linux查看分区类型
fdisk -l
df -Th
parted
----------------------------------------详解-------------------------------------
fdisk -l 命令查看一下
# fdisk -l
Disk /dev/sda: 12.8 GB, 12884901888 bytes
255 heads, 63 sectors/track, 1566 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0003bbd5
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1494 12000523+ 83 Linux
/dev/sda2 1495 1566 578340 5 Extended
/dev/sda5 1495 1566 578308+ 82 Linux swap / Solaris
查看硬盘是什么分区，使用fdisk -l，但是看不到文件系统类型，只能看到分区类型，以Redhat 9为例：
[root@redhat9 root]# fdisk -l
Disk /dev/sda: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 1012 8024467+ 83 Linux
/dev/sda3 1013 1044 257040 82 Linux swap
df -Th 命令
友好一些，容量大小是以易读的方式显示的，而且它是显示所有分区，并不是一个分区。这个命令最方便。
[root@redhat9 root]# df -Th
Filesystem Type Size Used Avail Use％ Mounted on
/dev/sda2 ext3 7.6G 2.3G 4.9G 32％ /
/dev/sda1 ext3 99M 9.3M 85M 10％ /boot
none tmpfs 62M 0 62M 0％ /dev/shm
parted
倒是有点复杂了，因为它的功能很强，redhat 9中的parted不支持-p参数，但是用parted命令进入后可以用p命令显示出当前的磁盘分区和文件系统情况：
# parted
GNU Parted 1.6.3
Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This program is free software, covered by the GNU General Public License.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Using /dev/sda
Information: The operating system thinks the geometry on /dev/sda is 1044/255/63. Therefore,
cylinder 1024 ends at 8032.499M.
(parted) p
Disk geometry for /dev/sda: 0.000-8192.000 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 101.975 primary ext3 boot
2 101.975 7938.369 primary ext3
3 7938.369 8189.384 primary linux-swap
==============================================================
ubuntu下使用parted：
root@bai-desktop:/home/bai# parted
GNU Parted 1.7.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) help
check NUMBER do a simple check on the file system
cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition
help [COMMAND] prints general help, or help on COMMAND
mklabel LABEL-TYPE create a new disklabel (partition table)
mkfs NUMBER FS-TYPE make a FS-TYPE file system on partititon NUMBER
mkpart PART-TYPE [FS-TYPE] START END make a partition
mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system
move NUMBER START END move partition NUMBER
name NUMBER NAME name partition NUMBER as NAME
print [free|NUMBER|all] display the partition table, a partition, or all devices
quit exit program
rescue START END rescue a lost partition near START and END
resize NUMBER START END resize partition NUMBER and its file system
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER
unit UNIT set the default unit to UNIT
version displays the current version of GNU Parted and copyright information
(parted) print
Disk /dev/sda: 12.9GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 12.3GB 12.3GB primary ext3 boot
2 12.3GB 12.9GB 592MB extended
5 12.3GB 12.9GB 592MB logical linux-swap
(parted) quit
Information: Don't forget to update /etc/fstab, if necessary.
df -Th
parted
----------------------------------------详解-------------------------------------
fdisk -l 命令查看一下
# fdisk -l
Disk /dev/sda: 12.8 GB, 12884901888 bytes
255 heads, 63 sectors/track, 1566 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0003bbd5
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1494 12000523+ 83 Linux
/dev/sda2 1495 1566 578340 5 Extended
/dev/sda5 1495 1566 578308+ 82 Linux swap / Solaris
查看硬盘是什么分区，使用fdisk -l，但是看不到文件系统类型，只能看到分区类型，以Redhat 9为例：
[root@redhat9 root]# fdisk -l
Disk /dev/sda: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 1012 8024467+ 83 Linux
/dev/sda3 1013 1044 257040 82 Linux swap
df -Th 命令
友好一些，容量大小是以易读的方式显示的，而且它是显示所有分区，并不是一个分区。这个命令最方便。
[root@redhat9 root]# df -Th
Filesystem Type Size Used Avail Use％ Mounted on
/dev/sda2 ext3 7.6G 2.3G 4.9G 32％ /
/dev/sda1 ext3 99M 9.3M 85M 10％ /boot
none tmpfs 62M 0 62M 0％ /dev/shm
parted
倒是有点复杂了，因为它的功能很强，redhat 9中的parted不支持-p参数，但是用parted命令进入后可以用p命令显示出当前的磁盘分区和文件系统情况：
# parted
GNU Parted 1.6.3
Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This program is free software, covered by the GNU General Public License.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Using /dev/sda
Information: The operating system thinks the geometry on /dev/sda is 1044/255/63. Therefore,
cylinder 1024 ends at 8032.499M.
(parted) p
Disk geometry for /dev/sda: 0.000-8192.000 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 101.975 primary ext3 boot
2 101.975 7938.369 primary ext3
3 7938.369 8189.384 primary linux-swap
==============================================================
ubuntu下使用parted：
root@bai-desktop:/home/bai# parted
GNU Parted 1.7.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) help
check NUMBER do a simple check on the file system
cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition
help [COMMAND] prints general help, or help on COMMAND
mklabel LABEL-TYPE create a new disklabel (partition table)
mkfs NUMBER FS-TYPE make a FS-TYPE file system on partititon NUMBER
mkpart PART-TYPE [FS-TYPE] START END make a partition
mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system
move NUMBER START END move partition NUMBER
name NUMBER NAME name partition NUMBER as NAME
print [free|NUMBER|all] display the partition table, a partition, or all devices
quit exit program
rescue START END rescue a lost partition near START and END
resize NUMBER START END resize partition NUMBER and its file system
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER
unit UNIT set the default unit to UNIT
version displays the current version of GNU Parted and copyright information
(parted) print
Disk /dev/sda: 12.9GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 12.3GB 12.3GB primary ext3 boot
2 12.3GB 12.9GB 592MB extended
5 12.3GB 12.9GB 592MB logical linux-swap
(parted) quit
Information: Don't forget to update /etc/fstab, if necessary.