C#多线程实现方法——Task/Task.Factary
原文:
C#多线程实现方法——Task/Task.Factary
Task
使用
Task以及Task.Factory都是在.Net 4引用的。Task跟Thread很类似，通过下面例子可以看到。
static public void ThreadMain()
{
Thread t1 = new Thread(TaskWorker);
t1.Start(3);
}
static public void TaskMain()
{
Task t1 = new Task(TaskWorker, 3, TaskCreationOptions.PreferFairness | TaskCreationOptions.LongRunning | TaskCreationOptions.AttachedToParent);
Console.WriteLine(t1.Status);
t1.Start();
t1.Wait(); // need to wait for finishing.
}
static public void TaskWorker(object state)
{
int nTime = (int)state;
for (int i = 0; i < nTime; i++)
{
Thread.Sleep(100);
Console.WriteLine(string.Format("current thread {0} sleep for {1} miniseconds .", Task.CurrentId, (i + 1) * 100));
}
return;
}
我们看到TaskWorker都是用于Task以及Thread，都是只能接受一个参数（Action<object>），不过task可以支持工作函数具有返回值（Func<TRessult>()或者Func<object, TResult>）。但是弱的类型输入跟thread一样。Task提供返回值是为了后面说到的task结构层次有用。
下面是调用一个具有返回值的工作函数
static public int TaskWorkerWithReturn(object state)
{
int nTime = (int)state;
for (int i = 0; i < nTime; i++)
{
Thread.Sleep(100);
Console.WriteLine(string.Format("current thread {0} sleep for {1} miniseconds .", Task.CurrentId, (i + 1) * 100));
}
nTime++;
return nTime;
}
主调函数为：
Task<int> t2 = new Task<int>(TaskWorkerWithReturn, 3, TaskCreationOptions.PreferFairness | TaskCreationOptions.LongRunning | TaskCreationOptions.AttachedToParent);
t2.Start();
t2.Wait();
Console.WriteLine(t2.Result);不管从工作函数是否有返回值，task都需要在其运行过程中至少有一个前台线程在跑，否则会直接退出，根本原因是所有task都是后台线程。task的工作函数的输入参数类型职能是object。
同步
对于没有返回值的工作函数需要通过内核对象来同步主调线程（例如task内置的事件，使用wait来阻塞等待）；
对于有返回值的工作函数可以通过访问其Result函数来实现阻塞等待。
static public int TaskWorkerWithReturn(object state)
{
int nTime = (int)state;
for (int i = 0; i < nTime; i++)
{
Thread.Sleep(100);
Console.WriteLine(string.Format("current thread {0} sleep for {1} miniseconds .", Task.CurrentId, (i + 1) * 100));
}
nTime++;
return nTime;
}
主调函数：
Task<int> t2 = new Task<int>(TaskWorkerWithReturn, 3, TaskCreationOptions.PreferFairness | TaskCreationOptions.LongRunning | TaskCreationOptions.AttachedToParent);
t2.Start();
Console.WriteLine("t2:" + t2.Result);
异步调用
作为新的一个特性在.net 4中引入，task能实现丰富的异步调用，使用成员函数ContinueWith来响应异步工作函数的完成，注意，不一定由之前完成异步函数的线程执行。
static public void TaskMain()
{
Task<int> t3 = new Task<int>(FirstTask, 1);
t3.Start();
Task<int> t4 = t3.ContinueWith<int>(RecusiveTask);
Task<int> t5 = t4.ContinueWith<int>(RecusiveTask);
Task<int> t6 = t5.ContinueWith<int>(RecusiveTask).ContinueWith<int>(RecusiveTask);
//Console.WriteLine(string.Format("final result: {0}", t6.Result));
}
static public int FirstTask(object state)
{
int data = (int)state;
for (int i = 0; i < data; i++)
{
Thread.Sleep(100);
Console.WriteLine(string.Format("current thread {0} slept for {1} milisecond.", Task.CurrentId, (i + 1) * 100));
}
data++;
return data;
}
static public int RecusiveTask(Task<int> T)
{
int data = T.Result;
for (int i = 0; i < data; i++)
{
Thread.Sleep(100);
Console.WriteLine(string.Format("current thread {0} slept for {1} milisecond.", Task.CurrentId, (i + 1) * 100));
}
data++;
return data;
}输出结果为：
current thread 1 slept for 100 milisecond. current thread 2 slept for 100 milisecond. current thread 2 slept for 200 milisecond. current thread 3 slept for 100 milisecond. current thread 3 slept for 200 milisecond. current thread 3 slept for 300 milisecond. current thread 4 slept for 100 milisecond. current thread 4 slept for 200 milisecond. current thread 4 slept for 300 milisecond. current thread 4 slept for 400 milisecond. current thread 5 slept for 100 milisecond. current thread 5 slept for 200 milisecond. current thread 5 slept for 300 milisecond. current thread 5 slept for 400 milisecond. current thread 5 slept for 500 milisecond. final result: 6 请按任意键继续. . .