把SDL图形库移植到开发板上的操作步骤(开发板的型号为：6410)
把SDL开源图形库移植到开发板上
1.我是先把SDL的四个压缩包拷贝到/usr/jing，你可以鼠标右键解压，也可以使用命令解压,我是只解压了SDL-1.2.14 t ar。
2.打开终端 键入cd /usr/jing/SDL-1.2.14 ,输入./configure --prefix=/usr/jing/ --disable-video-nanox -disable-video-qtopia --disable-video-photon --disable-video-ggi --disable-video-svga --disable-video-aalib --disable-video-dummy --disable-video-dga --disable-arts --disable-esd --disable-alsa --disable-video-x11 --disable-nasm --enable-joystick --enable-input-tslib --enable-video-fbcon --host=arm-linux --build=i386 配置环境变量， 有输入make 命令。最后又输入 make install . -I与-L指定了头文件以及库文件的路径， -l 指定了库名。
3.打开计算机—>打开文件系统在etc中找到exptors在里面写入/usr/jing 192.168.1.199(rw,sync)并保存。
打开终端 输入ifconfig 来查看ＰＣ机的ＩＰ，在命令行输入 [root@localhost ~]# ping 192.168.1.123
PING 192.168.1.123 (192.168.1.123) 56(84) bytes of data.
64 bytes from 192.168.1.123: icmp_seq=1 ttl=64 time=0.073 ms
64 bytes from 192.168.1.123: icmp_seq=2 ttl=64 time=0.070 ms
[1]+ Stopped ping 192.168.1.123
[root@localhost ~]# ping 192.168.1.199
PING 192.168.1.199 (192.168.1.199) 56(84) bytes of data.
64 bytes from 192.168.1.199: icmp_seq=1 ttl=64 time=1.23 ms
64 bytes from 192.168.1.199: icmp_seq=2 ttl=64 time=0.298 ms
64 bytes from 192.168.1.199: icmp_seq=3 ttl=64 time=0.282 ms
[2]+ Stopped ping 192.168.1.199
来查看开发板和PC机是否处于同一频段。
4.输入 service nfs start查看服务器是否启动,若没启动输入
则输入 service nfs restart 之后会出现如下：
[root@localhost ~]# service nfs restart
关闭 NFS mountd： [确定]
关闭 NFS 守护进程： [确定]
关闭 NFS quotas： [确定]
关闭 NFS 服务： [确定]
启动 NFS 服务： exportfs: Warning: /root/liu does not exist
[确定]
关掉 NFS 配额： [确定]
启动 NFS 守护进程： [确定]
启动 NFS mountd： [确定]
如果启动就不用重新启动了。
5.打开开发板 输入minicom -s,选择exit，
[root@localhost ~]# minicom -s
Welcome to minicom 2.2
OPTIONS: I18n
Compiled on Sep 25 2007, 06:13:56.
Port /dev/ttyS0
Press CTRL-A Z for help on special keys
[root@UP_6410 yaffs]# AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
-bash: AT: command not found
445
-bash: c1: command not found
[root@UP_6410 yaffs]# cd ..
[root@UP_6410 mnt]# ls
ide nfs sdcard udisk yaffs
[root@UP_6410 mnt]# mountnfs 192.168.1.123:/usr/dong /mnt/nfs/ 进行挂载。
[root@UP_6410 mnt]# ls
ide nfs sdcard udisk yaffs
[root@UP_6410 mnt]# cd nfs
[root@UP_6410 nfs]# ls
SDL-1.2.14 bin include lib share
6.打开终端输入 cd/usr/jing/SDL-1.2.14/test ，再用
[root@localhost ~]# cd /usr/dong/SDL-1.2.14
[root@localhost SDL-1.2.14]# cd test
[root@localhost test]# ls
12 icon.bmp testbitmap.c testjoystick.c testver.c
13 loopwave.c testblitspeed.c testkeys.c testvidinfo.c
acinclude.m4 Makefile.in testcdrom.c testloadso.c testwin.c
aclocal.m4 mm testcursor.c testlock.c testwm.c
autogen.sh moose.dat testdyngl.c testoverlay2.c threadwin.c
checkkeys.c picture.xbm testerror.c testoverlay.c torturethread.c
configure README testfile.c testpalette.c utf8.txt
configure.in sail.bmp testgamma.c testplatform.c
COPYING sample.bmp testgl.c testsem.c
gcc-fat.sh sample.wav testhread.c testsprite.c
graywin.c testalpha.c testiconv.c testtimer.c
[root@localhost test]# arm-linux-gcc testwin.c -o 16 -I /usr/dong/include/SDL -L/usr/dong/lib -l SDL 进行arm-linux-gcc 编译。
[root@localhost test]# 代表在另一个arm-linux-gcc 编译器中通过了编译。
7.然后在开发板上输入如下：
[root@UP_6410 nfs]# cd SDL-1.2.14
[root@UP_6410 SDL-1.2.14]# ls
BUGS README.OS2 Xcode.tar.gz
Borland.html README.PS3 acinclude
Borland.zip README.PicoGUI autogen.sh
COPYING README.Porting build
CREDITS README.QNX build-deps
CWprojects.sea.bin README.Qtopia build-scripts
INSTALL README.RISCOS config.log
MPWmake.sea.bin README.SVN config.status
Makefile README.Symbian configure
Makefile.dc README.Watcom configure.in
Makefile.in README.WinCE docs
Makefile.minimal README.wscons docs.html
README SDL.qpg include
README-SDL.txt SDL.qpg.in libtool
README.AmigaOS SDL.spec sdl-config
README.BeOS SDL.spec.in sdl-config.in
README.CVS TODO sdl.m4
README.DC VisualC.html sdl.pc
README.MacOS VisualC.zip sdl.pc.in
README.MacOSX VisualCE.zip src
README.MiNT Watcom-OS2.zip symbian.zip
README.NDS Watcom-Win32.zip test
README.NanoX WhatsNew
[root@UP_6410 SDL-1.2.14]# cd test
[root@UP_6410 test]# ls
12 graywin.c testcursor.c testoverlay2.c
13 icon.bmp testdyngl.c testpalette.c
16 loopwave.c testerror.c testplatform.c
COPYING mm testfile.c testsem.c
Makefile.in moose.dat testgamma.c testsprite.c
README picture.xbm testgl.c testtimer.c
acinclude.m4 sail.bmp testhread.c testver.c
aclocal.m4 sample.bmp testiconv.c testvidinfo.c
autogen.sh sample.wav testjoystick.c testwin.c
checkkeys.c testalpha.c testkeys.c testwm.c
configure testbitmap.c testloadso.c threadwin.c
configure.in testblitspeed.c testlock.c torturethread.c
gcc-fat.sh testcdrom.c testoverlay.c utf8.txt
[root@UP_6410 test]# ./16 在开发板上运行。
Set 640x480x16 mode
(video surface located in system memory)
Loading picture: sample.bmp
testwin: setting colors
(image surface located in system memory)
testwin: moving image
testwin: fading out...
testwin: fading in...
testwin: fading over
Time: 892 milliseconds
[root@UP_6410 test]#
8.最后会在开发板上显示所运行的结果：