mysql_spec rpmbuild

# Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to the
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston
# MA  02110-1301  USA.

##############################################################################
# Some common macro definitions
##############################################################################

# NOTE: "vendor" is used in upgrade/downgrade check, so you can't
# change these, has to be exactly as is.
%define mysql_old_vendor    MySQL AB               #vendor 供应商
%define mysql_vendor_2        Sun Microsystems, Inc.
%define mysql_vendor        Oracle and/or its affiliates

%define mysql_version 5.1.60                  #定义版本  后面需要查找 mysql.ysql_version.tat.gz

%define mysqld_user    mysql
%define mysqld_group   mysql
%define mysqldatadir   /var/lib/mysql          #数据库存储位置
%define see_base For a description of MySQL see the base MySQL RPM or http://www.mysql.com

# ------------------------------------------------------------------------------
# On SuSE 9 no separate "debuginfo" package is built. To enable basic
# debugging on that platform, we don't strip binaries on SuSE 9. We
# disable the strip of binaries by redefining the RPM macro
# "__os_install_post" leaving out the script calls that normally does
# this. We do this in all cases, as on platforms where "debuginfo" is
# created, a script "find-debuginfo.sh" will be called that will do
# the strip anyway, part of separating the executable and debug
# information into separate files put into separate packages.
#
# Some references (shows more advanced conditional usage):
# http://www.redhat.com/archives/rpm-list/2001-November/msg00257.html
# http://www.redhat.com/archives/rpm-list/2003-February/msg00275.html
# http://www.redhat.com/archives/rhl-devel-list/2004-January/msg01546.html
# http://lists.opensuse.org/archive/opensuse-commit/2006-May/1171.html
# ------------------------------------------------------------------------------
%define __os_install_post /usr/lib/rpm/brp-compress   #调试

# ------------------------------------------------------------------------------
# We don't package all files installed into the build root by intention -      #没有把所有的文件打包
# See BUG#998 for details.
# ------------------------------------------------------------------------------
%define _unpackaged_files_terminate_build 0

# ------------------------------------------------------------------------------
# RPM build tools now automatically detects Perl module dependencies.   #自动检测perl模块依赖关系
# This detection gives problems as it is broken in some versions, and it also  #这种检测  
# give unwanted dependencies from mandatory scripts in our package.     #强制脚本
# Might not be possible to disable in all RPM tool versions, but here we    
# try. We keep the "AutoReqProv: no" for the "test" sub package, as disabling   
# here might fail, and that package has the most problems.  #可能会失败
# See http://fedoraproject.org/wiki/Packaging/Perl#Filtering_Requires:_and_Provides
#     http://www.wideopen.com/archives/rpm-list/2002-October/msg00343.html
# ------------------------------------------------------------------------------
%undefine __perl_provides             
%undefine __perl_requires

##############################################################################
# Command line handling   #命令行处理
##############################################################################

# ----------------------------------------------------------------------
# use "rpmbuild --with yassl" or "rpm --define '_with_yassl 1'" (for RPM 3.x)
# to build with yaSSL support (off by default)
# ----------------------------------------------------------------------
%{?_with_yassl:%define YASSL_BUILD 1}
%{!?_with_yassl:%define YASSL_BUILD 0}

# ----------------------------------------------------------------------
# use "rpmbuild --without bundled_zlib" or "rpm --define '_without_bundled_zlib 1'"
# (for RPM 3.x) to not build using the bundled zlib (on by default)
# ----------------------------------------------------------------------
%{!?_with_bundled_zlib: %{!?_without_bundled_zlib: %define WITH_BUNDLED_ZLIB 1}}
%{?_with_bundled_zlib:%define WITH_BUNDLED_ZLIB 1}
%{?_without_bundled_zlib:%define WITH_BUNDLED_ZLIB 0}

# ----------------------------------------------------------------------
# use "rpmbuild --without innodb_plugin" or "rpm --define '_without_innodb_plugin 1'"
# (for RPM 3.x) to not build the innodb plugin (on by default with innodb builds)
# ----------------------------------------------------------------------
%{!?_with_innodb_plugin: %{!?_without_innodb_plugin: %define WITH_INNODB_PLUGIN 1}}
%{?_with_innodb_plugin:%define WITH_INNODB_PLUGIN 1}
%{?_without_innodb_plugin:%define WITH_INNODB_PLUGIN 0}

# ----------------------------------------------------------------------
# use "rpmbuild --with cluster" or "rpm --define '_with_cluster 1'" (for RPM 3.x)
# to build with cluster support (off by default)
# ----------------------------------------------------------------------
%{?_with_cluster:%define CLUSTER_BUILD 1}
%{!?_with_cluster:%define CLUSTER_BUILD 0}

##############################################################################
# Product definitions - set for a "community" package   #产品定义   一个社区的包
##############################################################################

%define server_suffix  -community
%define package_suffix -community
%define ndbug_comment MySQL Community Server (GPL)
%define debug_comment MySQL Community Server - Debug (GPL)
%define commercial 0
%define EMBEDDED_BUILD 1
%define PARTITION_BUILD 1
# Default for CLUSTER_BUILD is "0", but command line option may override it
%define COMMUNITY_BUILD 1
%define INNODB_BUILD 1
%define NORMAL_TEST_MODE test-bt
%define DEBUG_TEST_MODE test-bt-debug

%define release 1.glibc23

%define mysql_license GPL
%define src_dir mysql-%{mysql_version}

##############################################################################
# Main spec file section   #主要spec文件标签
##############################################################################

Name:        MySQL-eol
Summary:    MySQL: a very fast and reliable SQL database server
Group:        Applications/Databases
Version:    @MYSQL_U_SCORE_VERSION@
Release:    %{release}
License:    Copyright (c) 2000, @MYSQL_COPYRIGHT_YEAR@, %{mysql_vendor}. All rights reserved. Under %{mysql_license} license as shown in the Description field.
Source:        http://www.mysql.com/Downloads/MySQL-@MYSQL_BASE_VERSION@/%{src_dir}.tar.gz
URL:        http://www.mysql.com/
Packager:    %{mysql_vendor} Product Engineering Team <[email protected]>
Vendor:        %{mysql_vendor}
Provides:    msqlormysql MySQL-server mysql
BuildRequires: ncurses-devel
Obsoletes:    mysql

# Think about what you use here since the first step is to
# run a rm -rf
BuildRoot:    %{_tmppath}/%{name}-%{version}-build

# From the manual
%description
The MySQL(TM) software delivers a very fast, multi-threaded, multi-user,
and robust SQL (Structured Query Language) database server. MySQL Server
is intended for mission-critical, heavy-load production systems as well
as for embedding into mass-deployed software. MySQL is a trademark of
%{mysql_vendor}

Copyright (c) 2000, @MYSQL_COPYRIGHT_YEAR@, %{mysql_vendor}. All rights reserved.

This software comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to modify and redistribute it under the GPL license.

The MySQL web site (http://www.mysql.com/) provides the latest
news and information about the MySQL software. Also please see the
documentation and the manual for more information.

##############################################################################
# Sub package definition   #子包定义
##############################################################################

%package server    #server**
Summary:    MySQL: a very fast and reliable SQL database server
Group:        Applications/Databases
Requires:    coreutils grep procps /usr/sbin/useradd /usr/sbin/groupadd /sbin/chkconfig
Provides:    msqlormysql mysql MySQL mysql-server MySQL-server
Obsoletes:    mysql MySQL mysql-server MySQL-server
Obsoletes:    MySQL-server-classic MySQL-server-community MySQL-server-enterprise
Obsoletes:    MySQL-server-advanced MySQL-server-advanced-gpl MySQL-server-enterprise-gpl

%description server
The MySQL(TM) software delivers a very fast, multi-threaded, multi-user,
and robust SQL (Structured Query Language) database server. MySQL Server
is intended for mission-critical, heavy-load production systems as well
as for embedding into mass-deployed software. MySQL is a trademark of
%{mysql_vendor}

Copyright (c) 2000, @MYSQL_COPYRIGHT_YEAR@, %{mysql_vendor}. All rights reserved.

This software comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to modify and redistribute it under the GPL license.

The MySQL web site (http://www.mysql.com/) provides the latest
news and information about the MySQL software. Also please see the
documentation and the manual for more information.

This package includes the MySQL server binary
%if %{INNODB_BUILD}
(configured including InnoDB)
%endif
as well as related utilities to run and administer a MySQL server.

If you want to access and work with the database, you have to install
package "MySQL-client" as well!

# ------------------------------------------------------------------------------

%package client            #client **
Summary:    MySQL - Client
Group:        Applications/Databases
Provides:    mysql-client MySQL-client
Obsoletes:    mysql-client MySQL-client
Obsoletes:    MySQL-client-classic MySQL-client-community MySQL-client-enterprise
Obsoletes:    MySQL-client-advanced MySQL-client-advanced-gpl MySQL-client-enterprise-gpl

%description client
This package contains the standard MySQL clients and administration tools.

%{see_base}

# ------------------------------------------------------------------------------

%if %{CLUSTER_BUILD}
%package ndb-storage             #cluster **
Summary:    MySQL - ndbcluster storage engine
Group:        Applications/Databases

%description ndb-storage
This package contains the ndbcluster storage engine.
It is necessary to have this package installed on all
computers that should store ndbcluster table data.

%{see_base}

# ------------------------------------------------------------------------------

%package ndb-management          #cluster management
Summary:    MySQL - ndbcluster storage engine management
Group:        Applications/Databases

%description ndb-management
This package contains ndbcluster storage engine management.
It is necessary to have this package installed on at least
one computer in the cluster.

%{see_base}

# ------------------------------------------------------------------------------

%package ndb-tools     #tools**
Summary:    MySQL - ndbcluster storage engine basic tools
Group:        Applications/Databases

%description ndb-tools
This package contains ndbcluster storage engine basic tools.

%{see_base}

# ------------------------------------------------------------------------------

%package ndb-extra     #extra
Summary:    MySQL - ndbcluster storage engine extra tools
Group:        Applications/Databases

%description ndb-extra
This package contains some extra ndbcluster storage engine tools for the advanced user.
They should be used with caution.

%{see_base}
%endif

# ------------------------------------------------------------------------------

%package test              #test **
Summary:    MySQL - Test suite
Group:        Applications/Databases
Requires:    %{name}-client perl
Provides:    mysql-test MySQL-test
Obsoletes:    mysql-test MySQL-test
Obsoletes:    mysql-bench MySQL-bench
Obsoletes:    MySQL-test-classic MySQL-test-community MySQL-test-enterprise
Obsoletes:    MySQL-test-advanced MySQL-test-advanced-gpl MySQL-test-enterprise-gpl
AutoReqProv: no

%description test
This package contains the MySQL regression test suite.

%{see_base}

# ------------------------------------------------------------------------------

%package devel      #devel
Summary:    MySQL - Development header files and libraries
Group:        Applications/Databases
Provides:    mysql-devel MySQL-devel
Obsoletes:    mysql-devel MySQL-devel
Obsoletes:    MySQL-devel-classic MySQL-devel-community MySQL-devel-enterprise
Obsoletes:    MySQL-devel-advanced MySQL-devel-advanced-gpl MySQL-devel-enterprise-gpl

%description devel
This package contains the development header files and libraries
necessary to develop MySQL client applications.

%{see_base}

# ------------------------------------------------------------------------------

%package shared               #shared **
Summary:    MySQL - Shared libraries
Group:        Applications/Databases
Provides:    mysql-shared MySQL-shared
Obsoletes:    mysql-shared MySQL-shared-standard MySQL-shared-pro
Obsoletes:    MySQL-shared-pro-cert MySQL-shared-pro-gpl
Obsoletes:    MySQL-shared-pro-gpl-cert MySQL-shared
Obsoletes:    MySQL-shared-classic MySQL-shared-community MySQL-shared-enterprise
Obsoletes:    MySQL-shared-advanced MySQL-shared-advanced-gpl MySQL-shared-enterprise-gpl

%description shared
This package contains the shared libraries (*.so*) which certain
languages and applications need to dynamically load and use MySQL.

# ------------------------------------------------------------------------------

%if %{EMBEDDED_BUILD}

%package embedded         #嵌入式
Summary:    MySQL - Embedded library
Group:        Applications/Databases
Requires:    %{name}-devel
Provides:    mysql-embedded MySQL-embedded
Obsoletes:    mysql-embedded MySQL-embedded
Obsoletes:    MySQL-embedded-pro
Obsoletes:    MySQL-embedded-classic MySQL-embedded-community MySQL-embedded-enterprise
Obsoletes:    MySQL-embedded-advanced MySQL-embedded-advanced-gpl MySQL-embedded-enterprise-gpl

%description embedded
This package contains the MySQL server as an embedded library.

The embedded MySQL server library makes it possible to run a
full-featured MySQL server inside the client application.
The main benefits are increased speed and more simple management
for embedded applications.

The API is identical for the embedded MySQL version and the
client/server version.

%{see_base}

%endif

##############################################################################
#
##############################################################################

%prep
# We unpack the source two times, for 'debug' and 'release' build.
%setup -T -a 0 -c -n mysql-%{mysql_version}
mv mysql-%{mysql_version} mysql-debug-%{mysql_version}
%setup -D -T -a 0 -n mysql-%{mysql_version}
mv mysql-%{mysql_version} mysql-release-%{mysql_version}

##############################################################################
# The actual build  #实际构建
##############################################################################

%build

BuildMySQL() {
# Let "MYSQL_BUILD_*FLAGS" take precedence.
CFLAGS=${MYSQL_BUILD_CFLAGS:-$CFLAGS}
CXXFLAGS=${MYSQL_BUILD_CXXFLAGS:-$CXXFLAGS}
LDFLAGS=${MYSQL_BUILD_LDFLAGS:-$LDFLAGS}
# Fall back on RPM_OPT_FLAGS (part of RPM environment) if no flags are given.
CFLAGS=${CFLAGS:-$RPM_OPT_FLAGS}
CXXFLAGS=${CXXFLAGS:-$RPM_OPT_FLAGS -felide-constructors -fno-exceptions -fno-rtti }
# Evaluate current setting of $DEBUGF
if [ $DEBUG -gt 0 ] ; then
    OPT_COMMENT='--with-comment="%{debug_comment}"'
    OPT_DEBUG='--with-debug'
    CFLAGS=`echo   " $CFLAGS "   | \
        sed -e 's/ -O[0-9]* / /' -e 's/ -unroll2 / /' -e 's/ -ip / /' \
            -e 's/^ //' -e 's/ $//'`
    CXXFLAGS=`echo " $CXXFLAGS " | \
        sed -e 's/ -O[0-9]* / /' -e 's/ -unroll2 / /' -e 's/ -ip / /' \
            -e 's/^ //' -e 's/ $//'`
else
    OPT_COMMENT='--with-comment="%{ndbug_comment}"'
    OPT_DEBUG=''
fi
# The --enable-assembler simply does nothing on systems that does not
# support assembler speedups.
sh -c  "PATH=\"${MYSQL_BUILD_PATH:-$PATH}\" \
    CC=\"${MYSQL_BUILD_CC:-$CC}\" \
    CXX=\"${MYSQL_BUILD_CXX:-$CXX}\" \
    CFLAGS=\"$CFLAGS\" \
    CXXFLAGS=\"$CXXFLAGS\" \
    LDFLAGS=\"$LDFLAGS\" \
    ./configure \
         $* \
        --with-mysqld-ldflags='-static' \
        --with-client-ldflags='-static' \
        --enable-assembler \
        --enable-local-infile \
        --with-fast-mutexes \
        --with-mysqld-user=%{mysqld_user} \
        --with-unix-socket-path=%{mysqldatadir}/mysql.sock \
        --with-pic \
        --prefix=/ \
%if %{CLUSTER_BUILD}
        --with-extra-charsets=all \
%else
        --with-extra-charsets=complex \
%endif
%if %{YASSL_BUILD}
        --with-ssl \
%else
        --without-ssl \
%endif
        --exec-prefix=%{_exec_prefix} \
        --libexecdir=%{_sbindir} \
        --libdir=%{_libdir} \
        --sysconfdir=%{_sysconfdir} \
        --datadir=%{_datadir} \
        --localstatedir=%{mysqldatadir} \
        --infodir=%{_infodir} \
        --includedir=%{_includedir} \
        --mandir=%{_mandir} \
        --enable-thread-safe-client \
        $OPT_COMMENT \
        $OPT_DEBUG \
        --with-readline \
%if %{WITH_BUNDLED_ZLIB}
        --with-zlib-dir=bundled \
%endif
%if %{CLUSTER_BUILD}
        --with-plugin-ndbcluster \
%else
        --without-plugin-ndbcluster \
%endif
%if %{INNODB_BUILD}
        --with-plugin-innobase \
%if %{WITH_INNODB_PLUGIN}
%else
        --without-plugin-innodb_plugin \
%endif
%else
        --without-plugin-innobase \
        --without-plugin-innodb_plugin \
%endif
%if %{PARTITION_BUILD}
        --with-plugin-partition \
%else
        --without-plugin-partition \
%endif
        --with-plugin-csv \
        --with-plugin-archive \
        --with-plugin-blackhole \
        --with-plugin-federated \
        --without-plugin-daemon_example \
        --without-plugin-ftexample \
%if %{EMBEDDED_BUILD}
        --with-embedded-server \
%else
        --without-embedded-server \
%endif
        --with-big-tables \
        --enable-shared \
        "
 make
}
# end of function definition "BuildMySQL"

# Use our own copy of glibc

OTHER_LIBC_DIR=/usr/local/mysql-glibc
USE_OTHER_LIBC_DIR=""
if test -d "$OTHER_LIBC_DIR"
then
  USE_OTHER_LIBC_DIR="--with-other-libc=$OTHER_LIBC_DIR"
fi

# Use the build root for temporary storage of the shared libraries.

RBR=$RPM_BUILD_ROOT

# Clean up the BuildRoot first
[ "$RBR" != "/" ] && [ -d $RBR ] && rm -rf $RBR;
mkdir -p $RBR%{_libdir}/mysql

#
# Use MYSQL_BUILD_PATH so that we can use a dedicated version of gcc
#
PATH=${MYSQL_BUILD_PATH:-/bin:/usr/bin}
export PATH

# Build the Debug binary.

# Use gcc for C and C++ code (to avoid a dependency on libstdc++ and
# including exceptions into the code
if [ -z "$CXX" -a -z "$CC" ] ; then
    export CC="gcc" CXX="gcc"
fi


##############################################################################
#
#  Build the debug version
#
##############################################################################

(
# We are in a subshell, so we can modify variables just for one run.

# Add -g and --with-debug.
DEBUG=1
cd mysql-debug-%{mysql_version} &&
CFLAGS="$CFLAGS" \
CXXFLAGS="$CXXFLAGS" \
BuildMySQL
)

# We might want to save the config log file
if test -n "$MYSQL_DEBUGCONFLOG_DEST"
then
  cp -fp mysql-debug-%{mysql_version}/config.log "$MYSQL_DEBUGCONFLOG_DEST"
fi

(cd mysql-debug-%{mysql_version} ; make test-bt-debug)

##############################################################################
#
#  Build the release binary
#
##############################################################################

DEBUG=0
(cd mysql-release-%{mysql_version} &&
CFLAGS="$CFLAGS" \
CXXFLAGS="$CXXFLAGS" \
BuildMySQL
)
# We might want to save the config log file
if test -n "$MYSQL_CONFLOG_DEST"
then
  cp -fp  mysql-release-%{mysql_version}/config.log "$MYSQL_CONFLOG_DEST"
fi

(cd mysql-release-%{mysql_version} ; make test-bt)

##############################################################################

# For gcc builds, include libgcc.a in the devel subpackage (BUG 4921)
# Some "icc" calls may have "gcc" in the argument string, so we should first
# check for "icc". (If we don't check, the "--print-libgcc-file" call will fail.)
if expr "$CC" : ".*icc.*" > /dev/null ;
then
    %define WITH_LIBGCC 0
    :
elif expr "$CC" : ".*gcc.*" > /dev/null ;
then
  libgcc=`$CC $CFLAGS --print-libgcc-file`
  if [ -f $libgcc ]
  then
    %define WITH_LIBGCC 1
    install -m 644 $libgcc $RBR%{_libdir}/mysql/libmygcc.a
  else
    %define WITH_LIBGCC 0
    :
  fi
else
    %define WITH_LIBGCC 0
    :
fi

##############################################################################

%install
RBR=$RPM_BUILD_ROOT
MBD=$RPM_BUILD_DIR/mysql-%{mysql_version}/mysql-release-%{mysql_version}

# Ensure that needed directories exists
install -d $RBR%{_sysconfdir}/{logrotate.d,init.d}
install -d $RBR%{mysqldatadir}/mysql
install -d $RBR%{_datadir}/mysql-test
install -d $RBR%{_includedir}
install -d $RBR%{_libdir}
install -d $RBR%{_mandir}
install -d $RBR%{_sbindir}


# Install all binaries
(cd $MBD && make install DESTDIR=$RBR testroot=%{_datadir})
# Old packages put shared libs in %{_libdir}/ (not %{_libdir}/mysql), so do
# the same here.
mv $RBR/%{_libdir}/mysql/*.so* $RBR/%{_libdir}/

# install "mysqld-debug"
$MBD/libtool --mode=execute install -m 755 \
                 $RPM_BUILD_DIR/mysql-%{mysql_version}/mysql-debug-%{mysql_version}/sql/mysqld \
                 $RBR%{_sbindir}/mysqld-debug

# install saved perror binary with NDB support (BUG#13740)
install -m 755 $MBD/extra/perror $RBR%{_bindir}/perror

# Install logrotate and autostart
install -m 644 $MBD/support-files/mysql-log-rotate $RBR%{_sysconfdir}/logrotate.d/mysql
install -m 755 $MBD/support-files/mysql.server $RBR%{_sysconfdir}/init.d/mysql

%if %{EMBEDDED_BUILD}
# Install embedded server library in the build root
install -m 644 $MBD/libmysqld/libmysqld.a $RBR%{_libdir}/mysql/
%endif

# in RPMs, it is unlikely that anybody should use "sql-bench"
rm -fr $RBR%{_datadir}/sql-bench

# Create a symlink "rcmysql", pointing to the init.script. SuSE users
# will appreciate that, as all services usually offer this.
ln -s %{_sysconfdir}/init.d/mysql $RBR%{_sbindir}/rcmysql

# Touch the place where the my.cnf config file and mysqlmanager.passwd
# (MySQL Instance Manager password file) might be located
# Just to make sure it's in the file list and marked as a config file
touch $RBR%{_sysconfdir}/my.cnf
touch $RBR%{_sysconfdir}/mysqlmanager.passwd

##############################################################################
#  Post processing actions, i.e. when installed
##############################################################################

%pre server
# This is the code running at the beginning of a RPM upgrade action,
# before replacing the old files with the new ones.

# There are users who deviate from the default file system layout.
# Check local settings to support them.
if [ -x %{_bindir}/my_print_defaults ]
then
  mysql_datadir=`%{_bindir}/my_print_defaults server mysqld | grep '^--datadir=' | sed -n 's/--datadir=//p'`
  PID_FILE_PATT=`%{_bindir}/my_print_defaults server mysqld | grep '^--pid-file=' | sed -n 's/--pid-file=//p'`
fi
if [ -z "$mysql_datadir" ]
then
  mysql_datadir=%{mysqldatadir}
fi
if [ -z "$PID_FILE_PATT" ]
then
  PID_FILE_PATT="$mysql_datadir/*.pid"
fi

# Check if we can safely upgrade.  An upgrade is only safe if it's from one
# of our RPMs in the same version family.

installed=`rpm -q --whatprovides mysql-server 2> /dev/null`
if [ $? -eq 0 -a -n "$installed" ]; then
  vendor=`rpm -q --queryformat='%{VENDOR}' "$installed" 2>&1`
  version=`rpm -q --queryformat='%{VERSION}' "$installed" 2>&1`
  myoldvendor='%{mysql_old_vendor}'
  myvendor_2='%{mysql_vendor_2}'
  myvendor='%{mysql_vendor}'
  myversion='%{mysql_version}'

  old_family=`echo $version   | sed -n -e 's,^\([1-9][0-9]*\.[0-9][0-9]*\)\..*$,\1,p'`
  new_family=`echo $myversion | sed -n -e 's,^\([1-9][0-9]*\.[0-9][0-9]*\)\..*$,\1,p'`

  [ -z "$vendor" ] && vendor='<unknown>'
  [ -z "$old_family" ] && old_family="<unrecognized version $version>"
  [ -z "$new_family" ] && new_family="<bad package specification: version $myversion>"

  error_text=
  if [ "$vendor" != "$myoldvendor" -a "$vendor" != "$myvendor_2" -a "$vendor" != "$myvendor" ]; then
    error_text="$error_text
The current MySQL server package is provided by a different
vendor ($vendor) than $myoldvendor, $myvendor_2, or $myvendor.
Some files may be installed to different locations, including log
files and the service startup script in %{_sysconfdir}/init.d/.
"
  fi

  if [ "$old_family" != "$new_family" ]; then
    error_text="$error_text
Upgrading directly from MySQL $old_family to MySQL $new_family may not
be safe in all cases.  A manual dump and restore using mysqldump is
recommended.  It is important to review the MySQL manual's Upgrading
section for version-specific incompatibilities.
"
  fi

  if [ -n "$error_text" ]; then
    cat <<HERE >&2

******************************************************************
A MySQL server package ($installed) is installed.
$error_text
A manual upgrade is required.

- Ensure that you have a complete, working backup of your data and my.cnf
  files
- Shut down the MySQL server cleanly
- Remove the existing MySQL packages.  Usually this command will
  list the packages you should remove:
  rpm -qa | grep -i '^mysql-'

  You may choose to use 'rpm --nodeps -ev <package-name>' to remove
  the package which contains the mysqlclient shared library.  The
  library will be reinstalled by the MySQL-shared-compat package.
- Install the new MySQL packages supplied by $myvendor
- Ensure that the MySQL server is started
- Run the 'mysql_upgrade' program

This is a brief description of the upgrade process.  Important details
can be found in the MySQL manual, in the Upgrading section.
******************************************************************
HERE
    exit 1
  fi
fi

# We assume that if there is exactly one ".pid" file,
# it contains the valid PID of a running MySQL server.
NR_PID_FILES=`ls $PID_FILE_PATT 2>/dev/null | wc -l`
case $NR_PID_FILES in
    0 ) SERVER_TO_START=''  ;;  # No "*.pid" file == no running server
    1 ) SERVER_TO_START='true' ;;
    * ) SERVER_TO_START=''      # Situation not clear
        SEVERAL_PID_FILES=true ;;
esac
# That logic may be debated: We might check whether it is non-empty,
# contains exactly one number (possibly a PID), and whether "ps" finds it.
# OTOH, if there is no such process, it means a crash without a cleanup -
# is that a reason not to start a new server after upgrade?

STATUS_FILE=$mysql_datadir/RPM_UPGRADE_MARKER

if [ -f $STATUS_FILE ]; then
    echo "Some previous upgrade was not finished:"
    ls -ld $STATUS_FILE
    echo "Please check its status, then do"
    echo "    rm $STATUS_FILE"
    echo "before repeating the MySQL upgrade."
    exit 1
elif [ -n "$SEVERAL_PID_FILES" ] ; then
    echo "You have more than one PID file:"
    ls -ld $PID_FILE_PATT
    echo "Please check which one (if any) corresponds to a running server"
    echo "and delete all others before repeating the MySQL upgrade."
    exit 1
fi

NEW_VERSION=%{mysql_version}-%{release}

# The "pre" section code is also run on a first installation,
# when there  is no data directory yet. Protect against error messages.
if [ -d $mysql_datadir ] ; then
    echo "MySQL RPM upgrade to version $NEW_VERSION"  > $STATUS_FILE
    echo "'pre' step running at `date`"          >> $STATUS_FILE
    echo                                         >> $STATUS_FILE
    echo "ERR file(s):"                          >> $STATUS_FILE
    ls -ltr $mysql_datadir/*.err                 >> $STATUS_FILE
    echo                                         >> $STATUS_FILE
    echo "Latest 'Version' line in latest file:" >> $STATUS_FILE
    grep '^Version' `ls -tr $mysql_datadir/*.err | tail -1` | \
        tail -1                              >> $STATUS_FILE
    echo                                         >> $STATUS_FILE

    if [ -n "$SERVER_TO_START" ] ; then
        # There is only one PID file, race possibility ignored
        echo "PID file:"                           >> $STATUS_FILE
        ls -l   $PID_FILE_PATT                     >> $STATUS_FILE
        cat     $PID_FILE_PATT                     >> $STATUS_FILE
        echo                                       >> $STATUS_FILE
        echo "Server process:"                     >> $STATUS_FILE
        ps -fp `cat $PID_FILE_PATT`                >> $STATUS_FILE
        echo                                       >> $STATUS_FILE
        echo "SERVER_TO_START=$SERVER_TO_START"    >> $STATUS_FILE
    else
        # Take a note we checked it ...
        echo "PID file:"                           >> $STATUS_FILE
        ls -l   $PID_FILE_PATT                     >> $STATUS_FILE 2>&1
    fi
fi

# Shut down a previously installed server first
# Note we *could* make that depend on $SERVER_TO_START, but we rather don't,
# so a "stop" is attempted even if there is no PID file.
# (Maybe the "stop" doesn't work then, but we might fix that in itself.)
if [ -x %{_sysconfdir}/init.d/mysql ] ; then
    %{_sysconfdir}/init.d/mysql stop > /dev/null 2>&1
    echo "Giving mysqld 5 seconds to exit nicely"
    sleep 5
fi

%post server
# This is the code running at the end of a RPM install or upgrade action,
# after the (new) files have been written.

# There are users who deviate from the default file system layout.
# Check local settings to support them.
if [ -x %{_bindir}/my_print_defaults ]
then
  mysql_datadir=`%{_bindir}/my_print_defaults server mysqld | grep '^--datadir=' | sed -n 's/--datadir=//p'`
fi
if [ -z "$mysql_datadir" ]
then
  mysql_datadir=%{mysqldatadir}
fi

NEW_VERSION=%{mysql_version}-%{release}
STATUS_FILE=$mysql_datadir/RPM_UPGRADE_MARKER

# ----------------------------------------------------------------------
# Create data directory if needed, check whether upgrade or install
# ----------------------------------------------------------------------
if [ ! -d $mysql_datadir ] ; then mkdir -m 755 $mysql_datadir; fi
if [ -f $STATUS_FILE ] ; then
    SERVER_TO_START=`grep '^SERVER_TO_START=' $STATUS_FILE | cut -c17-`
else
    SERVER_TO_START='true'   # This is for 5.1 only, to not change behavior
fi
# echo "Analyzed: SERVER_TO_START=$SERVER_TO_START"
if [ ! -d $mysql_datadir/mysql ] ; then
    mkdir $mysql_datadir/mysql $mysql_datadir/test
    echo "MySQL RPM installation of version $NEW_VERSION" >> $STATUS_FILE
else
    # If the directory exists, we may assume it is an upgrade.
    echo "MySQL RPM upgrade to version $NEW_VERSION" >> $STATUS_FILE
fi

# ----------------------------------------------------------------------
# Make MySQL start/shutdown automatically when the machine does it.
# ----------------------------------------------------------------------
# NOTE: This still needs to be debated. Should we check whether these links
# for the other run levels exist(ed) before the upgrade?
# use insserv for older SuSE Linux versions
if [ -x /sbin/insserv ] ; then
    /sbin/insserv %{_sysconfdir}/init.d/mysql
# use chkconfig on Red Hat and newer SuSE releases
elif [ -x /sbin/chkconfig ] ; then
    /sbin/chkconfig --add mysql
fi

# ----------------------------------------------------------------------
# Create a MySQL user and group. Do not report any problems if it already
# exists.
# ----------------------------------------------------------------------
groupadd -r %{mysqld_group} 2> /dev/null || true
useradd -M -r -d $mysql_datadir -s /bin/bash -c "MySQL server" -g %{mysqld_group} %{mysqld_user} 2> /dev/null || true
# The user may already exist, make sure it has the proper group nevertheless (BUG#12823)
usermod -g %{mysqld_group} %{mysqld_user} 2> /dev/null || true

# ----------------------------------------------------------------------
# Change permissions so that the user that will run the MySQL daemon
# owns all database files.
# ----------------------------------------------------------------------
chown -R %{mysqld_user}:%{mysqld_group} $mysql_datadir

# ----------------------------------------------------------------------
# Initiate databases if needed
# ----------------------------------------------------------------------
if ! grep '^MySQL RPM upgrade' $STATUS_FILE >/dev/null 2>&1 ; then
    # Fix bug#45415: no "mysql_install_db" on an upgrade
    # Do this as a negative to err towards more "install" runs
    # rather than to miss one.
    %{_bindir}/mysql_install_db --rpm --user=%{mysqld_user}
fi

# ----------------------------------------------------------------------
# Upgrade databases if needed would go here - but it cannot be automated yet
# ----------------------------------------------------------------------

# ----------------------------------------------------------------------
# Change permissions again to fix any new files.
# ----------------------------------------------------------------------
chown -R %{mysqld_user}:%{mysqld_group} $mysql_datadir

# ----------------------------------------------------------------------
# Fix permissions for the permission database so that only the user
# can read them.
# ----------------------------------------------------------------------
chmod -R og-rw $mysql_datadir/mysql

# ----------------------------------------------------------------------
# Deal with SELinux, if it is installed / used
# ----------------------------------------------------------------------
if [ -x /sbin/restorecon ] ; then
    /sbin/restorecon -R %{mysqldatadir}
fi

# Was the server running before the upgrade? If so, restart the new one.
if [ "$SERVER_TO_START" = "true" ] ; then
    # Restart in the same way that mysqld will be started normally.
    %{_sysconfdir}/init.d/mysql start

    # Allow mysqld_safe to start mysqld and print a message before we exit
    sleep 2
fi

#echo "Thank you for installing the MySQL Community Server! For Production
#systems, we recommend MySQL Enterprise, which contains enterprise-ready
#software, intelligent advisory services, and full production support with
#scheduled service packs and more.  Visit www.mysql.com/enterprise for more
#information."

# Collect an upgrade history ...
echo "Upgrade/install finished at `date`"        >> $STATUS_FILE
echo                                             >> $STATUS_FILE
echo "====="                                     >> $STATUS_FILE
STATUS_HISTORY=$mysql_datadir/RPM_UPGRADE_HISTORY
cat $STATUS_FILE >> $STATUS_HISTORY
rm  $STATUS_FILE
 
%if %{CLUSTER_BUILD}
%post ndb-storage
mysql_clusterdir=/var/lib/mysql-cluster

# Create cluster directory if needed
if test ! -d $mysql_clusterdir; then mkdir -m 755 $mysql_clusterdir; fi
%endif

%preun server
if [ $1 = 0 ] ; then
    # Stop MySQL before uninstalling it
    if [ -x %{_sysconfdir}/init.d/mysql ] ; then
        %{_sysconfdir}/init.d/mysql stop > /dev/null
        # Remove autostart of MySQL
        # For older SuSE Linux versions
        if [ -x /sbin/insserv ] ; then
            /sbin/insserv -r %{_sysconfdir}/init.d/mysql
        # use chkconfig on Red Hat and newer SuSE releases
        elif [ -x /sbin/chkconfig ] ; then
            /sbin/chkconfig --del mysql
        fi
    fi
fi

# We do not remove the mysql user since it may still own a lot of
# database files.

# ----------------------------------------------------------------------
# Clean up the BuildRoot after build is done
# ----------------------------------------------------------------------
%clean
[ "$RPM_BUILD_ROOT" != "/" ] && [ -d $RPM_BUILD_ROOT ] && rm -rf $RPM_BUILD_ROOT;

##############################################################################
#  Files section
##############################################################################

%files server
%defattr(-,root,root,0755)

%doc mysql-release-%{mysql_version}/COPYING mysql-release-%{mysql_version}/README
%doc mysql-release-%{mysql_version}/support-files/my-*.cnf
%if %{CLUSTER_BUILD}
%doc mysql-release-%{mysql_version}/support-files/ndb-*.ini
%endif

%doc %attr(644, root, root) %{_infodir}/mysql.info*

%if %{INNODB_BUILD}
%doc %attr(644, root, man) %{_mandir}/man1/innochecksum.1*
%endif
%doc %attr(644, root, man) %{_mandir}/man1/my_print_defaults.1*
%doc %attr(644, root, man) %{_mandir}/man1/myisam_ftdump.1*
%doc %attr(644, root, man) %{_mandir}/man1/myisamchk.1*
%doc %attr(644, root, man) %{_mandir}/man1/myisamlog.1*
%doc %attr(644, root, man) %{_mandir}/man1/myisampack.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_convert_table_format.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_fix_extensions.1*
%doc %attr(644, root, man) %{_mandir}/man8/mysqld.8*
%doc %attr(644, root, man) %{_mandir}/man1/mysqld_multi.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqld_safe.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqldumpslow.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_fix_privilege_tables.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_install_db.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_secure_installation.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_setpermission.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_upgrade.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlhotcopy.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlman.1*
%doc %attr(644, root, man) %{_mandir}/man8/mysqlmanager.8*
%doc %attr(644, root, man) %{_mandir}/man1/mysql.server.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqltest.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_tzinfo_to_sql.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_zap.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlbug.1*
%doc %attr(644, root, man) %{_mandir}/man1/perror.1*
%doc %attr(644, root, man) %{_mandir}/man1/replace.1*
%doc %attr(644, root, man) %{_mandir}/man1/resolve_stack_dump.1*
%doc %attr(644, root, man) %{_mandir}/man1/resolveip.1*

%ghost %config(noreplace,missingok) %{_sysconfdir}/my.cnf
%ghost %config(noreplace,missingok) %{_sysconfdir}/mysqlmanager.passwd

%if %{INNODB_BUILD}
%attr(755, root, root) %{_bindir}/innochecksum
%endif
%attr(755, root, root) %{_bindir}/my_print_defaults
%attr(755, root, root) %{_bindir}/myisam_ftdump
%attr(755, root, root) %{_bindir}/myisamchk
%attr(755, root, root) %{_bindir}/myisamlog
%attr(755, root, root) %{_bindir}/myisampack
%attr(755, root, root) %{_bindir}/mysql_convert_table_format
%attr(755, root, root) %{_bindir}/mysql_fix_extensions
%attr(755, root, root) %{_bindir}/mysql_fix_privilege_tables
%attr(755, root, root) %{_bindir}/mysql_install_db
%attr(755, root, root) %{_bindir}/mysql_secure_installation
%attr(755, root, root) %{_bindir}/mysql_setpermission
%attr(755, root, root) %{_bindir}/mysql_tzinfo_to_sql
%attr(755, root, root) %{_bindir}/mysql_upgrade
%attr(755, root, root) %{_bindir}/mysql_zap
%attr(755, root, root) %{_bindir}/mysqlbug
%attr(755, root, root) %{_bindir}/mysqld_multi
%attr(755, root, root) %{_bindir}/mysqld_safe
%attr(755, root, root) %{_bindir}/mysqldumpslow
%attr(755, root, root) %{_bindir}/mysqlhotcopy
%attr(755, root, root) %{_bindir}/mysqltest
%attr(755, root, root) %{_bindir}/perror
%attr(755, root, root) %{_bindir}/replace
%attr(755, root, root) %{_bindir}/resolve_stack_dump
%attr(755, root, root) %{_bindir}/resolveip

%attr(755, root, root) %{_sbindir}/mysqld
%attr(755, root, root) %{_sbindir}/mysqld-debug
%attr(755, root, root) %{_sbindir}/mysqlmanager
%attr(755, root, root) %{_sbindir}/rcmysql
%if %{INNODB_BUILD}
%if %{WITH_INNODB_PLUGIN}
%attr(755, root, root) %{_libdir}/mysql/plugin/ha_innodb_plugin.so*
%endif
%endif
%attr(755, root, root) %{_libdir}/mysql/plugin/ha_example.so*

%attr(644, root, root) %config(noreplace,missingok) %{_sysconfdir}/logrotate.d/mysql
%attr(755, root, root) %{_sysconfdir}/init.d/mysql

%attr(755, root, root) %{_datadir}/mysql/

%files client
%defattr(-, root, root, 0755)
%attr(755, root, root) %{_bindir}/msql2mysql
%attr(755, root, root) %{_bindir}/mysql
%attr(755, root, root) %{_bindir}/mysql_find_rows
%attr(755, root, root) %{_bindir}/mysql_waitpid
%attr(755, root, root) %{_bindir}/mysqlaccess
%attr(755, root, root) %{_bindir}/mysqladmin
%attr(755, root, root) %{_bindir}/mysqlbinlog
%attr(755, root, root) %{_bindir}/mysqlcheck
%attr(755, root, root) %{_bindir}/mysqldump
%attr(755, root, root) %{_bindir}/mysqlimport
%attr(755, root, root) %{_bindir}/mysqlshow
%attr(755, root, root) %{_bindir}/mysqlslap

%doc %attr(644, root, man) %{_mandir}/man1/msql2mysql.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql_find_rows.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlaccess.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqladmin.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlbinlog.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlcheck.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqldump.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlimport.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlshow.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqlslap.1*

%post shared
/sbin/ldconfig

%postun shared
/sbin/ldconfig

%if %{CLUSTER_BUILD}
%files ndb-storage
%defattr(-,root,root,0755)
%attr(755, root, root) %{_sbindir}/ndbd
%doc %attr(644, root, man) %{_mandir}/man8/ndbd.8*

%files ndb-management
%defattr(-,root,root,0755)
%attr(755, root, root) %{_sbindir}/ndb_mgmd
%doc %attr(644, root, man) %{_mandir}/man8/ndb_mgmd.8*

%files ndb-tools
%defattr(-,root,root,0755)
%attr(755, root, root) %{_bindir}/ndb_config
%attr(755, root, root) %{_bindir}/ndb_desc
%attr(755, root, root) %{_bindir}/ndb_error_reporter
%attr(755, root, root) %{_bindir}/ndb_mgm
%attr(755, root, root) %{_bindir}/ndb_print_backup_file
%attr(755, root, root) %{_bindir}/ndb_print_schema_file
%attr(755, root, root) %{_bindir}/ndb_print_sys_file
%attr(755, root, root) %{_bindir}/ndb_restore
%attr(755, root, root) %{_bindir}/ndb_select_all
%attr(755, root, root) %{_bindir}/ndb_select_count
%attr(755, root, root) %{_bindir}/ndb_show_tables
%attr(755, root, root) %{_bindir}/ndb_size.pl
%attr(755, root, root) %{_bindir}/ndb_test_platform
%attr(755, root, root) %{_bindir}/ndb_waiter
%doc %attr(644, root, man) %{_mandir}/man1/ndb_config.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_desc.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_error_reporter.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_mgm.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_restore.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_print_backup_file.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_print_schema_file.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_print_sys_file.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_select_all.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_select_count.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_show_tables.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_size.pl.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_waiter.1*

%files ndb-extra
%defattr(-,root,root,0755)
%attr(755, root, root) %{_bindir}/ndb_delete_all
%attr(755, root, root) %{_bindir}/ndb_drop_index
%attr(755, root, root) %{_bindir}/ndb_drop_table
%attr(755, root, root) %{_sbindir}/ndb_cpcd
%doc %attr(644, root, man) %{_mandir}/man1/ndb_delete_all.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_drop_index.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_drop_table.1*
%doc %attr(644, root, man) %{_mandir}/man1/ndb_cpcd.1*
%endif

%files devel
%defattr(-, root, root, 0755)
%doc %attr(644, root, man) %{_mandir}/man1/mysql_config.1*
%attr(755, root, root) %{_bindir}/mysql_config
%dir %attr(755, root, root) %{_includedir}/mysql
%dir %attr(755, root, root) %{_libdir}/mysql
%{_includedir}/mysql/*
%{_datadir}/aclocal/mysql.m4
%{_libdir}/mysql/libdbug.a
%{_libdir}/mysql/libheap.a
%if %{WITH_LIBGCC}
%{_libdir}/mysql/libmygcc.a
%endif
%{_libdir}/mysql/libmyisam.a
%{_libdir}/mysql/libmyisammrg.a
%{_libdir}/mysql/libmysqlclient.a
%{_libdir}/mysql/libmysqlclient.la
%{_libdir}/mysql/libmysqlclient_r.a
%{_libdir}/mysql/libmysqlclient_r.la
%{_libdir}/mysql/libmystrings.a
%{_libdir}/mysql/libmysys.a
%if %{CLUSTER_BUILD}
%{_libdir}/mysql/libndbclient.a
%{_libdir}/mysql/libndbclient.la
%endif
%{_libdir}/mysql/libvio.a
%{_libdir}/mysql/libz.a
%{_libdir}/mysql/libz.la
%{_libdir}/mysql/plugin/ha_example.a
%{_libdir}/mysql/plugin/ha_example.la
%if %{INNODB_BUILD}
%if %{WITH_INNODB_PLUGIN}
%{_libdir}/mysql/plugin/ha_innodb_plugin.a
%{_libdir}/mysql/plugin/ha_innodb_plugin.la
%endif
%endif

%files shared
%defattr(-, root, root, 0755)
# Shared libraries (omit for architectures that don't support them)
%{_libdir}/libmysql*.so*
%if %{CLUSTER_BUILD}
%{_libdir}/libndb*.so*
%endif

%files test
%defattr(-, root, root, 0755)
%attr(-, root, root) %{_datadir}/mysql-test
%attr(755, root, root) %{_bindir}/mysql_client_test
%doc %attr(644, root, man) %{_mandir}/man1/mysql_client_test.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql-stress-test.pl.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysql-test-run.pl.1*
%if %{EMBEDDED_BUILD}
%attr(755, root, root) %{_bindir}/mysql_client_test_embedded
%attr(755, root, root) %{_bindir}/mysqltest_embedded
%doc %attr(644, root, man) %{_mandir}/man1/mysql_client_test_embedded.1*
%doc %attr(644, root, man) %{_mandir}/man1/mysqltest_embedded.1*
%endif

%if %{EMBEDDED_BUILD}
%files embedded
%defattr(-, root, root, 0755)
%attr(644, root, root) %{_libdir}/mysql/libmysqld.a
%endif

##############################################################################
# The spec file changelog only includes changes made to the spec file
# itself - note that they must be ordered by date (important when
# merging BK trees)
##############################################################################
%changelog
* Wed Sep 14 2011 Joerg Bruehe <[email protected]>

- Let the RPM capabilities ("obsoletes" etc) ensure that an upgrade may replace
  the RPMs of any configuration (of the current or the preceding release series)
  by the new ones. This is done by not using the implicitly generated capabilities
  (which include the configuration name) and relying on more generic ones which
  just list the function ("server", "client", ...).
  The implicit generation cannot be prevented, so all these capabilities must be
  explicitly listed in "Obsoletes:"

* Fri Aug 19 2011 Joerg Bruehe <[email protected]>

- Fix bug#37165 "((Generic rpm)) fail to install on Fedora 9 x86_64"
  On Fedora, certain accesses to "/var/lib/mysql/HOSTNAME.err" were blocked
  by SELinux policy, this made the server start fail with the message
      Manager of pid-file quit without updating file
  Calling "/sbin/restorecon -R /var/lib/mysql" fixes this.
- Replace occurrences of that path name by the spec file variable %{mysqldatadir}.

* Thu Jul 07 2011 Joerg Bruehe <[email protected]>

- Fix bug#45415: "rpm upgrade recreates test database"
  Let the creation of the "test" database happen only during a new installation,
  not in an RPM upgrade.
  This affects both the "mkdir" and the call of "mysql_install_db".

* Thu Feb 03 2011 Joerg Bruehe <[email protected]>

- Fix bug#56581: If an installation deviates from the default file locations
  ("datadir" and "pid-file"), the mechanism to detect a running server (on upgrade)
  should still work, and use these locations.
  The problem was that the fix for bug#27072 did not check for local settings.

* Wed Nov 24 2010 Alexander Nozdrin <[email protected]>

- EXCEPTIONS-CLIENT has been deleted, remove it from here too.

* Tue Jun 15 2010 Joerg Bruehe <[email protected]>

- Change the behaviour on upgrade:
  *Iff* the server was stopped before the upgrade is started, this is taken as a
  sign the administrator is handling that manually, and so the new server will
  not be started automatically at the end of the upgrade.
  The start/stop scripts will still be installed, so the server will be started
  on the next machine boot.
  This is the 5.1 version of fixing bug#27072 (RPM autostarting the server).

* Mon Mar 01 2010 Joerg Bruehe <[email protected]>

- Set "Oracle and/or its affiliates" as the vendor and copyright owner,
  accept upgrading from packages showing MySQL or Sun as vendor.

* Fri Feb 05 2010 Joerg Bruehe <[email protected]>

- Formatting changes:
  Have a consistent structure of separator lines and of indentation
  (8 leading blanks => tab).
- Introduce the variable "src_dir".
- Give the environment variables "MYSQL_BUILD_CC(CXX)" precedence
  over "CC" ("CXX").
- Drop the old "with_static" argument analysis, this is not supported
  in 5.1 since ages.
- Introduce variables to control the handlers individually, as well
  as other options.
- Handle the InnoDB plugin using a positive logic: "WITH_INNODB_PLUGIN",
  the old negative logic ("WITHOUT_INNODB_PLUGIN") was obfuscating.
- Use the new "--with-plugin" notation for the table handlers.
- Drop handling "/etc/rc.d/init.d/mysql", the switch to "/etc/init.d/mysql"
  was done back in 2002 already.
- Make "--with-zlib-dir=bundled" the default, add an option to disable it.
- Add missing manual pages to the file list.
- Improve the runtime check for "libgcc.a", protect it against being tried
  with the Intel compiler "icc".

* Mon Jan 11 2010 Joerg Bruehe <[email protected]>

- Change RPM file naming:
  - Suffix like "-m2", "-rc" becomes part of version as "_m2", "_rc".
  - Release counts from 1, not 0.

* Mon Aug 24 2009 Jonathan Perkin <[email protected]>

- Add conditionals for bundled zlib and innodb plugin

* Fri Aug 21 2009 Jonathan Perkin <[email protected]>

- Install plugin libraries in appropriate packages.
- Disable libdaemon_example and ftexample plugins.

* Thu Aug 20 2009 Jonathan Perkin <[email protected]>

- Update variable used for mysql-test suite location to match source.

* Fri Nov 07 2008 Joerg Bruehe <[email protected]>

- Correct yesterday's fix, so that it also works for the last flag,
  and fix a wrong quoting: un-quoted quote marks must not be escaped.

* Thu Nov 06 2008 Kent Boortz <[email protected]>

- Removed "mysql_upgrade_shell"
- Removed some copy/paste between debug and normal build

* Thu Nov 06 2008 Joerg Bruehe <[email protected]>

- Modify CFLAGS and CXXFLAGS such that a debug build is not optimized.
  This should cover both gcc and icc flags.  Fixes bug#40546.

* Fri Aug 29 2008 Kent Boortz <[email protected]>

- Removed the "Federated" storage engine option, and enabled in all

* Tue Aug 26 2008 Joerg Bruehe <[email protected]>

- Get rid of the "warning: Installed (but unpackaged) file(s) found:"
  Some generated files aren't needed in RPMs:
  - the "sql-bench/" subdirectory
  Some files were missing:
  - /usr/share/aclocal/mysql.m4  ("devel" subpackage)
  - Manual "mysqlbug" ("server" subpackage)
  - Program "innochecksum" and its manual ("server" subpackage)
  - Manual "mysql_find_rows" ("client" subpackage)
  - Script "mysql_upgrade_shell" ("client" subpackage)
  - Program "ndb_cpcd" and its manual ("ndb-extra" subpackage)
  - Manuals "ndb_mgm" + "ndb_restore" ("ndb-tools" subpackage)

* Mon Mar 31 2008 Kent Boortz <[email protected]>

- Made the "Federated" storage engine an option
- Made the "Cluster" storage engine and sub packages an option

* Wed Mar 19 2008 Joerg Bruehe <[email protected]>

- Add the man pages for "ndbd" and "ndb_mgmd".

* Mon Feb 18 2008 Timothy Smith <[email protected]>

- Require a manual upgrade if the alread-installed mysql-server is
  from another vendor, or is of a different major version.

* Wed May 02 2007 Joerg Bruehe <[email protected]>

- "ndb_size.tmpl" is not needed any more,
  "man1/mysql_install_db.1" lacked the trailing '*'.

* Sat Apr 07 2007 Kent Boortz <[email protected]>

- Removed man page for "mysql_create_system_tables"

* Wed Mar 21 2007 Daniel Fischer <[email protected]>

- Add debug server.

* Mon Mar 19 2007 Daniel Fischer <[email protected]>

- Remove Max RPMs; the server RPMs contain a mysqld compiled with all
  features that previously only were built into Max.

* Fri Mar 02 2007 Joerg Bruehe <[email protected]>

- Add several man pages for NDB which are now created.

* Fri Jan 05 2007 Kent Boortz <[email protected]>

- Put back "libmygcc.a", found no real reason it was removed.

- Add CFLAGS to gcc call with --print-libgcc-file, to make sure the
  correct "libgcc.a" path is returned for the 32/64 bit architecture.

* Mon Dec 18 2006 Joerg Bruehe <[email protected]>

- Fix the move of "mysqlmanager" to section 8: Directory name was wrong.

* Thu Dec 14 2006 Joerg Bruehe <[email protected]>

- Include the new man pages for "my_print_defaults" and "mysql_tzinfo_to_sql"
  in the server RPM.
- The "mysqlmanager" man page got moved from section 1 to 8.

* Thu Nov 30 2006 Joerg Bruehe <[email protected]>

- Call "make install" using "benchdir_root=%{_datadir}",
  because that is affecting the regression test suite as well.

* Thu Nov 16 2006 Joerg Bruehe <[email protected]>

- Explicitly note that the "MySQL-shared" RPMs (as built by MySQL AB)
  replace "mysql-shared" (as distributed by SuSE) to allow easy upgrading
  (bug#22081).

* Mon Nov 13 2006 Joerg Bruehe <[email protected]>

- Add "--with-partition" to all server builds.

- Use "--report-features" in one test run per server build.

* Tue Aug 15 2006 Joerg Bruehe <[email protected]>

- The "max" server is removed from packages, effective from 5.1.12-beta.
  Delete all steps to build, package, or install it.

* Mon Jul 10 2006 Joerg Bruehe <[email protected]>

- Fix a typing error in the "make" target for the Perl script to run the tests.

* Tue Jul 04 2006 Joerg Bruehe <[email protected]>

- Use the Perl script to run the tests, because it will automatically check
  whether the server is configured with SSL.

* Tue Jun 27 2006 Joerg Bruehe <[email protected]>

- move "mysqldumpslow" from the client RPM to the server RPM (bug#20216)

- Revert all previous attempts to call "mysql_upgrade" during RPM upgrade,
  there are some more aspects which need to be solved before this is possible.
  For now, just ensure the binary "mysql_upgrade" is delivered and installed.

* Thu Jun 22 2006 Joerg Bruehe <[email protected]>

- Close a gap of the previous version by explicitly using
  a newly created temporary directory for the socket to be used
  in the "mysql_upgrade" operation, overriding any local setting.

* Tue Jun 20 2006 Joerg Bruehe <[email protected]>

- To run "mysql_upgrade", we need a running server;
  start it in isolation and skip password checks.

* Sat May 20 2006 Kent Boortz <[email protected]>

- Always compile for PIC, position independent code.

* Wed May 10 2006 Kent Boortz <[email protected]>

- Use character set "all" when compiling with Cluster, to make Cluster
  nodes independent on the character set directory, and the problem
  that two RPM sub packages both wants to install this directory.

* Mon May 01 2006 Kent Boortz <[email protected]>

- Use "./libtool --mode=execute" instead of searching for the
  executable in current directory and ".libs".

* Fri Apr 28 2006 Kent Boortz <[email protected]>

- Install and run "mysql_upgrade"

* Wed Apr 12 2006 Jim Winstead <[email protected]>

- Remove sql-bench, and MySQL-bench RPM (will be built as an independent
  project from the mysql-bench repository)

* Tue Apr 11 2006 Jim Winstead <[email protected]>

- Remove old mysqltestmanager and related programs
* Sat Apr 01 2006 Kent Boortz <[email protected]>

- Set $LDFLAGS from $MYSQL_BUILD_LDFLAGS

* Wed Mar 07 2006 Kent Boortz <[email protected]>

- Changed product name from "Community Edition" to "Community Server"

* Mon Mar 06 2006 Kent Boortz <[email protected]>

- Fast mutexes is now disabled by default, but should be
  used in Linux builds.

* Mon Feb 20 2006 Kent Boortz <[email protected]>

- Reintroduced a max build
- Limited testing of 'debug' and 'max' servers
- Berkeley DB only in 'max'

* Mon Feb 13 2006 Joerg Bruehe <[email protected]>

- Use "-i" on "make test-force";
  this is essential for later evaluation of this log file.

* Thu Feb 09 2006 Kent Boortz <[email protected]>

- Pass '-static' to libtool, link static with our own libraries, dynamic
  with system libraries.  Link with the bundled zlib.

* Wed Feb 08 2006 Kristian Nielsen <[email protected]>

- Modified RPM spec to match new 5.1 debug+max combined community packaging.

* Sun Dec 18 2005 Kent Boortz <[email protected]>

- Added "client/mysqlslap"

* Mon Dec 12 2005 Rodrigo Novo <[email protected]>

- Added zlib to the list of (static) libraries installed
- Added check against libtool wierdness (WRT: sql/mysqld || sql/.libs/mysqld)
- Compile MySQL with bundled zlib
- Fixed %packager name to "MySQL Production Engineering Team"

* Mon Dec 05 2005 Joerg Bruehe <[email protected]>

- Avoid using the "bundled" zlib on "shared" builds:
  As it is not installed (on the build system), this gives dependency
  problems with "libtool" causing the build to fail.
  (Change was done on Nov 11, but left uncommented.)

* Tue Nov 22 2005 Joerg Bruehe <[email protected]>

- Extend the file existence check for "init.d/mysql" on un-install
  to also guard the call to "insserv"/"chkconfig".

* Thu Oct 27 2005 Lenz Grimmer <[email protected]>

- added more man pages

* Wed Oct 19 2005 Kent Boortz <[email protected]>

- Made yaSSL support an option (off by default)

* Wed Oct 19 2005 Kent Boortz <[email protected]>

- Enabled yaSSL support

* Sat Oct 15 2005 Kent Boortz <[email protected]>

- Give mode arguments the same way in all places
- Moved copy of mysqld.a to "standard" build, but
  disabled it as we don't do embedded yet in 5.0

* Fri Oct 14 2005 Kent Boortz <[email protected]>

- For 5.x, always compile with --with-big-tables
- Copy the config.log file to location outside
  the build tree

* Fri Oct 14 2005 Kent Boortz <[email protected]>

- Removed unneeded/obsolete configure options
- Added archive engine to standard server
- Removed the embedded server from experimental server
- Changed suffix "-Max" => "-max"
- Changed comment string "Max" => "Experimental"

* Thu Oct 13 2005 Lenz Grimmer <[email protected]>

- added a usermod call to assign a potential existing mysql user to the
  correct user group (BUG#12823)
- Save the perror binary built during Max build so it supports the NDB
  error codes (BUG#13740)
- added a separate macro "mysqld_group" to be able to define the
  user group of the mysql user seperately, if desired.

* Thu Sep 29 2005 Lenz Grimmer <[email protected]>

- fixed the removing of the RPM_BUILD_ROOT in the %clean section (the
  $RBR variable did not get expanded, thus leaving old build roots behind)

* Thu Aug 04 2005 Lenz Grimmer <[email protected]>

- Fixed the creation of the mysql user group account in the postinstall
  section (BUG 12348)
- Fixed enabling the Archive storage engine in the Max binary

* Tue Aug 02 2005 Lenz Grimmer <[email protected]>

- Fixed the Requires: tag for the server RPM (BUG 12233)

* Fri Jul 15 2005 Lenz Grimmer <[email protected]>

- create a "mysql" user group and assign the mysql user account to that group
  in the server postinstall section. (BUG 10984)

* Tue Jun 14 2005 Lenz Grimmer <[email protected]>

- Do not build statically on i386 by default, only when adding either "--with
  static" or "--define '_with_static 1'" to the RPM build options. Static
  linking really only makes sense when linking against the specially patched
  glibc 2.2.5.

* Mon Jun 06 2005 Lenz Grimmer <[email protected]>

- added mysql_client_test to the "bench" subpackage (BUG 10676)
- added the libndbclient static and shared libraries (BUG 10676)

* Wed Jun 01 2005 Lenz Grimmer <[email protected]>

- use "mysqldatadir" variable instead of hard-coding the path multiple times
- use the "mysqld_user" variable on all occasions a user name is referenced
- removed (incomplete) Brazilian translations
- removed redundant release tags from the subpackage descriptions

* Wed May 25 2005 Joerg Bruehe <[email protected]>

- Added a "make clean" between separate calls to "BuildMySQL".

* Thu May 12 2005 Guilhem Bichot <[email protected]>

- Removed the mysql_tableinfo script made obsolete by the information schema

* Wed Apr 20 2005 Lenz Grimmer <[email protected]>

- Enabled the "blackhole" storage engine for the Max RPM

* Wed Apr 13 2005 Lenz Grimmer <[email protected]>

- removed the MySQL manual files (html/ps/texi) - they have been removed
  from the MySQL sources and are now available seperately.

* Mon Apr 4 2005 Petr Chardin <[email protected]>

- old mysqlmanager, mysqlmanagerc and mysqlmanager-pwger renamed into
  mysqltestmanager, mysqltestmanager and mysqltestmanager-pwgen respectively

* Fri Mar 18 2005 Lenz Grimmer <[email protected]>

- Disabled RAID in the Max binaries once and for all (it has finally been
  removed from the source tree)

* Sun Feb 20 2005 Petr Chardin <[email protected]>

- Install MySQL Instance Manager together with mysqld, touch mysqlmanager
  password file

* Mon Feb 14 2005 Lenz Grimmer <[email protected]>

- Fixed the compilation comments and moved them into the separate build sections
  for Max and Standard

* Mon Feb 7 2005 Tomas Ulin <[email protected]>

- enabled the "Ndbcluster" storage engine for the max binary
- added extra make install in ndb subdir after Max build to get ndb binaries
- added packages for ndbcluster storage engine

* Fri Jan 14 2005 Lenz Grimmer <[email protected]>

- replaced obsoleted "BuildPrereq" with "BuildRequires" instead

* Thu Jan 13 2005 Lenz Grimmer <[email protected]>

- enabled the "Federated" storage engine for the max binary

* Tue Jan 04 2005 Petr Chardin <[email protected]>

- ISAM and merge storage engines were purged. As well as appropriate
  tools and manpages (isamchk and isamlog)

* Thu Dec 31 2004 Lenz Grimmer <[email protected]>

- enabled the "Archive" storage engine for the max binary
- enabled the "CSV" storage engine for the max binary
- enabled the "Example" storage engine for the max binary

* Thu Aug 26 2004 Lenz Grimmer <[email protected]>

- MySQL-Max now requires MySQL-server instead of MySQL (BUG 3860)

* Fri Aug 20 2004 Lenz Grimmer <[email protected]>

- do not link statically on IA64/AMD64 as these systems do not have
  a patched glibc installed

* Tue Aug 10 2004 Lenz Grimmer <[email protected]>

- Added libmygcc.a to the devel subpackage (required to link applications
  against the the embedded server libmysqld.a) (BUG 4921)

* Mon Aug 09 2004 Lenz Grimmer <[email protected]>

- Added EXCEPTIONS-CLIENT to the "devel" package

* Thu Jul 29 2004 Lenz Grimmer <[email protected]>

- disabled OpenSSL in the Max binaries again (the RPM packages were the
  only exception to this anyway) (BUG 1043)

* Wed Jun 30 2004 Lenz Grimmer <[email protected]>

- fixed server postinstall (mysql_install_db was called with the wrong
  parameter)

* Thu Jun 24 2004 Lenz Grimmer <[email protected]>

- added mysql_tzinfo_to_sql to the server subpackage
- run "make clean" instead of "make distclean"

* Mon Apr 05 2004 Lenz Grimmer <[email protected]>

- added ncurses-devel to the build prerequisites (BUG 3377)

* Thu Feb 12 2004 Lenz Grimmer <[email protected]>

- when using gcc, _always_ use CXX=gcc
- replaced Copyright with License field (Copyright is obsolete)

* Tue Feb 03 2004 Lenz Grimmer <[email protected]>

- added myisam_ftdump to the Server package

* Tue Jan 13 2004 Lenz Grimmer <[email protected]>

- link the mysql client against libreadline instead of libedit (BUG 2289)

* Mon Dec 22 2003 Lenz Grimmer <[email protected]>

- marked /etc/logrotate.d/mysql as a config file (BUG 2156)

* Fri Dec 13 2003 Lenz Grimmer <[email protected]>

- fixed file permissions (BUG 1672)

* Thu Dec 11 2003 Lenz Grimmer <[email protected]>

- made testing for gcc3 a bit more robust

* Fri Dec 05 2003 Lenz Grimmer <[email protected]>

- added missing file mysql_create_system_tables to the server subpackage

* Fri Nov 21 2003 Lenz Grimmer <[email protected]>

- removed dependency on MySQL-client from the MySQL-devel subpackage
  as it is not really required. (BUG 1610)

* Fri Aug 29 2003 Lenz Grimmer <[email protected]>

- Fixed BUG 1162 (removed macro names from the changelog)
- Really fixed BUG 998 (disable the checking for installed but
  unpackaged files)

* Tue Aug 05 2003 Lenz Grimmer <[email protected]>

- Fixed BUG 959 (libmysqld not being compiled properly)
- Fixed BUG 998 (RPM build errors): added missing files to the
  distribution (mysql_fix_extensions, mysql_tableinfo, mysqldumpslow,
  mysql_fix_privilege_tables.1), removed "-n" from install section.

* Wed Jul 09 2003 Lenz Grimmer <[email protected]>

- removed the GIF Icon (file was not included in the sources anyway)
- removed unused variable shared_lib_version
- do not run automake before building the standard binary
  (should not be necessary)
- add server suffix '-standard' to standard binary (to be in line
  with the binary tarball distributions)
- Use more RPM macros (_exec_prefix, _sbindir, _libdir, _sysconfdir,
  _datadir, _includedir) throughout the spec file.
- allow overriding CC and CXX (required when building with other compilers)

* Fri May 16 2003 Lenz Grimmer <[email protected]>

- re-enabled RAID again

* Wed Apr 30 2003 Lenz Grimmer <[email protected]>

- disabled MyISAM RAID (--with-raid) - it throws an assertion which
  needs to be investigated first.

* Mon Mar 10 2003 Lenz Grimmer <[email protected]>

- added missing file mysql_secure_installation to server subpackage
  (BUG 141)

* Tue Feb 11 2003 Lenz Grimmer <[email protected]>

- re-added missing pre- and post(un)install scripts to server subpackage
- added config file /etc/my.cnf to the file list (just for completeness)
- make sure to create the datadir with 755 permissions

* Mon Jan 27 2003 Lenz Grimmer <[email protected]>

- removed unused CC and CXX variables
- CFLAGS and CXXFLAGS should honor RPM_OPT_FLAGS

* Fri Jan 24 2003 Lenz Grimmer <[email protected]>

- renamed package "MySQL" to "MySQL-server"
- fixed Copyright tag
- added mysql_waitpid to client subpackage (required for mysql-test-run)

* Wed Nov 27 2002 Lenz Grimmer <[email protected]>

- moved init script from /etc/rc.d/init.d to /etc/init.d (the majority of
  Linux distributions now support this scheme as proposed by the LSB either
  directly or via a compatibility symlink)
- Use new "restart" init script action instead of starting and stopping
  separately
- Be more flexible in activating the automatic bootup - use insserv (on
  older SuSE versions) or chkconfig (Red Hat, newer SuSE versions and
  others) to create the respective symlinks

* Wed Sep 25 2002 Lenz Grimmer <[email protected]>

- MySQL-Max now requires MySQL >= 4.0 to avoid version mismatches
  (mixing 3.23 and 4.0 packages)

* Fri Aug 09 2002 Lenz Grimmer <[email protected]>

- Turn off OpenSSL in MySQL-Max for now until it works properly again
- enable RAID for the Max binary instead
- added compatibility link: safe_mysqld -> mysqld_safe to ease the
  transition from 3.23

* Thu Jul 18 2002 Lenz Grimmer <[email protected]>

- Reworked the build steps a little bit: the Max binary is supposed
  to include OpenSSL, which cannot be linked statically, thus trying
    to statically link against a special glibc is futile anyway
- because of this, it is not required to make yet another build run
  just to compile the shared libs (saves a lot of time)
- updated package description of the Max subpackage
- clean up the BuildRoot directory afterwards

* Mon Jul 15 2002 Lenz Grimmer <[email protected]>

- Updated Packager information
- Fixed the build options: the regular package is supposed to
  include InnoDB and linked statically, while the Max package
    should include BDB and SSL support

* Fri May 03 2002 Lenz Grimmer <[email protected]>

- Use more RPM macros (e.g. infodir, mandir) to make the spec
  file more portable
- reorganized the installation of documentation files: let RPM
  take care of this
- reorganized the file list: actually install man pages along
  with the binaries of the respective subpackage
- do not include libmysqld.a in the devel subpackage as well, if we
  have a special "embedded" subpackage
- reworked the package descriptions

* Mon Oct  8 2001 Monty

- Added embedded server as a separate RPM

* Fri Apr 13 2001 Monty

- Added mysqld-max to the distribution

* Tue Jan 2  2001  Monty

- Added mysql-test to the bench package

* Fri Aug 18 2000 Tim Smith <[email protected]>

- Added separate libmysql_r directory; now both a threaded
  and non-threaded library is shipped.

* Wed Sep 28 1999 David Axmark <[email protected]>

- Added the support-files/my-example.cnf to the docs directory.

- Removed devel dependency on base since it is about client
  development.

* Wed Sep 8 1999 David Axmark <[email protected]>

- Cleaned up some for 3.23.

* Thu Jul 1 1999 David Axmark <[email protected]>

- Added support for shared libraries in a separate sub
  package. Original fix by David Fox ([email protected])

- The --enable-assembler switch is now automatically disables on
  platforms there assembler code is unavailable. This should allow
  building this RPM on non i386 systems.

* Mon Feb 22 1999 David Axmark <[email protected]>

- Removed unportable cc switches from the spec file. The defaults can
  now be overridden with environment variables. This feature is used
  to compile the official RPM with optimal (but compiler version
  specific) switches.

- Removed the repetitive description parts for the sub rpms. Maybe add
  again if RPM gets a multiline macro capability.

- Added support for a pt_BR translation. Translation contributed by
  Jorge Godoy <[email protected]>.

* Wed Nov 4 1998 David Axmark <[email protected]>

- A lot of changes in all the rpm and install scripts. This may even
  be a working RPM :-)

* Sun Aug 16 1998 David Axmark <[email protected]>

- A developers changelog for MySQL is available in the source RPM. And
  there is a history of major user visible changed in the Reference
  Manual.  Only RPM specific changes will be documented here.