、纯文本文档的字符编码或校验和、加密哈希或数字证书和自主访问控制信息。
在类 Unix系统中，扩展属性通常缩写为xattr。
每个属性都包含名称和相关数据。该名称是一个以 null 结尾的 Unicode字符串。不存在名称空间限制（使其成为一个开放的 xattr系统），并且约定是使用反向 DNS 字符串（类似于Uniform Type Identifiers）作为属性名称。
macOS 支持使用类似 Linux 的 API 从文件或目录中列出、 获取、设置、和删除扩展属性。在命令行中，这些能力通过xattr实用程序公开。
Man xattr 可查看命令手册
Last login: Fri Feb 24 21:19:49 on ttys000
➜ ~ xattr /Applications/iTerm.app
com.apple.quarantine
➜ ~ xattr -l /Applications/iTerm.app
com.apple.quarantine: 01c1;63f0c653;Homebrew\x20Cask;0D2B9537-08B4-4AC7-ABD1-8D6E3BFA078C
➜ ~ clear
XATTR(1) General Commands Manual XATTR(1)
NAME
xattr – display and manipulate extended attributes
SYNOPSIS
xattr [-lrsvx] file ...
xattr -p [-lrsvx] attr_name file ...
xattr -w [-rsx] attr_name attr_value file ...
xattr -d [-rsv] attr_name file ...
xattr -c [-rsv] file ...
xattr -h | --help
DESCRIPTION
The xattr command can be used to display, modify or remove the extended
attributes of one or more files, including directories and symbolic links.
Extended attributes are arbitrary metadata stored with a file, but separate
from the filesystem attributes (such as modification time or file size).
The metadata is often a null-terminated UTF-8 string, but can also be
arbitrary binary data.
One or more files may be specified on the command line. For the first two
forms of the command, when there are more than one file, the file name is
displayed along with the actual results. When only one file is specified,
the display of the file name is usually suppressed (unless the -v option
described below, is also specified).
In the first form of the command (without any other mode option specified),
the names of all extended attributes are listed. Attribute names can also
be displayed using “ls -l@”.
In the second form, using the -p option (“print”), the value associated
with the given attribute name is displayed. Attribute values are usually
displayed as strings. However, if nils are detected in the data, the value
is displayed in a hexadecimal representation.
The third form, with the -w option (“write”), causes the given attribute
name to be assigned the given value.
The fourth form, with the -d option (“delete”), causes the given attribute
name (and associated value), to be removed.
In the fifth form, with the -c option (“clear”), causes all attributes
(including their associated values), to be removed.
Finally, the last form, with either the -h or --help option, displays a
short help message and exits immediately.
OPTIONS
-l By default, the first two command forms either displays just the
attribute names or values, respectively. The -l option causes both the
attribute names and corresponding values to be displayed. For
hexadecimal display of values, the output is preceeded with the
hexadecimal offset values and followed by ASCII display, enclosed by
“|”.
-r If a file argument is a directory, act as if the entire contents of the
directory recursively were also specified (so that every file in the
directory tree is acted upon).
-s If a file argument is a symbolic link, act on the symbolic link itself,
rather than the file that the symbolic link points at.
-v Force the file name to be displayed, even for a single file.
-x Force the attribute value to be displayed in the hexadecimal
representation.
The -w option normally assumes the input attribute value is a string.
Specifying the -x option causes xattr to expect the input in
hexadecimal (whitespace is ignored). The xxd(1) command can be used to
create hexadecimal representations from exising binary data, to pass to
xattr.
EXIT STATUS
The xattr command exits with zero status on success. On error, non-zero is
returned, and an error message is printed to the standard error. For
system call errors, both the error code and error string are printed (see
getxattr(2), listxattr(2), removexattr(2) and setxattr(2) for a complete
list of possible error codes).
Some attribute data may have a fixed length that is enforced by the system.
For example,
% xattr -w com.apple.FinderInfo 0 foo
xattr: [Errno 34] Result too large: 'foo'
The com.apple.FinderInfo attribute must be 32 bytes in length.
EXAMPLES
This example copies the com.apple.FinderInfo attribute from the /usr
directory to the MyDir directory:
% xattr -px com.apple.FinderInfo /usr
00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
% xattr -l MyDir
% xattr -wx com.apple.FinderInfo \
"`xattr -px com.apple.FinderInfo /usr`" MyDir
% xattr -l MyDir
com.apple.FinderInfo:
00000000 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 |........@
.......|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.........
.......|
00000020
SEE ALSO
ls(1), xxd(1), getxattr(2), listxattr(2), removexattr(2), setxattr(2)
macOS 12.6 November 29, 2010 macOS 12.6
(END)命令行选项
参考文档：
File System Programming Guide
How to View & Remove Extended Attributes from a File on Mac OS
macos - How do I remove the "extended attributes" on a file in Mac OS X? - Stack Overflow