Vs2010 配置驱动开发环境

1、安装VS2010，安装WDK 7.0(DDK);

2、新建VC++->Empty Project
 

3、打开Configuration Manager  并新建一个名称为“ dirver ”的Solution Configuration 并将“dirver” 设为Active Solution Configuration .
 

4、打开View-> property Manager。
 

5、在"dirver"  solution configuration 上点击右键，选择Add new property Sheet。取名为“dirverProperty”. 并对他进下以下设置。
 

5.1. C\C++ - General - Debug Information Format = Program Database (/Zi)
5.2. C\C++ - Preprocessor - Preprocessor Definitions = _X86_ [add also DBG for Debug config]
【WIN32;_DEBUG;_X86_;i386;STD_CALL;CONDITION_HANDLING;WIN32_LEAN_AND_MEAN;NT_UP;SRVDBG;DBG;_IDWBUILD;_WIN32_WINNT=0x0400;% (PreprocessorDefinitions)】
5.3. C\C++ - Code Generation - Enable C++ Exceptions = No
5.4. C\C++ - Code Generation - Basic Runtime Checks = Default
5.5. C\C++ - Code Generation - Buffer Security Check = No (/GS-)
5.6. C\C++ - Advanced - Calling Convention = __stdcall (/Gz)
5.7. C\C++ - Advanced - Compile As = Compile as C Code (/TC) [if you are going to use plain C]
5.8. Linker - General - Output File = $(OutDir)\$(ProjectName).sys
5.9. Linker - General - Enable Incremental Linking = Default
5.10. Linker - Input - Additional Dependencies = ntoskrnl.lib hal.lib $(NOINHERIT) [add here needed libs here e.g. ntoskrnl.lib hal.lib]
【不知道上面是不是笔误，应该为：ntoskrnl.lib;hal.lib;%(AdditionalDependencies)】
5.11. Linker - Input - Ignore All Default Libraries = Yes (/NODEFAULTLIB)
5.12. Linker - Manifest File - Generate Manifest = No
5.13. Linker - System - SubSystem = Native (/SUBSYSTEM:NATIVE)
5.14. Linker - System - Driver = Driver (/DRIVER)
5.15. Linker - Advanced - Entry Point = DriverEntry
5.16. Linker - Advanced - Base Address = 0x10000
5.17. Linker - Advanced - Randomized Base Address = Disable (/DYNAMICBASE:NO)
【这个也是错误的：应该置空】
5.18. Linker - Advanced - Data Execution Prevention (DEP) = Disable (/NXCOMPAT:NO)
【这个也是错误的：应该置空】

6. Config VC++ Directories
6.1 Open Open up property manager by clicking on Menu View->Property Manager.
6.2 Expand the project node and then the Configuration|Platform nodes, you will see "Microsoft.cpp.<Platform>.users" file for each Configuration|Platform. These are the files

for the global settings, similar to the old tools/Options/VC++ Directories.
6.3 Multi-Select "Microsoft.cpp.<Platform>.users", right click and bring up the property page window
6.4 In the property page window, click on "VC++ Directories" (for example) in the left pane, add new paths for the directories such as "Include Directories". separated by

semicolons
(eg:Include Directories config As:
$(ddkroot)\INC
$(ddkroot)\INC\WNET
$(ddkroot)\INC\DDK\WNET
Library Directories config As:
$(ddkroot)\LIB\WNET\I386
)
6.5 Make sure to save the settings before shutting down Visual Studio.
6.6 Re-launch Visual Studio and the new settings will be in effect.
6.7 Note: If you would like to only change the settings for one project, you can right click on the project and bring up the property page. Change the settings for “VC++

Directories”, these settings will be persisted to the project file.
七. OK. Have done. Now you can test it with simple code, e.g.:

#include "ntddk.h"

NTSTATUS
DriverEntry(PDRIVER_OBJECT DriverObject,PUNICODE_STRING RegistryPath)
{
 return STATUS_UNSUCCESSFUL;
}

特别说明：
   1.
      Visual Studio 2010 在智能设备开发方面只支持Windows Phone OS 7.0。如果你要为Windows CE 5.0和Windows Mobile 6.5开发应用程序，请安装Visual Studio 2008。
   2.
      做驱动开发时，SDK的版本要和WDK的版本一致，即Win7 WDK要配Win7 SDK，否则会出现编译错误。VS2010里集成了Windows SDK 7.0A。
   3.
      如果出现类似如下编译错误，解决方法是：拷贝C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\sal.h，然后覆盖掉C:\WinDDK\7600.16385.1\inc\api\sal.h。

C:\Program Files\Microsoft Visual Studio 10.0\VC\include\crtdefs.h(550): error C2143: syntax error : missing ')' before 'const'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\crtdefs.h(550): error C2143: syntax error : missing '{' before 'const'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\crtdefs.h(550): error C2059: syntax error : ','
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\crtdefs.h(550): error C2059: syntax error : ')'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(56): error C2143: syntax error : missing ')' before 'type'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(56): error C2085: '_ExceptionRecord' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(57): error C2143: syntax error : missing ';' before 'type'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(57): error C2085: '_EstablisherFrame' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(58): error C2085: '_Inout_' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(58): error C2143: syntax error : missing ';' before 'type'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(58): error C2085: '_ContextRecord' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(59): error C2085: '_Inout_' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(59): error C2143: syntax error : missing ';' before 'type'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(60): error C2059: syntax error : ')'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(60): error C2085: '_DispatcherContext' : not in formal parameter list
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(104): error C2082: redefinition of formal parameter '_exception_code'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(105): error C2082: redefinition of formal parameter '_exception_info'
C:\Program Files\Microsoft Visual Studio 10.0\VC\include\excpt.h(106): error C2082: redefinition of formal parameter