VMware安装solaris 10 后找不到网卡的解决方法

安装solaris 10后如果用ifconfig -a只能看到一个lo0的话说明只有一个环回卡，说明网卡没有启动或者系统认不出来，如果是默认没有启动且你得网卡名称像我一样已经为e1000了，那只要执行Ifconfig e1000g0 plumb   ifconfig e1000g0 dhcp   该步骤就能启动网卡，其它情况可以按照下面步骤自己进行启动。

you will probably get the error failed to plumb pcn0
If so follow these steps, if not, and everything magically works..cool

AFTER INSTALL
――――――�C
for networking.
――――――�C
shutdown the VM

edit the .VMX file in the virtual machine folder on the host OS and add the following line
ethernet0.virtualDev = “e1000″

then startup Solaris

―――――――――――――――�C
then

Go to a console window and type the following

Ifconfig e1000g0 plumb
ifconfig e1000g0 dhcp

ifconfig -a is the equivalent of ipconfig /all

―――――――――――――――�C
下面的步骤可以按自己的实际情况来做

then type

touch /etc/dhcp.e1000g0
touch /etc/hostname.e1000g0

rm /etc/dhcp.pcn0
rm /etc/hostname.pcn0

then edit /etc/inet/hosts

add the following

127.0.0.1 localhost.localdomain localhost loghost
remove any other entries

―――――――――――――――-
then

rename /etc/nsswitch.conf to nsswitch.old
rename /etc/nsswitch.dns to nsswitch.conf

reboot (logout doesn’t switch the nameserver settings, have to reboot)