from:https://github.com/GoogleCloudPlatform/kubernetes/blob/master/docs/getting-started-guides/ubuntu.md
Kubernetes Deployment On Bare-metal Ubuntu Nodes
This document describes how to deploy kubernetes on ubuntu nodes, including 1 master node and 3 minion nodes, and people uses this approach can scale to any number of minion nodes by changing some settings with ease. The original idea was heavily inspired by @jainvipin 's ubuntu single node work, which has been merge into this document.
Cloud team from Zhejiang University will maintain this work.
Prerequisites：
1 The minion nodes have installed docker version 1.2+ and bridge-utils to manipulate linux bridge
2 All machines can communicate with each other, no need to connect Internet (should use private docker registry in this case)
3 These guide is tested OK on Ubuntu 14.04 LTS 64bit server, but it should also work on most Ubuntu versions
4 Dependences of this guide: etcd-2.0.9, flannel-0.4.0, k8s-0.18.0, but it may work with higher versions
5 All the remote servers can be ssh logged in without a password by using key authentication
Main Steps
I. Make kubernetes , etcd and flanneld binaries
First clone the kubernetes github repo, $ git clone https://github.com/GoogleCloudPlatform/kubernetes.git then $ cd kubernetes/cluster/ubuntu.
Then run $ ./build.sh, this will download all the needed binaries into ./binaries.
You can customize your etcd version, flannel version, k8s version by changing variable ETCD_VERSION , FLANNEL_VERSIONand K8S_VERSION in build.sh, default etcd version is 2.0.9, flannel version is 0.4.0 and K8s version is 0.18.0.
Please make sure that there are kube-apiserver, kube-controller-manager, kube-scheduler, kubelet, kube-proxy,etcd, etcdctl and flannel in the binaries/master or binaries/minion directory.
We used flannel here because we want to use overlay network, but please remember it is not the only choice, and it is also not a k8s' necessary dependence. Actually you can just build up k8s cluster natively, or use flannel, Open vSwitch or any other SDN tool you like, we just choose flannel here as a example.
II. Configure and start the kubernetes cluster
An example cluster is listed as below:
| 10.10.103.223 | minion |
| 10.10.103.162 | minion |
| 10.10.103.250 | both master and minion |
First configure the cluster information in cluster/ubuntu/config-default.sh, below is a simple sample.
export nodes="[email protected] [email protected] [email protected]"
export roles=("ai" "i" "i")
export NUM_MINIONS=${NUM_MINIONS:-3}
export SERVICE_CLUSTER_IP_RANGE=11.1.1.0/24
export FLANNEL_NET=172.16.0.0/16
The first variable nodes defines all your cluster nodes, MASTER node comes first and separated with blank space like<user_1@ip_1> <user_2@ip_2> <user_3@ip_3>
Then the roles variable defines the role of above machine in the same order, "ai" stands for machine acts as both master and minion, "a" stands for master, "i" stands for minion. So they are just defined the k8s cluster as the table above described.
The NUM_MINIONS variable defines the total number of minions.
The SERVICE_CLUSTER_IP_RANGE variable defines the kubernetes service IP range. Please make sure that you do have a valid private ip range defined here, because some IaaS provider may reserve private ips. You can use below three private network range accordin to rfc1918. Besides you'd better not choose the one that conflicts with your own private network range.
10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
The FLANNEL_NET variable defines the IP range used for flannel overlay network, should not conflict with aboveSERVICE_CLUSTER_IP_RANGE.
After all the above variable being set correctly. We can use below command in cluster/ directory to bring up the whole cluster.
$ KUBERNETES_PROVIDER=ubuntu ./kube-up.sh
The scripts is automatically scp binaries and config files to all the machines and start the k8s service on them. The only thing you need to do is to type the sudo password when promoted. The current machine name is shown below like. So you will not type in the wrong password.
Deploying minion on machine 10.10.103.223
...
[sudo] password to copy files and start minion:
If all things goes right, you will see the below message from console Cluster validation succeeded indicating the k8s is up.
All done !
You can also use kubectl command to see if the newly created k8s is working correctly. The kubectl binary is under thecluster/ubuntu/binaries directory. You can move it into your PATH. Then you can use the below command smoothly.
For example, use $ kubectl get nodes to see if all your minion nodes are in ready status. It may take some time for the minions ready to use like below.
NAME LABELS STATUS
10.10.103.162 kubernetes.io/hostname=10.10.103.162 Ready
10.10.103.223 kubernetes.io/hostname=10.10.103.223 Ready
10.10.103.250 kubernetes.io/hostname=10.10.103.250 Ready
Also you can run kubernetes guest-example to build a redis backend cluster on the k8s．
IV. Deploy addons
After the previous parts, you will have a working k8s cluster, this part will teach you how to deploy addones like dns onto the existing cluster.
The configuration of dns is configured in cluster/ubuntu/config-default.sh.
ENABLE_CLUSTER_DNS=true
DNS_SERVER_IP="192.168.3.10"
DNS_DOMAIN="kubernetes.local"
DNS_REPLICAS=1
The DNS_SERVER_IP is defining the ip of dns server which must be in the service_cluster_ip_range.
The DNS_REPLICAS describes how many dns pod running in the cluster.
After all the above variable have been set. Just type the below command
$ cd cluster/ubuntu
$ KUBERNETES_PROVIDER=ubuntu ./deployAddons.sh
After some time, you can use $ kubectl get pods to see the dns pod is running in the cluster. Done!
IV. Trouble Shooting
Generally, what this approach did is quite simple:
-
Download and copy binaries and configuration files to proper dirctories on every node
-
Configure
etcdusing IPs based on input from user -
Create and start flannel network
So, if you see a problem, check etcd configuration first
Please try:
-
Check
/var/log/upstart/etcd.logfor suspicious etcd log -
Check
/etc/default/etcd, as we do not have much input validation, a right config should be like:ETCD_OPTS="-name infra1 -initial-advertise-peer-urls <http://ip_of_this_node:2380> -listen-peer-urls <http://ip_of_this_node:2380> -initial-cluster-token etcd-cluster-1 -initial-cluster infra1=<http://ip_of_this_node:2380>,infra2=<http://ip_of_another_node:2380>,infra3=<http://ip_of_another_node:2380> -initial-cluster-state new" -
You can use below command
$ KUBERNETES_PROVIDER=ubuntu ./kube-down.shto bring down the cluster and run$ KUBERNETES_PROVIDER=ubuntu ./kube-up.shagain to start again. -
You can also customize your own settings in
/etc/default/{component_name}after configured success.
about single node:
modify the config-default file， remove two sub node's ip and roles, change the host node'ip to [email protected]
Problems:
1、about ssh, u need to general a keygen of ssh
http://roomfourteen224.iteye.com/admin/blogs/2217054
2、ssh: error: connect to host localhost port 22: Connection refused & denied with root password
http://roomfourteen224.iteye.com/admin/blogs/2217056
3、apt-get remove ssh-client ssh-server apt-get install ssh-client ssh-server