iBatis分页

iBatis默认的分页是采用游标滚动的方式来实现的，这种方式在大数据量的情况下便会OOM了，因此一般都采用手写分页SQL语句使用数据库物理分页方式实现，参考了网上很多网友所写的如何实现像hibernate一样使用方言的方式来实现分页功能，基本上千篇一律都是继承com.ibatis.sqlmap.engine.execution.SqlExecutor类然后在spring中进行注入等等，操作复杂编码甚多，方法不可取。
    另外还有些是修改iBatis的jar包来实现，本人觉得这种方法更不可取。
    基于网友们的思想，自己实现了另一种方法，不用修改源码，不用在spring中做任何配置即可实现物理分页功能：
条件
    1、JVM类的加载是通过Class.forName(String cls)来实现，根据这个原理可以自己写一个与com.ibatis.sqlmap.engine.execution.SqlExecutor同名类；
    2、java web类的加载顺序是：首先是web容器的相关类与jar包，然后是web工程下面WEB-INF/classes/下的所有类，最后才是WEB-INF/lib下的所有jar包；
    有了以上的先决条件就好办了，可以在你的项目src目录下建包com.ibatis.sqlmap.engine.execution，然后在此包下建类SqlExecutor，然后把iBatis包下的这个类的源码复制进来后做小小改动，原来的executeQuery方法改成私有、换名，换成什么名称随便，然后新建一个公有的executeQuery方法，分页功能就在这个方法体内实现；
这样一来，web容器首会找到WEB-INF/classes下的com.ibatis.sqlmap.engine.execution.SqlExecutor这个类，因而会忽略掉在ibatis包中的这个类，即实现了自定义的分页功能，又不用去破坏ibatis的包；
    还有一点，也可以将自定义的这个类打成jar包放到lib中去，不过这时就要注意了，jar包的名称一定要在ibatis包的名称之前，也就是说ibatis-2.3.4.726.jar，那么这个jar就可以写成ibatis-2.3.4.725.jar，或者字母在ibatis这几个字母之前，这样才能正确加载自己写的那个类。
贴上代码：
SqlExecutor.java

/*
 *  Copyright 2004 Clinton Begin
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */
 package com.ibatis.sqlmap.engine.execution;

 import java.sql.BatchUpdateException;
 import java.sql.CallableStatement;
 import java.sql.Connection;
 import java.sql.PreparedStatement;
 import java.sql.ResultSet;
 import java.sql.SQLException;
 import java.sql.Statement;
 import java.sql.Types;
 import java.util.ArrayList;
 import java.util.List;

 import org.apache.commons.logging.Log;
 import org.apache.commons.logging.LogFactory;

 import com.ibatis.sqlmap.engine.impl.SqlMapClientImpl;
 import com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate;
 import com.ibatis.sqlmap.engine.mapping.parameter.ParameterMap;
 import com.ibatis.sqlmap.engine.mapping.parameter.ParameterMapping;
 import com.ibatis.sqlmap.engine.mapping.result.ResultMap;
 import com.ibatis.sqlmap.engine.mapping.result.ResultObjectFactoryUtil;
 import com.ibatis.sqlmap.engine.mapping.statement.DefaultRowHandler;
 import com.ibatis.sqlmap.engine.mapping.statement.MappedStatement;
 import com.ibatis.sqlmap.engine.mapping.statement.RowHandlerCallback;
 import com.ibatis.sqlmap.engine.scope.ErrorContext;
 import com.ibatis.sqlmap.engine.scope.SessionScope;
 import com.ibatis.sqlmap.engine.scope.StatementScope;

 /**
 * Class responsible for executing the SQL
 */
 @SuppressWarnings ("unchecked")
 public class SqlExecutor {

     private static final Log log = LogFactory.getLog(SqlExecutor.class);
     //
     // Constants
     //
     /**
     * Constant to let us know not to skip anything
     */
     public static final int NO_SKIPPED_RESULTS = 0;
     /**
     * Constant to let us know to include all records
     */
     public static final int NO_MAXIMUM_RESULTS = -999999;

     public SqlExecutor() {
         log.info("Custom class 'SqlExecutor' Initialization");
    }

     //
     // Public Methods
     //

     /**
     * Execute an update
     *
     * @param statementScope
     *            - the request scope
     * @param conn
     *            - the database connection
     * @param sql
     *            - the sql statement to execute
     * @param parameters
     *            - the parameters for the sql statement
     * @return - the number of records changed
     * @throws SQLException
     *             - if the update fails
     */
     public int executeUpdate(StatementScope statementScope, Connection conn,
             String sql, Object[] parameters) throws SQLException {
        ErrorContext errorContext = statementScope.getErrorContext();
         errorContext.setActivity("executing update");
        errorContext.setObjectId(sql);
         PreparedStatement ps = null;
        setupResultObjectFactory(statementScope);
         int rows = 0;
         try {
            errorContext
                     .setMoreInfo("Check the SQL Statement (preparation failed).");
            ps = prepareStatement(statementScope.getSession(), conn, sql);
            setStatementTimeout(statementScope.getStatement(), ps);
            errorContext
                     .setMoreInfo("Check the parameters (set parameters failed).");
            statementScope.getParameterMap().setParameters(statementScope, ps,
                    parameters);
             errorContext.setMoreInfo("Check the statement (update failed).");
            ps.execute();
            rows = ps.getUpdateCount();
         } finally {
            closeStatement(statementScope.getSession(), ps);
        }
         return rows;
    }

     /**
     * Adds a statement to a batch
     *
     * @param statementScope
     *            - the request scope
     * @param conn
     *            - the database connection
     * @param sql
     *            - the sql statement
     * @param parameters
     *            - the parameters for the statement
     * @throws SQLException
     *             - if the statement fails
     */
     public void addBatch(StatementScope statementScope, Connection conn,
             String sql, Object[] parameters) throws SQLException {
        Batch batch = (Batch) statementScope.getSession().getBatch();
         if (batch == null) {
             batch = new Batch();
            statementScope.getSession().setBatch(batch);
        }
        batch.addBatch(statementScope, conn, sql, parameters);
    }

     /**
     * Execute a batch of statements
     *
     * @param sessionScope
     *            - the session scope
     * @return - the number of rows impacted by the batch
     * @throws SQLException
     *             - if a statement fails
     */
     public int executeBatch(SessionScope sessionScope) throws SQLException {
         int rows = 0;
        Batch batch = (Batch) sessionScope.getBatch();
         if (batch != null) {
             try {
                rows = batch.executeBatch();
             } finally {
                batch.cleanupBatch(sessionScope);
            }
        }
         return rows;
    }

     /**
     * Execute a batch of statements
     *
     * @param sessionScope
     *            - the session scope
     * @return - a List of BatchResult objects (may be null if no batch has been
     *         initiated). There will be one BatchResult object in the list for
     *         each sub-batch executed
     * @throws SQLException
     *             if a database access error occurs, or the drive does not
     *             support batch statements
     * @throws BatchException
     *             if the driver throws BatchUpdateException
     */
     public List executeBatchDetailed(SessionScope sessionScope)
             throws SQLException, BatchException {
         List answer = null;
        Batch batch = (Batch) sessionScope.getBatch();
         if (batch != null) {
             try {
                answer = batch.executeBatchDetailed();
             } finally {
                batch.cleanupBatch(sessionScope);
            }
        }
         return answer;
    }

     /**
     * Long form of the method to execute a query
     *
     * @param statementScope
     *            - the request scope
     * @param conn
     *            - the database connection
     * @param sql
     *            - the SQL statement to execute
     * @param parameters
     *            - the parameters for the statement
     * @param skipResults
     *            - the number of results to skip
     * @param maxResults
     *            - the maximum number of results to return
     * @param callback
     *            - the row handler for the query
     * @throws SQLException
     *             - if the query fails
     */
 //------------------------------- 分页代码重写(start) ------------------------------------//
     //重写executeQuery方法，首先判断是否分页查询，分页查询先将分页SQL语句构建，然后执行iBatis默认的查询
     public void executeQuery(StatementScope statementScope, Connection conn,
             String sql, Object[] parameters, int skipResults, int maxResults,
             RowHandlerCallback callback) throws SQLException {
         //取数据库产品名称
        String dbName = conn.getMetaData().getDatabaseProductName();

         int len = sql.length();

         //判断是否分页
         if ((skipResults != NO_SKIPPED_RESULTS || maxResults != NO_MAXIMUM_RESULTS)) {
             //根据数据库产品名称取对应的分页SQL语句
            sql = Dialect.getLimitString(dbName, sql, skipResults, maxResults);

             //分页语句是否存在
             if (sql.length() != len) {
                skipResults = NO_SKIPPED_RESULTS;
                maxResults = NO_MAXIMUM_RESULTS;
            }
        }
        iBatisExecuteQuery(statementScope, conn, sql, parameters, skipResults,
                maxResults, callback);
    }

     //iBatis包中默认的executeQuery方法
     private void iBatisExecuteQuery(StatementScope statementScope,
             Connection conn, String sql, Object[] parameters, int skipResults,
             int maxResults, RowHandlerCallback callback) throws SQLException {
        ErrorContext errorContext = statementScope.getErrorContext();
         errorContext.setActivity("executing query");
        errorContext.setObjectId(sql);
         PreparedStatement ps = null;
         ResultSet rs = null;
        setupResultObjectFactory(statementScope);
         try {
            errorContext
                     .setMoreInfo("Check the SQL Statement (preparation failed).");
            Integer rsType = statementScope.getStatement().getResultSetType();
             if (rsType != null) {
                ps = prepareStatement(statementScope.getSession(), conn, sql,
                        rsType);
             } else {
                ps = prepareStatement(statementScope.getSession(), conn, sql);
            }
            setStatementTimeout(statementScope.getStatement(), ps);
            Integer fetchSize = statementScope.getStatement().getFetchSize();
             if (fetchSize != null) {
                ps.setFetchSize(fetchSize.intValue());
            }
            errorContext
                     .setMoreInfo("Check the parameters (set parameters failed).");
            statementScope.getParameterMap().setParameters(statementScope, ps,
                    parameters);
             errorContext.setMoreInfo("Check the statement (query failed).");
            ps.execute();
            errorContext
                     .setMoreInfo("Check the results (failed to retrieve results).");

             // Begin ResultSet Handling
            rs = handleMultipleResults(ps, statementScope, skipResults,
                    maxResults, callback);
             // End ResultSet Handling
         } finally {
             try {
                closeResultSet(rs);
             } finally {
                closeStatement(statementScope.getSession(), ps);
            }
        }
    }
 //-------------------- 分页代码重写(end) -------------------------------------//
     /**
     * Execute a stored procedure that updates data
     *
     * @param statementScope
     *            - the request scope
     * @param conn
     *            - the database connection
     * @param sql
     *            - the SQL to call the procedure
     * @param parameters
     *            - the parameters for the procedure
     * @return - the rows impacted by the procedure
     * @throws SQLException
     *             - if the procedure fails
     */
     public int executeUpdateProcedure(StatementScope statementScope,
            Connection conn, String sql, Object[] parameters)
             throws SQLException {
        ErrorContext errorContext = statementScope.getErrorContext();
         errorContext.setActivity("executing update procedure");
        errorContext.setObjectId(sql);
         CallableStatement cs = null;
        setupResultObjectFactory(statementScope);
         int rows = 0;
         try {
            errorContext
                     .setMoreInfo("Check the SQL Statement (preparation failed).");
            cs = prepareCall(statementScope.getSession(), conn, sql);
            setStatementTimeout(statementScope.getStatement(), cs);
            ParameterMap parameterMap = statementScope.getParameterMap();
            ParameterMapping[] mappings = parameterMap.getParameterMappings();
            errorContext
                     .setMoreInfo("Check the output parameters (register output parameters failed).");
            registerOutputParameters(cs, mappings);
            errorContext
                     .setMoreInfo("Check the parameters (set parameters failed).");
            parameterMap.setParameters(statementScope, cs, parameters);
            errorContext
                     .setMoreInfo("Check the statement (update procedure failed).");
            cs.execute();
            rows = cs.getUpdateCount();
            errorContext
                     .setMoreInfo("Check the output parameters (retrieval of output parameters failed).");
            retrieveOutputParameters(statementScope, cs, mappings, parameters,
                     null);
         } finally {
            closeStatement(statementScope.getSession(), cs);
        }
         return rows;
    }

     /**
     * Execute a stored procedure
     *
     * @param statementScope
     *            - the request scope
     * @param conn
     *            - the database connection
     * @param sql
     *            - the sql to call the procedure
     * @param parameters
     *            - the parameters for the procedure
     * @param skipResults
     *            - the number of results to skip
     * @param maxResults
     *            - the maximum number of results to return
     * @param callback
     *            - a row handler for processing the results
     * @throws SQLException
     *             - if the procedure fails
     */
     public void executeQueryProcedure(StatementScope statementScope,
             Connection conn, String sql, Object[] parameters, int skipResults,
             int maxResults, RowHandlerCallback callback) throws SQLException {
        ErrorContext errorContext = statementScope.getErrorContext();
         errorContext.setActivity("executing query procedure");
        errorContext.setObjectId(sql);
         CallableStatement cs = null;
         ResultSet rs = null;
        setupResultObjectFactory(statementScope);
         try {
            errorContext
                     .setMoreInfo("Check the SQL Statement (preparation failed).");
            Integer rsType = statementScope.getStatement().getResultSetType();
             if (rsType != null) {
                cs = prepareCall(statementScope.getSession(), conn, sql, rsType);
             } else {
                cs = prepareCall(statementScope.getSession(), conn, sql);
            }
            setStatementTimeout(statementScope.getStatement(), cs);
            Integer fetchSize = statementScope.getStatement().getFetchSize();
             if (fetchSize != null) {
                cs.setFetchSize(fetchSize.intValue());
            }
            ParameterMap parameterMap = statementScope.getParameterMap();
            ParameterMapping[] mappings = parameterMap.getParameterMappings();
            errorContext
                     .setMoreInfo("Check the output parameters (register output parameters failed).");
            registerOutputParameters(cs, mappings);
            errorContext
                     .setMoreInfo("Check the parameters (set parameters failed).");
            parameterMap.setParameters(statementScope, cs, parameters);
            errorContext
                     .setMoreInfo("Check the statement (update procedure failed).");
            cs.execute();
            errorContext
                     .setMoreInfo("Check the results (failed to retrieve results).");

             // Begin ResultSet Handling
            rs = handleMultipleResults(cs, statementScope, skipResults,
                    maxResults, callback);
             // End ResultSet Handling
            errorContext
                     .setMoreInfo("Check the output parameters (retrieval of output parameters failed).");
            retrieveOutputParameters(statementScope, cs, mappings, parameters,
                    callback);

         } finally {
             try {
                closeResultSet(rs);
             } finally {
                closeStatement(statementScope.getSession(), cs);
            }
        }
    }

     private ResultSet handleMultipleResults(PreparedStatement ps,
             StatementScope statementScope, int skipResults, int maxResults,
             RowHandlerCallback callback) throws SQLException {
        ResultSet rs;
        rs = getFirstResultSet(statementScope, ps);
         if (rs != null) {
            handleResults(statementScope, rs, skipResults, maxResults, callback);
        }

         // Multiple ResultSet handling
         if (callback.getRowHandler() instanceof DefaultRowHandler) {
            MappedStatement statement = statementScope.getStatement();
            DefaultRowHandler defaultRowHandler = ((DefaultRowHandler) callback
                    .getRowHandler());
             if (statement.hasMultipleResultMaps()) {
                 List multipleResults = new ArrayList();
                multipleResults.add(defaultRowHandler.getList());
                ResultMap[] resultMaps = statement.getAdditionalResultMaps();
                 int i = 0;
                 while (moveToNextResultsSafely(statementScope, ps)) {
                     if (i >= resultMaps.length)
                         break;
                    ResultMap rm = resultMaps[i];
                    statementScope.setResultMap(rm);
                    rs = ps.getResultSet();
                     DefaultRowHandler rh = new DefaultRowHandler();
                    handleResults(statementScope, rs, skipResults, maxResults,
                             new RowHandlerCallback(rm, null, rh));
                    multipleResults.add(rh.getList());
                    i++;
                }
                defaultRowHandler.setList(multipleResults);
                statementScope.setResultMap(statement.getResultMap());
             } else {
                 while (moveToNextResultsSafely(statementScope, ps))
                    ;
            }
        }
         // End additional ResultSet handling
         return rs;
    }

     private ResultSet getFirstResultSet(StatementScope scope, Statement stmt)
             throws SQLException {
         ResultSet rs = null;
         boolean hasMoreResults = true;
         while (hasMoreResults) {
            rs = stmt.getResultSet();
             if (rs != null) {
                 break;

分享到：

ActiveMQ入门实例 | 因为未能分配专用虚拟内存，所以请求失败。 ...

• 2011-06-02 16:27
• 浏览 814
• 评论(0)
• 分类:编程语言
• 相关推荐

评论

发表评论

您还没有登录,请您登录后再发表评论