Cisco AP base configure

此设置使用数字证书认证，一个SSID，无子接口。

aaa new-model
!
!
aaa group server radius rad_eap
 server 10.x.x.x auth-port 1645 acct-port 1646
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
!
aaa session-id common
!
!
dot11 syslog
!
dot11 ssid XXXX
   authentication open eap eap_methods
   authentication key-management wpa
   guest-mode
!
!
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers tkip
 !
 ssid XXXX
 !
 speed  basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface FastEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 10.x.x.x 255.255.255.0
 no ip route-cache
!
ip default-gateway 10.x.x.1
ip http server
no ip http secure-server
snmp-server community efeihu RO
radius-server host 10.x.x.x.x auth-port 1645 acct-port 1646 key xxxxxx
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
!        
end